POC Run after the Project Cut Over migration

Hello Experts,
Is it mandatory to run POC after Migration of Projects into SAP. We are taking over the legacy projects data to sap on 15th of this month and we want to run POC on the month end say 31st of march.
i want to know wether we have to run POC immediatly after the project migration or not?
Best Regards,
Ravi

Hi Ravi,
It is certainly advisable to execute POC run after Project Cut over migration.  The calculated values should be same as before migration.  This is confirm that the migration is successful.  Executing POC on 31st will include values before migration and after migration and will make it difficult to reconcile the numbers.
Regards
Jayesh

Similar Messages

  • Moving to Exchange Online from SBS 2003/Exchange 2003 using PST files instead of cut over migration?

    I have a friend who runs a small company with approximately 10 users.  They are currently using Small Business Server 2003 and are using Exchange 2003 to a limited degree.  They are using POP accounts with a hosting company for external email and
    are using Exchange for internal email and calendar sharing.  They have several different versions of Outlook including 2003, 2007, and 2010. Most of the users have two mail accounts configured in Outlook - one Exchange account and one account with a hosting
    company which provides POP mail boxes.  Their MX record currently points to the hosting company not their exchange server.  As far as I know, they do not have any static IP addresses or if they do, they are not using them.
    I do not believe Outlook versions about 2010 will work with Exchange 2003 and their server is getting older and probably needs an upgrade.
    I think they should probably move to Exchange Online since they do not have an IT person on staff.
    I've done some research and it looks like the recommended solution is a cut-over migration from Exchange 2003 but it looks like that would require some changes to the existing SBS 2003 / Exchange 2003 server and I'm not sure that we would be comfortable
    making those changes.
    Would it be possible to sign-up and create the user accounts using Exchange Online and just import the data from the user's PST files?
    I tried doing some research it looks like it is possible but one post mentioned needing to modify the mailbox’s legencyDN or they may not be able to reply to old messages.  How difficult is that?  Can it be done after the messages have been migrated
    to Exchange Online.
    They only have about 10 users so we are looking for the simplest way to move to Exchange Online, not necessarily the fastest or most efficient.
    Any advice would be greatly appreciated.

    Hi,
    Based on your description, I understand that you want to migrate Exchange 2003 Public Folders to Exchange Online. We can get following messages from this article:
    Public Folders in Exchange Online
    You can’t migrate public folders directly from Exchange 2003. If you’re running Exchange 2003 in your organization,
    you must move all public folder databases and replicas to Exchange 2007 SP3 RU10 or later. No public folder replicas can remain on Exchange 2003.
    It seems that can’t migrate on-premise Exchange 2003 public folders to an Office 365.
    àOn the client
    side we are using Exchange 2007
    Did you mean Outlook 2007? Please refer to the following thread and check if can help you.
    Migrating Exchange 2003 Public Folders to
    Wave 15 Office 365
    Hope this helps.
    Best regards,
    Justin Gu

  • Unlocking my iPhone after the contract is over

    I purchased my iPhone 18 months ago and my contract with O2 is running out. I am moving for a ob to different country that also have iPhones and I was wondering whether it is possible to LEGALLY unlock my iPhone after the contract it over so I can use it with other operator in other country. Any details, like procedure, prices and everything would be apprecieated.

    Not sure if you can. It's down to the carrier in your country as to whether they feel like it or not.
    [This list|http://support.apple.com/kb/HT1937] will give you more details.

  • I just downloaded a video in HD, but I found out after the download was over my computer doesn't play HD videos. Is there any way I can return the video and get the SD version, or upgrade my computer so it will play the HD video?

    I just downloaded a video in HD, but I found out after the download was over my computer doesn't play HD videos. Is there any way I can return the video and get the SD version, or upgrade my computer so it will play the HD video?

    From http://support.apple.com/kb/HT3209
    When you purchase an HD video on a supported device or computer, only HD video will be downloaded. To download the SD version, you need to download the video again from your Purchased page. Conversely, if you purchase an HD video on an unsupported device, the SD version will be downloaded. Then, you will need to download the HD version from your Purchased page. Learn more about downloading previous purchases.

  • AE CS6 won't run after the Mavericks 10.9.3 update

    My AE CS6 won't run after the Mavericks 10.9.3 update the other day. I was prompted that the current version of my AE was 11.0, so I searched and found the seemingly most up-to-date here: Adobe - After Effects : For Macintosh : Adobe After Effects CS6 11.0.4 Update : Thank You
    My question is this: since I'm new to Mac, should I download the update and install it to my existing instance of AE and it will allow AE CS6 to run as normal? And the way to install the update is simply to double-click the .dmg?
    Thanks!

    Instructions for installing the update are on the download page here:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5696

  • The attached VI works when I run it initially creating the XML file, but when run after the XML file is created, it's not updated. What am I doing wrong?

    The attached VI works when I run it initially creating the XML file, but when I change data and run after the XML file is created, it's not updated with new data. What am I doing wrong?
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    Attractive Force XML.vi ‏23 KB

    That looks like the logic which was written into the VI
    Inner true/ false case:
    (file exists : false) write to XML file, unflatten for display
    (file exists : true) read from XML file, unflatten for display
    At no time when the file exists (true case) is the XML file updated...

  • I found a remote service running after the 10.10.3 update. ps -A|grep remote.  And I had remote management turned off in prefs.

    I found a remote service running after the 10.10.3 update.
    ps -A|grep remote. 
    And I had remote management turned off in prefs.
    I force quit the process with activity monitor.
    This looks as if it could be a problem.

    Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
    The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
    Its a shame you have to go through what you going through.
    Good Luck

  • My calendar events are dropped after the month is over.  How can I stop that from happening?

    My calendar events are dropped after the month is over.  How can I prevent this from happening?

    Settings > Mail, Contacts, Calendars > [scroll way down to the Calendars section] Sync = "All events"

  • Aspect Ratio changes after the project was reopend

    hello everyone,
    I have a project with mov-files with apect ratio 1,0, I wanted to change them to 1,33, so I went to interpret footage and change it to 1,33. Then I synchronized the mov-files with audio and made merged clips (all in 1,33). After that I saved the project and open it again and then the original mov-files are back to 1,0, the merged clips are in 1,33, but with a 1,0 footage (so the clips have black bars left and right). Does someone know what could be the problem? Am I doing something wrong so the footage won`t stay in new aspect ratio?

    Did you check the box?: Re: Premiere Pro CC - interpreted footage reverts to original framerate

  • Lightroom free trial, after the trial is over.

    I am in the free trial mode, wondering what will happen to the pics I used with lightroom and saved in my pc, after the free trial is over.

    The images will be were you put them. If you export them they will include any edits that you applied in Lightroom. Even the catalog will be available for reuse when you purchase Lightroom.

  • Can a thread created in an applet still run after the browser is closed?

    Dear all,
    I was able to make an applet's thread keep running even the web page changed to other page. Is it possible to make a thread spawned by an applet keep running even if the browser is close? I am using signed applet and JRE1.3.1_02. Thank for answer.
    [email protected]
    Arthur Pan

    No. A thread is part of a process and if the browser closes that process will (generally) be destroyed.

  • IMovie is repeating clips after the timeline is over! HELP!!

    I have a 40 minute iMovie project. At the end of the 40 minutes, imovie continues, past the end of the timeline, and is repeating video from earlier in the project(about 10 minutes earlier) without any audio, as I extracted the audio to make way for a soundtrack. I tried putting in a blank clip, as well as deleting all of my chapter markers, but it's still doing that. How do I stop it? This is important, as this project is making me $600, and I need to correct it quickly!

    Tried quitting iMovie and restarting to see if it still does that?
    Sometimes iMovie plays sections of video and/or audio from a memory cache, to avoid a slowdown involved in reading from the hard disc.
    It's just possible that it's playing back material in its memory, as well as what's in your Timeline.
    It's also possible that if you've moved around your extracted audio clip(s), you may have something (..audio and/or video..) positioned way beyond where you think your Timeline ends. Have you used the scrollbar at the bottom to scroll all the way, as far as humanly possible, to the extreme right, to see if there's nothing lurking there? ..And do that with 'Zoom' set to its lowest value, so that you really are scrolling to the very end of the movie.
    I've had this kind of trouble in early versions of iMovie 4, but never had it yet in iMovie (5) HD.

  • Not stable Run of the project in Jdev 9.0.3.2 (c embedded OC4J 9.0.4)

    Hello, All!
    I use JDeveloper 9.0.3.2 and embedded OC4J 9.0.4.
    But frequently, at Run project, embedded OC4J (9.0.4) startup occurs to a mistake:
    Target URL -- http://192.168.1.104:8989/Log/index.html
    Copying default deployment descriptor from archive at C:\Work\PS_FRAMEWORK\classes/META-INF/orion-ejb-jar.xml to deployment directory C:\jdev9032_2_oc4j904\jdev\system9.0.3.2.1145\oc4j-config\application-deployments\current-workspace-app\classes...
    Auto-deploying file:/C:/Work/PS_FRAMEWORK/classes/ (No previous deployment found)... done.
    Auto-deploying PS-tests (New server version detected)...
    Auto-deploying PS-tests (New server version detected)...
    Error initializing server: Error loading web-app 'Log' at C:\Work\PS_FRAMEWORK\web\framework: Error writing orion-descriptor: C:\jdev9032_2_oc4j904\jdev\system9.0.3.2.1145\oc4j-config\application-deployments\current-workspace-app\Log\orion-web.xml
    Process exited with exit code 1.
    Repeating it a few times, it is possible in a result to receive required, i.e.
    Oracle9iAS (9.0.4.0.0) Containers for J2EE initialized.
    Whether somebody met something similar and how it to correct?
    Thanks
    Alexandre.

    You might find the sample code which is part of OC4J-howto's useful.
    http://otn.oracle.com/tech/java/oc4j/904/index.html
    http://otn.oracle.com/tech/java/oc4j/904/how_to/how-to-ejb-mdb.zip
    raghu
    JDev Team

  • My Mac pro 2008, not running after the Apple logo, i rebooting and i rebooting

    My Mac Pro 2008 no boot afther the Logo Apple, reboot, reboot and reboot only, and in XP, the graphic is pertubed with bad graphics ... the mémory it's good, and i thinks my card graphic is out. SRY for my english, it's not my language. Help my please, my apple care is finished 10/2011, and i will repared itself. Many thanks. Alain Muno

    Not saying this IS your problem, but … I just went through avery similar problem with Mac Pro3,1. Here is my story.
    On boot of any Mac OP system drive, internal or externalHDD, (Lion or Snow Leopard), original Mac Pro install CD, Snow Leopard CD,nothing.  (Would only go to gray screen,apple logo, spinning gear that would stop spinning after about a minute.)  But, it would boot on XP drive.  However, in XP, on Windows black startupscreen, had alternating columns of two different patters of blue dots and XPgraphics were not as they should be (larger icons on desk top, slow response,different size of desk top (maybe 600x400 when it should have been1024x768).  Supplied hardware test showedno failures.  Took it to shop.  Their better diagnostics showed nofailures.  All peripherals (my drives, myCDs, etc, disconnected.  (NOTE: they didnot try a new video card since they did not have one.)  Still would not start even using their drives(external or internal).  Shop tried a newlogic board.  That did not work and theyput the original one back in.  Shop saidall they could come up with was new processors. This was not a cost effective option and they had none to try.
    After thinking about it more, I figured it could be thevideo card: the original 8800 GT that came with the Mac: that it was so bad itwould not start in Mac OS but would limp along in XP.  I was all set to buy another vid card one-bay just to try.  While doing thatresearch, came across several articles on the Internet that discussed vid cardfailure due to micro-cracks in some solder joints.  These develop due to age/heat cycles.  The proposed fix was to ‘reflow’ the solder.  Figured it was worth a try before spendingthe money on a new vid card.  Found thesedetailed instructions on youtube.  http://www.youtube.com/watch?v=T7um_hZYom4  I followed the procedure, put the vid cardback in, and now it works just fine.
    I did not and would not do this until I had ruled outeverything else.  But, it has worked forothers and it did work for me.

  • I have ipod 4 touch. 3yrs old. when i plug in it isnt charging. it gets switched off after the charge gets over. then it charges and again switches on. dont know how to solve this problem.. please help

    IPod 4 touch. 3yrs old. Not charging when plugged in. But charges when the battery gets drained. when battery gets over I keep it for charging. It switches on and doesn't charge.. Plz help!!;;

    Not Charge
    - See:     
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

Maybe you are looking for