PO - workflow -- urgent pls

Hello all
I need to develop a simple report to show, how many PO's are in waiting to be approved by the supervisor.
Eg.
There are more than 25 clerks, and 5 supervisors , So each clerk will be creating the PO's and they are in the inboxes of their respective supervisors.
If we need to find out exactly how many POs are there still in waiting to be approved.
How can we get this info? Can anyone please suggest which tables should we look at?
Thanks
Krisna

Hi Krishna,
No need to customize a report, try to use standard t-code like
ME2N- Purchasing Doc by Document Num
Goto Dynamic selection-Purchasing Doc Header
Select:
1.Rel strategy (choose the HOD)
2.Rel indicator (X-Blocked)
3.Created BY(your option if you want to see who created the PO)
Hope this help you.
Regards,
Maia

Similar Messages

Accounting docs created through Workflow ---- Urgent pls

Can anyone please let me know how do we know if any particular document has been created through workflow?
Eg.
1. Lets say one clerk posts a document and number 1000001 is generated.
2. Clerk parks a document - Supervisor gets email thru workflow and he posts the document. 1000002 is generated.
So in the above case, is there any identifier(Field) from any table using which we can findout how many documents were created through work flow - Case 2.
Thanks
Bala

First instinct would be to check BKPF to see if there is anything obvious at you site that shows this e.g. Tcode. Otherwise I'd suggest (a) see if change history reflects this (BSTAT changes from V to space when posted), or (b) look for the workflow container data in tables sww_contob & swwwihead.
Jonathan

I have a MacBook Pro 13.3 OS- MAC OS X LION.Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.

I have a MacBook Pro 13.3 OS- MAC OS X LION.
Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
Thank you for any help in this regard that comes fast.

The details of the kernel-panic report is as follows-
Interval Since Last Panic Report: 1458653 sec
Panics Since Last Report:          6
Anonymous UUID:                    70BA6A**************************************************
Sun Sep 16 23:00:13 2012
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
R8: 0xffffff80ef3d3f08, R9: 0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80ef3d3a50 : 0xffffff8000220792
0xffffff80ef3d3ad0 : 0xffffff80002c4794
0xffffff80ef3d3c80 : 0xffffff80002da55d
0xffffff80ef3d3ca0 : 0xffffff8000290560
0xffffff80ef3d3dc0 : 0xffffff800026c9c3
0xffffff80ef3d3f40 : 0xffffff80002c3fbb
0xffffff80ef3d3fb0 : 0xffffff80002da481
BSD process name corresponding to current thread: fsck_hfs
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 4850001132
last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
loaded kexts:
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2
com.apple.driver.AppleUSBTCButtons    227.6
com.apple.driver.AppleUSBTCKeyEventDriver    227.6
com.apple.driver.AppleUSBTCKeyboard    227.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.0.4
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.driver.AirPort.Brcm4331    560.7.21
com.apple.driver.AppleSDXC    1.2.2
com.apple.driver.AppleUSBHub    5.0.8
com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleAHCIPort    2.3.0
com.apple.driver.AppleUSBEHCI    5.0.7
com.apple.driver.AppleUSBXHCI    1.0.7
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleUSBBluetoothHCIController    4.0.7f2
com.apple.iokit.IOBluetoothFamily    4.0.7f2
com.apple.driver.AppleFileSystemDriver    13
com.apple.driver.AppleUSBMultitouch    230.5
com.apple.driver.AppleThunderboltDPInAdapter    1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.0.7
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.driver.AppleThunderboltNHI    1.6.0
com.apple.iokit.IOThunderboltFamily    2.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOUSBFamily    5.0.8
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.5
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4

Global_attribute20 field in ap_payment_schedules_all table - Urgent Pls

All,
Version: 11.5.10.2
I created an invoice, from the 'Scheduled Payments' tab I checked the 'Hold' flag. After the flag is checked in the UI, I noticed the global_attribute20 field in the ap_payment_schedules_all updates to 'EP' along with the hold_flag='Y'. I want to know the significance of global_attribute20 and what are all the other possible values of this field like 'EP'??
this is quite urgent, pls help.
rgds
sen

Have you tried to enable trace on this form to find out how this column gets populated?
FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1] -- 3. How does one enable trace in the Oracle Application screens / forms?
Can you reproduce the issue with other invoices?
Do you have any other instance where you can try the same and see if the issue is reproducible?
Thanks,
Hussein

Routine in Bex - urgent pls.

I have 2 columns A and B in the report:
A     B     C
1234     1234     1234
5903     0     5903
0     3287     3287
I want to get the column C.
So, the condition for the column C would be :
if A<>0 and B <>0 then A
else if A==0 then B
else if B==0 then A
I heared that this can be done by routines . I need the code to do this . Also let me know where to put the code.
This is urgent pls.
Vaishali

Hi,
No need to write coding.....directly u can get these by unsing formula as told in the above forum....there u get all these conditions in Boolean operators. so just make use of them..
Thanks & Regards

Depreciation Posting in AFAB (urgent Pls)

Hi All,
pls let me know y the depreciation posting is not hapenning when it is showing Document created in Test run. It is not showing any errors nor is it posting. urgent pls.
Chatura.

Hi,
Thanks for replying. It did not create any RABUSH Session .
1) I created an Asset and gave the Depreciation Start date as 01.09.07.
2) then i posted an entry in F-90 with transaction type 100, on 01.09.07.
3) The periods are kept open only.
4) The number Ranges for AF Document exists.
5)i did an unplanned posting run for 1 to 8 periods. for 9th period i did the Repeat run . It generated an accounting entry with AF document type.
6) now if i'm trying to do the test run for 10 th period it shows that the Document is created but in the repeat run it is neither posting the document nor is it showing the error.
I was not able to analyse the reason.
Pls help me out. Also pls let me know where to select the direct FI posting in asset accounting. Points will be awarded infull if the issue is solved.
Regards,
Chatura.

I need one recurcive(unended loop) pl/sql example, its very urgent pls

Hi,
I need one recurcive (unended loop) pl/sql example, its very urgent pls
Thanks,
Sathis.

I suppose you'll want to know how to get out of your undended loop too (although that does stop it being unended).
Example...
SQL> ed
Wrote file afiedt.buf
1 DECLARE
2    v_cnt NUMBER := 0;
3 BEGIN
4    LOOP
5      EXIT WHEN v_cnt = 1000;
6      v_cnt := v_cnt + 1;
7    END LOOP;
8* END;
SQL> /
PL/SQL procedure successfully completed.
SQL>

Its urgent pls help me .

how can i call a portal from webdynpro application
my requirment is
i was created webdynpro application.
in that i was created one view . in that i was created one button (go).
if i click that button i want move some other portal.
how can i acchive pls help me.
its urgent.
pls send any example programe
Message was edited by:
madipadiga nagaraju
Message was edited by:
madipadiga nagaraju

hi,
there is no direct tcode for going to webdynpro component/interfaces in ecc 6.0.
but u have se58 in ecc 5.0,as webdynpro convertor.u give ur program name and click web dynpro convertor button then it takes u to se80 .but this wda(webdynpro abap) component comes as in application tree hierarchy .
i can say in wda component refers a class .if u select webdynpro component/interface,it ask u to create a class or interface.
after that it automatically generate component controller(it is also a class),
interface view and windows.all these 3 are classes.for every window one interface view will be created.ie.. window is internal visible where as interface view is external visible.
u create view and embed these views in windows.by going to the window layout,right click on the window name and click embed view.u can enbed as many view as u wish.in order to navigate from one view to other view ,click "create navigation" by right clicking the view plugs.
by default windows and view have inbound plugs.this is literally a event of that class.
if u want to navigate from view1 to view2 ,create outbound plug for view1,the click outbound plug of view1 and right click the click create navigation the select inbound plug of view2.
then create a application .this is simillar of creating an object.
click on this object and test .this will open in browser.
for deploying u have use "sap webdynpro iview".

Telnet connection---urgent pls

each time i try to telnet using my LAPTOP.I get command not recognised.can somebody help me out now.Other PC works except mine.This is very urgent pls.

Download Putty
Search on google " Putty ".... using putty telnet.
You can open Hyperterminal and choose TCP/IP option instead of COM1.
Click on OK
You will telnet into device.
Putty use is very good very secure.
Regards,
Dharmesh Purohit

How can i detect if my PC is not on Network..... Urgent Pls Help Soon !!!!!

Hello Everyone,
We all know whenever we try to connect to a PC which is not on network, we get UnKnownHostException etc..... by which we can detect that the corresponding PC is not an network(intranet/internet)
But when i send a msg from my PC to my PC, it works fine even if the network is down. I hv provided my PC's IP address instead of using localhost or 127.0.0.1 which reduces the possibility that the msg will not be traversed thru the network.
Any IDEA how this works.
Is There any possible way by which i can detect that my PC is not on network or the PC to which i'm trying to connect is not on network .......
Pls help me out, its really urgent as to be implemented in my Project
Thanks In Advance
Sahil Shaikh

Hello Surtee
I have developed a Messeging Service for the eCRM Apllication my company is developing and we r in the final stage of debugging.
Now whenever a user sends a msg to a PC which is not on network, the messaging service automatically sends an Offline mssg to that PC. But know i want ot distinguish wheather the PC to which i'm sending the msg is not on network or am I not on network based on this i need to perform diff. actions, hence i wanted to know that how can i detect .......
Pls see if u canhelp me out ......
Thanks
Sahil Shaikh

Hi All difference between abap and hr-abap urgent pls

Hi All difference between abap and hr-abap urgent pls

Hello,
To add to the above points regarding infotypes
Infotypes stand apart in HR and manage a volume of data in HR domain..they are unique to HR module ranging from basic employee information to time management and finally the custom infotypes.....
Payroll and other monetory activities related to an employee also form a vital part of the HR module....
while considering Reports..in HR data is mainly with respect to infotypes and the concept of PAKEY...7 key fields which uniquely defines any record in an infotype is used..with Pernr(employee number),Begda(begindate) and Endda(enddate) form an integral part of the key..Based on the time constraints(1,2,3) of an infotype the keys are judged (to retrieve data from an infotype)
In ABAP HR we also have lots of predefined function modules that can be used..eg:go to se37..put 'HR*' and press F4...
finally to update an HR infotype record we use the function module hr operation rather than direct updates...also there are standard audit trail reports that monitors various activities such as insert/modify/delete operations on an hr infotype record...
Pls revert back for clarity and reward if helpful
Regards
Byju

Very urgent --pls help Report Painter Problem,

Hi to all,
I have created 5 operating expenses report by cost centres through report painter. some for full period , some for actual and sone for budget.
Under one set of that cost centre reports I have many subsets under which there are cost centre groups and then the cost centres.
I want to add one more set to existing set. I have added the set and set contains one cost centre group and their are also cost centres under it.
The table which i am using for cost centre grous is GLT1 and field is RCNTR and for cost centres it is CCSS and KOSTL respectively.
In the above procedure I have two queries.
1)even after adding the set and when i try to execute the report from T- code SERP it doesnot show my created set in variation.
2)Also even if it was showing the set earlier but report was showing zero values. When i clicked on zero amount a pop up arises for plan and actual values and when i clicked on plan values it had value of Rs 255000(for cost centres). then outside why this amount doesnot appears.
PLS THIS IS VERY VERY URGENT
Regards
TANUJA

I've just read this thread three times and I have absolutely no idea what you are doing, in what version, and what you are asking for help with.
Do you want to change the message type? If you do you MUST drop the queue and start over again from the beginning.
Do you want to enqueue messages?
Post your DDL and other relevant information or you are on your own. We can not guess at your issue.

Problem on loading applet netscape4.73 in macos9 very urgent pls help me

Hello,
Problems on loading applet in Netscape4.73(jre1.1.5) AppleMac OS-9.
when i try to load applet of size ~ 200kb in Netscape 4.73 AppleMac os9, then browser abruptly closing with the AppleMac os error message :- the Applicarion " Netscape Communicator " has unexpectedly quit because an error of type 2 occured. And then asking for system restart.
Since i am new to the AppleMac environment i cant adjust the settings please help me to overcome the problem. Its Very urgent and i am in great hurry pls.
thanks in advance.
Rao. V.N.

Hi Rao,
I'm not a mac-os specialist (even I had some business with mac !!), and it is very difficult speaking in blind, but I have severals questions that may help you.
- Did you try you applet in other AppleMac plateform ?
- Does your applet work fine in other browser/plateform ?
- Does a small applet work fine on this plateform with this browser ?
- Does you applet contains instructions like System.exit, System.* or try to access (read or write) to local files ?
Otherelse it is possible you have problem with your jre config, try to configure your plugin with command like : -Xmx64m -Xms16m
(These commands tell the plugin to use at least 16 Mo memory and 64 Mo for the maximum see : http://java.sun.com/docs/hotspot/gc/)
Hope that will help you

Very Urgent Pls help : Change of payload type to user-defined types

Hello Experts
I was using sys.xml_type as payload type in my queue table creation.
consider xml message
<order>
<id>1</id>
<load rerer="mq" erere='gg" > </load>
</order>
This i inserted into queue table using enqueue process.
this is done.
BUT NOW My manager wants to change the payload type.
he created a type
create or replace type systype as object (msg varchar2(4000));
Now payload type of queue table is changed to
PayloadType==>aq.systype.
Pls help me how can i insert xml messages into this queue table.
This is very urgent. Pls help me
S

I've just read this thread three times and I have absolutely no idea what you are doing, in what version, and what you are asking for help with.
Do you want to change the message type? If you do you MUST drop the queue and start over again from the beginning.
Do you want to enqueue messages?
Post your DDL and other relevant information or you are on your own. We can not guess at your issue.

Urgent pls: Automatic mailing of Reports thru BDC recording

Hi Gurus..
Please guide me for the possibility of creating a Z program which should call the T. Code, supply parameters for execution & sending output by email.I
need to execute 3 processes thru a single a program ..
1. get the distribution list
2. call the respective Tcode
3. running the background job for saving the variant & passing it.
Do I need to do recording thru BDC for each of them?
How can i do so in this manner..kindly guide me..
Pls experts need urgent help in this..
Thanks..
Himayan

Hi,
If the transaction codes you are referrring are associated to report programs, do as below:
1. Submit required program with addition Exporting list to Memory.
2. Read the list to an internal table
3. Use the data to send as mail attachments.
Check code samples in the below thread should you require the info:
[Sending External mails with attachments|Re: events]
Kind Regards
Eswar

PO - workflow -- urgent pls

Similar Messages

Maybe you are looking for