Poblems with dvd rom on 865pe

I just had a format,installed everything,everything works fine except that when i put a DVD into my dvd rom,it won't play,it say's that there is no cd in the dvd rom,regular cd rom's do play...I use the same setup as before,except that now I use a SATA maxtor drive and before a ATA drive,what could be the problem? something in the bios?I installed the inf driver...my SATA drive is primary master and my dvd rom secondary master. Also when I connect an extra ATA hard drive as secondary master and the dvd rom as secondary slave he do read the dvd's...i just don't get it,please help and sorry for my bad english!
Thx in advance!

Yes, I understand that from your last post. I'll explain again: If you set any IDE drive's jumper to slave mode, no matter primary or secondary, it must have a master IDE drive(jumper set to master) to detect it. In you case of SATA + HDD + DVD and DVD don't read is simple because, you SATA drive is standalone on Serial ATA controller, your HDD jumpers is being set as master drive already, so it will be detected as master no matter in Primary or Secondary controller. Thus, your DVD drive's jumper is being set as Slave, therefore, no matter if you put it in Primary or Secondary controller, it will not be the master driver due to the jumper settings and in turns need another IDE drive being set as master from it's jumper (your ATA HDD in your case) to be connected as the DVD drive's master so the DVD drive can work as a Slave.
Now, just simply pull out that little jumper from the DVD drive and put the jumper to the pins where it's indicated as Master as labelled on the drive itself and everything will work without the additional HDD to support.
All the Best... :D!!!

Similar Messages

Authoring problem with DVD-ROM content, Authoring problem with DVD-ROM content

Out of nowhere, I can't seem to add DVD-ROM content to my latest DVD. The folder is about 1100 photos and weighs in at 1.6GB. The content is accepted, the DVD burns and all seems right until you try to access the DVD folders. The video plays beautifully. The folder structure displays but I can't even get the VIDEO_TS folder to display detail consistently. This isn't my first time to the fair, I've been authoring with DVDSP for 8-9 years.
I went back and reviewed the the procedure step-by-step, I even re-named all the photos to comply with ISO 9660 naming conventions... no joy. I've
burned it with and without the Joliet Extension Support, no difference.
I'm on an (early 2008) 8x3.2GHz Mac Pro running Snow Leopard (10.6.8) and FCS3.
Anyone ever seen this? I'm stumped.

Michael, thanks for the response. It turns out it's both the size and quantity of photos.
I feel stupid for not solving this earlier, but it took a trip to one of my back-up systems to see the problem:
The SuperDrive simply doesn't have the bandwidth to quickly transfer sufficient info to display these additional folders. I tried the same DVD on one of my souped up G5 dualies (with new 16X burner) and it seemed to incrementally display the folders. That's when I realized that a DVD with a couple of GB of video on it is a poor display system. LOL
I'll re-organize the data into more, smaller folders and instruct the recipients to be patient or drag the folders to their desktop.

Replace CD-rom trayloading with DVD-Rom?

im new to mac. Adopted an old mac (G3 tray loading) from a friend. Found out it doesn't have a DVD-Rom. So I started to wonder if it is possible to replace the CD-Rom tray loading with a DVD-rom slot loading.
After surfing the net for ages I still haven't found the anwnser to my question. The only thing discovered is that it will fit, if it works is an other issue, Can someone help me with this?
Thanks
JP

If you mean to use a slot-loading DVDROM drive from the later slot-loading iMac, it works but it does not fit. I'll explain...
At the back of the tray-loading CDROM drive is a thin adapter board. The board converts the drive's connection to an unusual small 50-pin ribbon cable which goes to the motherboard.
At the back of the slot-loading DVDROM drive is a similar adapter board. However, it converts the drive's connection to a different type of ribbon cable, I think it's the more typical 40-pin connector.
You can remove and swap the two adapter boards. Unfortunately, the board from the tray-loader fits backwards (up-side-down) on the slot-loader. Therefore, it sticks out on the right side and does not fit in the case. The screws that secure the board in place also no longer fit. However, it does work that way (it just does not fit in the case).
I know it works because I have a tray-loader iMac that is no longer +in its case+. I use it with an external display because my analog video board failed a long time ago. When my CDROM drive also failed, I bought a slot-loader drive on eBay. Since my iMac is not constrained by the case, it works. It reads DVDs fine. However, it will not play DVD movies; I have installed DVD Player and third-party software, but DVD movies will not play. I'm sure it's a limitation of the video hardware.

Can I swap the CD-RW with a DVD-ROM from older iMac?

I have two slot loading iMacs.
1)iMac DV spec ed. 400 MHz with DVD-ROM from Oct. 1999
2)iMac spec. ed. 700 MHz with CD-RW from summer 2001
Can I put the DVD-ROM from iMac 1 into iMac 2, i.e. take out the CD-RW from the newer iMac and put in the DVD-ROM from the older iMac ? Or is the DVD-drive too old ?
Thanx
Martin

I don't see any reason this wouldn't work, but I'd have to wonder why you'd want to do this. a CD-RW is much more useful, in my personal opinion, than a DVD player on a computer.

Blu-ray says capacity too big when burning DVD Rom Folder Encore CS4

I have tried 3 times now to burn a Blu-ray Image file with a DVD rom Content Folder. The Blu-ray Image size is 45.90gb and the content folder is 1.6gb. The disk is a Sony DL 50gb Blu-ray. I have not tried to burn direct to disk because cost of Blu-rays. I am using Encore CS4. Is it that you cannot make an image file with DVD-rom for DL Blu-rays. Is there a number preset by Adobe for image file size for DL Blu-ray. Please help

45.90 GB on your hard drive and 1.6 GB on your hard drive add up to 47.60 GB.
In computer GB, (47.60 x 2^30) that's over 51 billion bytes. Sony and other blank media manufacturers report the capacity of their blank discs in normal GB (50 x 10^9), or 50 billion bytes.
Your project is too big to fit on the blank media that you have.

DVD Rom Photos greyed out

I have burnt a disk with DVD-Rom content but I cannot access the photographs because on the disk as they are greyed out. The content folder allows me to the photos but as I say the photos are greyed out.
The disk is DVD-RW.
Cheers
Steve Hill

Not 100% certain but you may have a media issue and/or burn speed issue.
Did you try making a disc image first (from the file menu)?
If not, try it and then use apple's dvd player app to test proper playback and content.
When you get ready to burn to DVD-R or DVD-RW make sure to lower the burn speed with apple's disc utilities / toast to 2x or lower.
For troubleshooting and while on this forum please use only Verbatim / Maxell.
Hope this helps but if not come on back.

915PL Neo-V dont boot with DVD

Hi, i have a big problem.. i need to install a OS Suse Linux with DVD-Rom..
but my system don't boot ....need's help please!
boot seguence:
1 - cdrom
2 - hardk
3 - floopy
what's the solution for this? what i must do? thanks!
(sorry for my english, i'am brazillian)

Try this:
Start your pc and hit F11 when the POST screen shows up;
After that, you should get a boot menu with all your disks / drives;
Select the DVD-drive you want to boot from manually.
Now, it should start from DVD. If it does not, you should see an error.

Can I install OS 10.4 DVD on G3 B&W (CD-ROM only) from Mac Mini with DVD?

I have G3 B&W 400Mhz 384Mb memory 9Gb hard drive.
It has CD-ROM, Zip Drive, Firewire, USB & Ethernet and currenty running on OS 10.2.
I'd like to upgrade to OS 10.4, but it's on DVD.
I also own Mac Mini G4 with DVD-RW, and I can connect it to G3 with Firewire using Target Drive Mode. G3 recognize Mac Mini as a hard drive.
Can I install OS 10.4 from Mac Mini? Thank you for your help!

zakuro7 wrote:
Can I install OS 10.4 from Mac Mini?
If you mean the 10.4 DVD is a full-retail copy for any machine, not the version that came with the Mac mini.
BDAqua wrote:
...put the Mini in Target Mode...
some additional info on Target Mode
http://support.apple.com/kb/HT1661

DVD DL with a DVD-rom part

Hi,
With DVD SP 3.0.2, I'm trying to burn a DVD-DL, containing a DVD-video part (2,1 Go) and a DVD-rom part (4 Go). The layer is set to Dual and the Break Point is set to Automatic. DVD SP reports an error :
"Formatting Failed.
Formatting was not successful. A suitable marker could not be found in the required layer break range. See DVD manual for more information."
I think that the problem is that the DVD-rom part is bigger than the DVD-video one, and a marker can only be on the video part. As layer 0 needs to be larger than Layer 1, the break point should be on the DVD-rom part. DVD SP3 seems unable to do this. Does further versions of DVD SP can do it ?
I also thought of burning with Toast, but I don't think that Toast will include the DVDaccess function. Am I right ?
If anyone as an idea that could help me...thanks !

Do you have any markers in the video towards the end of the video? If not try adding one and seeing if that helps.
How big is the video? (size) Did you do a build? You could also add/duplicate the track and add chapter markers in there to force things if needed.
Take a look at these threads, there are others but this should help..
http://discussions.apple.com/thread.jspa?messageID=8096861&#8096861
http://discussions.apple.com/thread.jspa?messageID=7721738&#7721738

Is it possible to share assets between a windows and a mac AIR app build with captive runtime on one dvd-rom?

Hi there,
I have a question about burning two builds of an AIR desktop app with captive runtime, one for Windows and one for Mac, on a single hybrid DVD-rom that can be played on both Windows computers and Macs.
I've tried sharing the assets (video's and pdf's mostly) between the two builds, but I can't seem to get it to work. The only way I have been able to work around this, is to have the assets in both builds, which results in the double the amount of space on the DVD-Rom.
Is there a way to have the two builds use a single location to find the files? Or do I need to have two builds that both contain all the assets?
Thanks in advance!
Kinds regards,
Maarten

Gotcha!!
I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
Thanks everyone.
~ Narey

Idvd project with video and slideshow for dvd-rom file access

working on an idvd project with both a video section and photos in a few photo galleries. its' a slightly more complex project, but still only 2gb on a 4gb disc. After we burn (with all dvd-rom contents checked, and advance>edit dvd-rom contents shows photo files all there) the finished disc doesn't have files available in the dvd-romcontents! its' driving us mad as simpler projects are burning properly, with both photo and video files available. Could there be some kind of conflict occurring? does anyone have any ideas?!
17" Desktop G5 Mac OS X (10.4.2)

Steve,
It sounds like Windows Movie Maker Live was used. The regular WMM will Export to DV-AVI Type I, which will Import into PrPro much better.
I would recommend converting the WMA/WMV to DV-AVI, and Importing that into a DV NTSC (if you are in NTSC-land) Project.
Then, you would use Encore to do the DVD authoring. There are several ways to get the material on your Sequence into Encore. ADL (Adobe Dynamic Link) is probably the easiest way to do this.
What is your exact workflow from PrPro, into Encore?
What brand of blank media are you burning the DVD to?
This ARTICLE will give you some tips.
Good luck, and let us know a bit more,
Hunt
PS - Multiplexing is the function of combining the Audio and the Video into one file. There are usually two choices, "None" and then often "DVD." For None, you will get two separate files - one for the Audio and one for the Video. With "DVD" you should get a muxed (combined) file. Actually, the separate Audio and Video is the preferred way, if one is doing an Export from PrPro, and then an Import to Encore. One would Import the Video into Encore as a Timeline, and the Audio as an Asset. In Encore, just drag the Audio file from the Project Panel to the appropriate Timeline, where it will snap into place.

Have a canon dc310 camcorder that uses mini dvd's. How can I get my new Imac to read these dvd's?Camcorder unable to connect to computer. Will a mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with a mac?

I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer. How can I get my new Imac to read these dvd's? Will the mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with the Mac? Do I need anything else to get the dvd material onto my mac? Thanks!!

No DV port in camcorder. Just a yellow AV port/hole. I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's. Can I use this with a Mac? Could I connect a dvd player to the Canopus and transfer the disks onto my Mac? Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way? Thanks again!

Replaced DVD-ROM with 18x MCE Superdrive. Will not complete a DVD burn!!!!

updating my gigabit ethernet dual 450 G4 powermac. swapped out the original dvd-rom drive with an 18x SuperDrive from MCE. Running Panther 10.3.9 with all updates. Machine has upgraded 120GB hard drive, 512 RAM.
Driver loads from MCE install disc. Using Toast 7.1.2 to burn a data DVD-R using automatic "best speed" setting. Drive revs up and "writing lead-in" appears in Toast window, but no blue in the progress bar. Toast then says :Writing disc", and displays a time (usually 1:40), but does not count down. Eventually, the drive becomes silent and the burning process just hangs there. I've let it hang for about an hour. Tried burning a DVD-R with 20MB data, up to a disc with 2GB data, and same thing happens. I then abort the burning process, having to Force Quit 5 times to close Toast, then restart. OS prompt appears as Toast opens, saying "disc contains no volumes blah blah, eject, ignore etc). I eject the DVD-R and ALWAYS on the write surface, there is about a 1/2" of data that appears to be written, but the disc is obviously unreadable. I have wasted 7 out of the 10 free DVD-Rs that came with the MCE drive. Used PatchBurn 3 and it says drive is already supported. System Prof says burning is "vendor supported".
Tech support on the phone asked about master/cable settings. Superdrive is master (as was original DVD-Rom I removed), and I kept intact the Zip 100 drive underneath, which has no jumper plug on either of the 3 sets of jumper pins.
I ran the burning process: 1.) with Zip Drive unplugged from shared cable, SuperDrive still set to master. 2.) with Zip drive connected and set to slave, SuperDrive still as master.
Same burning problem with Toast 7.1.2 as well as the older 6.0 version.
I managed to however burn a CD-R of data in both Toast versions, and disc burning appears to be supported in the iTunes burning preferences.
What else. The drive is listed in Toast as DVD-RAM. And apparently tech support has told me this is an LG 18x SuperDrive, and I was instructed to load the driver from the install disc for 20x SuperDrive. The driver froom the 18x install disc (the obvious one I thought, since it is an 18x burner), did not enable burning according to System Profiler and iTunes. I used PatchBurn 3 to create a driver successfully, but had the same burning problem.
I'd rather find some answers here, than have to call MCE support in Irvine California and use up minutes on my cell!!!
Please, help. I'm sure I can send the drive back to macmall.com. Can anyone recommend a SuperDrive that will actually work in my G4 Dual 450?
Thank You!!
marc

Today I bought that very same model LG - branded, black front from a local PC retailer. It was cheap, bulk without any package or cables,in fact it was only 5 Euros more than a CDRW...
Apple System Profiler says : DVD-RAM GSA-H55N, vendor Aopen/LG, atapi , firmware id : 1.03 , internal disk id : 0.
I have a copy of Toast Titanium 6.05 -> upgraded for free at Roxios website to 6.1.1 and succes - I have burned a 550 MB CD-R with Toast under my beloved Jaguar OS 10.2.8 at full speed settings in virtualy no time ;.)
I am bidding on ebay right now for a copy of Apples ilife (2003) which contains idvd3, the only version which will run on my specs.( idvd4 is some 700Mhz minimum ) . I will try tomorrow how about patchburn in the Jaguar edition will make this drive compatible with Finder's or itunes burn buttons.
Anyway, Toast 6 seems to be able to do the job, and it can make DVDs and Video-/ Picture and what not else CDs too. I did not doctor with the speeds settings, I left all to "best possible" and it burnt in very little time a disc I can read on my Tiger Mac too.
The G4 PCI tower ( 1999 - 2000 ) is built on around the same mainboard as the blue/white G3, it has internal 100 MhZ IDE-bus, so it works even this old and I would expect any G3 tower wo also support that combination of Software/OS/Burn Apps. Those old machines can do wonders, let alone you need the Software from back when it was "High-End". - Of course I could put Tiger and ilife 06 on it, but then it would get ridiculous slow and unproductive.
Just my few first opinions with the all new Burner in the oh so old machine

Sharing DVD-ROM with windows computers ?

altought i'm very experienced with linux, i'm rather new to mac os, so if this question sounds dumb, accept my early apologies.
thing is, some time ago, i was trying to copy some printer drivers from a CD to a windows box that didn't have a working cd-rom reader. at first i tried to share my ibook's dvd drive with the windows box, but couldn't find a way to do that from the GUI. since samba is nothing new to me, i edited samba's smb.conf file and added the share manually. after i restarted samba, the windows box could see the share, list the cd's folders but it couldn't open any file nor run executables.
all windows said was that i didn't have permission to do so.
i ended up sharing the C: drive on the windows machine and mounted it on mac os to push the files to a temp folder on the wondows side.
i found and old thread here (from 2000 IIRC) about a shareware that could share folders other than my own home folder, but i don't want to use it, i rather edit smb.conf manually. i'd like to know if there's anything alse besides adding the share in smb.conf that'll allow windows to access the files on my DVD unit.

ok here is the problem the mount points of volumes on Mac OSX differs from linux,
In linux volumes are mounted in /mnt
however on the mac the reside in /dev for example my dvd drive on my imac is
/dev/disk1s1
but the only way to browse the volume is using is pathname /Volumes/dvdname
where dvdname is that actual name of the disk.
So I can easily setup a samba sharepoint on my using the /Volumes path e.g add the following to /etc/smb.conf
[dvd]
comment = dvd drive on macintosh
writable = no
path = /Volumes/dvdname
The problem is that whenever you change your dvd roms you have to change the path to the /Volumes/ each time.
Sharepoints would be quick way of doing this.
I have tried using path = /dev/disk1s1
but I get an error I will keep digging and if you google around as well maybe we can find a good solution.

Saving photos to DVD ROM with iMovie

If I create a slide show with iDVD, I can set up an option (in preferences) to "always save slide show photos to DVD ROM". With this option selected, when I write a DVD, the photos are writen to a directory along with creation of VIDEO_TS files etc.
I like this option, since it gives me a way of storing the JPEG along with the same slide Show DVD. So at a later date if I want a single JPEG, I can get it from the same DVD as the slide show.
I want to use iMovie to create a slide show, since I want to put animated titles, various transitions between slides, and Ken Burns effect etc. But if I create an iMovie, is there a way to store the JPEG to the same DVD in a directory? I do not see any option, I am willing to take the iMovie to iDVD to get it done, even with this, I do not know how to save the JPEG to the same DVD-ROM.
Can some one help me with this.
Thanks,

there's no single-click option, but you have an option...
in iPhoto, create an album with your pics (we need that later in iM...)
"export"/share this album to a new folder on your harddrive (don't forget where...)
create your iM project, using that album
when finished, create new iDVD project, use your iM project...
when finished, in "expert" (<< english nomenclatura? the menu option between Project and Windows...) you can choose "dvd rom content"
in that dialog, choose your exported folder with pics to add it as pic.files ...
done.

Poblems with dvd rom on 865pe

Similar Messages

Maybe you are looking for