POA HTTP Monitor not loading after upgrade

I'm working on a migration/upgrade from gw8 to gw2014, all of the agents show started in the admin console but the http monitor screen will not load. I initially had a bad path to a certificate and have removed the certificate and it's path, turned off ssl and restarted the POA.
I'm still getting this though, when I try to access the POA (non ssl)
GroupWise 2014 POA - PONAME
Status | Configuration | Environment | Log Files | Scheduled Events | MTP Status | Help
Web Console Access has been disabled due to error in loading SSL Certificate: [8209]
Any assistance is appreciated.
Dan

Hi Laura,
Yes I have checked the poa startup file and it looks fine. It was a fresh install of GW2014 so there is only one poa file and it's located in the post office directory as well. Interestingly, it's the monitor screen of the domain that shows this wrong information when I click on 'Links' and then the PO link listed there. When I look at monitor in the PO, any of the path data in there shows correct. So it makes me believe the problem is on info stored in the domain - but maybe I'm wrong. Also, mail goes out just fine, but it fails coming in because the domain drops it in the old location and the post office tries to pick it up in the new location.
Originally Posted by laurabuckley
Hi Dan,
Just a quick suggestion... Have you checked your POA startup file to see if it has the wrong path set in there? Look at the top of the file for the "home" path.
Let us know how it goes.
Cheers,

Similar Messages

Facebook images do not load after upgrading to 6.0. What to do?

After upgrading to Firefox 6.0 my Facebook images will not open. I see a white box with a frame but after clicking on it a totally black square opens up instead a photo. All is OK when using IE9. (Also, the same with Twitpics on Twitter.)

If images are missing then check that you aren't blocking images from some domains.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
* Check that images are enabled: Tools > Options > Content: [X] Load images automatically
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

[SOLVED] Modules not loaded after upgrade linux (3.9.5-1 - 3.11.6)

Hi. After upgrading the package linux from 3.9.5-1 to 3.11.6,
many modules such as wifi or psmouse are not loaded.
My PC is Asus Zenbook UX31E.
If I do by hand like
# modprobe ath9k
# modprobe psmouse
wifi and psmouse are OK,
but I want to set all necessary modules auto loaded.
* Output of lsmod of linux 3.9.5-1 was 87 rows
but lsmod of 3.11.6 (I attache below) is only 39 rows.
* Both
/etc/modprobe.d/
/etc/modules-load.d/
are empty on 3.9.5-1 and 3.11.6.
Please give me advice, thx.
Last edited by taro (2014-01-08 11:20:46)

Thx. The version numbers seem to be identical.
% uname -a [~]
Linux tenryu 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64 GNU/Linux
% pacman -Qi linux [~]
Name : linux
Version : 3.11.6-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.11.6
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 64493.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sat 19 Oct 2013 06:25:12 AM JST
Install Date : Fri 08 Nov 2013 12:06:17 PM JST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : None
best regards.

External monitor not recognized after upgrading to win 10

After upgrading to Windows 10, my external Samsung monitor isn't recognized. Not sure if I need new drivers from HP or Samsung (they say they don't have anything for me, of course).

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

[solved] TV card not loaded after upgrade to kmod

After the upgrade to mkinitcpio and kmod replacing module-init-tools, my TV card (Hauppauge WinTV Nova-S) is not loaded.
Downgrading mkinitcpio and re-installing module-init-tools and regenerating my initramfs and all is well.
Is there any extra setup needed with kmod? There are no man files in the kmod package so I'm at a loss what to do.
Incase it helps, here are (maybe not all) the modules related to my tv card when downgraded:
-->lsmod | grep dvb
cx88_dvb 23415 39
cx88_vp3054_i2c 1932 1 cx88_dvb
videobuf_dvb 4794 1 cx88_dvb
dvb_core 92868 2 cx88_dvb,videobuf_dvb
cx8802 13121 1 cx88_dvb
cx88xx 73365 4 cx88_dvb,cx88_alsa,cx8800,cx8802
videobuf_dma_sg 7936 5 cx88_dvb,cx88_alsa,cx8800,cx8802,cx88xx
videobuf_core 15879 5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg
i2c_core 20492 15 isl6421,cx24123,wm8775,cx88_dvb,cx88_vp3054_i2c,cx8800,cx88xx,tveeprom,v4l2_common,videodev,i2c_piix4,nouveau,drm_kms_helper,drm,i2c_algo_bit
Last edited by fastfret79 (2012-01-10 22:29:35)

Yes - initramfs regenerated after each upgrade and downgrade.
Forgot to mention I was also suffering from the 'Filename too long' FS#27862 and your updated kmod in that bug's comments fixed that. I'm guessing that my issue is unrelated.
With both kmod packages, initramfs complains that /etc/modprobe.d/modprobe.conf doesn't exist, but I've never added anything in there anyway and the kmod package doesn't contain that file.
Last edited by fastfret79 (2012-01-10 11:53:07)

Spiceworks Network Monitor not working after upgrading to version 1.2

It's the same with my upgrade. Look like we need some oil and vinegar for the pepper ;)

Hello,
I received the email informing the availability of the new release of Network Monitor. After upgrading, the web console locks at below step:
The above issue persists whatever restarting the services or rebooting the computer hosting this service.
I also noticed that the size of this release is 682KB which is obviously small compare to old version:
Anyone else experiences the same issue?
Thanks
This topic first appeared in the Spiceworks Community

Itunes library not loading after upgrading

Please help: I had to upgrade my itunes when I plugged in my Iphone and now it won't sync. No matter what I plug in (Ipad, Ipad2, Iphone or Ipod) the only thing that happens is the Iphotos will pop up and recognize that I have plugged in my device, but the Itunes does not load and sync. I don't know if I did something wrong, put when it asked if I wanted to use Icloud I clicked no. I don't know if that is my problem now or what. If anyone can help, I would appreciate it, as I am lost!
Thanks, Debbie.

johnc86,
Are you following the instructions from this article in the Apple Knowledge Base, in particular the renaming of the .itl file from the Previous Libraries folder?

External Monitor Not Working After Upgrade

Hello friends.
I upgraded computer and software (Production Premium CS5.5). I use an external deck that is connected through Firewire. Premiere Pro sees the deck but does not output the image/video to it. I even managed to capture from the deck into Premiere without a problem. No matter what I've tried Premiere won't export to the NTSC monitor. It did in Production Studio Premium. With the Premiere software I had before it would export any SD NTSC image or video. I produce a weekly television show and my external NTSC monitor is a must for color calibration. Any help would be greatly appreciated.
CS5.5 Production Premium
Dual DVI monitors
Quadro 2000 video card
Windows pro 7 - 64bit
i7 with 16 gigs ram

>reply below
If you are talking about a different message, saying see "below" or "above" will have zero meaning just as soon as someone posts another message
Post the link to the message... this message is http://forums.adobe.com/thread/960405

3 DVI monitor not working after upgrade

I have three monitors connected to my new Mac pro via Active Minidisplay port to DVI adapters. They are all Dell 24" (1 2407,and 2 2405) they worked fine on 10.9.2 but after the upgrade to 10.9.3 only two monitors will work now. Verfiied that I was following Apple's document on connecting the three monitors. If I Disconnect one of the two working monitor the previous blank one would automatically go active.

This issue is caused by a bug in OS X 10.9.3. The following steps have been reported to resolve it in some cases (not all.) If none of them works for you, the only other option is to revert to 10.9.2, which can be done by restoring a pre-update backup. You may prefer to wait for Apple to release another update, but I don't know when that will happen.
1. Reset the System Management Controller.
2. Reset the PRAM.
3. Install the Combo updater.

App Store will not load after upgrading to mac osx 10.7.2

Upgraded my MacBook Pro to 10.7.2 and now App Store will not present any information... seems to hang trying to connect to the store. This is just one symptom of issues after the upgrade... Outlook, Safari, KeyChain Access, etc all failing to load or to operate properly.

Install the OS X Lion Update 10.7.2 Client Combo
Then restart your Mac.
If you still have problems, you may need to repair the startup disk.
Use Lion Recovery to do that.

Images in Amazon not loading after upgrade to 10.7.5

Hi, I am running 10.7.5 on a Macbook Intel Core 2 Duo (2007) - Images now do not appear to load in any browser (Safari, Chrome or Firefox) on Amazon. Images will however load on eBay for instance. Problem is recent and may be related to the 10.7.5 security upgrade installed last week. Anybody else seeing this issue or know of a solution? Thanks!

Restart your internet modem and wi-fi router if you use one then see if a browser will load images.

ITunes does not load after upgrading to 7.4.2!

Installed iTunes 7.4.2 just right now. When I try to start it, all it will do is quickly flash "iTunes" in the menu bar without starting; sometimes not even that will occur. I opened the Activity Monitor to watch the app; iTunes does appear to start when I double-click by showing up in the monitor; however, after a few seconds it disappears.
Anybody know what's going on?

Do you have QuickTime 7.2 installed from the Apple website?
Make sure to remove any "hackies", betas, and ShapeShifter, if installed.
Go to /Library/Receipts/drag iTunesX.pkg to the trash and empty.
Repair permissions ..... RESTART
Reinstall iTunes 7.4.2 (Mac) from the Apple website +without performing any other processes during the download or install!+
Repair Permissions
DIXIE

ITunes will not load after upgrade - says files missing

i got a prompt that my iTouch had new software for download. I went to download it and was prompted to download the latest version of iTunes first. I did this and now I can not access my iTunes. I get a prompt that iTunes cannot run because some of its required files are missing.
I am not sure what itunes version I had prevously but it was the latest version until I tried to upgrade. my itouch is version 4.1 (8b117). the itouch unit is a 2nd generaton. i am using windows 7 with IE 8.
Please help. what should i do now? I cant get into my iTunes to sync my iTouch
Thanks
Tim

I found out the issue with itunes. I had been using a converter program to convert movies for the itouch and the one I used also required a quicktime codec that must have interfered with itunes...I uninstalled the program...and itunes is back and running great. sorry to have rushed to judgement. Newfietom

Apps not loading after upgrade to lion

I upgraded to Lion and had no problems but now some programs won't load. They just bounce a couple of times on the dock and then go away. No error comes up or anything.

i tried re syncing... but still have a problem... what sync set-up should i use?

Aperture not loading after upgrade to 10.5.8

Have just upgraded to 10.5.8 on my MacBook Pro and when I go to start Aperture, it just says the application has quit unexpectedly. What gives? Everything was humming along with the previous OS that I had.
I did the same installation on my iMac a few months back and had no issues.
Help please!
C

Hi Frank,
Thanks for getting back to me. So the stroy so far. I have upgraded/installed Snow Leopard OS and then upgraded to Aperture 3 from 1.5.
Aperture is now asking me for the licensing serial number, I have both the original and the A3 upgrade. I punched in the upgrade serial unmber and it did not like that and asked for the original. I punched that in (straight off the Apple packaging that says 'Product Serial Number') and it has now come up with an alert saying " The serial number you entered is no valid" - What's going on?
This stuff reminds me of my days with Windows!!!!
If you can help I'd be grateful.
C

POA HTTP Monitor not loading after upgrade

Similar Messages

Maybe you are looking for