PO Workflow triigered twice

Hi,
I am doing one workflow for PO creation. I am using the event RELEASESTEPCREATED from BO BUS2012. But, the issue is that the workflow is getting triggered twice. I checked tcode SWEL and found that the event RELEASESTEPCREATED is created twice. What could be the reason? Please do help.
Regards,
Jubish

Hi
I checked tcode SWEL and found that the event RELEASESTEPCREATED is created twice
Can you please tell me what is the business process that has been carried out.
I think once Double click on the entries and check if it the same user by whom the event got triggered as its standard one.. some other user of the same landscape can process it.
Revert with the status.
Regards
Narin

Similar Messages

Workflow Triggering twice when executing transaction cj21n

Hi Experts,
when i am executing transaction cj21n my workflow is triggering twice but earlier it was working fine ..
please provide your input on the same
Thanks
Deepanker Dwivedi

Hi,
The 'event' which mapped to workflow triggered twice or another event may added to the workflow
1) Did you give additional event for the workflow in the Basic Data -> Start events, if yes remove that event and test it.
2) If 'No', In the SPRO configurations some settings might have changed, Check with your Function Consultant ask any changes they done in the SPRO settings related to the T.code cj21n.
Regards,
Surjith

Workflow appearing twice in SQL

I recently checked up on
workflow performance after an extended parental leave and found that one of the workflows appeared twice in the DB.
The functioning workflow had a watermark being just one or two transactions behind, but the other was behind by what I guess is the time I implemented the workflow (which means several months by now). Both workflows have the same exact ruleid. Funny
thing is the RuleLastModified is only off by around 100 milliseconds.
The stuck workflow has no Relationship type ID nor a Related type ID.
Not sure where to go from here in order to remove this errornous subscription state (except deleting the errornous row).
http://codebeaver.blogspot.dk/

Hi
Not very much sure what are you referring to here.
But based upon the partner function procedure assigned to transaction type you get the list of partner in the ticket
so if you have z transaction type with all partners so you are getting the entire set of partner including z and standard
so decide as per requirement which one you want and then enhance the z partner profile and further assign it to custom transaction type
regards
prakhar

Workflow triggerred twice

Using BO ADDRESSEMP change event to trigger the workflow. but the workflow triggerred twice by BO ADDRESSEMP and BO ADDREMPUS the latter one is the subtype of the former one.
I am curious to know, why this happens. I have checked the related event linkage table , only ADDRESSEMP is maintained, then why ADDREMPUS is faired?

Hi,
Normally it's standard behavior for the workflow to be triggered both supertype and subtype, when the triggering event is based on the subtype. And if you want to restrict that behavior you have to use receiver type function module.
It should work properly if you still use the triggering event based on the supertype. However from your explanation it looks like that you have used supertype event and yet it triggers your subtype.
Could you please elaborate your issue further?
Regards,
Lim...

Workflow triggered twice. Triggered using Message Control/Output Types

I created an output type for VA01. After creating (then saving) SO, workflow is immediately triggered which shouldn't be the case since I have to run program 'rsnast00' to trigger workflow. So workflow is triggered twice during the process. How do i fix this?
DATA:
dispatch time = 'send with periodically schreduled job'
application = 'v1'
transmission medium = 'events'
processing 1
program = 'RSWEMCO1'
form routine = 'CREATE_EVENT'

May be the workflow is triggered in such a way that when ever out put type is created then the workflow must be triggered.
As the purpose of the report stated by the SAP is
Purpose
Issues output from all applications with send times 1 and 2.
May be the output type is created twice but the output of the report is not Duplicated. ( mentioned by SAP ) check the documentation of the report.

SAP Workflow Trigger Twice

Dear all,
I have created enh. spot PT_GEN_REQ. When I debug by creating infotype 2001 (absense) in PTARQ, my BADI was invoked twice causing 2 same workflows were triggered. Any idea? There was not such problem in 700 or 702 release. However, problem in 740 now.
Many thanks!
Anne

Hi Anne,
When you debug, can you see in the callstack where / why the BADI is being called twice?
Hard to imagine what the cause might be - I assume you didn't implement the BADI twice..
cheers
Paul

Workflow triggered twice !

Hi Guys,
My Workflow has been triggered 2 times.
It has two starting events.
BUS2081 - BLOCKEDPRICE
BUS2081 - BOLCKEDQUANT
When the Invoice has been saved, sometimes both the events are triggered so the workflow.
Is there any way I can limit this to one time, eventhough when 2 events triggered.
Thanks

Hello,
I believe the problem is that there are events A and B and he wants the wf triggered when A or B, but not twice.
You could build a check into the workflow to see if there is aother workflow running with the same key, but maybe someone can think of a more elegant solution.
regards
Rick Bakker
Hanabi Technology

PR release workflow triggers twice

Hello Friends,
I had created a custom workflow for the item wise release of Purchase Requisition(PR). 2 levels of release are needed for all items whose value is above a particular amount.
My problem is that, for all items in PR which requires 2 levels of release will generate 2 similar work items in agent's inbox. Even if we complete a work item execution, the other will remain in the inbox as not started.
I had used SWE2 to find anything is wrong with the event linkages. There it shows a linkage to the event 'RELEASESTEPCREATED' of BUS2009 to my custom workflow only. Similerly I used SWEC to find any linkages there. There also I can't find anything wrong.
Then I had used SWEL. I got the following result for a PR that contains only one item which requires 2 levels of release:
BUS2009       RELEASESTEPCREATED     04.11.2011     16:34:07     WS90000044
BUS2009   RELEASESTEPCREATED     04.11.2011     16:34:08     WS90000044
Is there anything else that I had to do? Can someone tell me what I had to do to correct this issue?
Please help me to solve this problem as soon as possible.
Regards,
Abijth

Hello Suresh, Rick & Deepak,
Thanks for your prompt replies.
Suresh, you were right. The workitems in one agents inbox is having different workitem IDs and the Release code, which is an import parameter of the event 'RELEASESTEPCREATED' is also different. I checked SPRO. There exists only one release group for PR which is 01. The other release group is for PO, which is 02. SWEC does not contain an event linkage for BUS2009.
Deepak, SWEC does not contain an event linkage for BUS2009. In our scenario the release strategy is setup as follows:
01     01     ZMAR value < 50,000
01     02     ZMAR value > 49,999
01     03     ZCAP value < 50,000
01     04     ZCAP value > 49,999
01     05     ZOTH value > 9,999
Rick, can you please help me to identify what is the config. issue, so that I can workout that with our functional guys.
Thanks & Regards,
Abijith

SPD Workflow executing twice on Wait for field change

I have a workflow where I have a Wait for field change action. Once the field is changed it sends an email. But it also goes back through the whole workflow again. So it sends 2 emails. How do I correct?
The workflow is set to run on item created and item changed.

I'm not sure wait for field change will work. This action requires you to wait until it equals a specific value, rather than just for the field to change. So if you want approve or deny, this won't work because you can only wait for it to be approved or
wait for it to be denied, not both. Basically, just as you say.
I would just have stages ("Awaiting Department 1", "Awaiting Department 2", etc) that is a hidden choice field set by the workflow. Choice fields then for each department for their approval. Conditions on the workflow fire based on the Awaiting Department
field.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Workflow appears twice

Dear all:
an Invoice patch's workflow approved once, but appear again, I have to approve it again. Why does it happen?
My environment is : EBS 11.5.9 Linux Red hat 3.0
Workflow version 2.6
Regards
Chen Tong

Dear Hussein:
an Invoice patch's workflow approved once, but appear again, I have to approve it again. Why does it happen?Was this working properly before? If yes, any changes have been done recently?Yes, the db down during this week.
Can you find any error/warning messages in the workflow log file?--Where is the workflow log file ?
>
Do you use AME?-- what is AME?
>
Please mention the steps you follow to reproduce the issue.-- 1) approve the invoice
2) the status show "APPROVED"
3) query again
4) find the there are 4 rows, two of them I've APPROVED. two of them is "PENDING" . I have to approve manually again.
Regards
Terry

Workflow variables

While I've been maintaining SharePoint servers for a log time, only recently i started to dab into workflows. I am struggling to understand how data is passed from the "collect data from user". For example if I want to collect car_type,
car_color, and car_value from the user, I will assign these variables in the task, then set it to car:ID as the place holder. When is time to email someone the info, i can't seem to find the correct car:id and values within the car: id. Any
help would be greatly appreciated.

Hi John and thanks for your reply. This is the same document i am trying to follow.
1. I have followed the document to the letter. The problem is when set and done, in the "Define Workflow Lookup" i do not get the source as task. I am using designer 2013 but all my workflows are created on 2010 platform. My
screen looks like:
Data Source: "Association:Task List" is the only lookup available field i can return "Review Status"
2. The bottom data binding is even more confusing:
There is no "workflow data" field available. I only have "Workflow ID, Workflow list ID, and Workflow name" which none returns the correct values.
3. The document describes getting and storing two string Values " Reject and approved". But following the document I don't see this happening. I am guessing that I have to use the "set workflow variables" twice: one
for approved and one for reject to use at the later time.
Greatly appreciate for any help.

Prevent Sharepoint 2010 workflow to send duplicate emails

I have SharePoint 2013 as environment but am using SharePoint 2010 workflow on a list. There is a field in this list called "Order Status" which has different status such as Processing, Shipped, Cancelled, Hold. There is another list which updates
this Order Status. I have the workflow send out an email when the Order Status changes to Processing and another email when Order Status changes to Shipped.
The issue is that there are multiple emails being sent out when any of these status changes to either Processing or Shipped. There is no other workflow attached to this list
How do I prevent the workflow to send duplicate emails? I have seen that a flag could be setup to track the email sent once but that method does not work correctly and it still sends out duplicate emails. Or maybe I am not doing this correctly
Any suggestions, comments or have anyone resolved this successfully
Thanks Snehal H.Rana SharePoint Consultant

Hi Snehal
If you check the workflow history, you will probably see that every time an item is added or modified, the workflow runs twice. That’s why you’re receiving two email notifications.
The reason for this is timing. If your workflow is very short and the SharePoint server is very slow, the first instance of the workflow may finish well before the item is fully saved and committed to SharePoint. As the item is being processed, the workflow
event receiver can fire again, and start another instance of the workflow.
The solution for this problem is to add a step at the end of your workflow which will pause the workflow for a few minutes .
Another Option is to use a Flag.For Setting up flag correctly check the following link
http://www.mssharepointtips.com/tip.asp?id=1145
Please 'propose
as answer' if it helped
you, also 'vote
helpful' if you like this
reply
Amit Kotha

How to de-schedule a background job?

Dear all,
     I have scheduled a background ABAP report titled ZHRWFIT19 at SM36 to trigger a workflow.
     Initially I scheduled this background job to 9 A.M.
     Later I changed to schedule this background job to 10 A.M at SM37.
     Now my workflow triggers twice i.e., at 9 A.M. once and 10 A.M once.
     I want it to start at 10 A.M. only.Though I changed the schedule time to 9 A.M. to 10 A.M, still my background job triggers the
     workflow at 9 A.M. and 10 A.M.
     How to de-schedule this background report at 9 A.M.?
     Please suggest for which I will be grateful forever.
Thanks and regards,
S.Suresh

Dear Shastri,
         Thank you so much for your reply.
         As you have rightly pointed, I have 2 entries with same background job at SM37.That's why my workflow triggers twice.Now I want to permanently delete the background job entry at SM37 which triggers my workflow at 9 A.M.
        I couldn't delete this entry at SM37 permanently.Please suggest me how to permanently delete the entry that triggers the workflow at 9 A.M., for which I will grateful.
Thanks and regards,
S.Suresh

List workflow with "Start workflow when an item is changed" will run twice when creating a new wiki page

I have created the following workflow on the wiki page library to run when an item is changed:-
And it will send emails as follow:-
Currently when a user creates a new wiki page and he enters the wiki page name.
Then he enters the content and click on save.
Then two duplicate emails from the workflow will be sent ? So can anyone advice why creating a new wiki page will fire the workflow twice ?
Thanks

Hi john
Have you see the library where the wiki pages are stored. You can see how many occurrences of the workflow has been run.
Anyway, instead of using "wait for", can we put a condition that says, if Assign To:Approver is not empty. then email.
i use if instead of wait and it worked well, thanks

Workflow event bus1022-created triggered twice with ME21Nu200F

Hi everybody
The explanation to my problem is as follow: Initially I was using the Tcode AS01, ME21N, ABUMN to create fixed assets and every asset created triggers the event BUS1022-CREATED, but then I set the system to synchronizing assets with equipments (SPRO -> Financial accounting->Assets accounting->Master Data->Automatic creation of equipment master recordsu2026u2026) but the event BUS1022-CREATED didn´t triggered any more so I create the new entry in SWEC with ANLA as objet of modification and the OBJ BUS1022 and the event CREATED for the creation for any new record; It works but now the problem is that this event is being created twice with the Tcode ME21N.
Any suggestion?
Thanks a lot.
Felipe Uribe

Hello Felipe,
a check on the TCode during the event coupling seems to be the most effective way here. However, only checking on sy-tcode will not help you much, as you don't know the source (change document / application event).
So what you need to round up your work-around is a flag in the event container that tells you, if the event was created through the SWEC, and if yes, by which transaction code.
- To do so, create a subtype of BUS1022 with a system wide delegation.
- Create two new additional event parameters: TransactionCode (type syst-tcode) and ByChangeDocument (type boole-boole)
- Create a function module Z_SWEC_CONTAINER_BUS1022 copied from SWE_CD_TEMPLATE_CONTAINER_FB (or SWE_CD_TEMPLATE_CONTAINER_FB_2 depending on your ABAP OO experiences) and enter this function module under "Event container" in the maintenance entry of SWEC/BUS1022/CREATED
- Within that event container function module, you just set the two event container elements using the value of SY-TCODE for the field TransactionCode and a fixed 'X' for the value of the field ByChangeDocument
- Create a new check function module (or workflow start condition) -- as described earlier in this thread -- that checks on:
( ByChangeDocument = 'X' AND TransactionCode = 'ME21N' ) OR ( ByChangeDocument = ' ' ).
This way you'll sort out the doubled events through the change document for all other transactions than ME21N.
Good luck,
Florin

PO Workflow triigered twice

Similar Messages

Maybe you are looking for