Podcast page black not white

When i click podcasts of any category in itunes everyone has white page with a clear description of or summary of their page along with each podcast listed underneath the category . The itunes player appears above and the podcasts play almost immediately when you click the play button. My podcast link brings me to a black page with my two podcasts listed which takes forever to download with no summary and no clear description of the podcasts unless you click read more . Why cant my page look like everyone else or do i need to produce more podcasts to qualify for a more professional user friendly page ?

White is for audio podcasts - Black is for Video Podcasts.

Similar Messages

N97 software update ready for black not white vers...

is anyone else in the uk amazed that Nokia have released the software update for the N97, but it is only available for the Black not white version of the phone?
I am truly amazed. Its not like they are different phones. . .is it?

I purchased a Nokia n97 in white and after 2 weeks my front screen wouldn't load and I couldn't connect to the internet,the phone I purchased was sim free and cost me 500 pounds,I checked for updates to rectify the problem because after reading on these sites it was a common problem and the update would fix it... Anyway there were no updates so i contacted nokia themselves and i got an email back saying
"We are unable to provide information on the features for future software updates or product releases ahead of time. All available information on our products can be found from the relevant support pages on our website.
Please note that unfortunately there is no information yet as to the release dates for the Nokia Software updater for the model N97 as product releases are country and market dependant."
wasn't the update supposed to ready for the 1st??...
i've since swapped the phone (after some faffing about) for a Nokia n97 in black,I turned the phone on and after 5 minutes I got a message saying important updates available,the firmware 11. was available after 5 minutes of me having the phone,i've not moved its from the same shop an i'm using the same sim,why send an email out saying they don't know when its going to be available,why not just put we've done it for the black we just don't know when its gonna be ready for the white!! so far i've had no problems but its only been a day!!

Picture is on Podcast page but not in the episodes....

HELP! our picture is up on our podcast page in itunes, but it is not showing up in the indiviaul episodes....
I tried the right click get info but i have no tab for artwork. Instead were the artwork should be the bos says artwork available when purchased. Our fellow podcaster made the artwork!!! Please help Our podcast is Bitten: A Twilight Podcast

From Apple's tech specs:
The itunes:image tag is not supported at the item level. It is possible to include art within individual episodes, but the art is included within the media file’s metadata, not in the RSS feed. To add artwork to an episode using iTunes, highlight the episode and select "Get Info" from the "File" menu. Click the Artwork tab. Then click "Add," navigate to and select an image file, and click "Choose."
What this means is that the image that shows on an iPod is like album cover art for song files, so you add the artwork to your podcast file before uploading it to your server.

Cover art shows on the podcast page but not in search

Ever have this happen? When you search for my podcast by keywords, the podcast appears in the list, but without the cover art. But on the podcast page itself, the cover art is just fine. http://foundit.libsyn.com/rss The podcast name is Found It! and the keywords for searching are geocaching, GPS, and hiking.

oops, cancel this. It's there now. Just needed to be patient.

Art on Podcast Page but Not Search Results

Podcast art shows up fine on my iTunes podcast home page, but only the generic podcast art shows on an iTunes search results page.
From my brief research (clicking on other generic podcast art in search results), this problem seems unique to my podcast. Most generic podcast art in an iTunes search result yields generic podcast art on the iTunes podcast home page.
I'd like my podcast art to show up on BOTH my iTunes podcast home page and in iTunes search results. Any idea if that reflects a problem with my artwork? Maybe a quirky spec problem?
Any help would be appreciated.
Kelli

As with many things in iTunes, this problem resolved itself. This morning when I ran a search that would contain my podcast in the result, my podcast popped up with the proper art in place.
I did, however, sent an email to iTunes support yesterday afternoon. From the response (which did not seem to address my question at all) I was not expecting a fix but maybe there was some help from iTunes.
Not sure - but happy to say it is resolved.

Is it possible to change the URL of an iTunes Podcast page itself (NOT the Feed URL)?

My company has an usual question:
While keeping all the individual podcasts the same, and the subject matter of the whole podcast series the same, my company would like to change the URL that Apple iTunes has assigned us. Is this possible, and how can it be done?
Again, I am talking about the URL that Apple iTunes has assigned us. The one that begins:
http://itunes.apple.com/us/podcast/career-...
We are having a small change in marketing emphasis. So my company wants to change one of the dashed English words in the URL, after:
http://itunes.apple.com/us/podcast/
These English words were based on the original title of our podcast. The original title of our podcast has changed slightly, with no problem. Now my company just wants to change the URL assigned to us by Apple.
Let me emphasize: There is no purpose of misdirection, evasion, or deceit here -- not in the slightest. My company is simply taking a different marketing angle. Our category is staying the same. The podcasts themselves are staying the same. My company would just like to update the URL assigned to us by Apple to reflect our new podcast series name.
ALSO:
We are a category-leading, very popular podcast. If we do change our iTunes podcast URL, we do not at all want to jeopardize our leading status in our podcast subject category. We want all our download stats to move with us over to the new URL. This is extremely important to us.
AND FURTHER:
If we do change our iTunes podcast URL, we want all our listeners to automatically find us at the new URL. We don't want any of them to lose their subscription because we changed our URL.
So in summary:
1. CAN we change our podcast URL (the one assigned to us by iTunes)?
2. Can we change the URL, but still keep our category-leading position and stats, exaclty as they are now? That is, will our old download stats move with us to the new URL, so we can retain our category-leading position?
3. Will podcast listeners going to the old URL automatically be forwarded to the new URL? Might any of our current listeners become unsubscribed as a result of the URL change?
I know this is an unusual, complicated, and multi-part question. I am looking for definitive, authoritative answers to all these questions.
Thank you very much for your help!!
David

You can omit the title altogether in the URL (together with the succeeding slash, of course). For example, my own podcast URL in the Store is
https://itunes.apple.com/gb/podcast/the-sound-of-78s/id166389425?mt=2
but this works perfectly well:
https://itunes.apple.com/podcast/id166389425
Indeed you can even put your own title:
https://itunes.apple.com/podcast/any_old_title/id166389425
So it's as simple as that!

With the newest update; when cliking on a picture to view in a larger size, the back ground of the pictures are in black; not white like the previous version

how can I get the back ground to be white again; with out "downgrading"

It is a new feature in Firefox 11+ versions to display a single image centered with an almost black background.
It is added by this stylesheet:
* resource://gre/res/TopLevelImageDocument.css
You can look at this extension to set your preferred background color and remove the centering.
* Old Default Image Style: https://addons.mozilla.org/firefox/addon/old-default-image-style/
See also these forum threads for other solutions (e.g. userContent.css):
*[[/questions/923127]]
*[[/questions/923431]]

Saved Selections are Black Not White

I was working on an image and made one selection, which I then saved as an alpha channel. It saved properly with the selection area white and the rest of the image black. I made another selection and saved it as an alpha channel, but the selected area was black, with the rest of the image white - which of course is the reverse of what it should be.
I tried some other images, made selections with various tools and each time I saved them as an alpha channel the selected area is black with the rest of the image white.
Why is this happening?
Thanks,
Greg

Thank you for your responses. I am able to invert the selection once it is made, but my query is to why my selection area initially was white (as it should be) and then suddenly all my subsequent selections are black.
I can invert them, as you point out, but isn't the selected area supposed to be white when I first make the selection, rather than having to invert the selection afterwards?

Can you personalise you podcast page? I notice some podcasters have black back grounds rather than white.

Would like to change the look of my podcast page? can this be done?

It's black for video podcasts and off-white for audio podcasts, and it's not configurable.

Hortizontal black and white lines across web browser screen that appears and disappears but blocks usually 3/4 of web page, did not have with last version heard it might be my graphics card?

Since downloading Firefox 4, I will periodically get black and white horizontal lines that cover about 2/3 of the browser screen. There doesn't seem to be any trend to the website or areas it happens at, and will sometimes happen multiple times while scrolling through a large news article. The lines stay fixed to a certain area. The only way to get them to go away is to refresh the screen or if the page is big enough scroll to an area not affected and then scroll back. I've heard from someone that it might be my graphics card. My computer's a hand-me-down but not terribly old so it could be that the card is just old or bad, any other ideas?
Picture: http://s294.photobucket.com/albums/mm116/Alterationnn/?action=view&current=firefox.jpg

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

How do I print a booklet with a colour cover but with black and white inside pages?

Hi there,
I need to print a large amount of booklets, which have a colour cover but are grayscale on the inside. However, I am having trouble setting up my document to successfully do this and I am unsure if it is something I can change in InDesign or if it is something I should figure out with my printer driver?
We used Page Plus for these booklets in the past and were able to do this with the same printer, so that makes me think there might be setting I could change in InDesign to achieve the same result.
It integral that the printer knows that the inside pages of the booklet are black and white, as we get charged per copy for colour printing and it is vastly increasing our printing costs.
My coworker believed that exporting the file as a PDF with the options: Colour Conversions (convert to destination - Pressure Numbers), Destination (sRGB IEC61966-2.1), and Profile Inclusion Policy (Don't Include Profiles) is making a difference. However, I don't believe is is the case.
If anyone had another suggestion that I could try, that'd be great!!

@Eugene – do you have details for "Export as Grayscale"?
I tried with the following details:
Target-Profile: Dot Gain 15%
Convert to Target Profile
Include Target Profile
If I do it this way I get:
Target Profile not included
Wrong numbers for my colors
(I tested with a self-made color wedge on the page for the percentages of Black shown below)
Seen in Acrobat Pro 10 with proof simulation "Dot Gain 15%":
100 % Black => 100 %
80 % Black => 82 %
60 % Black => 63 %
40 % Black => 43 %
20 % Black => 22 %
I could convert to "Dot Gain 15%" in Acrobat Pro's Preflight Panel, but this would show the same wrong percentages (just tested).
What I can do, however, is printing to PostScript with color separations, only color channel Black.
That would work, if I chose a Distiller setting, that will not change the color, to convert my separated PostScript file to PDF.
Seen in Acrobat Pro 10* with proof simulation "Dot Gain 15%" or any of the other available gray scale profiles.
(Acrobat Pro 11 might get this wrong due to a bug)
100 % Black => 100 %
80 % Black => 80 %
60 % Black => 60 %
40 % Black => 40 %
20 % Black => 20 %
This separated PDF (channel Black only) can now be converted with a self-made correction* in Acrobat Pro's Preflight Panel to a gray scale PDF/X-1a.
If done right * the color values stay as defined in inDesign.
Output in my case:
PDF/X-1a
OI: GrayScale profile Black ink of ISO Coated v2 300%
Tested with:
InDesign CC 2014.2
Distiller X
Acrobat Pro X
Mac OSX 10.7.5
Uwe
* There are several, convoluted steps necessary to get this (hope, I can remember them all):
Not optional:
Have a grayscale profile representing the channel Black of your intended output CMYK or generate one!
In my case the base CMYK profile was: ISO Coated v2 300%.
And I got a "Black Ink of ISO Coated v2 300%" profile for Grayscale conversions by generating this with my PhotoShop app.
Maybe optional, but helpful:
Change the color settings of Acrobat Pro X to use the color settings file you generated in PhotoShop where:
Grayscale is defined as the black channel of ISO Coated v2 300%: "Black Ink of ISO Coated v2 300%"
Mandatory, but somehow tricky:
Then on to the Preflight Panel of Acrobat Pro to generate a custom preflight profile.
None of the ordinary ones will fit exactly (at least in my Acrobat Pro X).
1. Make a duplicate of an already stored Preflight profile that converts color to Gray. Name it appropriately.
2. Include a single correction for converting to Gray Scale (at this time, or if you do something like that the first time, it's not possible to change or duplicate that single correction)
3. Save your new profile. Close the profile.
4. Open the profile again.
5. Now, suddenly it's possible to duplicate that single correction (converting to Gray Scale).
Do some changes, appropriate correction options, eg. adding "Black Ink of ISO Coated v2 300%" as OI to the PDFs you will convert.
4. Use that duplicate single correction in your new Preflight profile.
5. Save your custom preflight profile.

How can I convert a pages color document to a PDF Black and White doc.

How can I convert a pages color document to a PDF Black and White doc. Or, covert the color to B&W in a new doc?

> How can I convert a pages color document to a PDF Black and White doc. Or, covert the color to B&W in a new doc?
The general idea is that you colour correct photographs once, archive, and convert with or without colour changes. The archived photograph is unchanged - or we would be colour correcting the same photographs again and again and again.
If you have a photograph with a corrected exposure, you can open the photograph in the Apple ColorSync Utility, apply a colour space conversion to a grayscale appearance using the preinstalled ICC profile, save the photograph under another name, and place that in your pagination.
If you have a paginated document with corrected exposures, and any such non-scalable bitmap or scalable spline graphics as you have chosen to add, you can render the pagination as a whole to PDF through the same ICC profile, carrying out the same colour space conversion on any and all objects.
Caveat: If you intend the pagination for certain processes, in particular offset lithography, then you are probably expected not to render the type to grayscale, but rather to render it to single ink solid black. No software can determine what printing process you intend, you have to understand a bit about printing, and how to set up general colour space conversions in software. Ask your prepress provider, and if the answer is not prompt and proficient, pick another provider.
/hh

No matter what website I am on all of a sudden the page will be covered in black and white lines and I can't see any of the page. What is happening and how do I fix it? It has only started since I loaded Firefox 4 this week.

I am very frustrated because I keep having my pages become covered completely in black and white lines. It has even happened on this page when I tried to use the drop down arrow by 'this happened'. I can sometimes read the page if I click over the area I want to read but this is not common. This has only been happening since I downloaded Firefox 4. I thought this would be a better version but now I am not so sure.

I do not want to download another virus program.. I do not believe it is a virus. I am running the full version of Norton 360 and it is doing a daily scan. I have Windows 7, 64 bit OS.
This is very irritating !! If I wanted Yahoo I would ask for it !

My printer is Hp printer 932C it will only print in black and white not color

my printer is Hp printer 932C it will only print in black and white not color I got a new color cartage nothing still only printing in back and whit what can i do

There are a few things to check:
Make sure the blue tape has been removed from the nozzle plate.
Print a diagnostic page as shown in method 4 here. Does this page print color? If so the issue may be your driver settings. Check for a "Print in grayscale" setting and uncheck this box.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do i get Firefox to print web pages in black and white only (colors are interpreted in grayscale and some are too light to be read)?

i have a black and white laser printer. Firefox prints web pages by sending color images to my printer. The printer uses greyscale to interpret the colors. i really want Firefox to send black and white images to my printer, because with greyscale some of the colors are translated to print that is too light to be seen clearly.
Can this be done?
Thanks,
Chazbo

i just tried disabling adblock and checking if i had any no script or noscript sort of addon. i do not have a script killer. disabling adblock did not solve the issue.

Podcast page black not white

Similar Messages

Maybe you are looking for