Pocket PC DAQ operation Error 15

I got an Error 15 as I run the example code of LV 7.1 for Pocket PC for DAQ. All of the example code run with that Error. But I've once downloaded the executable MultiChannel AI, it works fine. But as there is no source code comes with that executable, I couldn't check what's wrong. Any idea ?
More info, I got the following Software and Hardware:
Software:
LV7.1 for Pocket PC
NI-DAQmx Base 1.0
OS: Pocket PC 2003 (English)
Hardware:
DAQ-Card 6062E
HP iPAQ H5550
Dual Expansion slot for PC Card

Hi,
So it seems like version 1.3 is only available for USB devices. So, are you still getting that error? The AI specs are:
Finite acquisitions using a single "retrieve the entire scan" setup will run pretty much at the fastest rate of the card (so for a 6024E, we're talking 200kS/s).
Continuous acquisitions, dragging out of application memory in chunks, use the cpu too much to acheive full rate. Estimate 4KS/s maximum regardless of the hardware.
Are you able to run any of the examples and get them to work through the daq card. I would use all of the default values and see if you can get any data.

Similar Messages

Getting " Not enough memory for the operation error " in BOE

Hi,
We are using BOE 11.0.
we try to schedule a new report with multiple database logins for testing in BOE. When we run the report we are getting error like "Not enough memory for the operation error"
The same report has been executed successfully when we run using Crystal reports developer. The report is fectching less than 10K records from all the databases together.
Please let me know which is causing the issue and also let me know is there any limit in the number of databases connecting for a single report.
many thanks in advance for all your help.
Cheers,
Suri ;-)

Hi Sarthan,
Sorry. I'm new to BOE. We know only scheduling the reports creating folders etc. :-)
I've seen one parameter "Maximum Cache Size Allowed (KBytes)" and the value for this parameter is 5000.
If we change it to a big number whether we can solve the issue ? Please suggest.
Cheers,
Suri ;-)

"You do not have enough access privileges for this operation" error message on iTunes startup?

So I cleaned up my Macbook recently, and now I am fearing that I may have deleted something important.
Whenever I start up iTunes, I am met with the "You do not have enough access privileges for this operation" error message. I have read forums that advised editing the Get Info page for the iTunes library to allow all users and staff to "Read/Write", but doing this has not eliminated this message.
Any tracks that were not purchased play normally, but purchased tracks now require additional sign-in that I do not believe was required before. Other than this, iTunes performs normally.
Did I mess something up permanentliy or is there a way to fix this?

The problem was that my account wasn't authorized. But when I tried to authorize it, I got an error message saying that the authorization could not be completed. Thankfully, THAT was something that Apple Support had previously addressed.
See http://support.apple.com/kb/ts1277
Thanks, Apple.

Operations error occured when executing LDAP query to read members of AD group in windows 8 operating system using javascript and active-x

My code javascript script is
objConnection = new ActiveXObject("ADODB.Connection");
objConnection.Provider="ADsDSOObject";
objConnection.Open("ADs Provider");
objCommand = new ActiveXObject("ADODB.Command");
objCommand.ActiveConnection = objConnection;
objCommand.CommandText = "SELECT sAMAccountName,displayName, givenName, SN,CN, mail,distinguishedName,primaryGroupToken,member,ADsPath,MemberOf FROM 'LDAP://"+GrpDomain+".corp.com' WHERE objectCategory='group'
and objectClass='group' and sAMAccountName='"+GrpName+"'";
objRecordSet = objCommand.Execute();
This code executes successfully on window 2008 server machine,
but gives "Operations error occurred" on windows 8 operating system
on line of code highlighted above

Hi,
In regard to scripts related issue, I suggest you refer to The Official Scripting Guys Forum to get professional support:
The Official Scripting Guys Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Thank you for your understanding and support.
Best Regards,
Amy Wang

Trying to install Square to accept credit cards and get KQHTTP Operation Error Error Domain error 442 What is this?

Trying to install Square to accept credit cards on my ipad. I get the following message. KQHTTP Operation Error Domain error 422. What is this?

I am having same problem. Did you find a solution?

Unable to complete this operation error

Hi,
I installed Firefox 4 and when I go to my HP printer properties and click on Printer Services I get "Unable to complete this Operation" error. If I uninstall Firefox it works fine. When I reinstall Firefox I get the same error. Any help would be appreciated because I would like to use Firefox.
Thanks,
Phil

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

BATCH-FTP-EWAY-OPERATION-ERROR

Hi all,
I get an error running my JCAPS application using an BatchFTP adapter. With the message subject BATCH-FTP-EWAY-OPERATION-ERROR.
The message is the following:
Message: Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].
The error message is:
<?xml version="1.0" encoding="UTF-8"?>
<Alert xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation=".\Alert.xsd">
<Id>0</Id>
<Type>Alert</Type>
<SeverityCode>2</SeverityCode>
<Severity>MAJOR</Severity>
<MessageCode>BATCH-FTP-EWAY-OPERATION-ERROR</MessageCode>
<Message>BATCH-FTP-EWAY-OPERATION-ERROR</Message>
<MessageDetails><![CDATA[Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].]]></MessageDetails>
<OperationalStateCode>7</OperationalStateCode>
<OperationalState></OperationalState>
<ObservationalStateCode>0</ObservationalStateCode>
<ObservationalState>UNOBSERVED</ObservationalState>
<ListenersNotified>0</ListenersNotified>
<PhysicalHostName>jcapsdr:19048</PhysicalHostName>
<EnvironmentName>BH_PROD</EnvironmentName>
<LogicalHostName>AD</LogicalHostName>
<ServerType>INTEGRATION</ServerType>
<ServerName>server</ServerName>
<ComponentType>EWAY</ComponentType>
<ComponentProjectPathName>prjBHToSATO</ComponentProjectPathName>
<ComponentName>BatchFTP2</ComponentName>
<TimeStamp>Tue Sep 06 11:16:23 EST 2011</TimeStamp>
</Alert>
What can be the problem?
Thanks for your help.
Cheers,
Andrew

If the File size is larger, then we encounter this exception.
Remedy: Restart of the service may solve
or split the file size and place them.

Why do I receive Offending Operator Error when opening illustrator created charts??

I have created a pie chart in illustrator and after I save and close I receive Offending Operator errors when reopening and my chart information is gone. This has happened to me twice between a six month period. I thought it was just corupt files, but sure enough I am having the same issue when trying to create again.
Can anyone offer suggestions as to what i am doing wrong?

Check your firewall, because some firewalls monitor secure connections (https) and send their own certificate instead of the website's certificate.
http://kb.mozillazine.org/Firewalls
otherwise see if this happen in a new profile :
http://kb.mozillazine.org/Profile_Manager
thank you

'Runtime Operation Error' on BPM/Workspace

Hi all,
When I'm logging into the BPM 11 G Work space I'm getting a error indicating *" Runtime Operation Error''* .
This error occurs only for my login. Other users not getting this and their logins are working properly...
What can be the issue?
Thank You..

Check the server log for the name of the of the task or process that this happens. Then in the soa dehydration store, check the status of this process via the query. select processId, processName, compositeName, revision, status from dev_soainfra.BPM_CUBE_PROCESS;
for the process set the status='-1'.
Restart the soa server and try again.
Hope this helps..cheers!

Runtime Operation Error in Workspace

Assigned users(jcooper) unable to see the list of deployed application assigned to him in the workspace. "Runtime Operation Error" is displayed when the workspace loads. Any reasons for the same? and how do we fix this?

user12963822,
What do you see in the weblogic console window when you try to login? What happens when other users login to the workspace?
Since a deployed application is not the thing that is assigned to a user, do you mean that there is an Initiate task in the swimlane to which jcooper is assigned that role?
Can you login to workspace as weblogic? If so, check the Roles assignments to make sure they are set correctly. This doesn't always come over during deployment the way you expect.
If you can't login to workspace at all, for any user, there is something more fundamental going wrong. What error messages do you see in the weblogic console window?
Heidi.

Error re-trying Stalled Operation Error

Hi,
We have a solution that uses Workspace and assigns tasks to users/queues. Sometimes we get stalled operation errors and we re-try them after fixing whatever may have been wrong in our solution. We currently have one stalled operation error that does not re-try successfully.
We instead get the below error from adminui:
When looking at the error in the server log, this is the error we get:
ERROR [com.adobe.idp.jobmanager.execution.workadapter.JobStoreAdapter] (http-0.0.0.0-8080-1) Job not found for job id f05f87640a8b04077cc5f27ad1a1e817
Does anyone have an idea what may cause this kind of an error? Your input will be much appreciated.
Thanks,
Enock

There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
and here
http://forums.appleinsider.com/archive/index.php/t-8096.html
My opinion is that partitions cam be useful when:
1. the OS can't manage big volumes (as it was in the past)
2. the OS can't optimize the space on big volumes
3. want to install 2 or more separate OSes
4. organization (like in your case).
Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
Thanks for the beer!
cheers
rob

Cannot load large CSV files in SignalExpress("Not enough memory to complete this operation" error)

Hi guys,
I'm new here and just have browsed
some of the related topics here regarding my problem but could not seem
to find anything to help me fix this problem so I decided to post this.
I currently have a saved waveform from an oscilloscope that is quite
big in size(around 700MB, CSV file format) and I want to view this on
my PC using SignalExpress. Unfortunately when I try to load the file
using "Load/Save Signals -> Load From ASCII", I always get the "Not
enough memory to complete this operation" error. How can we view and
analyze large waveform files in SignalExpress? Is there a workaround on
this?
Thanks,
Louie
P.S.>I'm very new to Signal Express and haven't modified any settings on it.

Hi Louie,
Are you encountering a read-only message when you tried to save the boot.ini file? If so, you can try this method: right-click on My Computer >> Select "Properties", and go to the "Advanced" tab. Select "Settings", and on the next screen, there is a button called Edit. If you click on Edit you should be able to modify the "/3GB" tag in boot.ini. Are you able to change it in this manner? After reboot, you can reload the file to see if it helps.
To open a file in SignalExpress, a contiguous chunk of memory is required. If SignalExpress cannot find a contiguous memory chunk that is large enough to hold this file, then an error will be generated. This can happen when fragmentation occurs in memory, and fragmentation (memory management) is managed by Windows, so unfortunately this is a limitation that we have.
As an alternative, have you looked at NI DIAdem before? It is a software tool that allows users to manage and analyze large volumes of data, and has some unique memory management method that lets it open and work on large amounts of data. There is an evaluation version which is available for download; you can try it out and see if it is suitable for your application.
Best regards,
Victor
NI ASEAN
Attachments:
Clipboard01.jpg ‏181 KB

Unsafe Operation error/Local preview

Hello,
I am using a Flash extension (Slideshow Pro) to put together
a slideshow. Just upgraded to CS3 from StudioMX 2004. I'm using the
newest version of the extension to create new SWF files but getting
the "Flash has stopped a potentially unsafe operation" error when I
try to preview them locally in HTML.
I have been to the security setting manager several times,
allowed individual links as well as the directory I am working in,
they appear in the "allow" list as they should, however I still get
the same error (yes, I've re-published and re-started everything) I
understand that this error is related to older security settings,
but why am I getting it with newly-created files?
If it matters at all the image manager I am using is
Slideshow Pro Director, which resides in my root directory and
provides xml feeds for the slideshows.
Thanks in advance for helping an amateur out! Molly

Welcome to our community
You see this dialog because of Flash Player security. When you run your project from the local C drive, you are in very unsafe territory from the perspective of the Flash Player. Flash Player then blocks certain actions until you specifically configure it to say the folder where you are running the SWF is "Safe".
These restrictions aren't imposed if you place the content on a web server, as the web page is automatically in the "safe" zone. So once you upload to a web server, you have no concerns. Your end users will not see the message you are seeing.
There is more at the link below:
Click here to view
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

"CreateUser Failed" / error result (1); Operations error

Good afternoon,
I'm still having problems adding domains or users through the ida.
specs: (all NT 4)
Messaging server 5.1
Admin Server 4.2
Directory Server 4.13
When trying to create a user for an existing(working) domain, the error message that comes up through the ida is this:
Status: CreateUser
Failed:
netscape.ldap.LDAPException: error result (1); Operations error
[Continue]
At that moment, the following error comes up in the ldap access log. The full cut is below. Any ideas why it won't enter the a user into the ldap database?
[17/Nov/2004:12:51:45 -0800] conn=134 op=28 ADD dn="uid=testing,ou=people,o=our.domain,o=our.domain"
[17/Nov/2004:12:51:45 -0800] conn=134 op=28 RESULT err=1 tag=105 nentries=0 etime=0
This is what happens when using 'imadmin user create':
D:\iPlanet\Server5\ndacli\bin>imadmin user create
Enter login ID: [email protected]
Enter login domain: our.domain
Enter iDA server port: 8080
Enter login password: ****
Enter iDA server host name: chinook.our.domain
Enter user's login ID: testbob
Enter user's first name: testbob
Enter user's last name: test-bob
Enter user's password: test
[email protected]: create user failed:
error result (1); Operations error
D:\iPlanet\Server5\ndacli\bin>
Thanks in advance for any help.
-Josh
Full cut from access log:
[17/Nov/2004:12:51:45 -0800] conn=127 op=25 BIND dn="uid=ServiceAdmin,ou=People,o=our.domain,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=127 op=25 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=127 op=26 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=127 op=26 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=24 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=129 op=24 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=25 SRCH base="dc=ca,o=internet" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=129 op=25 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=125 op=28 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=125 op=28 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=125 op=29 SRCH base="o=our.domain" scope=0 filter="(objectclass=*)"
[17/Nov/2004:12:51:45 -0800] conn=125 op=29 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=125 op=30 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=125 op=30 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=26 SRCH base="dc=bc,dc=ca,o=internet" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=129 op=26 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=130 op=39 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=130 op=39 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=130 op=40 SRCH base="o=our.domain" scope=0 filter="(objectclass=*)"
[17/Nov/2004:12:51:45 -0800] conn=130 op=40 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=130 op=41 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=130 op=41 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=27 SRCH base="dc=ca,o=internet" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=129 op=27 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=126 op=25 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=126 op=25 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=126 op=26 SRCH base="o=our.domain" scope=0 filter="(objectclass=*)"
[17/Nov/2004:12:51:45 -0800] conn=126 op=26 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=126 op=27 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=126 op=27 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=28 SRCH base="dc=bc,dc=ca,o=internet" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=129 op=28 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=131 op=24 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=131 op=24 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=131 op=25 SRCH base="o=our.domain" scope=0 filter="(objectclass=*)"
[17/Nov/2004:12:51:45 -0800] conn=131 op=25 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=131 op=26 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=131 op=26 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=29 SRCH base="o=our.domain,o=our.domain" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=129 op=29 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=30 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=129 op=30 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=24 BIND dn="uid=ServiceAdmin,ou=People,o=our.domain,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=134 op=24 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=135 op=24 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=135 op=24 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=135 op=25 SRCH base="dc=ais,dc=bc,dc=ca,o=internet" scope=0 filter="(objectclass=*)"
[17/Nov/2004:12:51:45 -0800] conn=135 op=25 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=135 op=26 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=135 op=26 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=25 SRCH base="dc=ais,dc=bc,dc=ca,o=internet" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=134 op=25 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=26 SRCH base="o=our.domain" scope=2 filter="(|([email protected])([email protected]))"
[17/Nov/2004:12:51:45 -0800] conn=134 op=26 RESULT err=0 tag=101 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=27 SRCH base="o=our.domain" scope=2 filter="(|([email protected])([email protected]))"
[17/Nov/2004:12:51:45 -0800] conn=134 op=27 RESULT err=0 tag=101 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=28 ADD dn="uid=testing,ou=people,o=our.domain,o=our.domain"
[17/Nov/2004:12:51:45 -0800] conn=134 op=28 RESULT err=1 tag=105 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=29 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=134 op=29 RESULT err=0 tag=97 nentries=0 etime=0

Well if I open the console and open the Directory Server, then click on the Database in the configuration tree, then the 'Settings' tab, the 'Make database read-only' box is not checked. I know this is the dumb-ass way of checking and I've learnt not to trust the console any more than a one-night stand in Bangkok, so how would I go about properly checking that it hasn't turned read-only on me?
The only changes that would have affected the acl in any way would have been recent admin password changes, but these have been reversed.

Error was caused by operation ERROR in feature PINCH

Dear All,
We have created a new personnel area alongwith new personnel sub areas and assigned it with company code successfully. but when we performing hiring action it is giving error that "Error was caused by operation ERROR in feature PINCH".
Please assist me in resolving this issue.

Dear Majid Khan,
Can you share screen short of PINCH feature where we can better understand,
1. If you have properly maintained PINCH feature make sure that Administration Group name should be defaulted.
2. Check PINCH feature is in Active mode or ....?
Ur's
Mohan

Pocket PC DAQ operation Error 15

Similar Messages

Maybe you are looking for