Pod updation using function module

HI All,
Can any one say me how can we update the POD of a delivery By using the FM LE_POD_TVPOD_UPDATE. Please provide me what are all fields need to be filled so that we can update the LIKP and the TVpod table's.
Thanks and regards,
Naresh

Hi,
If your are not sure which values to be passed.
Try to have a SELECT on this table and put into an Internal table then pass this respective table fields values to the FM parameters.
Or in SE37 run this FM first by considerieng one entry from the Table T706F and cehck the results. Then you will come to know wat values to be passed. then do the same in the program by calling this FM.
If you can cehck this Fm, all the parameters are referring to the T706F table only.
Thanks & Regards,
Chandralekha.

Similar Messages

Batch status updating using function module BAPI_BATCH_SAVE_REPLICA

Hi,
I want to change batch status after creating the outbound delivery through inbound idoc, i was able to create delivery , but after creation, i should update the batch status using function module BAPI_BATCH_SAVE_REPLICA, but i was unable to execute this function module correctly,
Can any one provide details like what are minimum things that are required to update the batch status using this function module.
In my system batches are defined at plant level.
Please let me know the solution if any one knows this.
With regards.
P.Prasanth.

Look at BAPI_INCOMINGINVOICE_POST
Rob

Generic Delta Update using Function Module........ problem with CURR type

Hi Experts,
I try to create a generic data source using the transaction RSO2. I got the following error message
" Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
How shall i handle this issue..........any suggestions please........
thanks in advance
Cheers
Jaya

Hi Jaya ,
The error msg which is coming as...
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide" may be due to the currency field made hidden at the data source lavel. Also check weather you have included it in your structure (code).
So, to check it and make it unhide go to "Display Field List (F7)" in RSO2.
Hope it helps.

Generick Extarction using Function Module.

Hi,
Give me the steps Generic Extraction using function module.Thanks for your help.
Thanks & Regards,
Suresh.

Hi,
Check the below threads:
Using function module as the generic extractor
Generic Delta Update using Function Module
Document regarding R/3 extractors using function module/user exits
Generic extractors using FM
Also refer the document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
Reg
Pra

How to use function module to update data

Hello ,
Can any body have idea how we can use function module SAVE_TEXT to update the master recipe header and operation long text.
I want to use this functional module to update the master recipe long text
step by step procedure is highly appreciated
thanks & regards
siddhasrth

Hi
SAVE_TEXT
SAVE_TEXT writes a text module back to the text file or the text memory, depending on the storage mode of the corresponding text object.
You can use this module either to change existing texts or to create new texts. If you know for sure that the text is new, use the parameter INSERT to indicate this. The system then does not have to read the text first, which improves the performance of the function module.
If the lines table passed with the function module is empty, the system deletes the text from the text file.
Function call:
CALL FUNCTION 'SAVE_TEXT'
EXPORTING CLIENT = SY-MANDT
HEADER = ?...
INSERT = SPACE
SAVEMODE_DIRECT = SPACE
OWNER_SPECIFIED = SPACE
IMPORTING FUNCTION =
NEWHEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
check thi sample code
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = t_header
SAVEMODE_DIRECT = 'X'
* OWNER_SPECIFIED = ' '
* LOCAL_CAT = ' '
* IMPORTING
* FUNCTION =
* NEWHEADER =
TABLES
LINES = t_long
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5
Reward all helpfull answers
Regards
Pavan

Updating liveCache Data using Function Module or ABAP program.

Is it possible to update APO Live Cache using Function Module or ABAP Program.
Will the aggregation/disaggreagation remain the same if data is modified using Function Module or ABAP Program.
Regards,
Vikas

ello Vikas,
-> Please click at
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
& read about 'SAP liveCache'.
As you know objects stored in liveCache in the class containers can be accessed
and manipulated only via LCA routines which are methods of LCA objects.
The registration of the LCA routines is done automatically when
the liveCache is started by the LC10, check the lcinit.log file.
The shared procedures in the LiveCache are written in C++ and shipped
to the customers as binary shared libraries(LCA-Routines) < LCA build >
together with the LiveCache. The original C++ source code of the
libraries is not generally available to the customers.
The LCA routines could be called via "/SAPAPO/OM*" ABAP functions.
-> For SAP liveCache documentation in English:
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
< -> Database Administration in CCMS: SAP liveCache -> liveCache Assistant ->
liveCache: Monitoring -> Problem Analysis-> DB Procedures >
In transaction LC10 for the LCA connection choose liveCache:Monitoring
then go to Problem Analysis -> DB Procedures=>
The system displays an overview of all database procedures loaded into
liveCache, their input and output parameters, and other details.
-> Tr. /n/SAPAPO/OM16 ( in further releases /n/sapapo/om19 ) is provided by
SAP to get information about data stored in the LiveCache. If you would
like to get your own views, you should write a special report in ABAP using
"/SAPAPO/OM"-development class functionality.
-> There are standard function modules in ABAP available to extract/change data from/in liveCache.
-> In addition to the given information => find more information at:
SCM 4.0 -> http://help.sap.com/saphelp_scm40/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 4.1 ->
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 5.0 ->
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
You can go to the Advanced Planner and Optimizer documentation from the above links < Supply Network Planning Run -> Aggregated Planning -> SNP Disaggregation Or SNP aggregation . >.
If you still have open questions on the posted topic =>
Could you please give more information on your application scenario.
Thank you and best regards, Natalia Khlopina

Error in Data selection in R/3 Generic Extraction Using function Modules

Hi Friends,
I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
data selection successfully started
Data selection successfully ended
All Data packets completed.
are showing in red.
after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
it is giving this message wir no RSM 78.
Please let me know it

Hi Jerry,
Thanks for the immediate replay
But here in my source system job is getting terminated.
this is the status of job in Job logs.
the job is running till this step not going ahead.
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records
Result of customer enhancement: 157 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records
Result of customer enhancement: 157 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
pl. update me if any idea.

How to create Billing Plan in sales order using Function module /BAPI

hi,
How to create Billing Plan in sales order using Function module /BAPI
i hv check few FM such
BILLING_SCHEDULE_READ
BILLING_SCHEDULE_GET_NUMBER
BILLING_SCHEDULE_SAVE
But unable to create billing plan for a sales order.....any other method to create???

Hi,
Use this link.
Create sales order with billing plan via LSMW and BAPI BUS2032
BAPI or Function to update Billing Plan in Sales Order Items
Hope this will help you.
Regards,
Vijay

Code For Delta Extraction Using Function Module

Dear Experts,
I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
[email protected]
Best Regards,
SGK.

Dear KJ,
Thank for your response. I saw the code that you sent, you have used some ztables like ZSC_DELTA_IP, ZSC_SAFETY_DELTA, ZSC_SET_EXT_TIME
What are the fields that you have created in these tables , what is use of these tables, can you send the fields that you have used in these tables.
Thanks & Regards,
SGK

Usage of update Task Function Modules

During an application development using WDA I have stumbeled across this unique problem.
As recommended by SAP I am trying to use update function module to update my SAP Database. But calling the function in WDA does not update the database.
<b>On the other hand when I call the same function module without the key words in UPDATE task, it updates the database.</b>
<i>So my question is
Can I use Update task function modules in WDA?</i>
If answer is Yes, then I would like to know How?
If answer is No, then what is the best practice for updating the SAP database in WDA applications.

Try Add a commit work after the call.
Cheers
Phil

Using function module PT_ARQ_REQUEST_EXECUTE to approve leave requests

I'm building a screen to approve or reject multiple leave requests using function module PT_ARQ_REQUEST_EXECUTE as the SAP standard program RPTARQAPP does, and this seems to be working fine. However, I also need to include a note from the approver which is a bit of long text that ends up in table PTREQ_NOTICE. This is something that RPTARQAPP does not do.
I cannot find any way of passing this text into PT_ARQ_REQUEST_EXECUTE. The only way I can find of doing this is to call FM PT_ARQ_REQUEST_PREPARE first (command = PREPARE_APPROVE), update the CURR_NOTICE field it sends back in structure EX_REQUEST, then pass the changed EX_REQUEST structure into FM PT_ARQ_REQUEST_CHECK (command = CHECK_APPROVE) and then call PT_ARQ_REQUEST_EXECUTE (command = EXECUTE_APPROVE). This works fine for a single leave request, but when I try to use this process to approve two leave requests the CHECK FM gives me an error on the second record with a message referring to a time conflict with the first message even though the dates on each are not the same.
I've searched and there are a few posts about these FMs, but I still can't fix this problem. Has anyone ever dealt with this situation before and found a solution?

I've replaced the call to FM PT_ARQ_REQUEST_CHECK with the following and it seems to work pretty well. Though of course it will need a lot more testing.
STATICS:
    request TYPE REF TO if_pt_req_request.
CALL METHOD ca_pt_req_header=>agent->get_request
      EXPORTING
        im_request_id     = p_im_request_id
      IMPORTING
        ex_request        = request
      EXCEPTIONS
        request_not_found = 1.
CALL METHOD request->set_notice
      EXPORTING
        IM_NOTICE               = p_approver_text.

Delta Extraction Using Function Module ( Customization )

Dear Experts,
I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
[email protected]
Best Regards,
SGK.

Hi SGK,
I've done this for a delta based on a timestamp and it's actually pretty easy. The basic steps are:
1) Create an extract structure in SE11. Make sure the structure has a date or timestamp field in it that you can use for delta. You'll need to include the field twice if you also want to extract it to BW/BI since once it's chosen as the delta field then it will be hidden in the interface.
2) Create the extractor function module in SE37. You can use RSAX_BIW_GET_DATA_SIMPLE as a template. Make sure your logic restricts the data it retrieves according to the selections that are passed in I_T_SELECT, including restrictions on the delta field.
3) Create a generic DataSource in RSO2. Click Extraction by FM then fill in your extract structure and function module. Click Generic Delta and pick your delta field and the appropriate radio button (time stamp or calendar day). If your delta field is a timestamp field then be sure to set the upper and lower safety limits to -86400 and 86400 respectively. This might not be necessary on your version of SAPI but on mine there is a bug where it doesn't translate between system time and UTC (GMT) correctly so this was necessary.
You don't need to program any special delta handling logic in your function module as long as you restrict the data you retrieve based on the delta field (I_T_SELECT). This is because the SAPI takes care of catching the init, delta and repeat requests, translating them to the appropriate delta field values, and then passing them to your function module as if it was a full extraction for a specific date or timestamp range.
Hope this helps!
Jason

Delta Problem while extracting the data by using function module

Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
Venkat

Hi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya

How to upload Excel file in BI using function module in abap program

How to upload Excel file in BI using function module in abap program?

Hi Anuj,
To upload the file , you can try a standard program "RSEPSFTP" .
while you execute the program , a selection screen appears in which the inputs should be give as
RFC destination - The target server name
FTP command- PUT
local file - your file name
local directory - path of your local file
remote file - your target file name
remote directory - where it has to be stored
Hope this is useful for you
Thanks & regards
Anju

How to maintain Ztable using function module instead of SM30

Hi Friends,
please tell me , How to maintain Ztable or view using function module instead of SM30.
Thanks,
Veerendra.

Hi,
You can design your report and use Function module VIEW_MAINTENANCE_CALL for that.
You need to use Action type as 'S' for displaying and 'U' for maintaining the table.
Ex:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    ACTION                               = 'S'
    VIEW_NAME                            = 'Table Name'
EXCEPTIONS
   CLIENT_REFERENCE                     = 1
   FOREIGN_LOCK                         = 2
   INVALID_ACTION                       = 3
   NO_CLIENTINDEPENDENT_AUTH            = 4
   NO_DATABASE_FUNCTION                 = 5
   NO_EDITOR_FUNCTION                   = 6
   NO_SHOW_AUTH                         = 7
   NO_TVDIR_ENTRY                       = 8
   NO_UPD_AUTH                          = 9
   ONLY_SHOW_ALLOWED                    = 10
   SYSTEM_FAILURE                       = 11
   UNKNOWN_FIELD_IN_DBA_SELLIST         = 12
   VIEW_NOT_FOUND                       = 13
   OTHERS                               = 14.
Hope this helps.
Message was edited by: Imtiaz Ahmed

Pod updation using function module

Similar Messages

Maybe you are looking for