POA won't load after Server Crash - 8209 file not found err

Groupwise server crashed recently (apparently from bad RAID controller, which has been replaced). Server is back up an running now (SLES 10 sp3 VM running under XEN, GW 2012 sp1). Have performed a rebuild on Primary Domain and also on single Post Office. MTA loads OK, as does GWIA but POA fails to come up, giving "Path Not Found - 8209 error" message. Path to WPhost.db is correct both in C1 and in the startup file. When loading POA with --show option, I see the aforementioned error and then when I clear that I see on the screen (for a brief moment):
"Rebuilding Guardian Database because of C0221... please stand by"
Then it terminates and screen disappears.
I know that restoring from backup is one option, but that cannot be done until Monday at the earliest and that, of course, is dependent on having good backups. Therefore, I was wondering if there is a way to fix this problem to get the system back up quicker. Any ideas would be greatly appreciated! Thanks.
Don
P.S. There is only 1 Primary domain and 1 PO in this small GW system and yes, I know, one should have at least 1 secondary domain.

Thanks for the suggestion, Danita.
OK, I backed up all copies of ngwguard.* from the PO directory. Then, I deleted ngwguard.db and copied the ngwguard.fbk (same exact file size as the deleted ngwguard.db) from ofmsg/guardbak folder to the PO directory as ngwguard.db. Now, I did notice that there was no ngwguard.fbk in the PO directory but instead a ngwguard.dba file, which I left as is. I then started the POA - ./gwpoa --show @po.poa & and now it no longer gives me "Path Not Found" error, but instead it displays:
"opened a file that was not a flaim file C03F"
I click OK on this warning and then POA monitor screen displays for 2 seconds "rebuilding ngwguard.db ..." before it bails and terminates.
So, is it looking more and more like a ngwguard.db problem as opposed to wphost.db? And, I am of course curious why using that backup of ngwguard would not work. In any event, today I will be trying to get backups of wpdomain.db and wphost.db off of tape and perhaps I should restore ngwguard.db as well - this is dependent, of course, on having a good backup that is restorable. If that is not the case, is there an option to rebuild the ngwguard.db file? Thanks.
Don
Originally Posted by dzanre
donahueit wrote:
> At this point could this be more a problem with NGWGuard.db than wphost.db????
> I am starting to wonder.
Quite possibly. You do need both a wphost.db and an ngwguard.db file for the
POA to properly load. There should be two relatively "new" copies in the
system:
ngwguard.fbk in the same folder as the PO, and then the ngwguard.fbk in the
ofmsg/guardbak folder.
Try copying one of these as ngwguard.db in the PO folder, and if that doesn't
work, you will need to go to "backup" to restore.
Danita
Novell Knowledge Partner
Do you have Willem Bagchus' GW 2012 Admin Guide?
http://www.facebook.com/caledonia.net

Similar Messages

Error on WWI server EHS_GLM_GENSERV: Results file not found on production

Hi Experts,
I need some help/advice. We have issues with our new EH&S WWI server.
This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
Only difference between existing WWI QA and production server is that
Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI
And Same path maintain on new server C:\Program Files (x86)\EHS\WWI
But existing production WWI server installation path is different C:\Program Files\EHS\WWI
So is there any customizing changes required from SAP side to avoid this error on production
Can you please advise on this.
================================================================================
Error on WWI server EHS_GLM_GENSERV: Results file not found
Message no. C$830
Diagnosis
The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
System Response
Generation was not carried out.
Procedure
Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
Check the Windows event log on the WWI generation server. The event log may contain other error messages.
SAP Note 1058521 provides possible solutions for this error.
==================================================================================
Log shows
============================================================================================================================================
E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
================================================================================================================================================

Hello Gajanan,
the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
For ECC 6.0 Ehp 0-2 and lower
Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
For ECC 6.0 Ehp 3-6
Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
For ECC 6.0 Ehp 7
Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data

Terminal Server User license file not found or User ID not matched.

Hi,
I recently went for the Process Runner, downloaded trial version and wanted to work with Ides system, but at the very first step the system throws the following error:
"Terminal Server User license file not found or User ID not matched.
and the details are as follows:
Process Runner 2008
Version : 4.20.10
Supported file version: 7.3
Current Framework: 2.0.50727.42
User Name: Demo User
Licensed To: Demo Company
Product Id : PR-ALL-DR-MTH-CU
Full Version : 4.20.10.9579
Current UserID : Administrator
License Type : Evaluation/Demo License
Evaluation Days : 1 of 30
Licensed Uses : 5 of 15
Expiration Date : 12/31/2011
COMPANY : Demo Company
MAX_ROWS : 30
MAX_THREADS : 3
USER : Demo User
Current Node Id : DAAB-AA43-58DB-00DB-4862
Max Instances Allowed : N/A
OS-Office culture info : en-US | en-US | en-US | en-US
C-Info : en-US
Computer : SAPSERVER
Current Domain : WORKGROUP
OS : Microsoft Windows NT 5.2.3790 Service Pack 1
AppPath : D:\Vijj downloaded\Process Runner
MyDocPath : C:\Documents and Settings\Administrator\My Documents\Innowera
Terminal Server User license file not found or User ID not matched.
Can anybody guide me please.
Thanks.

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

After System Copy warning file not found

Hi experts,
I got warning in my db2diag.log after performing system copy. My current SID is Q01 and previous one is P01.
2010-08-05-15.01.07.680835+420 E719728A497        LEVEL: Warning (OS)
PID     : 1703936              TID : 1           PROC : R3trans
INSTANCE: db2q01               NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloqualifydir, probe:30
MESSAGE : ZRC=0x860F000A=-2045837302=SQLO_FNEX "File not found."
          DIA8411C A file "" could not be found.
CALLED : OS, -, unspecified_system_function
OSERR   : ENOENT (2) "No such file or directory"
DATA #1 : File name, 15 bytes
/db2/P01/db2p01
Somehow after performing tp, R3trans. Db2diag.log show warning in accessing old path SID /db2/P01/db2p01.
I know it just warning but I wondering if this warning could lead to another error.
Any input will be appreciated.
Many thanks,
Aswin
Edited by: aswin cahyadi on Aug 5, 2010 10:14 AM

Hello Aswin,
As it seems to be the R3trans process that is linked to the warning message, please check the path definitions in your transport profiles. Check the directory, transport tool etc in STMS. Checck for any mention of the old sid.
Regards,
Paul

CS6:Server Link Error:"file not found: @executable_path/ObjectModelLib.dylib" ?

Hi all,
I'm trying to update my old code in CS5.5 for building new CS6( Server build), i get the link error "file not found: @executable_path/ObjectModelLib.dylib " not sure what I missing in my project settings/items? Any thoughts or help would greatly appreciated.
Thanks,
Kamran
P.S I use Mac OS X 10.6.8 and Xcode 3.2.6. for Model & UI build for the same project it builds fine.

Never mind guys, I can compile it fine now :-)
-Kamran

Ipod won't update pictures or videos: required file not found

I have tried everything in the support site and still keep getting this message when I try to update photos or videos for the ipod.
"The iPod "iPod" cannot be updated. The required file cannot be found.
Any suggestions? Getting very frustrated and my computer is scared!!!
iPod video Windows XP

http://www.videora.com/en-us/Converter/guides.html
Conversion Guides
This page will guide you through the entire process of ripping video off of any DVD and getting it onto your iPod. Most steps contain actual screen shots that show you exactly what you will see on your screen and exactly where to click and/or what to look at to perform that step.
http://www.videora.com/en-us/Converter/xcast.html

PDF preview not working in ITS after patch31 - HTTP 404 file not found

Hi Friends,
We installed Patch 31 on ITS 620.
Previousl patch level was 17.
The functionality to show pdf preview using FM 'SSFCOMP_PDF_PREVIEW' is not working.(Which is working fine when viewed from SAP GUI)
We are getting 'HTTP 404 - File Not Found' error.
What could be the reason?
Any help on this is highly appreciated.
Thanks,
Simha
Edited by: Simha on Oct 30, 2008 3:03 AM

problem not resolved and we reverted back to older patch.
Closing this thread

After Effects CS3 error: file not found -43 and TIFFIO failed to open the file

Hello
I am experiencing a problem with AE CS3.
I have several TIFF sequences (with alphas) that are giving me a headache. When I import them into AE, I get an "AEGP Plugin TIFFIO: Failed to open the file" error.
I researched the forums and found that this could be related to odd formatting of the source media (my TIFF sequence). I created these TIFFs in Maya 2008 and I have imported other sequences made with Maya into AE with no issues.
Just to be sure, I created a Photoshop droplet that re-saved my TIFFs as Photoshop TIFFs with the same names.
I re-imported the new Photoshop TIFF sequences (still with alphas) into AE CS3, and I get the same error.
Any ideas? I don't know what to do next.
Thanks,
-------------S

Your USB drive may have had a weird character in it's name.
AE can't read CMYK images, that is usually the problem.
Imported images do not have to conform to any specific sizes (unless you want to go over 30,000 x 30,000 pixels.)
- Jonas Hummelstrand
http://generalspecialist.com/

My apps won't load after updating to iOS4.3.2. What to do?

My apps won't load after updating to iOS4.3.2. What to do?

Yes, I tried that (thanks for the suggestion, though!). In my music app, when I click on certain songs, the screen moves to try to start the song, but then it bounces back to the menu screen without playing the song. On many albums, when I click on the first song, a song about halfway through the album will start to play rather than that first song. My other apps seems to be fixed, but not the music function.

Lightroom 5 won't load after 30 day trial of Lightroom3 error.

I tried the 30 day trial of Lightroom 3 that I got with the Photoshop Elements 10 when I got my new computer. The Lightroom loaded one picture and said I had an error and would try to find a solution. I bought Lightroom5 and tried to install it and it keeps going back to the error of Lightroom 3 trial. I tried to delete all programs associated with Lightroom and reinstall, but nothing happens.

it just reads "Lightroom-Opening Catalog:New Years Day 2014 031.JPG.Ircat assertion failed!
New Years day 2014 is a folder and 031 is the picture in the folder that I tried to enhance in the 30 day free trial of Lightroom 3. I bought Lightroom 5 from B &H and it appears to be hung up on the Lightroom 3 trial.
kglad <[email protected]> wrote:
kglad http://forums.adobe.com/people/kglad created the discussion
"Re: Lightroom 5 won't load after 30 day trial of Lightroom3 error."
To view the discussion, visit: http://forums.adobe.com/message/6048439#6048439

Old emails won't load after upgrade to Mountain Lion

old emails won't load after upgrade to Mountain Lion

See if anything in here will fix it:
1. Hold down the Command and Option keys as you click the iPhoto icon.
The Photo Library First Aid window opens:

I tunes store won't load after 11.1.3 update

I Tunes store won't load after i updated itunes . Its the 11.1.3 update

Hello Papamax,
And welcome to Apple Discussions!
Have you ran an iTunes *Network Diagnostics Test* yet? If not, use the steps provided in this Apple support document to do so, and then paste your results here.
http://support.apple.com/kb/HT3204
Also, try temporarily disabling McAfee and see if that helps. And make sure you have allowed iTunes through its firewall, by using the instructions provided in this article.
http://www.technipages.com/allow-program-access-through-mcafee-personal-firewall .html
And lastly, see if any of the troubleshooting steps provided in this Apple support document can assist you.
[iTunes for Windows: iTunes Store connection troubleshooting|http://support.apple.com/kb/ht1527]
B-rock

Acrobat won't load anymore, and says it is not activated (but it is).

Acrobat won't load anymore, and says it is not activated (but it is). It won't create PDFs from other programs either. It worked a minute ago, but now not at all.

Hi H K ,
I would suggest you to refer the following and see if that helps.
http://www.itjungles.com/fixed-adobe-acrobat-error-adobe-pdf-creation-cannot-continue-beca use-acrobat-is-not-activated.html
Regards
Sukrit Dhingra

I'm running OSX 10.6.8. I have final cut studio 6.0.6. The compressor aps won't load. I get a compressor not loaded properly pop-up. I have loaded twice and still no compressor.

I'm running OSX 10.6.8. I have final cut studio 6.0.6. The compressor aps won't load. I get a compressor not loaded properly pop-up. I have tried reloading but still no compressor.

Start by repairing permissions. Then remove Compressor using this utility:
FCS Remover - Uninstall Final Cut Studio, Final Cut Pro, Motion, Compressor, Soundtrack Pro, Color, DVD Studio Pro, LiveType, Cinema Tools
Then reinstall and try to load Compressor. If it fails, post the error statements here.
Good luck

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

POA won't load after Server Crash - 8209 file not found err

Similar Messages

Maybe you are looking for