Podcast--lowering sound of one part of the recording

I just taped an interview in garageband. He was on the phone while i was at my mac. I, of course, am too loud. He is ok. How can i lower just my section? I can seem to edit the sound. I can cut it, but not edit it. I gotta be doing something wrong. I watched the podcast tutorial, but it doesn't go over that.

You can apply a volume curve, as HangTime suggests, to either lower your voice or raise his. Or, alternately, you can make cuts (Splits) and move your parts to a new Track and just set the volume on that. It depends on which you find easier.

Similar Messages

How to Activate at least one part of the Business Content of CO-PA

Dear Experts,
Is ther any chance of Activating at least one part of the Business Content of CO-PA, like Info Objects and key figures in the BI Content, berore replicating the CO-PA Data source?
As the structure of the info cube should correspond to that of the related operating concern, But BI
donot support predefined Business content for any operating concern.
Experts kindly sugest in this point of view. And also kindly provide live senario's with CO-PA
Extraction.

Hi
If i got your question properly
If you are talking about any operating concern BC Data sources , we dont have any BC Ds for COPA operating concern
can use KEB0/2 to work on COPA
COPA datasource enhancement
Re: copa
Edited by: Aduri on Dec 30, 2008 5:10 PM

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
There is still no sound, although the little level meter on the control shows a green bar rising and falling.
Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
Any other ideas?
Thanks.

I need to update specific records(of variable lengths) in a file. I can get the correct record but when I update it(add info), it overwrites part of the record following it. I am using labview 6.0

I need to update specific records(of variable lengths) in a file. I can get the correct record but when I update it(add or change info), it overwrites part of the record following it. I am using labview 6.0. I need to be able to insert information into the middle of a file without disturbing the data before and after

It's hard to give more specifics without more detail, but in general you're going to need to read in the entire file, split it into three pieces (everything before the record of interest, the record itself, and everything after the record of interest), modify the record, reassemble the three pieces in proper order, and write the whole thing back to the file.Of course if the file is very large you might not want to actually implement it this way, but conceptually at least, this is what you are looking at.If this file some sort of proprietary format?Mike...PS: this type of issue is why I really like databases...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How Can I obtain the tables of one schema and the record size???

How Can I obtain the tables of one schema and the record size???
Example:
TableName Record Size
Tabla1 12500
Tabla2 7800
Tabla3 2046

This is not an OWB question, but you can obtain bda-type information on tables by using the system view dba_tables.
Regards:
Igor

OO4O output cursor just ruturn part of the records

Hi,
I use VB and OO4O to call an oracle stored procedure, but the output ref cursor just return part of the records, for example, I supposed to get 300 records, but it just return first 100 records.
If anyone know what is wrong and how to fix it?
Thanks for any help.
William

To use an external decoder connection, your setting in the DVD player software should be to use SPDIF output, and your speaker setting should be 2 speakers. If you use the multichannel analog inputs also common on receivers, you can actually use more than 2 of your soundcard's channels.
But that's just an attempt to give you some raw material for some insight....
The digital outputs should always be acti've unless you're playing high-resolution DVD-Audio. That does tell us there's some sort of capability for forcing the digital
output off. It may be that it is being turned off when it shouldn't be. It's also
possible that something's changing AC3 bits when this shouldn't happen. All this points to some sort of corruption (a poison pill has found it's way into your registry, perhaps), or to some other misbehaving software (likely a driver if so). Did you install any new devices when you did the XP upgrade? If so, try getting updated drivers for those, first.
Then if that seems to have no effect, try removing and reinstalling the CL software, using "cleansweep" procedures for a more thorough reinstall. Otherwise, I'd start seriously considering starting over with a clean OS reinstall.
-Dave
[email protected]

When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

njordan wrote:
I can't figure out how to get rid of the "click" sound before I send off the recording!
drag the BottomRight edge of the region to the left, past the unwanted sound

TS2771 only getting sound from one side of the headset. Any fixes available?

I have an used Ipod touch. When i connect a headset, i only sound from one channel. Any fixes out there?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Importing From Min-DV Camcorder: Sound on One Clip, not the Other

Hello,
Taped a live presentation on Canon HV 20. Part of the way through, briefly stopped then re-started camera. After importing to iMovie 6, the 16 minute clip 'pre-break' has no sound on playback, although it had sound in 'monitor mode' and on the tape. The 22 minute post break footage plays sound just fine.
Thanks,
DoubleJD2

Here you go. I don't know exactly what I did to make the timeline clips disappear, but I was trying to find the effects clip and that's how it happened. I know I used the relink project files option to do so, and after that I couldn't find anything. I've checked everything and everywhere including trash, but nada!

I can only hear sound from one side of the head phone

I've plug in my bass guitar through a cord and a converter in the line in port on my PC. Then checked 'listen to this device' (head phone) which is connected properly as it worked perfectly when I play any sound in ma PC. But when I play my guitar, I can
only hear it from one side of the head phone. How to fix it!?

Is that compatible to give output from both sides (R + L) ? Can you check same thing on other system ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How can i put one part in front and one part in the back?

Alright i made this phone and a person and i want to put the bottom in front of his chin and the top behind the ear. How should i do this? Couldnt find anything in my classroom in a book, book.
thanks

The part in front and the part in back have to be two separate objects. Put a rectangle to completely cover the bottom part of the phone and let it mask the whole phone. Copy the clipping group (or duplicate its layer in the layers panel); on the copy, direct-select the end of the mask rectangle that doesn't bisect the phone and drag it the other way, so the rectangle now covers (and crops) the top half of the phone. If you do this on layers you need only make sure the phone-bottom is on the top layer, phone-top is on the bottom layer, and the person layer is between them.

Dynamic internal table ( make one internal table parts of the record )

hello i am doing a program that look for document billing put it in a internal table then loop the internal table and use the FM SD_DOCUMENT_FLOW_GET for get the document flow that fm return a table and i need make every record of that table part of the currect register , i already do this in a ugly static way but i am looking a dynamic way of do this , i know that the ABAP OO is the way but i am no able to get this approarch ( i am noob in abap and any experience with OO programing )
i will show the code for better understanding of it
pd: is a crappy code i know sorry
[CLick Here for the see the Code ( pastebin )|http://linuxlatino.pastebin.com/m39120e69]

thanks all for the answer , but i will try explain better my problem :
i have a it_data interntal table with document bill record i do a loop to that table and used the vbeln field in the FM for get the docment flow of that document billing number now the output of the FM is a table and i need take each record of that table am make it part of the current record of it_Data.
Example:
it_Data without the it_docflow data
*Sales ORg*   *Distri.Channel*      *Billing Type*    *Payer*         *Sold-to-party*        vbeln*
TP01         C1                     ZT17           1000524     1000524                 85003435 ..........
it_docflow table ( FM Output ):
*DOCNUM     ITEMNU    DOCNUV    ITEMNU            Description*
53107842   000000                          000000         Standard Order
65004606   000000       53107842   000000        Outbound Delivery
75179356   000000      65004606   000000         Invoice
57000118   000000      75179356   000000        Returns
85003435   000000      57000118   000000        Credit for Returns
5200003681 000000     85003435   000000       Accounting Doc.
now the it_docflow data add in the it_data record:
53107842 Standard Order 65004606 Outbound Delivery 75179356 Invoice 57000118 Returns 85003435 Credit for Returns 5200003681 Accounting Doc   TP01         C1                     ZT17           1000524     1000524                 85003435 .........
i hope this explain better my problem here , thanks again

If I purchase a second Airport, will it strengthen the signal from the router in one part of the house , so that the printer, in a basement can see it?

I have a router in my upstairs, main floor of the house.   My iMac connects easily to the router, but the printer does not. If I purchase a second Airport, will it strengthen the signal from the router so the printer will connect wirelessly to the network?
I had the printer connected to the iMac by USB , but when I upgraded the iMac to Maverick OS10 my scanner no longer worked, the more I fussed with it the less productive it was.   Now the printer no longer is available at all.   The computer does not see it.
The message when I turn them on is that the USB is not compatible.    I unplugged the USB cable, and would like to connect wirelessly.
Thank you for any hints
Carol Havens

If you have an Apple router now providing your wireless network, you could add another....like an AirPort Express, for example....to "extend" the signal wirelessly and provide more coverage.
This is always a bit tricky, because the AirPort Express would need to be located where it can receive a strong signal from the main AirPort wireless router.
For example, if you need more wireless signal in a bedroom at the end of the house, you would locate the AirPort Express about half way between the main AirPort router and the bedroom.
On a side note......only the print function will work when you connect an All-in-One device to the USB port on an AirPort, so connect the All-in-One using wireless for full functionality.

QuickTime 10.0 Screen Recording randomly skips parts of the recording?

I'm using the QuickTime Player to record some gameplay on my computer and sometimes, randomly, it skips part of the video. Sometimes its just a minute or 2 and sometimes its 15 minutes. I don't know why or how this could possibly happens, but it does. I have 366GB of space on my computer left so space is not an issue. I don't know what is. Please help

Bump. I'm having this trouble too, on both my iMac and my Macbook. I've tried every combination of events I can think of that might make this happen (switching windows, switching Spaces, etc. etc.), but the problem is so random and intermittent. Sometimes it records fine and I end up with a full recording, sometimes the middle is gone, sometimes just the end. The file size doesn't seem to matter; I have some good recordings that are nearly 500MB, and some that failed when they are only 30MB (and I have well over 300GB free). It's really annoying to not know until you've done 30 minutes of work that the middle is missing from the recording, and have no idea whatsoever even how to work around the issue.

My touch screen on my iPhone is not working correctly. I touch one part of the screen and another part responds. Is the there any way to solve this problem?

My touch screen screen is not working properly. I touch one App or icon and an different App/icon opens. It is an ultra sensitive touch screen, any idea on how to solve this issue?

Yes! Stop using the charger! My husband noticed it was worse when plugged in. One apple guy told me "restore" ... I did all that and it did not help. After I stopped using the charger, it stopped messing up. I used my husband's charger and all is well.
Later, an apple employee told me to bring in the charger for a trade in, because they had a recall on some of them.
I haven't traded it yet, but I plan on it.
Good luck! Let me know!

Podcast--lowering sound of one part of the recording

Similar Messages

Maybe you are looking for