Podcast exhibiting odd behaviour with bluetooth

Ever since updating to iOS6 / iPhone 5 i've been experiencing odd behaviour with music playback. Now that the Podcasts app is a requirement, i'm not sure if this is directly related to the Podcasts app or if it's an iOS 6 quirk.
My iPhone connects to my car's stereo head unit via bluetooth. When i start my car it automatically connects and music, phone calls, etc, are all forwarded to my car's speakers. When i would switch my car off, music would stop automatically and i'd get out of my car and go about my day.
Everything worked absolutely perfectly in iOS 5 with the 4S.
The issue now with iOS6/iP5 is that when i switch off my car and use Siri or make a phone call, after i stop using Siri or if i end my call, the Podcasts app automatically resumes playback of what ever i was listening to when i switched my car off... Essentially it blasts music at me through the internal iPhone speaker for absolutely no reason.
Here is a step by step,
1. Start car
2. Play music
3. Turn off car
4. Music automatically stops
5. (while at the office, away from my car) Use siri or make a phone call
6. When i end the call or stop using Siri, music automatically resumes via the iPhone internal speaker
Is there any way to fix this?? It's getting quite annoying to have my iPhone blast me with music in fairly inappropriate situations.

Disregard, there is a thread about it here: https://discussions.apple.com/thread/4346946?tstart=0
Can't see any way of deleting my thread unfortunately.

Similar Messages

  • KYF exhibits strange behaviour with decimals

    Hi everybody,
    a DEC-key figure (IOBJ maintenance: additional properties->BEx->decimal places: Nothing Defined) exhibits strange behaviour regarding the treatment of decimals.
    When looking at the data in the cube (InfoCube maintenance->content) the value is 2,086.
    In the query the result is 2.0900000000 (%).
    Now comes the problem: in BPS (in the buffer) the value is 2,08. The system simply truncates the figure!  This is the value which is also used in the FOX and produces the wrong result.
    I need the system to sensibly round the values correctly to 2 decimals OR work with an additional decimal place.  How can this be done?
    Thanks for any input,
    Martin

    Hi,
    In the manual planning, while designing the layout, there is a setting in data columns tab called decimals. You have to insert 2 under this. Then in the layout data will be displayed with 2 decimal places.
    Hope this helps.
    Regards,
    Isha

  • Odd Behaviour with DVDs on IMac G5 20inch 1.8 GHz

    Suddenly the Superdrive DVD/CD (MATSHITA DVD-R UJ-825, Firmware DBN7) shows odd behaviour.
    It still reads CDs. But when a DVD is introduced, it will start "DVD Player" automatically, but then there is no hint of the disk. Neither does it show on the desktop, nore would it play. DVD Player would not eject it, but the eject button on the keyboard would.
    The DVD is ok, as it would play on my Powerbook G4 without problems.
    Any idea what might be causing this? - I had just performed the "Pro update"! Thanks for your help!
    iMac G5 20inch 1.8 GHz   Mac OS X (10.4.9)  

    Hve you checked to see whether a different DVD will play, Bernd?
    You might want to try deleting com.apple.DVDPlayer.plist from your Home/Library/Preferences folder, restarting and then seeing if it works.
    Cheers
    Rod

  • My Mac Pro (early 2008) has odd behaviour with 8800gt

    Hello Apple community,
    First of all, thank you for your support and sorry if I can't explain the situation correctly. I will be concrete.
    I bought a Mac Pro 3,1 (early 2008) 2 weeks after its launch with Nvidia Geforce 8800gt 512mb. It works awesome.
    Each five-six months I open it and remove all the dust I can carefully. I am used to do it and I do not touch anything fragile.
    The problem is that the screen flashes and then gets frozen everytime the Mac has to use hardware for graphics. When this happens, there are many dots and strypes moving arround with green and pink spots.
    I made both picture and video: http://www.cl.ly/7dGD(pic)    - http://www.cl.ly/7d4U(video)
    This happens in every place the Mac uses the graphic card (both browsers showing a youtube video, vimeo, etc... and time machine, which uses graphics for the background), everything get frozen but the sound doesn't until 1 or 2 minutes. When this happens, the only solution is to force shut down (press and holding the power button 5 secs).
    The only hope I had was formatting. I thought I had something in my Mac user which could make this happen. So I formatted the Mac Pro last night. A clean install. Everything updated... but the error persists.
    So...
    - I thought the problem was Flash, but it doesn't. The solution I have for playing videos in browser is disabling the hardware option for Flash.
    - I also thought the problem was the capture card but it doesn't because I tried everything without the card installed.
    - I have formatted and the problem persists.
    Something is wrong but I don't know what. I am now in the Mac and everythin works great. But the risk exists the moment I am playing a video, editing a video, in Time Machine, playing a game, and so on...
    When this happens and the Mac restarts, it shows this info:
    Interval Since Last Panic Report: 411819 sec
    Panics Since Last Report: 2
    Anonymous UUID: 184C346D-2B9D-47D6-B043-764960062C68
    Wed Jun 15 18:46:21 2011
    panic(cpu 7 caller 0×83014065): NVRM[0/2:0:0]: Read Error 0×00070000: CFG 0×061110de 0×00100406 0×92000000, BAR0 0×92000000 0×83b27000 0×092880a2, D0, P1/2
    Backtrace (CPU 7), Frame : Return Address (4 potential args on stack)
    0×8219b868 : 0×21b510 (0×5d9514 0×8219b89c 0×223978 0×0)
    0×8219b8b8 : 0×83014065 (0×83229dac 0×8329a600 0×83238d5c 0×0)
    0×8219b958 : 0×8381582d (0xbee2404 0xa417004 0×70000 0×8300c36e)
    0×8219b998 : 0×83726df9 (0xa417004 0×70000 0×8219b9b4 0×0)
    0×8219b9e8 : 0×8380352d (0xa417004 0xbef0804 0×1 0×1)
    0×8219bab8 : 0×8380b32a (0xa417004 0xbef2804 0×0 0×1)
    0×8219bbc8 : 0×8319adb7 (0xa417004 0xbef2804 0×8219bc1c 0×8219bcd0)
    0×8219bd08 : 0×8319b6a2 (0xa417004 0xbefa804 0×0 0×0)
    0×8219bd98 : 0×8319d858 (0xa417004 0xbefa804 0×8 0×2)
    0×8219bde8 : 0×83874fe3 (0xa417004 0xbefa804 0×0 0×0)
    0×8219be38 : 0×8319d970 (0xa417004 0xbefa804 0×0 0×0)
    0×8219bea8 : 0×83004b32 (0xa417004 0×0 0×0 0×0)
    0×8219bf48 : 0×82fb512e (0xa417004 0xaadaa80 0×8219bf78 0×29f562)
    0×8219bf78 : 0×22fd0d (0xa762400 0xa417004 0×0 0×0)
    0×8219bfc8 : 0×2a06dc (0×863ea0 0×0 0×10 0xb218524) Kernel Extensions in backtrace (with dependencies): com.apple.nvidia.nv50hal(3.0.4)@0×83713000->0×83b26fff dependency: com.apple.NVDAResman(3.0.4)@0×82fad000 com.apple.NVDAResman(3.0.4)@0×82fad000->0×8329bfff dependency: com.apple.iokit.IOPCIFamily(2.6)@0×787b6000 dependency: com.apple.iokit.IONDRVSupport(2.2)@0×820cd000 dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0×82114000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10J869
    Kernel version:
    Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
    System model name: MacPro3,1 (Mac-F42C88C8)
    System uptime in nanoseconds: 234842586427
    unloaded kexts:
    com.apple.driver.AppleFileSystemDriver     2.0 (addr 0×81c99000, size 0×12288) – last unloaded 122689357441
    loaded kexts:
    com.vmware.kext.vmnet     3.1.3
    com.vmware.kext.vmioplug     3.1.3
    com.vmware.kext.vmci     3.1.3
    com.vmware.kext.vmx86     3.1.3
    com.apple.driver.AppleHWSensor     1.9.3d0
    com.apple.filesystems.autofs     2.1.0
    com.apple.driver.AudioAUUC     1.54
    com.apple.driver.AppleUpstreamUserClient     3.5.4
    com.apple.driver.AppleIntelPenrynProfile     17
    com.apple.Dont_Steal_Mac_OS_X     7.0.0
    com.apple.driver.AppleMCCSControl     1.0.17
    com.apple.driver.AudioIPCDriver     1.1.6
    com.apple.driver.AppleHDA     1.9.9f12
    com.apple.GeForce     6.2.3
    com.apple.driver.AppleIntel8254XEthernet     2.1.1b7
    com.apple.driver.AppleMCEDriver     1.1.9
    com.apple.driver.AirPortBrcm43224     427.36.9
    com.apple.driver.ACPI_SMC_PlatformPlugin     4.5.0d5
    com.apple.driver.AppleLPC     1.4.12
    com.apple.iokit.SCSITaskUserClient     2.6.5
    com.apple.BootCache     31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
    com.apple.driver.AppleUSBHub     4.1.7
    com.apple.iokit.IOAHCIBlockStorage     1.6.3
    com.apple.driver.AppleFWOHCI     4.7.1
    com.apple.driver.AppleUSBEHCI     4.1.8
    com.apple.driver.AppleAHCIPort     2.1.5
    com.apple.driver.AppleIntelPIIXATA     2.5.1
    com.apple.driver.AppleEFINVRAM     1.4.0
    com.apple.driver.AppleUSBUHCI     4.1.5
    com.apple.driver.AppleACPIButtons     1.3.5
    com.apple.driver.AppleRTC     1.3.1
    com.apple.driver.AppleHPET     1.5
    com.apple.driver.AppleSMBIOS     1.6
    com.apple.driver.AppleACPIEC     1.3.5
    com.apple.driver.AppleAPIC     1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient     105.13.0
    com.apple.security.sandbox     1
    com.apple.security.quarantine     0
    com.apple.nke.applicationfirewall     2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement     105.13.0
    com.apple.iokit.IOSCSIBlockCommandsDevice     2.6.5 – last loaded 61580726779
    com.apple.iokit.IOUSBMassStorageClass     2.6.5
    com.apple.driver.AppleProfileReadCounterAction     17
    com.apple.driver.AppleProfileTimestampAction     10
    com.apple.driver.AppleProfileThreadInfoAction     14
    com.apple.driver.AppleProfileRegisterStateAction     10
    com.apple.driver.AppleProfileKEventAction     10
    com.apple.driver.AppleProfileCallstackAction     20
    com.apple.iokit.IOSurface     74.2
    com.apple.iokit.IOBluetoothSerialManager     2.4.0f1
    com.apple.iokit.IOSerialFamily     10.0.3
    com.apple.driver.CSRUSBBluetoothHCIController     2.4.0f1
    com.apple.driver.AppleUSBBluetoothHCIController     2.4.0f1
    com.apple.iokit.IOBluetoothFamily     2.4.0f1
    com.apple.driver.DspFuncLib     1.9.9f12
    com.apple.iokit.IOFireWireIP     2.0.3
    com.apple.driver.AppleUSBAudio     2.7.6f4
    com.apple.iokit.IOAudioFamily     1.8.0fc1
    com.apple.kext.OSvKernDSPLib     1.3
    com.apple.iokit.AppleProfileFamily     41
    com.apple.driver.AppleHDAController     1.9.9f12
    com.apple.iokit.IOHDAFamily     1.9.9f12
    com.apple.iokit.IO80211Family     314.1.1
    com.apple.iokit.IONetworkingFamily     1.10
    com.apple.driver.AppleSMC     3.1.0d3
    com.apple.driver.IOPlatformPluginFamily     4.5.0d5
    com.apple.nvidia.nv50hal     3.0.4
    com.apple.NVDAResman     3.0.4
    com.apple.iokit.IONDRVSupport     2.2
    com.apple.iokit.IOGraphicsFamily     2.2
    com.apple.driver.AppleUSBHIDKeyboard     141
    com.apple.iokit.IOUSBHIDDriver     4.1.5
    com.apple.driver.AppleHIDKeyboard     141
    com.apple.driver.AppleUSBMergeNub     4.1.8
    com.apple.driver.AppleUSBComposite     3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice     2.6.5
    com.apple.iokit.IOBDStorageFamily     1.6
    com.apple.iokit.IODVDStorageFamily     1.6
    com.apple.iokit.IOCDStorageFamily     1.6
    com.apple.driver.XsanFilter     402.1
    com.apple.iokit.IOATAPIProtocolTransport     2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily     2.6.5
    com.apple.iokit.IOUSBUserClient     4.1.5
    com.apple.iokit.IOFireWireFamily     4.2.6
    com.apple.iokit.IOAHCIFamily     2.0.4
    com.apple.iokit.IOATAFamily     2.5.1
    com.apple.iokit.IOUSBFamily     4.1.8
    com.apple.driver.AppleEFIRuntime     1.4.0
    com.apple.iokit.IOHIDFamily     1.6.5
    com.apple.iokit.IOSMBusFamily     1.1
    com.apple.security.TMSafetyNet     6
    com.apple.kext.AppleMatch     1.0.0d1
    com.apple.driver.DiskImages     289
    com.apple.iokit.IOStorageFamily     1.6.2
    com.apple.driver.AppleACPIPlatform     1.3.5
    com.apple.iokit.IOPCIFamily     2.6
    com.apple.iokit.IOACPIFamily     1.3.0
    Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 6 GB, SMC 1.25f4
    Graphics: NVIDIA GeForce 8800 GT, NVIDIA GeForce 8800 GT, PCIe, 512 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0×14E4, 0×88), Broadcom BCM43xx 1.0 (5.10.131.36.9)
    Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet 1, Ethernet, en0
    PCI Card: NVIDIA GeForce 8800 GT, Display, Slot-1
    PCI Card: pcibdbd,a117, sppci_video, Slot-2
    Serial ATA Device: OWC Mercury Extreme Pro SSD, 107,13 GB
    Serial ATA Device: SAMSUNG HD501LJ, 465,76 GB
    Serial ATA Device: ST31000528AS, 931,51 GB
    Parallel ATA Device: OPTIARC DVD RW AD-7170A
    USB Device: Keyboard Hub, 0×05ac (Apple Inc.), 0×1006, 0xfd500000
    USB Device: USB-PS/2 Optical Mouse, 0×046d (Logitech Inc.), 0xc01b, 0xfd530000
    USB Device: AT2020 USB, 0×17a0, 0×0002, 0xfd510000
    USB Device: Apple Keyboard, 0×05ac (Apple Inc.), 0×0221, 0xfd520000
    USB Device: My Book, 0×1058 (Western Digital Technologies, Inc.), 0×1100, 0xfd100000
    USB Device: Bluetooth USB Host Controller, 0×05ac (Apple Inc.), 0×8206, 0×5d200000
    FireWire Device: built-in_hub, Up to 800 Mb/sec
    I don't know how to solve this problem...
    Thank you for your help

    Try this:
    clone your system and repair it with Disk Warrior instead
    Or try a clean test system install on another drive
    A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
    Try to run w/o externals. MyBook included.
    Is that a 7200.11 1TB? they had a lot of issues.
    Run AHT off your OEM DVD.
    2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current.  Hopefully you have a UPS and is 1500VA unit.
    When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
    TimeMachine has its own bad habits, especially with Green drives and some externals.
    Try to rule out everything and then add back one at a time.
    And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old.  Might want ATI 5870 or 5770.

  • Odd behaviour with parameter id on selection screen

    Try this code
    PARAMETERS: p_fpath1 TYPE string LOWER CASE MEMORY ID rofile,
                p_fpath2 TYPE string LOWER CASE.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fpath1.
      PERFORM get_filepath CHANGING p_fpath1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fpath2.
      PERFORM get_filepath CHANGING p_fpath2.
    *---------Forms
    FORM get_filepath CHANGING x_filepath TYPE string.
      DATA: l_filepath TYPE string.
      cl_gui_frontend_services=>directory_browse( CHANGING selected_folder = l_filepath ).
    * If no filepath selected, leave the filepath unchanged
      IF l_filepath IS NOT INITIAL.
        x_filepath = l_filepath.
      ENDIF.
    ENDFORM.
    Run the program, and use F4 to choose a file path for p_fpath1 and another for p_fpath2.
    Hit execute
    Leave the program.
    Run the program again.
    Use F4 to choose the filepaths for the two parameters.
    For me, it's fine for p_fpath2, but for p_fpath1, I get no directory selector.  In fact, to get it working again, I have to log off and log back on.
    I'd like to know if anyone else gets the same problem, and also if anyone knows how to fix it!
    thanks
    matt

    The issue was with the STRING VARIABLE in parameters decelaration.I just changed it to RLGRAP-FILENAME it worked.
    Try these codes.
    PARAMETERS: p_fpath1 TYPE rlgrap-filename LOWER CASE MEMORY ID rofile,
                p_fpath2 TYPE rlgrap-filename LOWER CASE.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fpath1.
      PERFORM get_filepath CHANGING p_fpath1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fpath2.
      PERFORM get_filepath CHANGING p_fpath2.
    START-OF-SELECTION.
      WRITE : p_fpath1,p_fpath2.
    *---------Forms
    FORM get_filepath CHANGING x_filepath TYPE rlgrap-filename.
    *CALL METHOD cl_gui_cfw=>flush.
      DATA: l_filepath TYPE string.
      CLEAR :l_filepath,x_filepath.
      cl_gui_frontend_services=>directory_browse( CHANGING selected_folder = l_filepath ).
    * If no filepath selected, leave the filepath unchanged
      IF l_filepath IS NOT INITIAL.
        x_filepath = l_filepath.
      ENDIF.
    ENDFORM.                    "get_filepath
    LAST ENTERED VALUE WILL ALSO DISPLAY
    These codes work.
    Regards,
    Gurpreet

  • Odd behaviour with large(ish) wireless file transfers

    Hi I'm really pleased with my playbook - brilliant device !
    I do however have one general dislike ; that is for micro/mini physical connectors. They are a fact of life on many devices now so ......
    Anyway. In order to minimise my use of the micro usb connector I have been copying files to it across my wlan but have experienced some difficulty.
    Most recently (last night) I was copying a 230 Mb video to my playbook. At various times throughout the transfer, my computer's progress bar would pause for a goodly number of seconds then jump by about a 14 Mb increment (something buffering somewhere maybe ?) This went on until around the 210/220 Mb when my computer gave up and reported that the "connection to the device was interrupted, ignore cancel"
    I tried this with a number of files and got the same (or similar)  result each time.
    I realise this could be down to many things but just wanted to know if anyone else had noticed something like this happening.
    For info:
    Playbook 2.1.0.1088
    Macbook Pro mountain Lion
    Belkin F57D Router.
    Kind Regards

    bisleybloke wrote:
    Hi there,
    thanks for trying that. I guess I need to hunt a little more.
    Regards
    I have transferred lots of files a LOT bigger than 230Mb to the PB. Wi-Fi file transfers (and even microUSB transfers in fact) are sloooooooow by nature. I would suspect your connection to the router in your instance. I would investigate your Wi-Fi settings and adjust as required. I have had experience with this modifying something called channel width (I have posts about it here in the forums). Anyhow, that one little setting made a heck of a difference for me with throughput and general Wi-Fi stability with the PB on my network. 

  • Why odd behaviour with these sites?

    Hi. I'm on Tiger 10.4.9 and Safari 2.0.4 (419.3). I've noticed that I get a blank screen when trying to view the "View all ads" link in the apple.com "Get a Mac" section. The tab reads "ads.gif 1x1 pixels" and the page is blank. Anyone know what's going on?
    Also, when trying to view the macworld.com webpage, it has a lot of blank space before the text begins. When viewing this site via IE on a PC it displays fine. Surely a mac site hasnt been optimised for IE and not Safari?!
    Anyone know why my Safari is acting like this? Thanks!

    Have you tried clearing the Safari cache and Java
    Plugin Settings caches?
    Looks like that was the problem! Thanks!

  • Safari's odd behaviour with Shockwave/Flash

    Was trying to browse the European site for the new Nintendo Wii console, but finding that the links did not work in Safari.
    Go to http://ms.nintendo-europe.com/wii and choose UK/English as your language. This appends ?l=enGB to your URL. Then click on a link, for example "Philosophy", near the top of the page. This appends ?site=philosophy.html&l=enGB to your existing URL. That makes the whole URL http://ms.nintendo-europe.com/wii/?l=enGB?site=philosophy.html&l=enGB, which is invalid, as there are now two question marks in there.
    If you visit the same site in Internet Explorer, the name-value pairs are replaced, rather than appended to, which results in a valid URL.
    The code for each link is
    var so = new SWFObject("w_button.swf?u=philosophy.html&t=Philosophy&l=enGB", "button1", "82", "40", "7", "#ffffff");
    so.write("button1");
    but unfortunately, that's where my knowledge of Shockwave or Flash ends I'm afraid.
    Is this a coding issue or a browser issue?

    Hi m0thr4
    i see what you mean
    I'd guess it's a combination of coding/browser - fwiw, Camino handles the pages perfectly well on my G5/10.4.7
    It's worth contacting the site owners & letting them know about this..... also consider Safari-Report Bugs to Apple from the Safari menu.

  • Odd behaviour with DataReadQuery

    Hi,
    I'm using a DataReadQuery for a specialized area of data retrieval within our app.
    Running a unit test ("2-tier" outside of weblogic) the query fetches BigDecimal values.
    Running within our weblogic environment it returns Double types.
    Any thoughts as to why this might be occurring?
    Thanks.
    Mike

    Hello Mike,
    DataReadQuery is returning what it gets from the drivers, and so the differences in return types has to be due to different driver implementations. Check to make sure you are using the same JDBC driver versions inside and outside of Weblogic.
    Best Regards,
    Chris Delahunt

  • Why this odd behaviour with radio?

    If I select 'Martini in the Morning' internet radio I get an error message. It just won't work. If I select a station one or two above in the list, tune in, then jump forward I get Martini just fine. Why? Can I fix it?

    Have you tried clearing the Safari cache and Java
    Plugin Settings caches?
    Looks like that was the problem! Thanks!

  • Odd lockup using Bluetooth to get to Web with a Treo 700p

    Getting to the web with my Verizon Treo 700p is better with Leopard than it was with Tiger. (For instructions on how to do this see http://blogs.zdnet.com/Apple/?p=215) However I do get odd behavior. If the connection is lost (not sure if it the blutetooth or the web connection) and I attempt to reconnect, sometimes the "Connecting" in the title bar starts to scroll left to right and freezes. The fan on the MacBook starts to crank up and the machine is minimally responsive. I could not quit any apps. Could not even force quit. Oddly, turning off bluetooth on the phone gave me control of the Mac back. I thought I would mention this in case any one else has seen this and if there should be a fix in the works by someone. It is odd that a bluetooth device can have this level of control over the computer.

    Thought I should resolve this one. Seems I needed to upgrade the OS on the Treo. Apparently there was a minor release which fixed the issue (so minor that the only change in the version number is an underscore!) Works much better since the treo upgrade.

  • Why can't i use the radio on my nano 7g with bluetooth

    why can't i use the radio on my nano 7g with bluetooth. i wanted to use wireless feature at work but i only use the radio at work , so i bought bluetooth stereo headphones by plantronics, got the backbeat 903, at wal-mart  . got home got it all set up and works fine but not for radio , i'm so dissaponted and am thinking i might take them back and continue using the wire ware , but then again i like listening to my podcast while doing dishes and chores at home so the bluetooth would be better for that .

    i have sent a feedback form to apple about this problem . i hope that they work on a sulotion for it .

  • Nokia 6233 v05.10 odd behaviour

    Hello!
    After thoroughly searching not only this board but the entire Internet, I found no answer to my question so I decided to register and ASK.
    I need to know if any of you owners of a Nokia 6233 observed this odd behaviour of your phone - so please keep reading.
    I purchased the phone 16 days ago. Being my first Nokia, I took time to exploit its every feature, therefore draining the battery quite quickly. I discharged and fully charged the battery at least 3 times in the first 3 days, without leaving it plugged-in overnight (as far as I know this is no longer necessary). The battery life time increased progressively until a maximum of three days of normal use, meaning moderate talking (under 20 minutes per day), little or no use of Java apps, camera, media players or GPRS/EDGE connection. The screen savers are off, power saver is on, sleep mode is on. Packet data connection - when needed and network mode is GSM only because I do not use 3G. All these should get me the best stand-by time possible, right? Well, they did, until...
    I bought a new microSD card, 2.0 GB storage, made by SanDisk. The card works fine, I put my favorite music and video clips on it - all the stuff you do when you have enough space. Since then, the battery life decreased SUBSTANTIALLY to LESS THAN 24 HOURS. And there's more. The battery drains even if the phone is turned off, in roughly the same amount of time. I have never ever seen anything like this. Sometimes the battery is so low that the phone takes a few minutes before displaying the battery charging icon and, when started, it asks for hour/date settings.
    So, I need to know if anybody else noticed battery life decrease with bigger memory card capacity, and what's to be done.

    Have you tried using the in-box memory card(That came with the phone) again? There's something wrong with your phone and battery if the problem still occurs..
    GooD LucKMessage Edited by nj15 on 15-Aug-200704:10 PM

  • CBO behaviour with stale statistics

    Hi,
    our company sells an application based on an Oracle database. One of our customers has reported what I regard as odd behaviour from the CBO. I wonder if anyone here can confirm my understanding of how the CBO uses statistics to determine the optimal execution plan.
    The reported issue is this:
    There are a number of large (100 million rows+) tables in the application, these are partitioned by date and are subject to both inserts and updates although and although theoretically any date could be the subject of a change, these tend to concentrated towards the most recent dates. The customer analyses the tables with a sample size of 25% every few days. They claim that if they do not do this then the CBO starts choosing very non-optimal plans and this gets worse the longer that they leave it.
    As I understand it the CBO will use the statistics on a table. Even if those statistics are stale it does not have anything better to base a decision on so it must use the statistics that are there. In which case even though a plan may be chosen that is non-optimal given a new set of data, it should choose the same plan each time given the same query and the same set of statistics.
    Any thoughts?

    qwe10730 wrote:
    As I understand it the CBO will use the statistics on a table. Even if those statistics are stale it does not have anything better to base a decision on so it must use the statistics that are there. In which case even though a plan may be chosen that is non-optimal given a new set of data, it should choose the same plan each time given the same query and the same set of statistics.
    This could be a case of the query only looking the same. As you said, most of the action is about the last few days.
    If they only collect statistics every few days then as time passes they are going to be running queries about data that doesn't appear to exist.
    If you have queries for a single recent partition, then Oracle could produce a plan based on its expectation of a complete absence of data. If you have queries for yesterday's data when the statistics haven't been updated since last week Oracle will produce a plan based on the fact that the volume of data is probably less than it would have been a week ago. (etc.....)
    Doug Burns has started an interesting series of posts on partitioned tables and statistics - it may not cover all the details you need at present (he's only published 5 of a possible 10 posts so far). I've listed them here: http://jonathanlewis.wordpress.com/2010/03/17/partition-stats/ but the first one is here: http://oracledoug.com/serendipity/index.php?/archives/1562-Statistics-on-Partitioned-Tables-Part-1.html
    Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    http://www.jlcomp.demon.co.uk
    To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
    There is a +"Preview"+ tab at the top of the text entry panel. Use this to check what your message will look like before you post the message. If it looks a complete mess you're unlikely to get a response. (Click on the +"Plain text"+ tab if you want to edit the text to tidy it up.)
    +"Science is more than a body of knowledge; it is a way of thinking"+
    +Carl Sagan+                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • 5800 + bh-103 problem with bluetooth connection

    Hello,
     I have nokia 5800 xpressmusic with Version 30.0.011.C03.01 that was issued for the phone in 29/06/09.
    I also bought bh-103 bluetooth stereo handsfree and to my pity i realized that from time to time the bluetooth connection between my 5800 and my bh-103 is faulty. The phone shows that it is connected with this bluetooth but you cannot dial nethier from phone nor from the bluetooth bh-103. Even if i power off the bh-103 the phones stil shows  the bluetooth connection to be active(the icon of the headphone dissapears). If i power on the bh-103 even if the icon of the headphone in the display of the 5800 dissapears it can't be paired. What i mean is that the phone shows both the bluetooth connection to be opened plus the icon of the headset in the display but as i mentioned before you can't voice dial by pressing the big center button of the bh-103, neither you can dial from the phone itself. 
    Has anyone faced similar problems?
    P.S. this kind of problems i am facing since i bought the phone with the already installed version of the firmware

    First, restore factory settings in your 5800 phone. Next reset the BH-103 by pressing and holding down the multifunction key for more than 8 seconds.
    Now, turn it on (press and hold down the multifunction key for approx. 4sec)
    Turn on the bluetooth in your 5800 (you must do it within a second or two after you turn on the headset)
    Wait for the headset to detect and pair with the phone. The pass code is 0000. In your phone, set the headset as authorized, so that it can connect to your phone automatically.
    If the problem persists, I would advise you to check for the same behaviour with another bluetooth headset. Do you have problems while transferring files, connecting to the PC thru PC Suite, etc using Bluetooth?
    Cheers,
    DeepestBlue
    5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
    If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Maybe you are looking for