POA could not read document new storage area path after the storage was moved to another server

We migrate the whole GroupWise with document library to another server. The
server name and IP address are different from the old server. After the
migraiton, all email could be retrieve properly. However, the POA could not
find the storage area during the startup. All paths have been changed to
the new location. The old path message was showed on the NetWare server
screen once the POA is started.
So, I moved back the document library back to the original location and
changed the path in ConsoleOne. The "Path not found message was gone", but
I found the error message in the POA (Indexing only) - "Invalid path C06A".
When user retrieve the document and then save it, it also showed "Invalid
path c06A" and the document could not be returned to library. It still kept
on the temp folder. It occurred most of the document but not ALL.
How can I move the storage area to the new server without this error?
Thanks,
Terence

Dear Dave,
The NetWare version is 6.5.6. The Technote mentioned that I did try
already. The directory name didn't be changed, we just changed the server
and location.
Thanks,
Dave
"Dave Parkes" <[email protected]>
???????:[email protected]..
> These Netware servers ?
>
> Check TID 10019265, and watch the bit about keeping the directory names
> the same - you *must* do that
>
> Cheers Dave
>
>
> --
> Dave Parkes [NSCS]
> Occasionally resident at http://support-forums.novell.com/

Similar Messages

Error: Your request could not be completed because a failure occurred while the report was being processed.

Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.

The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM

HT1688 I upgraded my Iphone 4s with the new operating system. After the upgrade was performed all my contacts were lost. How do I recover my phone contacts?

I upgraded my Iphone 4s with the new operating system. After the upgrade was performed all my contacts were lost. How do I recover my phone contacts?

Synch them back from whatever contact manager or cloud service you stored them in.

When i put my iphone in sleep mode it open itself and a messege appeares for a fraction of a second i could not read it i restarted it and downloaded the last update nothing solved

Yesterday my iphone opened itself i hit the sleep button . After15 seconds it opened again ,a messege appeares for a fraction of a seconed i could not read it and i tried to shoot it but i couldn't .from yesterday this is the 3rd time that i recharge my iphone .

Hey saandyy,
Thanks for using Apple Support Communities.
You can try to restart the iPhone to exit recovery mode.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Have a nice day,
Mario

My cd rom drive is not showing up, my dvd is. but its not reading any new discs i put in the drive.

I was having problems and on the support page it said to uninstall the driver and then reinstall. the support page said that i would have to restart my PC and then the found new hardware would come up....That never happened. please tell me what i did wrong

Touchsmart PCs only have one drive, it would show as a DVD not a CD in device manager.

Adobe Application Manager. Error: Updates could not be applied. You are already running the Adobe...

Hi Guys
I am having a rather frustrating issue with my Photoshop CS6. I have been trying to run the updates for hours now as my Photoshop CS6 is slow and unresponsive. I have an i7 Mac and 16GB of RAM. it should not be slow.
Anyway.
I keep getting this error each time I try to run the updates.
I have:
Restarted
Repaired permissions
Reinstalled Adobe Applications Manager
Nothing works.
Pulling my hair out.

I have even tried manually downloading the update DMGs and doing it that way but the error persists.

Could not read boot block (input/output errror) powerbook g4

Hello
My friend gave me a powerbook g4 and a copy of osx lion, I would like to install it but the internal hardive is not available within the "select Destination" area of the installation process. I tried to repair the disk which is labelled Disk0s1, but shortly after it is underway i recieve this message.
**/dev/disk0s1 could not read boot block (input/output error) Error: The underlying task reported failure on exit. 1 non HFS volume checked, 1 volume could not be repaired because of an error.
Within disk utilities the Disk01s is grey, I can try to repair it but the above error occurs. Do you know what the problem is and how I can fix it?

Since you are going to install system fresh, it sounds like, you should erase the drive. Boot from the installer disc, then select the language but do not start the installer. From the menu bar, you should have either an Applications or an Installer menu. From one of the menus, you can then start Disk Utility.
From the drives and volumes pane, select the internal drive hardware listing.
This will now allow you to partition or erase the disc. Now click the Erase tab and select Mac OS Extended (Journaled) as the format and then click the "Erase" button. You can name the volume that will actually be created, like for instance "MacintoshHD" or whatever you want.)
Once the erase has completed, you need to check the information for the hard drive at the bottom of the window. Be sure that the partition scheme is Apple Partition Map. If for some reason it is something else, like GUID, you won't be able to install MacOS on it. You will need to click the Partition tab, click the "Options..." button and select Apple Partition Map, then click the "Partition" button.
Once this is done, then you can quit Disk Utility and you should be able to install Tiger on that HD.

I recently updated to the OSX 10.8.3 Operating Sistem. I am writing a book and now cannot open any word document I've created. Could not find a newer version of the Microsoft Word Processing Program. Is Pages the next thing? Can I recover my documents?

I recently updated to the OSX 10.8.3 Operating Sistem. I am writing a book and now cannot open any word document I've created with the old system. Could not find a newer version of the Microsoft Word Processing Program. Is Pages the next thing? Can I recover my documents? How?

I'm in the same boat: new to OS X and Mac, and in the middle of a book. I switched because I heard about the the ease of using Mac, but so far, for me, it's been a nightmare. I bought 2011 Office Mac and hate everything about it, the most recent being the inability to open or cut or paste any of my original word files. I understand that this could have easily been done with earlier versions, but not Mountain Lion (which I learned is what OSX is.) Since I work with language, I am amazed at the assumptions of the Apple community. It helps to use common language and explain even the basics.
So all the helpful hints to use the latest version of Office Mac are to no avail. Now what?

Could not make a new layer from the selection because the selected area is empty

I have Photoshop CS5 and I'm trying to do a selection on a new layer and when I copy it this message appears: "could not make a new layer from the selection because the selected area is empty"..
The new layer is selected, no other layer is selected. What the hell am I doing wrong???....Yes I'm a beginner.. ....please help?

Hi There,
So just to clarify you have made a new blank layer, made a selection on that layer and then done a Layer > New > Layer via Copy (or cmd J).
The reason that you would get this error message is you have made a selection on a blank layer (effectively selecting nothing) and tried to duplicate it and Photoshop won't let you do that.
When doing New Layer via Copy or New Layer via cut you selection needs to include some painted (coloured) pixels.
Regards
Paul
PS. Maybe you could explain what you are trying to achieve by copying the layer and I could help a little more.

Whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/macBuild/../view/umenu.MacOS.mm.line 1351

I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/MacBuild/../view/umenu.MacOS.mm.line 1351

I'd search or post here:
http://www.macosxaudio.com/forums/viewforum.php?f=26

Firefox could not open 300 new tab with content loading

Dear All,
Thanks for good support in web browser world.Directly i come to the question.I have excel sheet where it has 300 hyperlinks as given below(example links 3)My Excel macro is written in such a way that this will open all the link in firefox "new tab " one by one.It was perfect and page was loading in previous versions(i could not remember the exact version but i could say an year before when i used firefox it worked well).Now i am having issues opening 300 new tabs with links.It gets started loading the page but before one page loading gets completed too many new links are opening but the page is not fully loaded at all.When i click the tab for each link and see in the browser the green clour processing round sysmbol keeps on rotating.Can you please look into this issue.
If you want i can be contacted through email or if the information is not clear i am ready to connect through web sharing or to have a call.If you want spreadsheet for testing this issue i will send it.
Link Used in Excel sheet example : 300 links in same site with differrent page:
http://chartink.com/stocks/RECLTD.html
http://chartink.com/stocks/bpcl.html
http://chartink.com/stocks/itc.html
Expecting your positive reply at the earliest.Thank you!
Regards,
Marx
<sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

Hi Marx,
With this kind of data testing it is helpful to provide context to the issue you are trying to document. This technical information is very useful to the engineers working on the performance of Firefox and I am sure this is the kind of information they would love to see.
Therefore I would like to put you in touch with this team to see what they can do with this information. Talk to the #perf channel in irc and they should be able to put you in the right direction. I am asking currently and see what I can find. Or in the meantime check out the current tab bugs in the Performance component of bugzilla provided in the search below: [https://bugzilla.mozilla.org/buglist.cgi?quicksearch=tab%20performance&list_id=9361049]

Xformbuilder error ... Could not save document Name/Name-Schema.xml

Hello everyone,
We're using 7.00 SP14 and I have a problem with the xml forms builder on one of our systems. We're having a 3 system landscape - all three are on the same patch level etc.
I was able to create a new xml form on one machine, unfortunately it doesn't work on our P-system. I tried to create a new form as well as copied an existing one - with the same error result.
While saving a project the following errors appear:
The following error occured when saving the schema: Could not save document Name/Name-Schema.xml. Reason: Operation is not supported
The project could not be saved on the server. Do you want to save a local copy?
Oct 13, 2008 2:45:43 PM - (ERROR)com.sapportals.wcm.app.xfbuilder.server.ServerManager :Could not serialize document: Operation not supported
Does anyone know what the problem is? I'd appreciate your help, thanks.
Sincerely,
Susanne
Okay I just found out that it's not possible to create a new folder in KM under xmlforms. That's working on the other 2 systems quite well. I have all the admin roles but somehow somewhere somewho must have restricted that. We found out that ice, etc, runtim, entry points and maybe even a few more aren't setup to create new folders in there. Does anyone know where/how to change that? It doesn't work with Details - permissions etc.
Edited by: Susanne Zahn on Oct 13, 2008 3:40 PM

For anyone who's interested in the solution.. there you go.
14.10.2008 - 17:53:00 CET - Antwort von SAP
Dear customer,
Can you please check whether the repository /etc is in read-only
mode?
Please navigate to -
System Administration -> System Configuration -> Knowledge Management
-> Content Management -> Repository Managers -> File System Repository
There you can see the checkbox for "read-only".
Please insure that this is not ticked. If it is, please uncheck it
and building/saving the project again.

FATAL: Could not read from the boot medium! system halted.

hi
im running win7 64 bit on my pc , installed virtualbox 4.1.16
i have downloaded oracle vm server 3 ( v29653-01.iso ) , created new virtual machine and attached iso file but unable to boot from the iso
i am getting FATAL: Could not read from the boot medium! system halted.
under vm settings > storage > i have
IDE: controller
v29653-01.iso
atrributes: cd/dvd IDE primary master
live cd/dvd unchecked
under general tab i have > Operating system: linux version: oracle (64 bit )
Edited by: user9182826 on Aug 4, 2012 5:34 PM
Edited by: user9182826 on Aug 4, 2012 6:12 PM

Not sure if you are running into the same issue..
OVM 3.0.3 - New VM loses filesystem after OS install
For OEL5 VMs on 3.0.3 you have to add 'xen_emul_unplug=never' to your kernel boot line.

Could not parse XMBMessage due to Can't parse the document

*Dear all,*
*i have a SOAP to RFC Scenario. XML Validation by Adapter is turned on in SenderAgreement.*
*XSD Files are placed in the correct directory. Incoming requests are validated. However,*
*it seems that responses produce an error in the soap adapter.*
*This is the error message i am getting:*
+SOAP:Fault>+
         +<faultcode>SOAP:Server</faultcode>+
         +<faultstring>Server Error</faultstring>+
         +<detail>+
            +<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">+
               +<context>XIAdapter</context>+
               +<code>ADAPTER.JAVA_EXCEPTION</code>+
               +<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage due to Can't parse the document+
+     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1173)+
+     at sun.reflect.GeneratedMethodAccessor678.invoke(Unknown Source)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:592)....+
*In SXMB_MONI my response includes the following passages*
+- 
+<Trace level="3" type="T">Pipeline Service = PLSRV_XML_VALIDATION_RS_OUT</Trace>+
+<Trace level="3" type="T">Skip Inbound Validation =</Trace>+
+<Trace level="3" type="T">Skip Outbound Validation =</Trace>+
+<Trace level="3" type="T">Area = XML_VALIDATION_OUT</Trace>+
+<Trace level="1" type="T">Reading sender agreement</Trace>+
+<Trace level="3" type="T">Validation Mode = Validation by Adapter</Trace>+
+<Trace level="1" type="T">Outbound validation of response takes place</Trace>+
+<Trace level="3" type="T">Interface Name = SI_xxx_xxx_xxx_Sync_Outbound</Trace>+
+<Trace level="3" type="T">Interface Namespace = http://xxx.de/xxx</Trace>+
+<Trace level="3" type="T">Software Component Version = D390B9E10A6B11DF8C15C7540A484C06</Trace>+
+<Trace level="2" type="T">Java Validation Service Call</Trace>+
+<Trace level="1" type="T">System error occurred during XML validation</Trace>+
+<Trace level="1" type="E">CL_XMS_PLSRV_VALIDATION~ENTER_PLSRV</Trace>+
+</Trace>+
+<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />+
+- 
+<Trace level="3" type="T">Persisting message Status = 023</Trace>+
+<Trace level="3" type="T">Message version 009</Trace>+
+<Trace level="3" type="T">Pipeline CENTRAL</Trace>+
+</SAP:Trace>+
*I see the following error message:*
+<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>+
+- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XML_VALIDATION_OUT">CX_XMS_SYSERR_VALIDATION</SAP:Code>
<SAP:P1>Schema xxx.response.xsd not found in J:\usr\sap\xxx\SYS\global\xi\runtime_server\validation\schema\00000000000000000000000000000000\ u00D3u00B9u00E1 k u00DF u00C7T HL \SI_xxx_xxx_xxx_Sync_Outbound\urnsap-comdocumentsaprfc~functions\xxx.response.xsd (J:\usr\sap\xxx\SYS\global\xi\runtime_server\validation\schema)</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>not used at the moment.</SAP:AdditionalText>
<SAP:Stack>System error occurred during XML validation</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
There seems to be an error in the adapter trying to validate the response. Does anyone has a clue as to why ?

Since i cannot get i running, i helped myself using a java mapping, that i packaged into a jar
along with the xsd files. See code below:
import com.sap.aii.*;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.BufferedReader;
import java.io.OutputStream;
import java.io.OutputStreamWriter;
import java.io.UnsupportedEncodingException;
import java.io.InputStreamReader;
import java.io.Reader;
import javax.xml.transform.sax.SAXResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.stream.StreamSource;
import javax.xml.validation.Schema;
import javax.xml.validation.SchemaFactory;
import javax.xml.validation.Validator;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
@SuppressWarnings("unused")
public class CustomValidator extends AbstractTransformation {
     public void transform(TransformationInput arg0, TransformationOutput arg1)
               throws StreamTransformationException {
          Validator validator;
          InputStreamReader insr;
          String inputPayloadString;
          try {
               // Trace
               getTrace().addInfo("com.xxx.pi.mapping.validation.CustomValidator called");
               InputStream inputPayloadStream = arg0.getInputPayload()
                         .getInputStream();
               insr = new InputStreamReader(inputPayloadStream);
               InputHeader inpHeader = arg0.getInputHeader();
               String intfName = inpHeader.getInterface();
               getTrace().addInfo("Interface Name is :" + intfName);
               String xsdName = "";
               if (intfName
                         .equalsIgnoreCase("SI_xxx_Sync_Outbound")) {
                    xsdName = "Z_xxx.xsd";
               if (intfName.equalsIgnoreCase("SI_xxx")) {
                    xsdName = "Z_xxx.xsd";
               if (intfName
                         .equalsIgnoreCase("SI_xxx_Sync_Outbound")) {
                    xsdName = "Z_xxx.xsd";
               if (intfName
                         .equalsIgnoreCase("SI_xxxx_Sync_Outbound")) {
                    xsdName = "Z_xxx.xsd";
               getTrace().addInfo("Using schema: " + xsdName);
               if (xsdName.equals(""))
                    throw new StreamTransformationException("Schema für "
                              + intfName + " nicht gefunden.");
               BufferedReader reader = new BufferedReader(new InputStreamReader(
                         getClass().getResourceAsStream(
                                   "/com/xxx/pi/mapping/xsd/" + xsdName)));
               // prepare document validator:
               String schemaLang = "http://www.w3.org/2001/XMLSchema";
               SchemaFactory jaxp = SchemaFactory.newInstance(schemaLang);
               Schema schema = jaxp.newSchema(new StreamSource(reader));
               validator = schema.newValidator();
          } catch (SAXException saxe) {
               throw new StreamTransformationException(saxe.getMessage());
          // validate
          try {
               SAXSource source = new SAXSource(new InputSource(insr));
               validator.validate(source);
          } catch (Exception e) {
               getTrace().addInfo(e.getMessage());
               String trace = e.getMessage();
               throw new StreamTransformationException(trace, e.getCause());
          // Write the response
          try {
               inputPayloadString = convertStreamToString(arg0.getInputPayload()
                         .getInputStream());
               arg1.getOutputPayload().getOutputStream()
                         .write(inputPayloadString.getBytes("UTF-8"));
               getTrace().addInfo("Schema Validierung erfolgreich !");
          } catch (Exception e) {
               throw new StreamTransformationException(e.getMessage());
     // helper to convert to String
     private static String convertStreamToString(InputStream in) {
          StringBuffer sb = new StringBuffer();
          try {
               InputStreamReader isr = new InputStreamReader(in);
               BufferedReader reader = new BufferedReader(isr);
               String line;
               while ((line = reader.readLine()) != null) {
                    sb.append(line);
          catch (Exception exception) {
          return sb.toString();

POA could not read document new storage area path after the storage was moved to another server

Similar Messages

Maybe you are looking for