Pocket Mac for Blackberry Problems

I have downloaded the most current software, and the drivers, but the sync stops midway through the sync - it used to work, but will not anymore.
What's up? 
Solved!
Go to Solution.

Hi and welcome to the forums!
Wish I had an answer for you, but I do have a suggestion.
Try resolving this thread and post in the Blackberry's for MAC forum.
There is much more specific information available there, and I'm sure
you'll get some help from the other MAC users there.
Thanks,
Bifocals 
Please remember to resolve your thread.
Put the check mark in the green box that contained your answer! Thanks   
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

  • Pocket Mac for Blackberry Storm Will Not Launch

    As posted earlier by evabrazil, I have the same problem with the new MacBook.  I have installed PocketMac and downloaded the new drivers, but the application will not launch.
    Can anyone help?  Thanks

    Hello,
    Actually, I think that the battery is severely depleted...without a minimum charge, nothing will work.
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Can not sync my Blackberry 8830 with MacBook using Pocket Mac for BlackBerryto Entourage 2008

    I recently purchased a Verizon plan with my new BlackBerry 8830 Curve. I also downloaded pocketmac for blackberry with the Verizon technical support person. He spent almost 2 hours with me yesterday. We still can not sync my Blackberry contacts and calendar events to my mackbook on Entourage 2008.
    This is the message I get:
    [02:20:57.110] Could not lcoate the Microsoft Entourage Office Synchronization Tool.
    [02:21:01.076] Could not lcoate the Microsoft Entourage Office Synchronization Tool. 
    PS, they even typed in locate incorrectly.
    Can some help? I am stressed out that I only have one location where my contacts are located- the BB
    Thanks
    Henry

    Guess what ? Pocketmac for Blackberry just released a new version this afternoon. 4.125.
    I downloaded the new version and it now has a sync for Entourage 2008 and it works BB to Entourage 2008 and Entourage 2008 to BB.
    Thanks to them for finally fixing this major flaw

  • Pocket Mac and Blackberry 1 disappeared

    I am looking for help. 
    I have installed Pocket Mac and the drives Blackberry 1 and 2 were there. 
    Later I installed the Verizon drivers for the Motorola Q so I could connect my 9530 Storm to my Mac. 
    It works GREAT!
    But now, Blackberry 1 disappeared and I have no options to install applications on my Storm.
    Is there a fix for me using pocket Mac?
    I have the 9530 with the latest software and am running it on a MacBook Pro with OSX 10.5.6

    Hi and welcome to the forums!
    I have attached a reset procedure for PocketMac history.
    See if it clears your problem. You also might consider participating
    in the Blackberry's for Mac forum. I'm sure you can get some more
    specific information there.
    Thanks,
    Bifocals
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB10489&sliceId=2&docTy...
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Twitter for Blackberry problem.

    Hi guys, lately I've had problems with my Twitter for Blackberry app, the Interactions(@) tab woudn't work, it doesn't pop up if I press it. I tried soft resets, hard resets, reinstalling the app and even reloading my OS. I am using a 9800 with OS6 Bundle 2959, my Twitter version is 4.2.0.8. Does anyone know what's wrong here?

    Hello...
    Friend try installing an older version that twitter not all applications work well on devices ...
    I invite you to download the twitter via ota from your mobile enters this link
    http://www.blackberry.com/twitter
    Regards...
    Kudos **Do not forget to give those people who help and advise you regarding your questions, as well give the answer like**
    @ gutijose14
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

  • Pocket Mac for Storm issue

    I successfully installed the Pocketmac system and the driver update that was required for the Storm.
    The sync seems to be working (my iCal now has my Storm calendar tasks included and vice-versa)
    However, I can't seem to find where my contacts or my images are on my Mac when I have Pocketmac open .
    Can someone please help!??!?!?

    Hi and welcome to the forums!
    I have attached a reset procedure for PocketMac history.
    See if it clears your problem. You also might consider participating
    in the Blackberry's for Mac forum. I'm sure you can get some more
    specific information there.
    Thanks,
    Bifocals
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB10489&sliceId=2&docTy...
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • MAC WITH BLACKBERRY or MAC VRS BLACKBERRY?

    Utilizo un celular BLACKBERRY, Pearl 8100, pero NUNCA desde hace 4 meses que tengo el equipo he podido interconectarlo con la Imac para la bendita sincronizacion.
    Se debe de bajar un programa de RIM, lo he bajado y cuando lo abro me sale una leyenda la cual dice: No se han podido montar las siguientes imagenes de disco:
    Imagen Razon
    Pocket MAC for Blackberry No reconocido
    Adicionalmente si conecto via cable en cualquiera de los puertos USB de mi computadora me dice que no son puertos USB 2.0
    Alguno de Ustedes puede ayudarme?
    <Email address removed by Host to protect your privacy>
    Saludos

    iSync doesn't sync with Blackberry devices. There are two syncing solutions available for Blackberry, neither of which is made by Apple.
    You need to determine which one you are using, and then contact the relevant developer for assistance.
    • BlackBerry for Mac
    • Missing Sync for BlackBerry

  • BB Curve, Pocket Mac, Mac Book Pro sync issues, all of a sudden

    Hi, new to the forum here, but not to Blackberry or Mac! I've been using this sync combo since it's inception back when I first got a 7100, then with my T-Mobile Curve when it came out, with little or no problems. I now, all of a sudden, have issues! I did look around at some other posts to see if I could find a solution, or someone with the same problem, but I think my prob is slightly different, so forgive me if I'm repeating some things here that others already have talked about!
    After dropping my Curve over in Europe last month and cracking the screen (ugh), I got a replacement from the insurance company, which turned out to be a remanufactured phone (for the $130 deductible??? - another topic!).......  there were apps missing, and the phones'  keypad did not feel right, but IT DID sync ok... at any rate, I got them to send me a NEW phone, which I just received. It has the same exact software version as the other phones I had.
    I did my usual USB sync with Pocket Mac, starting just with the contacts (mac address book) and notes (stickies). I selected 'overwrite device' in the advanced prefs of pocket mac (all latest versions installed, with latest drivers as well).  Worked fine, as usual.
    I then added some addresses in my address book on the mac, and went to do another sync. It was at this point that the sync did not work, either in 'overwrite device' or 'two way sync'. The added addresses were not on my phone.
    What I've tried, and noticed so far:
    On the phone, during the 2nd sync, no matter which pref I choose, the ARROW on the connection status window on the phone is going the WRONG WAY, towards the computer icon, not the phone icon. Since I added info only on the computer, the arrow should be going toward the phone, especially when in 'overwrite device' pref. This was NOT the case on the original sync, when the phones' address book was empty; the arrow was going the right way, towards the phone. I did the 'wipe/reset' that Brodie suggested in another post, which is going to the address book on the phone->menu->options->scroll to 'default' and type in 'rset'... that wiped the address book from the phone.
    I then did another sync, pref in 'overwrite device' and again it worked fine, with all my addresses, including the recent entries, transferred as they should be to my Curve...
    I again made a few changes as a test, adding one address on the phone, and one in the address book on the mac, did a 'two way' sync, and again, nothing, both new entries were NOT copied. 
    The other thing I noticed, is the connections status window goes away after a bit of time on the phone (like it's finished), but the pocket mac software on the Mac is still spinning, acting like it's still syncing, with the status bar near the end, but it never finishes. I have to quit it manually. This did not happen on the 'clean' sync, everything finished like it was supposed to.
    This obviously is a drag to not be able to sync without wiping the phones' address book, especially when data has been entered on the phone, and in fact, in that case, there is NO WAY to get it to the computer at this point! 
    I'm running MAC OS 10.4.11. Brand new sync cable that came in the box with the new phone.
    As I said, all software and drivers having to do with pocket mac and blackberry are the latest versions just installed.
    Maybe the desktop mngr for mac will solve all this, but, until then? 
    Thanks in advance for any help!

    Hi and welcome to the forums!
    KB10489 Data synchronizes from the BlackBerry device to the Macintosh computer, but not the other way.
    See if this offers any help
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • I'm having a problem sending a word doc via email. I have Mac for Office 08, when I save the document as a .doc or .docx, and send it to someone, they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon. How do I fix?

    I'm having a problem sending a word doc via email. I have Mac for Office 08, and I'm using Mavericks OS. When I save the document as a .doc or .docx, and send it to someone, (doesn't matter if its safari, chrome or firefox or on my yahoo or gmail accounts) they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon and I can read it. How do I fix?

    I suggest you post on the Microsoft Mac forums since it's their software you're having issues with.
    http://answers.microsoft.com/en-us/mac

  • Problem with Yahoo Messenger for Blackberry 10

    Hi Blackberry Team,
    I've recently encountered a problem with Yahoo Messenger 10.1.0.88 on my Blackberry Q10 running OS 10.1.0.4181 software. It had been working fine for like a month after I purchased this phone from the authorized shop in Thailand until a few days ago it started showing the message within seconds after signed-in: 'Your connectino to the instant messaging provider has been lost. You can wait for the connection to be re-established or close the application and try logging in later'.
    This is only when I'm on 3G cellular network. It works fine through Wi-Fi connection. 
    I did some research on website and found that the latest version of Yahoo Messenger for Blackberry is actually 10.1.1.16 released on Sep 30th, 2013 but, for some unknown reasons, my Blackberry World only shows the '10.1.0.88' (which already installed on my phone) as the latest version. 
    I really need this for work as I'm communicating with international bankers over yahoo. Please help look into this problem and get it fixed at your earliest possible. Thank you.

    I have the same problem with my z10 always unknown error it getting me crazy

  • I can't get any contact info for installation problem- I just bought a Mac Air and my CS5 is asking for a reinstall. Mac Air has no DVD slots. HELP I al VERY FRUSTRATED THAT ADOBE HAS NO WAY TO GET HELP

    I can't get any contact info for installation problem- I just bought a Mac Air and my CS5 is asking for a reinstall. Mac Air has no DVD slots. HELP I al VERY FRUSTRATED THAT ADOBE HAS NO WAY TO GET HELP

    You are right, Adobe does not support CS5 because it is no longer sold.
    Simply download the trial version of CS5 from this Adobe web site and input your serial number.
    Adobe - Photoshop : For Macintosh

  • I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one ye

    I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one year. Then, I decided to change it to another computer, so I sisintalled it according to instructions. In the meantime I got a free trial of creative cloud on that computer, but I gave up and decided to reinstall my cd-roms. However, everytime I try to use acrobat for instance it says that my trial period ran out! I disinstalled my cloud products, I am using my registered full master series items, they have nothing whatsoever to do with my creative cloud FREE subscription. If I try to cancel my free membership, it is to no avail, there simply is no such possiblity. I want to use the software I paid dearly for, not the cloud items I disinstalled and which do not interest me. How can I contact Adobe to fix it? It was no fault of mine, I did all I was supposed to, disintalling items before installing the right ones, but the system must have some error i am not responsible for.

    open an app and click help>activate.
    if you try to open an app and see a 'your trial has expired" window, click license this software and enter your serial number.
    if you can't do either, run the cleaner and make sure cc is cleaned from your computer, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Iv'e had my mac for 2 weeks & now have a problem with safari since I changed to a wireless super hub.  It will not open a web site I use my iPad & windows lap top will.  Apple support say it's the DNS settings cable say there okay please can anyone help

    Iv'e had my mac for 2 weeks safari was working great until I changed to a wire less super hub.  Safari will not let me open & log into a web site I go on a lot.  My ipad & windows lap top will on the same network.  Apple have said it's the DNS setting my cable provider say it's not it's a problem with my mac.  Iv'e phoned apple lots of times same with cable provider Iv'e tried a few things it has not helped solve the problem.  I'm now advised to return my mac to the shop for a check.  Has anyone else had this problem I would appreciate any help because I'm going round in circles.

    Adding a couple of DNS numbers sometimes helps:
    System Preferences>Network, select your wifi or ethernet network on the left and click on the 'advanced' button and then the DNS tab. On the left side of the window make a note of any DNS numbers listed so that you can re-instate them if necessary and then click on the '+" button bottom left of the window. Type 8.8.8.8 and click the + again and type 8.8.4.4 save the settings and try the website again.
    BTW, I have the same problem with Firefox not letting me input my password in secure sites. I did find a workround in the network settings in Firefpx prefs, but it didn't stick so I reverted to using Chrome as alternative browser. No problems with that so long as you don't mind Google looking over your shoulder

  • I have never used my mac for desktop publishing before and am having some problems.  This sounds really dumb, but I can't figure out how to put a border around a text box.  Also, how do you edit the border, i.e. border color, thickness, etc. Help!

    I have never used my mac for desktop publishing before and am running into some real problems.  How do you put a border around a text box?  Can you edit the border - color, thickness, etc.?  Help!

    I think the best solution is to read Pages documentation, go to Help and you have a long list of options. Pages is capable of quite sophisticated things, some features are above Nisus or Mellel, so it is not so simple to summarize things in a few lines.

Maybe you are looking for

  • Wrong exchange rates entered and documents posted need to be updated

    Hi Friends, We have a situation where wrong exchange rates were entered at the end of month and lots of documents were posted with the wrong exchange rates. All these documents need to be updated with the correct exchange rate. But system will not al

  • Oracle eBusiness R12 wont install on Windows 2003

    I have been trying for 3 days to install the current (downloaded from Oracle Monday 18th Jan 2010) eBusiness suite on Windows 2003 with no success. The installation always fails on Step 3 of 5 - Registering Applications Technology Stack with error RW

  • Query with variables

    I am using the syntax below in the query generator as part of a larger query.  It works fine, however, when the user prompt appears, both customer and vendors show up in the selection list. /* SELECT FROM [WSB_LIVE].[dbo].[OCRD] T30 */ DECLARE @BPNam

  • Flash Player not working since update

    I recently updated my Flash player and since then I only see a black box when something tries to play.  No error message or anything- just a black box.  I am running windows xp with mozilla firefox 3.6.8.  Any ideas?  I have tried uninstalling and re

  • LibreOffice 4.2.2 (and 4.1.5) help doesn't show various images

    Have upgraded to the libreoffice-xxxx-4.2.2-1-x86_64 packages, and found that various images in Help are missing, showing just a box with the text 'vnd.sun.st' (or is it 'wnd.sun.st' - poor definition) within. For example, look in the Index for Forma