POA Status screen in Monitor

GW8 patched--On the POA status screen in Monitor, can anyone tell me what
"Unsuccessful Document Conversion" refers to in the Statistics section?
There is a count of 111 in there right now on our stats... (almost 15000
for Successful Documents Conversion). I assume it has something to do with
the DMS docs of which we have thousands, but what conversions are
unsuccessful -- what would I look for in the logs or what user complaints
would result? I am getting random odd user complaints lately. Thanks in
advance.

Thanks Massimo--after posting I saw some documentation about pdf docs and
conversion--guess those 111 attachments would not show up in search results
then either.
"Massimo Rosen" wrote in message
news:g44Ur.2822$[email protected]..
On 07.08.2012 00:36, PatM wrote:
> GW8 patched--On the POA status screen in Monitor, can anyone tell me
> what "Unsuccessful Document Conversion" refers to in the Statistics
> section? There is a count of 111 in there right now on our stats...
> (almost 15000 for Successful Documents Conversion). I assume it has
> something to do with the DMS docs of which we have thousands, but what
> conversions are unsuccessful -- what would I look for in the logs or
> what user complaints would result? I am getting random odd user
> complaints lately. Thanks in advance.
This has nothing to do with DMS. Unsuccesful conversions occur when the
indexer attempts to index attachments to mails, but fails to. Nothing to
worry about.
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de

Similar Messages

  • Exactly what cables and hardware do I need to connect my early-2008 MacBook Pro to a flat-screen TV monitor to have both video and audio?

    Hello--
    I'm trying to figure out how to connect my 15" MacPro Book from early 2008 to a Sony flat screen TV monitor. I've been told I need a "Mini DisplayPort to HDMI Adapter" and a "HDMI to HDMI" cable, but I've also been reading that some cables only work with 2010 & 2011 laptops and that I may need additional cable/hardware to obtain audio. Could someone advise me on exactly what products I need to purchase?
    Thank you!

    Which MacBook Pro 15" do you have?
    With the silver keyboard (Early 2008)) or that one with a black keyboard (Late 2008)?
    If you habe the Late 2008 you can use a miniDisplay Port + Audio to HDMI like that one (stereo sound) or that one (5.1).
    If you have the Early 2008, it's not so easy, because you need a DVI + Audio to HDMI like that one (the Audio Channels had to be converted to Coaxial!) So much more adapters! Maybe there is a manufaturer which has the all in one solution)
    Both MacBook Pro DOESN'T support audio on the video output! The later ones (Mid 2010 and later) supports Audio output within the miniDisplay Port.

  • I just bought a recertified Mac Mini, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.

    I just bought a recertified Mac Mini core duo - it's not the newer model-, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it  and using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.
    The company I bought it from is not Apple, and I may regret that. It was in my price range, though.
    This is the first time I've used this community, and I've been a Mac owner since 2000. Thanks in advance!

    when you say "Mac flat screen LCD", do you mean this:
    http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
    if it is, you might wanna try this:
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

  • Stuck in To Be Delivered Status in Message Monitoring - Adapter Engine

    Hi,
    I have messages stuck in To Be Delivered status in Messages Monitoring. When i checked the Audito Logs, there are NO LOGS. I resent the message and now the logs indicated in the Audit Logs is:
    2014-03-26 08:39:10
    Information
    The message was successfully received by the messaging system. Protocol: XI URL: http://<host>:<port>/MessagingSystem/receive/AFW/XI Credential (User): PIIXXXX
    2014-03-26 08:39:10
    Information
    Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
    2014-03-26 08:39:10
    Information
    Message successfully put into the queue.
    2014-03-26 08:52:48
    Information
    Admin action: Trying to redeliver message.
    The connection between the receiver is ok, does this have something to do with the Communication Channels?
    Please help.
    thank you.

    Hi Eng Swee,
    there are messages that were cancelled yesterday and the status is 'Terminated With Errors'
    this is what is indicated in the Audit Logs
    2014-03-26 02:38:47
    Information
    Admin action: Trying to fail message.
    2014-03-26 02:38:47
    Error
    The message status was set to FAIL.
    2014-03-26 02:38:47
    Information
    Admin action: The message was successfully set to status failed.
    2014-03-26 02:38:47
    Error
    Asynchronous error detected: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Message failed by admin.. Trying to report it.
    2014-03-26 02:38:47
    Error
    Asynchronous error reported.
    Is this the reason why the messages are stuck?
    thank you!

  • To Be delivered status in Message monitoring

    Hi,
    There are some messages in TO BE DELIVERED status in Message monitoring while selecting integration server. I could neither cancel nor resend.
    any input reg. this will be appreciated.
    I didn't see any messages with TO BE delivered status in adapater engine.
    I could able to clear What ever messages in system error status in adapter engine by filtering based on sequential id.
    I have seen this thread  & link also.
    To Be Delivered
    Re: "To be delivered" status in RWB -- Any solution?
    http://help.sap.com/saphelp_nw04/helpdata/EN/49/e3fb40ef74f823e10000000a155106/content.htm
    I could not see any entry in SMQ1, SMQ2, SM58 also
    Thanks
    Praba
    Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:02 PM
    Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:04 PM

    Hi,
    You cannot resend or cancell the messages which are in status "To Be Delivered". Check Receiver adapter File/Jdbc/ OFTP e.t.c. which is processing these messages.
    Check with your Basis team to remove the lock of adapters if any. Or to process these messages you require soft restart of Java stack.
    I had same kind of issue two days back with OFTP adapter messages and did soft restart of java stack with help of Basis team.
    Hope it will helps you
    Cheers
    Veera

  • Change the input parameter in Check Status screen

    Hi,
    I have a requirment to change the input parameter option in the check status screen. Currently when we search the SC using the date and staus from the extended search it picks the SC created date and displays the SC, my requirement is to make the date as the approved date insted of SC created date with the status as aprpoved.
    Please suggest if this is possible with the help of any Badi.
    Regards
    GGL

    I managed to find the solution myself. If anyone is interested, just follow those steps here:
    http://apple.stackexchange.com/questions/44913/make-a-custom-keyboard-layout-the -system-default-even-for-the-login-screen
    (terminal skills required tho)

  • 5-screen (multi-monitor) nVidia xorg.conf -- my setup

    Hi. I would like to share my xorg.conf, since it took forever to get right.
    There isn't a lot of information out there for folks using > 2 monitors, or several graphics cards, or esoteric setups including rotation etc. I hope this will be useful; I wouldn't mind contributing to the wiki if anybody thinks it might be useful.
    So first up: hardware. I have
    nVidia GeForce GTX 550 Ti connected to a 24" monitor (in the middle)
    nVidia GeForce 210 connected to two 19" monitors, rotated into portrait (on either side of the 24")
    nVidia GeForce GT 440 connected to two 15" monitors (above the 24")
    here is a picture of the monitors, click for a bigger version
    Drivers: I'm using the official nVidia drivers, I couldn't get nouveau to work. Since I am using Xinerama, the XRandR extension isn't loaded -- therefore my setup won't be suitable for people whose screen configuration changes dynamically. But I'd prefer not to use Xinerama, and even to use nouveau if possible; if anybody has a similar configuration working with nouveau, please share
    Finally, the actual config itself. Here it is on pastebin.
    Rotation
    The correct way to rotate monitors in xorg.conf is through the metamodes option of the Screen section. On my Screen 2 and 4 (the two 19" monitors), you can see that
    { Rotation = left }
    has been added at the end of the metamodes option. Contrary to some other guides floating around, it is not necessary to specify these options:
    # Unnecessary
    Option "RandRRotate" "on"
    Option "Rotate" "right"
    I believe these come from an earlier version of Xorg. They don't have any effect when I put them in my xorg.conf, using Xorg 1.12.4 and nVidia 304.43.
    Even when I specified rotate in metamodes, my monitors didn't appear to rotate because I had originally written
    Option "metamodes" "CRT-1: nvidia-auto-select +0+0 { Rotation = left} "
    instead of
    Option "metamodes" "DFP-1: nvidia-auto-select +0+0 { Rotation = left} "
    This just made rotation fail silently, with no error message. Make sure to specify DFP if you're using a digital output (DVI, HDMI, DP) and CRT only if you're using a VGA output on your graphics board.
    Tips
    When you're testing out a new Xorg.conf, you can use
    startx -- :1
    to start a new X server without killing the current one. See if your configuration works, then switch back to your original X server by pressing Cmd-Alt-F7.
    You should also keep a log of different configurations you have tried. You can use a version control system like git to track changes to your Xorg.conf; make sure you document every change you have made, and why, it can prove invaluable later on.
    Feel free to ask about this setup. I would like to know something: what is the function of the Screen option in the Device section? On the four Device entries for my nVidia 210 and 440 cards, there is an option called Screen; when I take it out, the setup breaks. Why are they there? And why do they not map to the screen numbers in the Screen section? (They are numbered 0, 0, 1, 1 rather than 1, 2, 3, 4)

    Thank you for the reply. I read the wiki page, but unfortunately I am still struggling with my two nvidia gpu, three monitor setup.
    The red arrows show the pointer progression through the monitors (moving mouse left to right). When the cursor is on the top monitor, it becomes an X, and the screen is black.
    Here is the matching xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 331.67 (buildmeister@swio-display-x86-rhel47-08) Fri Apr 4 12:26:05 PDT 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Acer G236HL"
    HorizSync 30.0 - 80.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "Acer X223W"
    HorizSync 31.0 - 83.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GT 610"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "CRT-1"
    Option "metamodes" "VGA-0: nvidia-auto-select +0+0, DVI-I-1: nvidia-auto-select +1920+0"
    Option "SLI" "Off"
    Option "MultiGPU" "Off"
    Option "BaseMosaic" "off"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Device1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "CRT-1"
    Option "metamodes" "nvidia-auto-select +0+0"
    Option "SLI" "Off"
    Option "MultiGPU" "Off"
    Option "BaseMosaic" "off"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Based on this post on archlinux, I took a crack at matching the xorg.conf pattern above (monitor/device/screen sections) with my own. I took it as a victory that it actually didn't error (many xorg.conf experiments have in the last couple of days have). Here is my new xorg.conf with 3 screens/3 monitors/3 devices:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.67 (buildmeister@swio-display-x86-rhel47-08) Fri Apr 4 12:26:16 PDT 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    Screen 2 "Screen2" RightOf "Screen1"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "1"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "dbe"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "leftAcer"
    VendorName "Unknown"
    ModelName "Acer G236HL"
    HorizSync 30.0 - 80.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "rightAcer"
    VendorName "Unknown"
    ModelName "Acer G236HL"
    HorizSync 30.0 - 80.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "topAcer"
    VendorName "Unknown"
    ModelName "Acer X223W"
    HorizSync 31.0 - 83.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "geforce-9600-gt-0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "geforce-9600-gt-1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Device"
    Identifier "geforce-gt-610"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GT 610"
    BusID "PCI:2:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "geforce-9600-gt-0"
    Monitor "leftAcer"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "DFP-0"
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-0"
    Option "MetaModes" "DFP: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "geforce-9600-gt-1"
    Monitor "rightAcer"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "DFP-1"
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-1"
    Option "MetaModes" "DFP-1: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "geforce-gt-610"
    Monitor "topAcer"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "DFP-0"
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-0"
    Option "MetaModes" "DFP-0: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Disable"
    EndSection
    This what appears with the new xorg.conf:
    "leftAcer" and "rightAcer" appear, but nothing appears on "topAcer" (it appears not to be getting a signal from the gpu). I can move the mouse pointer between "leftAcer" and "rightAcer".
    Any help or advice would be greatly appreciated. Here are a few details about the hardware setup:
    GeForce 9600 GT is in the PCI:1 slot. It's DVI out is going to "acerLeft", it's VGA out is going to "acerRight".
    GeForce GT 610 is in PCI:2 slot. It's VGA out is going to "acerTop".
    thanks!

  • I have IPAD 1 and I would like to sharing the screen to monitor TV (video,photo,app). What are the options?

    I have IPAD 1 and I would like to sharing the screen to monitor TV (video,photo,app). What are the options?

    Unfortunately you do not have any options, the iPad one cannot be used for mirroring.

  • Status display in monitor

    Hi experts,
    In the consolidation monitor, I've got consolidation group hierarchy (company) called H1, and bellow all companies.
    When I execute the function of data collection at the consolidation group level (H1) in the update mode, it executes the function for all companies, and even though some companies may not have the data, the status of all companies is the same: without errors, but with warnings.
    It's hard to manage the consolidation process because I can't track which companies have submmitted the data and which haven't submitted, I mean visually in the monitor.
    My question is: Is the status in the monitor workind correctly, and how can I track by task each company status?
    Thanks in advance,
    Edited by: Beatriz Fitzgibbon on Sep 5, 2008 11:50 AM

    Yes the status is updated correctly. The wya to determine whether or the data has been collected is to have a task subsequent to the data collection for a validation to check this.

  • Where is the downloads status screen in iTunes 11?

    Where is the downloads status screen in iTunes 11? I use this to manage bandwidth and prioritize downloads.

    The download status used to be listed under the purchased content playlists visible only when there were active downloads. It is now an icon just to the right of the search pain again only visible only when there are active downloads. Click on that icon and a new windows opens. Don't blink, you might miss it.  At least is is resizable.....

  • Calling 'Status' screen of transaction IW32 from report

    Hi,
    I want to display 'status overview' screen from transaction 'iw32' .
    I know how to call transaction 'iw32', but I don't know how can
    I directly go on status screen? I have order no with me.
    Can anyone help me?

    Hi,
    You can get the user status data directly from the following tables:
    Pass on the order number to JEST table to fetch the STAT (status) for which INACT field is a blank (means status those are active in the order). You will find the status in the form of E001 or I001 depending upon the user status or system status respectively.
    Now goto TJ30T table where you need to pass the status profile (STSMA) which can recovered from the order number and fetch the status text by comparaing ESTAT with the status received from JEST table. Field TXT04 in TJ30T gives the status text.
    Hope you will find this helpfull.

  • How to disable the print icon on check status screen of shopping cart inSRM

    Hi Experts,
    I have a requirment in which I need to disable print Icon on the status screen of the shopping cart.
    Can anybody please let me know how to achive this requirement.
    Thanks,
    Arun K Singarapu

    Hi Here you go some useful code for the requirement.
    wafunc = 'BWD'.
          APPEND wafunc TO functab.
          wafunc = 'FWD'.
          APPEND wafunc TO functab.
          wafunc = 'DIS'.
          APPEND wafunc TO functab.
          wafunc = 'COP'.
          APPEND wafunc TO functab.
          wafunc = 'IGN'.
          APPEND wafunc TO functab.
          wafunc = 'SAVE'.
          APPEND wafunc TO functab.
          wafunc = 'HIS'.
          APPEND wafunc TO functab.
          wafunc = 'CONTACT'.
          APPEND wafunc TO functab.
         SET PF-STATUS 'OBJECT_SEL' EXCLUDING functab.
    Bala.M

  • Insert column into shopping cart status screen

    Hi,
    I need to insert a column into the shopping cart status screen table control( search results).(BBPSC04).
    Can u pls let me know whether i can achieve this by adding an append structure or standard screen modification?
    Cheers
    Rajeev

    Hi,
       Instead of modifying the std structure,try modifying the corresponding template of the service.
    BR,
    Disha.
    Pls reward points for useful answers.

  • ARD 3.2.2 - Current Status - Screen Sharing Available

    Hello,
    like several other users i do have a problem with some of our mac client computers in ARD 3.2.2
    Usually those Macs do display a Current Status in ARD like:
    Idle (time)
    or
    Available
    which we would call an expected state.
    Unfortunally some macs tend to show another status:
    "Screen Sharing Available".
    This other status results in: a working screen sharing in ARD
    BUT other tasks like i.e. UNIX Commands send from ARD to this hosts just dont work as ARD end in the following error message:
    The Remote Desktop Client software is not active on HOSTNAME
    So as a quick test i ssh'ed into 2 macs, one of those was affected by the problem. Comparing the output of
    ls -la | grep Remote
    and the result is totally same.
    So both macs showed me:
    AppleVNServer
    ARDHelper
    ARDAgent
    Then i checked the firewalls on those macs and each firewall has the default ports 5900 & 3283.
    The only problem here is that i cant define UDP or TCP on 10.3.9 Macs.
    The macs do run Mac OS X versions from 10.3.9 up to 10.5.6
    Sometimes a simple reboot fixes the "Screen Sharing Available" issue.
    Right now i am wondering how to fix this issue as some threads do suggest re-checking firewall settings ( which i did ) others suggest using a local administrator insteed of the admins name in Sharing.
    Right now none of those hints worked for me and i am wondering if this is a known bug and if there is a known solution.
    any help is appreciated
    Best regards
    fidel

    I have been experiencing the same problem now for months -- various Macs on my network that I control/administer with ARD 3.2.2 intermittently displaying a status of "Screen Sharing Available".
    After reading through this thread, I started poking around in System Preferences on my client Mac (from which I control/administer the others), and I appear to have fixed my problem! I have no idea if this will help anyone else, but here's what I did:
    In the "Security" preference pane of "System Preferences", I clicked on the "Firewall" tab. The ensuing window contains a list of applications, each followed by a pop-up menu containing two options: "Block incoming connections" and "Allow incoming connections"
    Sure enough, "ARDAgent" was in the list of apps and sure enough, it's setting was "Block incoming connections". I changed this setting to "Allow incoming connections", switched back Apple Remote Desktop, and hit Command-Y to refresh the listing of ARD computers on my network (I did not even quit and re-launch ARD). The list was immediately updated, and ALL of ones that had been showing "Screen Sharing Available" in the "Current Status" column switched to "Available" or "Idle (time)" and their icons switched from pale blue to the normal, darker blue.
    Problem solved (at least for now)! Will report back any changes/updates.
    Additional information, for those that are interested:
    I have 12 Macs on my office LAN that I control remotely from the iMac on my desk (same office, same subnet). All are running ARD 3.2.2.
    The iMac on my desk is currently running Mac OS X 10.5.6. It is a first-get Intel iMac.
    The 12 Macs on the network are running various versions of OS X from 10.3.9 to 10.5.6. All but one are older PPC Macs; one is a newer, aluminum Intel iMac. As of this morning, all three that are running Leopard were working correctly with ARD, while the results were mixed with the others running both Tiger and Panther. From this, I can only conclude the OS version on the various server Macs makes no difference with regard to this problem, although it MAY be that those running Leopard are immune. I cannot be sure of that, however.
    Hope this helps. Good luck.
    Message was edited by: Richard Neil for clarification

  • Agent has disabled full monitoring of this target. Only target Status is being monitored.

    The following warning is displayed when going through the following:
    Database instance (target type)
    Oracle Database > Monitoring > All Metrics
    "Agent has disabled full monitoring of this target. Only target Status is being monitored."
    Triggered by the following:
    Summary
    Due to 5 hung threads, the target is having all collections disabled
    Internal Event Name
    CollectionsDisabled:HungThreads
    Event Type
    Target Monitoring Disruption
    Category
    Unclassified
    Following actions executed to attempt resolution:
    + Database has been bounced, error is resolved
    + Clearstate agent
    + re-enable all collections manually: Metric and Collection Settings > collection schedule column; enable
    + Bounce agent
    OMS Version: 12.1.0.4.0
    Agent Version: 12.1.0.4.0
    Anybody have any ideas on how to clear this error?

    emctl clearstate agent TARGETNAME,TARGETTYPE
    emctl status agent scheduler
    emctl status agent target <Instance_name>,oracle_database
    emctl status agent dbconnections
    Try to colelct the particulare metric
    emctl control agent runCollection TARGETNAME:TARGETTYPE COLLECTIONITEM
    Finally, Observer the error message any on the log
    agent_inst/sysman/log/gcagent.log

Maybe you are looking for