POA Losing Connection with Remote File Storage for Libraries

(Netware 6.5 SP8)(Groupwise 8.0.2 HP2)
Shortly after we installed Service Pack 2 users started reporting blank documents opening from the libraries. Couldn't see any errors occurring on logs or any server issues.
Running 4 separate libraries, largest has around 100,000 active documents.
Problem was fixed by restarting POA. Happens randomly everyday or every second day.
Have made no system changes or setting changes that might affect it. Have just applied HP2 hoping this would fix the issue, but to no avail.
Is anyone experiencing anything similar, any help appreciated.

Check if the indexing is running well. Check the nightly logs.
Gert
On 2/21/2011 3:06 AM, blofts wrote:
>
> (Netware 6.5 SP8)(Groupwise 8.0.2 HP2)
>
> Shortly after we installed Service Pack 2 users started reporting blank
> documents opening from the libraries. Couldn't see any errors occurring
> on logs or any server issues.
>
> Running 4 separate libraries, largest has around 100,000 active
> documents.
>
> Problem was fixed by restarting POA. Happens randomly everyday or every
> second day.
>
> Have made no system changes or setting changes that might affect it.
> Have just applied HP2 hoping this would fix the issue, but to no avail.
>
> Is anyone experiencing anything similar, any help appreciated.
>
>

Similar Messages

Acouple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since with Apple

A couple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since,with Apple & Apple store support & many hours of contact with them the problem keeps recurring

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Error while making connection with remote oracle database

Dear,
I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
DriverManager.getConnection(
"jdbc:oracle:thin:@erp:1521:ORCL", "apps",
"apps");
Pls any body have idea.
Thanks.

Thanks for support.
Below is error which i am getting while making connection with remote database.
C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
-------- Oracle JDBC Connection Testing ------
Where is your Oracle JDBC Driver?
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
        at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:186)
        at OracleJDBC.main(OracleJDBC.java:13)
Advice.

Aperture Losing Connection With Masters

Hi,
I've been using iPhoto since the beginning and started noticing over the past year it would lose connections with the master files. Thankfully I had backups of each file. So I decided to start rebuilding my library in Aperture from scratch (figured start clean and all). I started importing files and adding metadata and keywords. I didn't get far (literally a day or two) before I realized that Aperture started losing conncetions with the Master files as well.
How I found out is that I used a software called HoudahGeo to geotag some old photos and it gave me the warning that it couldn't find the master files. When I went back to Aperture I clicked on the image and noticed that the "Show in Finder" option was grayed out. I went into the Aperture library itself (because I was having it keep on the images inside the library and not referenced) and noticed that the files were there in the "Masters" folder but Aperture was saying it was missing. When I tried to relocate the original it fixed the one image but then started to break connections with other files and images. I notice it had randomly last connection with different files in different albums.
At this point I'm not sure what to do since I've had this problem with both iPhoto and Aperture. Thankfully I didn't get far before I realized this problem but I was really hoping to use Aperture for all my photos but it makes me worried that it'll lose images like that. I don't want images to get deleted or lost.
Has anyone had this problem or know how to fix it? I sent feedback to Apple so hoping it's a bug they can fix. I'm currently using Mavericks and Aperture 3.5.1.
Thanks!

How I found out is that I used a software called HoudahGeo to geotag some old photos and it gave me the warning that it couldn't find the master files. When I went back to Aperture I clicked on the image and noticed that the "Show in Finder" option was grayed out.
I thought your Aperture library is managed? iPhoto will show the originals for managed images, but not Aperture. "Show in Finder" will be grayed out, if the images is in the Aperture Library package. That does not indicate that Aperture has lost the connection. Broken arrow badges indicate lost originals.
But the problem wasn't HoudahGeo accessing my masters but notifying me that Aperture lost them. Because when I went back to into Aperture I noticed the original files were missing.
What exacty did you see in Aperture, that the orignals are missing? Badges with broken arrows?
I went into the Aperture library itself (because I was having it keep on the images inside the library and not referenced) and noticed that the files were there in the "Masters" folder but Aperture was saying it was missing. When I tried to relocate the original it fixed the one image but then started to break connections with other files and images.
This cannot be - are you saying, Aperture did relocate an original file, that it reported as missing?
The forum software seems to be working again today, so we could start again to try to get to the roots of your puzzling problem.
Or have you solved it by now? Then let us know please.

Canon 7D Mark II fails to connect with LR 5.7 for tethered shoot.

Canon 7D2 fails to connect with LR 5.7 for tethered shoot.
The camera connection does work with Canon EOS Utility.
LR sees the camera but fails to establish and maintain connection. See small video clip to view the camera and computer behaviour while attempting to connect.
https://dl.dropboxusercontent.com/u/28457054/7D2%20tethered%20test.m4v
I also have the Canon 5D3 and have no issues connecting with various software (EOS Utility, LR, Helicon Remote) on that computer. I have a MacBookPro mid-2009 running OS X 10.8.5. Lightroom, Camera Raw and EOS Utility are up to date, same goes for the 7D2 firmware.

It usually takes many months and perhaps more than one version of LR before tethering is supported after raws are supported. The first hurdle is for the camera manufacturer to release a new SDK with the camera supported, so Adobe can’t have tethering ready when raw support is because a camera isn’t added until after it is announced. Canon has added the 7D.2 to their SDK about two weeks after the camera was available, so the ball is in Adobe’s court:
http://www.usa.canon.com/cusa/consumer/standard_display/sdk_homepage

Ipad3 vs wifi? Everytime i lock the screen i am losing connection with my wifi

Ipad3 vs wifi? Everytime i lock the screen i am losing connection with my wifi. It has not happened before

Try restarting or rebooting your iPad. See if that helps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

In Aperture 3.4.1, I am not able to connect with referenced files on a network

I am running OS X 10.8.2 and Aperture 3.4.1, and am unable to connect with referenced files on a network. Specifically, the referenced files reside on my iMac and I am attempting to connect to them from my MBP. They appear in red in the dialogue box. While I know this has been a long standing issue in other versions, I was hoping it had been solved by now. Any assistance will be appreciated.
Thanks -
Dudley

http://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards.

Using a partitionned cache with off-heap storage for backup data

Hi,
Is it possible to define a partitionned cache (with data into the heap) with off-heap storage for backup data ?
I think it could be worthwhile to do so, as backup data are associated with a different access pattern.
If so, what are the impacts of such off-heap storage for backup data ?
Particularly, what are the impacts on performance ?
Thanks.
Regards,
Dominique

Hi,
It seems what using scheme for backup-store is broken in latest version of Coherence, I've got an exception using your setup.
2010-07-24 12:21:16.562/7.969 Oracle Coherence GE 3.6.0.0 <Error> (thread=DistributedCache, member=1): java.lang.NullPointerException
     at com.tangosol.net.DefaultConfigurableCacheFactory.findSchemeMapping(DefaultConfigurableCacheFactory.java:466)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage$BackingManager.isPartitioned(PartitionedCache.java:10)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage.instantiateBackupMap(PartitionedCache.java:24)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage.setCacheName(PartitionedCache.java:29)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ServiceConfig$ConfigListener.entryInserted(PartitionedCache.java:17)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:266)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:226)
     at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
     at com.tangosol.util.ObservableHashMap.dispatchEvent(ObservableHashMap.java:229)
     at com.tangosol.util.ObservableHashMap$Entry.onAdd(ObservableHashMap.java:270)
     at com.tangosol.util.SafeHashMap.put(SafeHashMap.java:244)
     at com.tangosol.coherence.component.util.ServiceConfig$Map.put(ServiceConfig.java:43)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$StorageIdRequest.onReceived(PartitionedCache.java:45)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.java:11)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.java:33)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService.onNotify(PartitionedService.java:3)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache.onNotify(PartitionedCache.java:3)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.java:42)
     at java.lang.Thread.run(Thread.java:619)Tracing in debuger has shown what problem is in PartitionedCache$Storage#setCacheName(String) method, it calls instantiateBackingMap(String) before setting __m_CacheName field.
It is broken in 3.6.0b17229
PS using asynchronous wrapper around disk based backup storage should reduce performance impact

I keep losing connection with my printer

I keep losing connection with my printer.

Can you provide more details?
- What kind of time capsule you are using?
- What kind of printer?
- How is the printer connected (Wifi, LAN, USB...)?

I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen. The 5th Gen keeps on losing connection with the main router. Any ideas why?

I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen.
The 5th Gen keeps on losing connection with the main router and thus with the internet.
Any ideas why?

Is the second Extreme configured to "extend" the network created by the first? If so its position must be such that it has a strong wireless connection to the first Extreme. If it is at the limits of the first one's wireless range its connection will be tenuous. Place them closer together and determine if that makes a difference.

Connecting to a File Storage

Hello,
We will be using the File Storage as a storage, what are the ways to connect to it from UCM (we already have the 11G instance installed and configured).
Someone mentioned that:
'This can be configured later and I believe is by default. Just make sure you do not enable the FileStore Component in UCM'
What is the proper way to point to the File Storage (without using FileStore Component), for example if we have "directoryname"/ucmdocs?
Thanks!

Hi
With File Store Provider you have the following 2 options :
1. File system based storage .
2. DB based storage .
For 1 you will need to create a partition on UCM Administration - File Store Administration where in the location of the content storage will be defined . This can be a location outside the UCM default ones or shared location on SAN , NAS etc .
DB Storage means that the contents as whole will be stored in DB and all the queries will be run for retrieving the contents on the db side when searching from UCM.
So when these configurations are completed UCM knows where to look for the contents when user is searching for .
Thanks
Srinath

Apple TV losing connection with iTunes on Windows

I am running iTunes on both an HP MediaSmart Windows Home Server (WHS) and a newly installed Windows Vista system. I have multiple Apple TV's around the house - both ATV2's and ATV3's.
I was using the MediaSmart Server as my main iTunes server for Apple TV streaming. That was the system's only function. Unfortunately, I was constantly restarting iTunes and/or the system as my Apple TV's would lose connection to home sharing. I thought WHS was the problem so I set up an unused computer to install Windows Vista (only license I had laying around) and installed iTunes. Everything seemed to work fine for a few days then I started losing connection to that iTunes also. I turned off the WHS system thinking it was causing the other iTunes to choke. That did not help.
For reference, All of my computers are hard wired and I have some ATV's that are hard wired and some that are using wireless. Wired or wireless....the problem still exists. Also, I have competely disabled anti-virus and the firewall on both iTunes servers.
I can watch multiple movies at one sitting. However, if iTunes is idle overnight (or even for a few hours it seems), my Apple TV's can not re-connect to home sharing and I need to restart iTunes.
Last night I disabled the AppleMobileDeviceHelper and the iPodService services hoping that would help. I have not had a chance to fully test this out yet, but did stumble across quite a few posts where MANY others are having tjhis same issue. Many are saying it has to do with the ATV3's sleep mode. If I recall correctly, my major problems did seem to start about the time I got my first ATV3. When I get home tonight I will disable the sleep mode on all of my ATV's.
Here is the question...just in case that works: Is powering off the device by holding down the play button the same as allowing the device to "sleep"? I ask because I use Harmony remotes and I have programmed them to power off the Apple TV when turning off all devices.
As I said, I have multiple ATV's (7 to be exact - 3 ATV3's and 4 ATV2's) and would hate to leave them all on all the time just to fix this problem.
Any feedback would be appreciated. It is difficult to discern a solid solution from the 400,000 other posts on this topic.
Thanks.

Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
Here is a link to the other thread I was referring to above:
https://discussions.apple.com/message/19952545#19952545
Have you applied the latest firmware updates to your ATV 3's?

Losing connection to Network Attached Storage device

This is incredibly frustrating...
I have a Buffalo Linkstation NAS hooked into my Airport Extreme basestation, so I can use it for backups for my desktop and my wife's laptop. The volume mounts fine and I am able to copy files to and from without any problems, except for the known issues with long file names and backups over 2 Gigs.
However, I haven't been able to perform a complete backup of my user directory due to losing the connection to the volume.
It seems to happen at random times during the backup process. It doesn't seem to matter if I connect to the NAS drive via AFP or SMB. I've tried many different backup programs, including SuperDuper, Retrospect, and Apple's Backup, and all experience the same issue.
I have no other devices connected via Firewire, and no lower-level software running like virus scans. Despite trying many times, I have yet to make it through a full backup. And I have never seen the connection to the volume dropped when the volume is inactive, only when files are actively being copied.
Any help would be incredibly appreciated.

Interesting thought, yes I do. I had considered that, although the problem would occur at any time, even if I tried a backup during the night when the phone never rang.
Regardless, the problem seems to be solved. The Buffalo Linkstation setup includes a setting for (I believe) Ethernet packet size, or something along those lines. Increasing the size has apparently fixed the problem. Backups seem to be working fine with Apple's Backup 3 or SuperDuper.
Thanks for the thought!

"No connectivity with the server" error for one document but not the other, in the same document library

We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?

It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

CCM 2.0 - Files Storage for high volume of files

Hi all,
I have seen in one message the following information:
<i>1. Files storage.
My point is that I think you've created a virtual folder on the SRM Server in SICF, which means that all your files are stored internally in the database, and not physically on the server.
The most simple way is to create a physical folder on the server OS, and then create analias in SICF to this folder. You then will be abble to load in mass the pictures on the server using FTP, or network Share.</i>
I want to upload images in the Catalog (CCM 2.0) and in my case I have high volume of files. Where is the best place to stored this data, in the database or in the server?
And if it is in the server, how I can create an alias?
Many thanks!!
Regards

Hi ,
What we had done for image upload for CCM 2.0 was like this:
1. in SE80 go to MIME repository -> drill down to services -> bc /sap/bsp - >Create a personal folder
2. Import your image .jpeg in this folder.
3. Derive an URL with the structue : server name/domain name/services/file name
4. test this URL in IE browser ,it should open the picture in IE for you.
5. then paste this URL in the characteristic 'image' of an item in master catalog in CAT
with this in EBP we could see the photos of the items.
BR
Dinesh
reward if helps

POA Losing Connection with Remote File Storage for Libraries

Similar Messages

Maybe you are looking for