Podcast not showing up, neither is image Please Help!

Hello,
I'm sorry to start another thread when there are so many already with these problems but anything you could do to help me would be great.I have a music podcast called Rock Block
http://rockblock.wordpress.com/
http://feeds.feedburner.com/RockBlockPodcast
I submitted my podcast to iTunes and it got put in the store. I am finally able to search for my podcast and get it to come up but whenever I try any kind of link i get a message saying "The item you have requested is not available in the US store"
This is the link they gave me in the e-mail,
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?
id=260388815
I have also tried this: http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=http://feeds.fe edburner.com/RockBlockPodcast
This: http://www.itunes.com/podcast?id=http://www.feeds.feedburner.com/RockBlockPodcas t
and even this : itpc://feeds.feedburner.com/RockBlockPodcast
But nothing works!
It's been almost a week now and my image is also not showing up in the store either.
Please help! Any suggestions would be greatly appreciated!
Thanks

Brian
1 22fps sounds odd, perhaps a typo
2 anything over 24 fps is not officially supported at that resolution
3 is your source movie PAL/NTSC/24fps (29.97/25/24 fps) ? It's best not to convert as it can introduce stuttering between different frame rates
4 Even if other parameters are ok, I'm not clear of the bitrate here which should be no more than 5000kbps for h264
5 There was something in the iMovie 08 forum a while back when everyone was annoyed at the dumbing down when videos were looking soft and it was something to do with a deinterlacing flag not being set correctly on exports so only 1 field in a frame was showing making video look soft
6 You are best setting all parameters for output manually as you are largely doing. Winston often recommends using 960x540 at whatever frame rate is needed for HD output as he feels there is little difference in quality
7 Try converting short 20-30 sec clips only until you hit on a formula that works
8 Don't give up - you'll get there, frustrating as it seems
AC

Similar Messages

Ipod will not show up, in iTunes library please help.

Ipod will not show up, in iTunes library please help.
I just updated to the newest version of ITunes well, not just but a few days ago. Anyway I have windows 8, and in ITunes my Ipod 5th gen will not show up. I have tried somethings such as unpluging repluging, going to services and restarting, basiclly everything on yoyutube, none still work. It's ***** to cause I just wanted to put music on my Ipod, if anyone has an idea of what to do please give some suggestions.
Thank you, for trying to help.

Hello Stephen19wfwake,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
1. Try the iPod troubleshooting assistant:
If you haven't already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below.
2. Restart the iPod Service
3. Restart the Apple Mobile Device Service
4. Empty your Temp directory and restart
5. Verify that the Apple Mobile Device USB Driver is installed
6. Change your iPod's drive letter
7. Remove and reinstall iTunes
8. Disable conflicting System Services and Startup Items
9. Update, Reconfigure, Disable, or Remove Security Software
10. Deleting damaged or incorrect registry keys
Best of luck,
Mario

I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?

I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?

You said "The messages i received when i did not have signal are not showing up."
How do you know received them?
If the sender got a message that the Messagers were not delivered than they were never delivered and the only way for you to get them is for the sender to resent them

ALV not showing all the rows! Please help!

Hi Experts,
     I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
      I have coded like this:
      lr_field_settings ?= l_value.
lr_field = lr_field_settings->get_field( 'PRODUCT' ).
lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
lr_field->if_salv_wd_sort~create_sort_rule( ).
l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE( ).
l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
l_sortrule->set_group_aggregation( ABAP_TRUE ).
*...Aggregate Field PRODUCT
lr_field = lr_field_settings->get_field( 'QTY' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
What could be the problem?
Please help
Thanks
Gopal

did you somehow manage to set the "first visible row" property on table object
to 2.   Only thing I can think of that could cause this effect.
Cheers
Phil

EA4500 Router Device not showing up in device list - Please Help

Hi all
I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however.......
The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.
So I kind of think the two issues are linked.
Sorry for the ramble. Can anyone help please.
Thanks in advance
Alan

Further to this issue which I ignored as it did not really cause any issues, I recently clicked a samsung tv device which thinks that is three different devices. It has three lan addresses listed. One of the addresses listed is the original device that will not show up so I suspect that this is why it does not show up.
It seems that I have a conflict but I can find nothing anywhere to allow me to resolve.
I cannot even delete the Samsung TV device as its x button is not editable.
Should I just try removing the cloud connect software. I must admit that I am starting to think that I made a bad decision with this router.
Any help would be greatly appreciated

Songs not showing up in iPod. Please help!

Okay, today I noticed that there are select songs not showing up on my iPod touch.
I make playlists for all my music...and some songs will be in the playlists, and some aren't.
So when I search for the songs with artists or song name, it's actually ON my iPod and I can play it. Just not in the playlist I put it in.
So I check on iTunes to make sure they are in the playlist, and they are. And playable.
So why aren't some of the songs selectable in the playlists? They are on the iPod, but just not in the playlists. PLEASE HELP

Anyone?

Music i put on my iPhone from iTunes is not showing up on my iPhone, please help??

I have playlists and artists checked from my iTunes that i want on my iPhone. Certain/many songs from various artists (that i have checked) aren't showing up on my phone... i unchecked and checked again and no help. Clicked "show all music" on my iPhone to download from cloud won't work and i tried dragging an album in and put it in a playlist, no help. I tried everything i can think of, please help? i have a 32 gb iPhone 5 iOS 8.1

It's in recovery mode. Plug it into your computer running iTunes and restore it.

My iPhone 5s not showing radio in music application please help

I have this problem for many month now please help me solve this problem

What country are you in?
iTunes Radio is currently only available in the US and Australia

SAP_FND_TC_T_X1 Catalog not showing up in Launchpad. Please Help

Hi SCN,
Im implementing SAP Fiori Approve Request. I'm on a Hub Deployment.
My problem is I'm not able to see SAP_FND_TC_TX1 Catalog on the Launchpad.
I'm I supposed to create it manually? And the add the tile?
On the other hand I see that I can't find created catalogs on the PFCG of NWG, and yet I do find them on PFCG of ERP, is this an espected functionality?
I have installed UIX01CA1 SPS02 and IW_PGW SPS05 on NWG.
I have given the Role SAP_FND_TCR_T_X1 to my user (on NWG, it does not exist in ERP), and generated authorization objects for ztaskprocessing.
More Info:
Front-End Component/Versions:
Backend Components:

Problem was solved. Some services that were pointed to the ERP had to be directed to NWG:
Service
Before
After
ZINTEROP_0001
ERP
NWG
ZPAGE_BUILDER_CONF_0001
ERP
NWG
ZPAGE_BUILDER_CUST_0001
ERP
NWG
ZPAGE_BUILDER_PERS_0001
ERP
NWG
ZTASKPROCESSING_0001
ERP_WF
ERP_WF
ZTRANSPORT_0001
ERP
NWG

HT201272 It's not letting me re-download an audiobook that I purchased a few months ago with my apple ID. It's not showing up as purchased. Please help. Thanks.

I can see all my other previous purchases but not audiobooks. I went to the actual audiobook in the itunes store and clicked on "Buy" and it said I already purchased it but I can't download it for free anywhere.
Thank you
Ted

Correct.
You cannot redownload audiobooks.
As always it is your responsibility to backup your content.

TS3276 Mail activity reports receiving hundreds of messages at a time, but they do not show up in mailboxes. Please help!

This morning the activity monitor on my Mail window twice reported large streams of incoming mail. However, nothing showed up as new mail in any of my mailboxes. Have other's experienced this? Do you know what is going on?
Thank you!

davnxan wrote:
I'm having a wierd problem. I reinstalled OSX and did all the updates. Then I restored all my data from Time machine including my mail.
how exactly did you do that? did you restore Mail from finder? what exactly did you restore?
When I go into mail my folders that were on my computer all show up, but none of the messages are there.
If I look on my HD in user->library->mail->mailboxes and then look in the .mbox files that are there all the emails show up and if I double click on any they open, but when I look in the mailbox from within mail, nothing shows up.

Iphone4 frozen and none of the buttons are working and it isnt showing up in iTunes either please help!

my iphone4 keeps freezing on me and now it will not unfreeze. None of the buttons are responding and my iphone will not show up in iTunes. Please help!

See: If you can't update or restore your iOS device

Favorite Podcasts not showing artwork

In the My Favorite Podcast, the Artwork is not showing, just the generic image. How can I get them back without have remove them all from my favorite list and re-adding them.

Same issue here. It happened a couple of weeks ago and I removed them and then had to go find them all again. I also have one that when clicked on says "The item you have requested is not available". So I am unable to remove this blank image from my Favorites. I think this is a serious bug. I hope Apple will bring a fix. I sure do not want to do a factory reset and sync all my stuff again just to remove this blank icon that leads no where. If anyone finds a fix other than starting over please let me know.
Ben

Podcast Not Showing Previous Episodes

I updated my feed and the other episodes in the feed that preceded my newer episode no longer show up. Can someone please help?
http://www.weareomniverse.com/audio/omniversal.xml

Your feed has nine episodes , all correct as far as I can see. If there should be more, it is because whatever is making the feed has removed the earlier versions: some programs automatically remove earlier episodes once a certain number has been reached, but you can usually amend this.
I can't check on iTunes at the moment a I'm on Linux. Do you see nine episodes in iTunes? If not, could you post the URL for iTunes (control- or right-click the podcast image to copy it to the clipboard).

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation!

Podcast not showing up, neither is image Please Help!

Similar Messages

Maybe you are looking for