Podcast not downloading only the 4th hr. of a 4 hr. radio program

Doing my 1st podcast download of a 4 hr. radio show. Each hr. is downloaded separately before moving onto the next hour. First 3 hrs. downloaded fine. Fourth hour not downloading. Next to box, where a checkmark would appear once download complete, is an exclamation mark. This is my 1st time downloading podcast. I have a Nano with 331 songs in my Library & no other podcasts. What's the problem with getting the 4th hour?

I answered my own question by accident.

Similar Messages

  • HT203167 I purchased the full book from the iTunes Store after reading the sample but the full length will not download only the sample  how do I fix this?

    I purchased a full length book after reading the sample but only the sample will download  how do I fix this   as the full length book appears under purchased books?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Podcast keeps connecting to the mobile network even when I have set up Podcast to download only from Wifi

    I hope someone can help me.
    I am really tired, fed up, with this Podcast application's behaviour. I have set up, both from the Podcats Settings and Mobile Network Settings that Podcast should NEVER use Mobile Networks for any download, it should only use WiFi.
    After doing that as soon as I open Podcast, if I check Mobile Networks configuration, or Podcast config, I see that again, by itself!!!, Mobile Networks for Podcast is ACTIVATED (even when the iPhone is connected to WiFi)
    Apple people, this is costing me money!!! And this strange (silent and from the back) behaviour, against the user settings, looks more and more like fraud (as when I apply the settings I define clearly my intentions of not downloading from the network, but your Apple's Podcast Application keep changing it against my will)
    I wish someone can help me to stop this application to revel against the user's will.

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • I purchased several songs and they are not showing up in my purchased file. Tried to go online and re-download them but ITunes is not giving me option to download only the ones I am missing. It *****

    I contacted Itunes and they told me to go to my account and re-download the songs. I opened my account and found the recent purchases, but they are not recent, there are 250 songs in that list, how come? And ITunes didn't give me an option to download only the ones I am missing. I don't want to download 250 duplicate songs.
    The Itunes updates are worst each time, BTW, Just starting to get sick and tired of Mac and Apple and Itunes and all this complicated stuff because of your paranoia of people "stealing" songs, but in fact, who is going to download songs ilegally is going to do it anyway, So all you are doing is to make it difficult for honest people who actually buy the songs and can't have them. I reported the problem several times and didn't get any more answers. Hope this works before I disoute the charges of the songs I don't have.

    Hi samfergs,
    I'm not sure how the Purchased Playlist decides what to put into it, but if you want to see all of your purchased items, then you need to go to the iTunes Store, and on the right side, under Quick Links, click on Purchased.
    Then, click on the Music (or whatever other purchased items tab you want to look at). If you are looking at Music, click on All Songs, and then on "All" or "Not on this Computer" (depending on what you want to see).
    Cheers,
    GB

  • HT1539 I recently downloaded my digital copy of titanic and from the itunes extras screen I push play and nothing happens.  The movie is not listed, only the itunes extra is listed in the list.  How do I repair?

    I recently downloaded my digital copy of titanic and from the itunes extras screen I push play and nothing happens.  The movie is not listed, only the itunes extra is listed in the list.  How do I repair?

    I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

  • Is any way to set up the store or computer to download only the cc version not the HD when you buy a movie?

    Is any way to set up the store or computer to download only the cc version not the HD when you buy a movie?

    every time that I download a movie in I tunes it downloaded the two version CC and HD, so it takes a long time for the HD. how can I stop or only download the CC version?

  • Is there a way to download only the HD version of a movie and not the SD version?

    In order to save space and to not exceed my service provider's data limit, I'd like to know if there is a way to download only the HD version without having to download the SD version as well? Currently, I have to open the "Download" box and highlight all of the SD downloads and delete and remove them. Of course, it begins to download them the next time I open up iTunes (and yes, I have turned off and on the auto-download feature).
    Any help is much appreciated.

    I did get an answer to this question from the rep at my local Verizon store.  I just wanted to provide the answer in case someone else has the same question.
    While in the email you wish to reply to, press the white envelope shape on the upper right corner of the screen.  This will open up as the reply to the sender.  If you press the word "reply" in the upper left had corner (of this window) a drop down box will appear with more options.  Reply, reply all and forward.  Hope that helps.

  • Podcasts have not downloaded for the past two weeks. What's happening?

    None of my podcasts have downloaded for the past two weeks. Anyone know wht's happening?

    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I have installed Firefox on my new Mac and Ixquick will not download on the Firefox browser with the message that it is only for the Firefox browser.

    Ixquick will not download on the latest version of Firefox on my new Mac.It gives me a message that it is for Firefox.

    See also:
    *https://www.ixquick.com/eng/download-ixquick-plugin.html
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • HT204370 My movie is not downloading but the movie extras are, how do i get the movie back without re-purchasing it?

    My movie is not downloading but the movie extras are, how do i get the movie back without repurchasing it? I've tried searching through my available downloads but only the extras showed up not the movie. All my other movies are there including the extras from the movie. I really want the movie & I don't want to repurchase it if I can avoid it.
    When I tried to get it through my Purchased in iTunes - iStore it says
    " You have already purchased this item" 
    "You have alreaady purchased this item but it has not been downloaded. To download it, select Check For Avaliable Downloads from the Store menu."
    Which leads me right back to having all the other tv shows & movies that aren't on my laptop downloading but not the actual movie I want. I already have the extras but I really would like the movie .
    Any help or advice would be appreciated
    Thank You

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw.  However, it will not download from the  "Update" option in CS6.

    I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw  (I was told that the Camera Raw update 8.3, which is available for CS6, included this camera).  However, it will not download from the  "Update" option in CS6.  I have tried over 10 times - it just says update is not working. and I cannot find an alternate way of downloading this file. So I still can use my camera, even thought I paid to upgrade.  HELP please.

    What OS do you have?  You say you have explained what you had (computer/opsys) but I honestly don't see it here.  If you had mentioned that my advice would have been different; I believe you can only upgrade as far as Camera Raw 8.3 on an older Windows system.  There is more information here (look specifically for the "Revert to 8.3 ..." titles).
    Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista
    What you've done/written in your last post confuses things further, unfortunately.  Photoshop 13.1 is strictly a Creative Cloud version.  The highest you can go is Photoshop CS6 13.0.1.3 with perpetual license.
    And as far as I can recall, that version can work on Windows back to XP:
    System requirements | Photoshop
    I don't think you're out of luck, but you seem to be leaping into doing things without having the full story, and are jumping to conclusions a bit too quickly.
    Here's what I suggest you try:
    1.  Remove Photoshop entirely with the Creative Suite Removal Tool: 
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    2.  Install Photoshop CS6 from your original media or from here: 
    Download CS6 products
    3.  Update the application using its own Help - Updates process.  That really should get you the latest Camera Raw version that will work.  If that does not bring you a Camera Raw that works with your Nikon, use the "Revert to 8.3" instructions above.
    -Noel

  • IMAP is not downloading all the Incoming emails fully in outlook 2013.

    Hi,
    I have configured IMAP in outlook 2013.Earlier,we are using POP account and now our email account are configured as IMAP in outlook 2013.
    After configured IMAP in outlook 2013,it starts downloading all the mails like Inbox,sent emails etc.But IMAP has not downloaded all the Inbox (incoming)emails.
    I have checked in emails server,there are 4,189  inbox emails but IMAP has downloaded only 2000 inbox emails only.
    The same i have checked in email server for sent items.In email server there are 1,755 sent emails but IMAP downloaded sent emails only 1000 emails.
    Please let me know why IMAP has not downloading all the Incoming mails fully & the sent mails fully.
    Your support is highly appreciated.
    Regards
    Pradeep.R

    Just try to remove the recent update that has been pushed out by Microsfot to Outlook 2013 and Office 365 users. You can do this by following given steps:
    Step 1: Open your start menu and click visit your Control Panel.
    Step 2: Click Programs and Features.
    Step 3: Click View Installed updates.
    Step 4: Locate either the KB2837618 or KB2837643 and remove them.
    Disable the "Show only subcribed folders" option in Outlook.
    Step 1: Right click the name of your account with the issue, then click the IMAP folders link.
    Step 2: Outlook will open a box with IMAP folders. There is a checkbox that says, "When displaying hierarchy in Outlook, show the subcribed folders." Uncheck that box.
    Step 3: Force sending/receiving within Outlook and everything should synchronize up properly.
    Changing the root folder path
    Visit your Account Settings, then Advanced for the mail account that you are having trouble with. This can be located at one of the following:
    Go to Change Account>More Settings>Advanced Tab
    File > Account Settings > Account settings > Change... > More Settings... > Advanced
    Step 1: In the Folders option, look for "Root Folder Path" and enter "INBOX" (with all caps).
    Step 2: Save your setting and force a Send/Receive
    Hope, It will resolve your issue.
    If you have still any doubt, feel free to comment. We will reply you ASAP.

  • HT5048 Hi, 1.34 is too much for me ... can I deselect Catalan, Croatian, Greek, Hebrew, Romanian, Slovak, Thai, and Ukrainian languages and download only the OS with less GB?

    Hi,
    1.34 GB is too much for me to download ...
    Can I deselect Catalan, Croatian, Greek, Hebrew, Romanian, Slovak, Thai, and Ukrainian languages and download only the OS with less GB?
    I tried several times but not successfull ...
    please help me to update my OS.
    thanks

    Are you asking why those non-ASCII characters are printing incorrectly? It's because the console is still treating the output as ASCII. The JVM is encoding each character as two bytes according to the UTF-8 spec, but the console is treating each byte as a separate, ASCII-encoded character. Changing the locale of the OS or the "file.encoding" property of the JVM doesn't affect the behavior of the console.
    When I run your code on my WinXP machine (leaving "file.encoding" at its default setting), I get this output: // __ System.getProperty("file.encoding"): |Cp1252|
    // __ |en_US|
    // __ |225|�|
    // __ |233|&#920;|
    // __ |237|&#966;|
    // __ |243|&#8804;|
    // __ |250|�|
    // __ |252|&#8319;|
    // __ |241|�|
    // __ |191|&#9488;|
    // __ |161|�|
    // __ |251|&#8730;|
    // __ |224|&#945;|
    // __ |223|&#9600;|
    // __ |232|&#934;|
    // __ |235|&#948;| The JVM is outputting the text as cp1252, but the console is treating it as cp437, its default codepage (encoding). When I change the console's encoding with the command "CHCP 1252" and run the code again, I get: // __ System.getProperty("file.encoding"): |Cp1252|
    // __ |en_US|
    // __ |225|�|
    // __ |233|�|
    // __ |237|�|
    // __ |243|�|
    // __ |250|�|
    // __ |252|�|
    // __ |241|�|
    // __ |191|�|
    // __ |161|�|
    // __ |251|�|
    // __ |224|�|
    // __ |223|�|
    // __ |232|�|
    // __ |235|�| I don't know if it's possible to change the encoding of the console in your OS, but that's not a showstopper. Just write the output to a file, then use a reasonably capable text editor to view the result. And there's no need to change all those OS/JVM settings; just specify the encoding when you open the file for writing: FileOutputStream fos = new FileOutputStream("out.txt");
    OutputStreamWriter osw = new OutputStreamWriter(fos, "UTF-8");

  • I brought an album from the iTunes Store, edited it, and put it onto my iPhone, but the only thing is, is that the featuring artists on the song are not showing, only the album artist, ive tried wipping my phone but no changes still, help me please

    Basically I brought a album of the iTunes Store, Depzman - 2 Real, specifically, edited the album features, such as, artists and put the featuring artists, which before I edited it was placed in brackets at the end of the song title like most iTunes songs, but when i put it on my iPhone which is on manually handle music and videos, the artist which i removed from the song title do not appear, only the album artists, I have reset my iPhone completely using the delete all settings and content in the hope of it being the iPhones fault and it has not changed, urgh, what a waste of time / effort, now I have now gotten to the point of fed up cos I feel like I've tried everything, ive re-downloded them and done it all again, still nothing, so now I'm puzzled and don't understand why it wont appear the same on my iPhone as it does in my iTunes library, please can someone help me solve this pain in the ***, I'm OCD when it comes to music and if it doesn't appear the way it should i get annoyed / frustrated -.-
    anyway thank you

    Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

  • I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?

    I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?
    Some please show me how to reset it.

    Here is some information from Apple:
    http://support.apple.com/kb/TS3274
    http://support.apple.com/kb/HT4057

Maybe you are looking for

  • Permitir liberação do estoque sem custo do item com multi filial

    Olá a todos, Tenho uma base de um cliente que está ativado a opção de multifilial, com isso a configuração "Permitir liberação do estoque sem custo do item" na aba de detalhes da empresa foi desabilitada. Alguém sabe me dizer se ela não pode ser usad

  • Can I install Phone designer for all user?

    Hi I have phone designer application I install it on my PC but when I install it for anther user and give me error Unable to connected to server. Is there any parameters needs to check on CUCM? How many times can I install it? Thanks Kaff

  • Airplay music issues everywhere

    I wonder, Airplay is nothing new nowadays, but nevertheless I have issues playing music all the time. I click the airplay icon on my device, it stays blued-out (selected) for a few seconds and unselects itself. No music. I have to try like 20 times b

  • How do I count the number of times a particular year occurs in a range of dates?

    One column in my spreadsheet is a date and time.  I want to be able to count how many times a particular year occurs. Is there a way to combine the COUNTIFS and YEAR functions, or is there something easier to use? I'm using Numbers '09. Thank you for

  • LabVIEW used for Device Drivers

    I want to know that can LabVIEW be used to port a card in Win CE platform. How can LabVIEW be helpfull in writing device Drivers for hand-held devices.Can any one tell me that can LabVIEW be used to write device drivers in general. Can LabVIEW be use