Podcast playback... only one at a time?

I subscribe to several podcasts, in which i have accumulated about 12 episodes for each one.
the problem i have is that when i am done listening to one, the "play" feature does:
1. ends and goes back to the main menu if i have the REPEAT setting on OFF
2. repeats the same episode over and over if i have REPEAT set to REPEAT
I have tried it with SHUFFLE on and off, i have tried the REPEAT on and off, and so forth.
all i would like to do is listen to a podcast episode and when it ends, have it move on to the next one.
am i doing something wrong or is this just the way it is?

I really have no idea, but what if you make an "on the go" playlist of all the ones you want to listen to? Will that work? I would think so.
ellen

Similar Messages

I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time.

I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time. Also, I am able to move the picture using Transform. But unsuccessfull in making with two stills in same clip. Thank you for reply.

If you want a Picture in Picture effect, stack one still on top of the other with a connect edit. Use Transform to scale and reposition the top image.
Russ

Adobe Flash Builder 4 licence is for one desktop and one laptop, only one at a time run or

After installing Adobe Flash Builder 4 needed install AIR? Adobe Flex 4 SDK IS ALREADY INCLUDED?
Adobe Flash Builder 4 licence is for one desktop and one laptop, only one at a time run or...?

hi,
Flashbuilder has the ability to create and run Air content from the IDE, to actually usean Air App outside of the IDE you need to install Air.
Flashbuilder install includes 2 sdks, the 3.5 sdk for 'backward' compatibility with Flexbuilder and for targeting flashplayer 9, the 4.x SDK for Flashbuilder and targetting flashplayer 10.0 and above.
As far as fair use is concerned Adobe have had fair use software licensing for a while, single user 2 devices is not a problem, what is not clear is if you can use the software on both devices at the same time.
David

Where can I see the downloads LIST when downloading podcasts, like in the older version of iTunes? I find it frustrating that I see only one at a time now ! Any suggestions please?

Where can I see the downloads LIST when downloading podcasts,
like in the older version of iTunes? I find it frustrating that I see only one
download at a time now ! Any suggestions please?

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

Multiple file uploads, or only one at a time?

I have multiple files in folders on my iPad. I want to upload entire folders of documents. So far I have only been able to upload one document at a time. Then after uploading, I have to put them in acrobat.com folders one document at a time. It is very time consuming. Is there any way to upload multiple files at one time? Once the documents are uploaded, is it possible to move multiple documents into a folder at one time? Or does each document have to be a separate upload action, and each move into folder a separate document-by-document one at a time?

On my iPad I have been opening and saving pdf's in Adobe Reader. I would like to upload these pdf files from the iPad Adobe Reader to acrobat.com. I have thus far been uploading them from the iPad one fie at a time. It is very slow and tedious. There is also no way to get multiple pdf files from the iPad Adobe Reader to a computer except one file at a time. So it seems that once I used the iPad Adobe Reader app to save the files, I am stuck with one file at a time movement. I did, however, find that once I get files to acrobat.com, I can move multiples files at a time into folders on acrobat.com via the iPad. The problem is getting them uploaded from the iPad Adobe Reader app to acrobat.com. Is there a solution I'm missing, or am I correct in my understanding of the iPad Adobe Reader app upload situation?

Only one at a time?

Is there no other way of adding rows or columns between existing rows and columns except 1 at a time?

It seems a bit odd (perhaps there is a bug)... but here is how it is working currently:
(1) Select the number of rows you want to add
(2) Do not use the little row header pop up. It only will add one at a time.
(3) Instead the menu item "Table"/"Add Rows Above" or "Add Rows Below" (note that "Row" is plural in these menu texts). Alternately you can right click on a row header.

Process inbound Idocs only one at a time

Hi all,
I'm searching for a solution to the following problem:
We are receiving ORDERS-Idocs into our R/3 4.6C-system. These Idocs are processed by our own Z-function module. The function module's coding should assure that e.g. the first idoc of each day sent by a certain customer should create a new sales order (VA01), whereas the following idocs of that same customer should only add items to that sales order (VA02).
To make this work, we must make sure that no two idocs of the same sender are processed simultaneously, or even better that the function module is running only once at a time. I tried the following practices, which didn't satisfy our needs:
- create own ENQUEUE/DEQUEUE object and call the ENQUEUE at the beginning of my function module - didn't work!
- use GET PARAMETER ID to read a flag and SET PARAMETER ID to set the flag - didn't work, second idoc was too fast!
- write a record into own DB table and check existing entry with SELECT SINGLE FOR UPDATE - worked only sometimes, needs COMMIT WORK.
- check if there are any flags you can set in WE20 - couldn't find any!
Does anyone have a idea for my problem?
Greetings
Klaus

Hi Klaus,
form the mentioned options, I would give enqueue / dequeue a second try.
I would use customer (/sender) as key field for your locking object.
If you try to set the lock right in the beginning of your FM, whole customer should be locked for processing. Second test is of course, if already a sales order exists.
Maybe here the problem occurs: when you have some parts in update task, select for sales order is not successful for some (micro-)seconds.
Solution for this part: use synchronic booking / commit work and wait. Maybe make a test with a select for VBAK in the end of your FM to test existence -> if not successfull, you know you identified your problem.
If this is your problem, you should make a new enqueue after commit (because it will be deleted by commit) and wait until DB gives you new VBAK entry.
I would start with a test, why all this different locking options don't work (instead of looking for a different locking option): make a select after your sales order creation. If this is not successfull, then here is your starting point.
Regards,
Christian

Can delete mail only ONE at a TIME

Ever since the macmail app, changed it's appearence etc., I have been unable to delete unwanted messages I spot in my inbox. In order to delete them I have to open them one at a time, hit delete and w a i t. Going through 150 emails a day one at a time is unacceptable. What's going on?
emac Mac OS X (10.4.3) 1G; PC G4; 512 MB SDRAM;Superdrive;80 GB HD;Lacie external 250G HD

Ever since the macmail app, changed it's appearence etc.
What are you talking about? Mail hasn’t changed its appearance since Mac OS X 10.4 (Tiger) was released.
If you’re not using Mac OS X’s Mail, but .Mac mail on the web instead, you’re posting in the wrong forum. The right forum for such questions would be .Mac Email On The Web. This forum is for discussing issues related to the Mail & Address Book applications included with Mac OS X 10.4 (Tiger).

Checks gapless playback on one album every time I open iTunes

I bought an album on the iTunes music store.
Every time I open iTunes, it checks this one album for gapless playback. Every Time! I've tried deleting it from the library and adding it again, but that doesn't help.
What's weird though, is that we have 2 MBP's, each with their own iTunes library. But we share the files on a networked hard drive. This only happens on my computer, not the other one.
Any suggestions?

Please check you system if it is free of Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to CNET's download.com to download a free version of Malwarebyte. Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
press and hold the F8 key. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter.
Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

Two Airport express. only one at a time able to stream music....

I have one Airport express feeding me the internet from the office. this unit has no speakers conected to it.
the second unit is in the living room and i want to send music to that one.
when i select the living room airport express i can't go online.
when i select the office unit i can't stream music to the
HiFi.....
I have downloaded AIRFOIL (3rd party app) to fix this but it can only connect to the airport express that i have select on the menu bar.
i hope this makes sense to someone out there
Thanks for your time.
G4 ibook Mac OS X (10.4.7) upgraded hard drive, 512 ram, Ipod 30 video.
G4 ibook Mac OS X (10.4.7) upgraded hard drive, 512 ram, Ipod 30 video.

clayti-nz, Welcome to the discussion area!
Configure the 2nd AirPort Express (AX) using the steps described in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Resultset - retrieves all rows or only one at a time

Hey guys,
I am using oracle DB. Lets say the query i run has about 1000 records
when i call:
prepareStmt(cstmt);
Rsultset rs = cstmt.executeQuery();
Do I get all the records, or do i get them one by one
when i call
rs.next
is this DB specific??
This is simple q, but i been working with oracle and java for a while, and for some reason this never came up.
thank you.

The driver implementation is free to retrieve as many or as few rows at a time from the database as it wants. You can suggest to the driver how many rows at a time it should retrieve with setFetchSize(); the driver is free to ignore your suggestion (but many drivers honor it). The fetch size default varies wildly from driver to driver, from 1 row at a time to all rows at a once. For the Oracle thin driver, the default is 10, which is usually too small to give the best performance (I use between 100 and 1,000, usually 250).
Note that when you're working with a very large ResultSet, a driver that does "all rows at once" can cause you to run out of memory. Also, some drivers will cache every single row when using a scrollable ResultSet (and again run you out of memory) but not do so with a forward-only ResultSet (Oracle has this issue).

IPod won't play album tracks consecutively, only one at a time

So I was trying to listen to some Brian Eno last night.
How do I tell my iPod that Brian Eno soundtracks are, um, soundtracks - as in, intended to be played piece after piece, one through thirteen? For example, if I go into eg a Kasabian album, I can play the whole thing without having to re-find the album for each individual track, + the tracklisting in the 'Now Playing' window on the iPod shows '1 of 13', '2 of 13', etc.
But if I try to play Eno's The Pearl, the 'Now Playing' display tells me each track is '1 of 1' - so it will only play one track + I have to go back into the iPod + manually select track 2, track 3, etc (which are all still '1 of 1'). And here's the weird part, if I look at the same tracks in the 'Get Info' window on iTunes on my laptop, each track is clearly labelled '1 of 13', '2 of 13', etc. Whassup with that then? It seems as if that info simply isn't making it as far as the iPod.
I tried designating the album as a compilation, but this just made Eno vanish from the Artists menu + didn't solve the problem.
Double weirdly, this seems to be a problem I have only with Brian Eno - is he on some sort of Apple blacklist??!
For the moment I've got a workaround, in that I've made Eno into a playlist - but surely there's got to be a correct solution?
Any help gratefully received. Thanks.
Fi

Did you ever get a sensible answer to this problem, I have a similiar problem on my Mac. I have one track from iTunes Store, which refuses to play on my iPod......have downloaded stack of music before, this has never happened previously!
iMac 20" Intel Core 2 Duo, 250 gig HD, 1 gig Ram Mac OS X (10.4.8) Seagate 320 gig & LaCie 80 gig EHD's. Using Boot Camp with Vista Premium

2 Macs on APBS but only one at a time

OK gang here it is. I just updated to the new APBS Extreme (Square one) from the spaceship one. Everything switched to the new station fine.
I have 4 computers on the network. 2 PC's (1 Wireless G and 1 cabled desktop).
2 Macs. 1 Macbook Pro that is NOT N compatible. 1 13" Macbook that IS N compatible. I have not downloaded the N enabler from the store.
Problem: Everbody can use the Internet at the same time except the 2 Macs. When the MacBook Pro is on it kills off the Macbook.
Any suggestions?

Make sure that the MacBook Pro and MacBook are not configured to use the same static/manual IP address in the AirPort settings.

When I download photos, I right click on the photo, then "save as", the browse opens and I select a folder. I then have a number of problems usually only one at a time:

sometimes they come in a zip file, which I really don't know what to do with, so I have unzipped it to a picture folder which leaves an entire folder within a folder. That also leaves an empty zip folder in my pictures.
The craziest thing and most unwanted as well, is that although I have downloaded only a specific file, the folder fills with photos that I have only looked at in my browser...tons of them! Most are unrelated to each other as well as viewed on different dates.
Sometimes, the file extension is an unknown file type to me at times (sorry can't find an example).
I have only tried to download pictures from FaceBook to date.
I apologize for not understanding some computer basics - which probably are the causes of most of these problems. I have read most of the literature for Firefox, but a lot is above me.
I really hope that you can help me and that my LONG description and information is just a pain.
Thanks in advance

On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
Regards
TD

External Harddrive - Only one at a time?

I've found that I cannot get two external USB 2.0 harddrives to show up at the same time, hub or no hub, whatever I try. I also can't connect an external DVD-RW drive. It doesn't even show up at all. The harddrives, when they do connect, are slower than molasses. Much faster on the windows machine. Now, in all cases, these have worked before. I have a first gen G4 1.42GHz PPC... is this thing just getting old? I'm going to try to install leopard on it tonight... Is that even wise? I'm running 1GB of ram, so it should be...
On an entirely different note, I am an American in Japan, and wondering how going about buying some more apple products will work out with customer service. Although I speak elementary Japanese, it is certainly NOT enough to deal with Japanese tech support- and I wouldn't want to. I also am a junior high-school teacher, and wondering if I am eligible for and education discounts.

Systems slow down and begin misbehaving for two basic reasons - firstly (and most commonly) OS and applications get more and more bloated, so consume greater and greater amounts of CPU time, and hog greater RAM and system resources. Secondly, hardware issues where component tolerances affect overall performance - in each instance this is marginal, though the cumulative effects can be noticeable.
In both cases, Macs have a bit of an advantage because neither MacOS or applications tend to bloat at the same rate as Windows/Windows apps, and in hardware terms, one of the reasons Macs cost a little more than equivalent PCs is because hardware components are typically tighter tolerance and therefore less prone to degrade to significant levels.
Of course that doesn't entirely hold true for mechanical devices such as hard drives, where heavy use can create significant wear rates which then render the system liable to slowdowns and even crashing. Video editing is not, however, particularly demanding in terms of the reliability limits of modern hard drives, so the fact you use your system for this would not typically cause a problem - unless of course you are a very heavy user. Even so, you would normally notice other symptoms if the drive were deteriorating - not least errors when you verify it, or increased and unusual noises or crashes.
The problem with installing Leopard at this point is that it introduces another unknown. Assuming you are familiar with the behavior of your system with the current OS, and with the current OS's features and performance, Leopard would do little other than mask the problem and make locating the cause more difficult. It must also be said that you might find it creates an additional performance hit.

Podcast playback... only one at a time?

Similar Messages

Maybe you are looking for