Podcast art not showing up in iTunes

Hey Guys,
I recently startd a music podcast using blogger / feedburner.  It was approved and is appearing in iTunes, but the artwork is not showing in the store.
I had originally used a 1400x1400 png image per apple's instructions, but just switched it to a jpg after reading somewhere that jpg is now the preferred format.
Any Ideas ?
Podcast
https://itunes.apple.com/us/podcast/dignan-radio/id657681622?mt=2
Feed
feeds.feedburner.com/DignanRadio
Cheers!

PNG should be perfectly OK, but JPG is fine. Your image is correctly referenced in the feed and exists on the server; the Store can be quite slow to pick up images, so I'm afraid it's just a question of waiting until it does.

Similar Messages

  • Podcast Channel Not Showing Up In iTunes

    I submitted my podcast to iTunes 3 days ago and I can manually subscribe to the podcast channel but it is not showing up in iTunes itself.
    Here is the feed:
    http://www.frontlinechurch.tv/podcast/frontline-podcast.xml

    The feed is fine and the image is correctly embedded in the episode I checked (the latest one); it appears when subscribing in iTunes.
    As I don't have an iPhone or an iPod Touch I can't check its behaviour there, and I don't know how these devices are supposed to handle this.
    However there are two points about the image which might be an issue, though I don't know: its size is 691 x 691 - it should be 600 x 600: this isn't a problem in iTunes, but as I say I don't know whether it might affect an iPhone. Also the resolution is 180ppi - this is pretty academic on a computer, but normally it would be 72 ppi. You could try changing one of the images - of course you would have to re-upload the media file - and see whether it helps.
    If it doesn't your best bet would be to ask in the iPhone Forum where someone would be able to check this for you.
    One further point: your episodes are missing the 'itunes:duration' tag which should contain the duration as h:mm:ss - this doesn't prevent the episode from playing correctly, but the durations won't show in the Store or in subscribing (until the episode is fully downloaded).

  • Podcast Artwork not showing up in iTunes

    I have a new podcast which was recently approved by iTunes. All appears to be well with the feed setup, but the artwork is not appearing properly in iTunes. I have checked the setup on my end and the raw feed XML, and I don't see the problem, as the URL to the artwork image seems to be specified correctly. Here is the feed:
    http://www.bighillsoftware.com/category/podcasts/runtime/feed/
    The <itunes:image> tag is present and points to the proper image. Any ideas on how to get the image to show up properly?
    Thanks,
    Brad

    iTunes caches the image, to save reading it off the server every time someone looks at the Store page, but can take some days before it appears in the Store. I can't give you an exact timing, but I wouldn't be surprised at 7-10 days. The feed and the image are OK, so it's just a question of waiting.
    When you add new episodes to your feed they will appear immediately for subscribers but will usually take 1-2 days to appear in the Store - again, due to cacheing, this time of the feed itself.

  • Podcast Description not showing up in iTunes/Feedburner

    Hi all,
    After my podcast got approved all the information entered in Feedburner was getting
    read in my Podcast in iTunes. After 2 months or so I started noticing that the Podcast Description got
    removed, then the copyright info and finally the author information.
    Here is a picture where I try to show where iTunes is not grabbing some of my feedburner information.
    Its looks like some of the Feedburner information is going through, as you
    can see in the picture, is grabbing my Podcast Picture, Category, new episodes, etc.
    iTunes Podcast Link: http://itunes.apple.com/us/pod…..d419121389
    Note: This is a category I setup through Wordpress and re-directing the feed to my
    feedburner account (.htaccess file)
    Would love to know, what is causing this and if I have to do something in order for this
    to get fixed.
    Thanks in advance.
    Pedro Sanchez, Jr.

    The feed registered with iTunes is at
    http://www.comopromovermimusica.com/category/podcast/feed
    iTunes is not using a Feedburner-generated feed so any amendments in Feedburner are having no effect.
    Your feed does not contain the 'iTunes declaration' at the top, nor any of the required tags for this information to show - 'itunes:author', 'itunes:subtitle' and so on. This I imagine is something you would need to address in Wordpress, but I can't advise on that.
    Any ht_access modifications are not likely to have an effect (though possibly a 301 redirect may). If you want to move iTunes to the Feedburner feed the correct method is to add a special tag to the feed, following the instructions here:
    http://www.apple.com/itunes/podcasts/specs.html#changing
    However this will have no effect if you don't have the itunes declaration at the top, which should look like this:
    <?xml version="1.0" encoding="UTF-8"?>
    <rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
    This is necessary for iTunes to be able to read the 'itunes:...' tags.
    This page may help you in showing how a feed should look:
    http://www.wilmut.org.uk/pc

  • Podcast is not showing up in iTunes podcast section

    Hi I've got a podcast that use to show up in iTunes but now it doesn't. I'm not sure but I think it has to do with how my content is produced. If you want to check it out the URL is http://www.archiveclassicmovies.com/acm.rss.
    Thanks,
    Scott

    you should double check your rss feed my rss feed had a problem like that. and i didn't know it but i went to www.feedvalidator.org they will tell you if anything is wrong with your feed and if there is anything wrong they will tell you how to fix it. hope this helps
    i just checked your rss feed and they said this... "Unable to validate, due to hardcoded resource limits (feed length > 200000 bytes)"
    so i hope this helps you check it out for yourself : )
    http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.archiveclassicmovies.com %2Facm.rss
    Check us out at thehistorypodcast.blogspot.com

  • Single Podcast Episode Not Showing up in iTunes

    The second episode of the ExactTarget Developer Podast is not showing up. This was originally related to a bad link which was subsequently fixed. Any idea of what is happening or how it can be fixed?
    Podcast: ExactTarget Developer Podcast
    Feed: http://feeds.feedburner.com/ExactTargetDeveloperPodcast

    The media file URL for the missing episode has two spaces after the '.mp3' and before the double quotes; it seems possible that this is causing iTunes to be unable to read the URL.

  • Podcast art not showing after subscription

    I'm clearly not the only one who has run into this but I have read and tried to follow all the various solutions.  My podcast's artwork shows up fine in the store, the individual episodes show the logo when playing, I've manually added the artwork to each episode's id3 tags and tried to validate the XML for the RSS feed.
    https://itunes.apple.com/ca/podcast/in-security/id765190900?mt=2
    Yet after subscribing (and playing an episode) I still don't get the artwork showing. 
    I just can't figure out where I am going wrong.  After downloading and playing episodes I have even selected the downloaded file and gotten the info and it's showing the artwork.  I've even gone back through and re-added the artwork for all the past episodes!
    Can anyone help?
    Thanks in advance! 
    Matt

    You're absolutely right! 
    http://in-security.org/images/fixed-i-guess.png
    All I had to do was... the entire process on a completely different computer.
    Just a case of iTunes for Windows being iTunes for Windows I guess...
    So for anyone else with the same problem in the future?  Just buy a new computer!
    Thanks for the input Roger!

  • Some Podcast episodes not showing up in iTunes

    Can anybody help? I've been using iWeb 1.1.1 without a hitch for awhile. The other day I updated to OS X 10.4.7. Made a change to something in iWeb, then published it. Now, only 3 of six podcasts show up in iTunes, shows 1, 4 and 6. Weird huh? Is this because of the OS X update? Anyone else experiencing this kind of problem?

    figured it out

  • Podcast Image Not Showing Up in iTunes

    I have a podcast and it has not been updated when I view it in iTunes on my iPhone
    http://itunes.apple.com/us/podcast/the-holy-temple-church-lord/id348263532
    When I view it in iTunes on my desktop it is updated but the logo never shows up.

    The logo is appearing in the Store page. Your feed is at
    http://webhost4life.com/templates/lightsOut.bml?lightsoutuser=holytemple
    however it's not possible to subscribe to it (which is why your iPhone isn't working) because the site has been suspended. You will have to take this up with webhost4life.com.

  • My podcast is not showing up in iTunes

    I just took over managing my Church's podcast, and we use an XML file on our server to update our podcast. I made quite a few changes recently to the xml because there were a lot of errors according to a feed validator. iTunes seemed to make the changes, but now they haven't updated my last two podcasts.
    Also, this podcast was made before you needed an apple ID connected to it, and I was wondering if there's a way to link an Apple ID to the podcast (or if that's even necessary).
    iTunes link: https://itunes.apple.com/us/podcast/l2-denver-church-podcast/id212089257?mt=2
    Podcast XML: http://www.l2today.com/L2_Podcast.xml
    Any help would be great! Thanks!

    You have introduced a fatal error into your feed which is rendering it unreadable by iTunes - when subscribing it shows as empty, and the Store will not update and is showing a cached version.
    The error is in your episode of 22 June:
    <enclosure url="http://www.l2today.com/itunes_podcast/ReasonableFaith/AReasonableFaith-Improving Effectiveness.mp3” type="audio/mpeg" />
    You've closed the URL with 'curly quotes" (I've enlarged and coloured them because at standard size you can't see it). This usually arises from copying from a word processor where 'smart quotes' are set up; XML does not allow this, you must use the standard straight quotes.

  • Artwork, author, summary etc for my podcast is not showing up in iTunes. WHY?

    Hi!
    I added a podcast feed (and got it approved) to iTunes a week ago, and I can now find the first (and so far only) podcast episode in iTunes:
    https://itunes.apple.com/se/podcast/allt-vi-sager-ar-sant/id601876036?mt=2
    But as you can see, iTunes is not picking up the information about author, subtitle, summary, artwork etc. What's wrong? Does anyone know?
    I'm using Blogger, Feedburner and Smartcast. I entered all the information about author, subtitle, artwork etc, into Smartcast.
    My original feed is here: http://alltvisager.blogspot.com/feeds/posts/default?alt=rss
    And my feed adress at feedburner is: http://feeds.feedburner.com/AlltViSagerArSant
    Can anyone help me?
    /Lisa

    The Store is picking up exactly what is in the specified tags in the feed:
    I don't know whether that's the text you were hoping to see. Your feed has a large amount of formatted text in the 'description' tags, but iTunes does not read this tag.
    This page illustrates what tags appear where in the Store and when subscribing:
    http://www.wilmut.webspace.virginmedia.com/notes/itunestags.html
    (It's for the previous version of iTunes but the differences are slight, just a matter of layout.)
    Note however that the image referenced in the feed does not appear when subscribing - the image has to be actually embedded in the media file. Please see this page for details:
    http://www.wilmut.webspace.virginmedia.com/notes/coverart.html

  • Want to change podcast artwork: not showing up in iTunes Store

    Hi. I want to change the icon/artwork for my podcast.
    My website (created with iWeb) = www.manleywoman.com
    My podcast in iTunes Store = Manleywoman SkateCast
    I use Garageband to create my podcast, then save to iWeb, then save to iTunes. So I changed the artwork on the podcast itself in Garageband. That worked fine and shows up properly on my website and on the episode for which the artwork was changed. I thought that changing the artwork on the podcast RSS page of my website would automatically change it in the iTunes Store, but so far no luck.
    Can someone walk me through how to make the proper artwork show up in the iTunes Store? Right now it's just a broken link. Thanks

    You can update your artwork via feedburner.
    1. Go to feedburner.com and log in to your account.
    2. Click on your feed for the show.
    3. Click on the OPTIMIZE tab at the top, then click SMARTCAST on the navigation bar to your left.
    4. Under PODCAST IMAGE LOCATION you can add the url to the image you want to use (store it in your site folder somewhere).
    You can also add in keywords, and description as well.
    Hope that helps.

  • Album art not showing up in itunes and iPod classic

    Can this issue be resolved? Any tips would be appreciated

    I'm sure it can. First of all, have you tried to "get album art"(by right-clicking and choosing it) as you signed into the iTunes store?

  • Podcast submitted but not showing up in iTunes

    I submitted my podcast to iTunes two weeks ago. When I try to resbumit to iTunes, it says that the feed has already been submitted. But the podcast does not show up in iTunes when I search for it.
    http://feeds.feedburner.com/IBozo
    Any ideas?
    Thanks,
    Brian

    They probably just haven't got round to assessing it yet: I can't give you a hard and fast answer about how long it takes but 2-3 weeks seems perfectly possible. When it's been accepted you will get an email including a URL for the Store page.
    Note by the way that the episode 'Drunken Sailors' has two 'enclosure' tags, both containing 'drunkensailor.mp3' but one from www.quass.com and one from Feedproxy. Only the first one will show in iTunes: multiple enclosure tags within one 'item' are not recognized. Otherwise the feed is apparently OK and can be subscribed to manually in iTunes (from the 'Advanced' menu).

  • Podcast items not showing on Podcast Page in iTunes App

    The Podcast items of the following Podcast are not showing when I choose to see the Podcast page within iTunes App: https://itunes.apple.com/ch/podcast/uzh-news-video-und-audio/id626789977?l=en
    It's possible to subscribe to the podcast, and all items are being shown in the library as well, but not in iTunes Store View within iTunes App.
    Please help : )
    Devices: Desktop (iTunes 11.02), iPad 2 & iPhone 4S (both with latest iOS) - same problem everywhere

    Hi Roger
    Many thanks for your very fast answer! : )
    In the meantime, we scanned the XMLfrom the RSS-Source (http://www.uzh.ch/news/topics/multimedia.rss) but we could not confirm any missing </image> closing tag.. : /
    You're speaking of 21 instances of 'image' tags while there are only 20 items available in this feed - maybe the 21st might be the <itunes:image... />-tag (for the podcast art) which is not in need of a closing tag?
    We know that iTunes doesn't like our image tag on item level. However, we do need this tags for other usage of this video-article-feed (f.ex. normal RSS feed subscribing) which is why we cannot remove it. But: do you know of any «trick» of specifically blocking that element for iTunes store since its troubling the latter so much?
    Many thanks again, and our kindest regards to you and beautiful Londontown : )
    Martina

Maybe you are looking for

  • Installing version 8.0 or 8.1.1 on Windows Vista

    Error 1935 -- installation will not complete. I have lost my pdf files for Version 7 and cannot download this new version.

  • Freight conditions in purchase orders

    Ladies and Gentlemen, I am trying to set up a freight condition that allows for freight charges we deal with to be divided up by dollar amounts instead of percentage or by the quantities involved. Is there a way to configure the condition to allocate

  • How can i change the direction of tab canvas in 10g ?

    hi all how can i change the direction of tab canvas in 10g at runtime i want to change the direction from left_to_right to right_to_left when i did that the form not appears well all prompts of item not dispalyed in order of its sequence ,in spite of

  • Can i use a fibre media converter with verizon fios

    I don't have wireless signal in my room because its too far away from the router, will getting this: http://www.newegg.com/Product/Product.aspx?Item=N82E16833156005 solve the problem?

  • Loading xml data into the datagrid

    Hi all, I'm trying to learn Flex. I have a small doubt in loading the datagrid from the xml response (from php script) mxml code: <mx:DataGrid id="dataGrid" x="69" y="250"> <mx:columns> <mx:DataGridColumn headerText="Name" dataField="name"/> <mx:Data