Podcast playlist no longer works

I just synced my ipod nano, and my podcast playlist no longer works. This seems to be due to an upgrade to iTunes 9. It seems to only want to deal with music files in playlists, not podcasts. What am I doing wrong?

Found an answer in the following thread:
http://discussions.apple.com/thread.jspa?threadID=2152465&start=0&tstart=30

Similar Messages

  • V2.0 - Smart Playlists No Longer Working

    Hello all,
    The Shuffle Songs routine in V2.0 is just as bad as in V1.1. We constantly hear the same songs over and over and some songs we never hear. To solve this problem I was advised to create a Smart Playlist that would only play songs with a play count of 0. This worked great in V1.1 but does not work in 2.0.
    I am streaming through iTunes. Looking at the iTunes Smart Playlist, it is working correctly and removing a song once it has been played once. But no many how many times I reload that particular iTunes library, previously played songs are still being shown in the playlist when I select it on the ATV. And of course, ATV likes to play the same songs over and over again from it while on shuffle.
    Any suggestions?

    FYI...
    Reset ATV, no change... Deleted Smart Playlist and recreated, no change... Deleted Smart Playlist and recreated with a DIFFERENT NAME than before, it now works as before in V1.1.
    Go figure...

  • IPhone playlists no longer working - iOS 8.02

    Upgraded to IOS 8.02 last night.
    This morning on the commute to work my playlists are all 'greyed out', uneditable and I cannot create new playlists. Also, the shuffle feature has disappeared.
    Extremely annoying as no longer can listen to music on iPhone 5s.
    lm2

    What Troubleshooting steps have you tried...
    Have you consulted the User Guide with regard to your Settings = Sounds... etc...
    Mute Switch  = On or Off...

  • Smart Playlists no longer working on my 4G iPod

    I have a 20GB 4G Mono iPod that is running the latest firmware version (3.1.1) and I have several Smart Playlists I use frequently with it.
    Before I upgraded to iTunes 7 last week these playlists would dynamically update on the iPod itself without the need for me to synchronize with iTunes (this was also a bug introduced in firmware 3.1 and corrected in 3.1.1). Now the "smart" playlists on the iPod act just like static playlists: if I play a song that is supposed to be removed from the playlist once the song finishes, it doesn't until I sync with iTunes.
    Is anybody else experiencing this issue?
    I have tried restoring my iPod just in case.

    Well, 7.0.1 doesn't fix this for me, but downgrading to 6.0.5 did. I followed the first four steps here:
    http://macslash.org/comments.pl?sid=6335&cid=112858
    Then, while keeping the "iTunes Music Library.xml" file in ~/Music/iTunes, I made a new "iTunes Library" file (instructions at the bottom of this link):
    http://www.mani.de/en/software/macosx/ivolume/faq.html
    Then installed 6.0.5 and dragged the xml file onto the new program file to import. The new groupings (movies, podcasts, etc.) turn into playlists at the bottom, but can be easily deleted.
    This will allow downgrade while keeping play count, ratings, etc. intact; I did lose artwork for all the songs for which I had downloaded the art from iTunes store, and iTunes is recopying those songs to the iPod, but I'd rather have the playlists update on the iPod than have the artwork.
    iBook G4 1 MHz   Mac OS X (10.4.7)  

  • Why are my playlists no longer working?

    I tried updating iTunes to the latest version but still no luck. When I play a song on the playlist, instead of going to the next song when the first one ends, it will just stop playing music (kind of like when you reach the end of a CD). It's kind of annoying having to individually select each song I want to play, when I have them all in a playlist. I have tried both using playlists I had previously created (that used to work) and making no playlists, and both have not worked. Any ideas?

    Anyone at all?

  • Playlists no  longer work with my Alpine CDA-9887 Car stereo

    I updated to 2.2 and all of a sudden when i search for playlists on my stereo, the search button on the head unit doesn't do anything. It is not the head unit because i tried it with other other ipods just to make sure and it worked perfectly. I never had this problem until updating to 2.2. Anyone else experiencing this?

    I had the same problem when I bought my Iphone 3G. The 3g has a different charging system than the first gen.. Here is a quick work around.
    http://www.scosche.com/products/sfID1/210/sfID2/318/productID/1667

  • Podcast favorites no longer work

    My atv2 won't play podcasts from favorites anymore. Worked great for a while and then it shows connecting to iTunes and just keeps spinning. Everything else works fine. I can get podcasts to work by searching for them manually but after saving them a favorites and trying to play them from the favorites menu it fails

    I have the same problem... It seems the favorite podcast list will never load up anymore.  It happened for me after applying the 4.2.2 update.  More frustration.  I'm trying to figure out how to clean off the favorites list and try something else, but it looks like the only way is to perform a factory restore to wipe everything out.
    Now that I think about it, I had other updating problems with it as well with the last update and ended up having to restore/reset several times.  Maybe updating is not a good thing to do?

  • ITunes 10.1 - Shuffle function no longer works correctly

    The shuffle function on playlists no longer works correctly since the most recent iTunes update.
    It will periodically stop playing without playing the entire playlist. It is a real hassle and kills the mood as you have to go back to the Mac and click play again. Please fix this issue as it is a very basic function.

    Thanks for letting us know, however, this is a user to user forum and not an "Apple Run" forum.
    You need to report to Apple via:
    http://www.apple.com/feedback/

  • Blog page no longer works, mp3 now mov

    I recently changed computers to a new iMac. After updating my podcast/blog using iWeb 2.0.4, at least three problems have occurred:
    1. some (not all) of my .mp3 files appear .mov files at iTunes
    2. the archive of the podcast page no longer works
    3. the blog page doesn't work
    When you click on the blog page, it returns this error message:
    # Exception: TypeError
    # Message : Value undefined (result of expression $(parent).select) is not object.
    # File : BlogSummary.js, Line:147
    http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=286040700
    http://www.godwhisperers.com/TheGodWhisperers/Home/Home.html

    OK. Here's what I did based on the recommendations above:
    1. I reconverted all the audio files with VBR. This seems to have stopped the conversion of .mp3 files to .mov video files.
    2. I reconstructed my blog. In hindsight, this may not have been necessary in view of #3.
    3. I published the site using File<Publish All to MobileMe. This took a LONG time; best leave it for an overnight exercise if you try this at home.
    Upon awakening in the morning, lo and behold my site and its archives had returned! The only thing that didn't work was my iTunes link, which returned the news that my podcast was not available in the US store. I was using the short link as per the tech spec:
    <a class="jive-link-external-small" href="http://">http://www.itunes.com/podcast?id=286040700
    This one works, however::
    http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=286040700
    So it appears that Publish All is the trick when moving up to iWeb 2.0 from 1.0. And VBR seems to keep audio files as mp3 files, for reasons I do not understand. Thank goodness this was a relatively new podcast site with only 12 episodes.
    If anyone has an explanation for the iTunes glitch above, I'd be most appreciative. I'm going to keep this thread alive until I post another episode to see what happens.
    Thanks for the help so far.

  • Can I create a smart podcast playlist for my iPod?

    I'm trying to find a way to create a smart podcast playlist that will work on my iPod. I'm able to do this in iTunes, but when I sync my iPod, the playlists don't transfer. Right now I've got two playlists in a new folder, and I can't even find the folder under my playlists tab in my iPod.
    I've seen some pretty lengthy work-arounds that require you to create a separate playlist for each podcast, and then combining all of those playlists together into a new playlist. But it can't be that complicated, can it?

    Thank, that took care of it. I guess I just assumed that I'd be able to organize podcasts in the folders under the Playlist tab. It's weird that it won't let us do that.

  • My iPod Classic will no longer allow me to create podcast playlists.  I've restored it twice.  What is the problem?

    My iPod Classic will no longer allow me to create podcast playlists.  It create music playlists.  I've restored it twice.  What is the problem?

    Is the problem that you can create them in iTunes, but they are empty on the iPod itself? If so, I had that problem, and the issue appeared to be that playlists that used MediaType=Podcast didn't seem to transfer. If, on the other hand, I gave all podcasts a Genre of Podcast, it worked better. In general, with the older iPod classic, I found that playlists based on MediaType didn't work that well.

  • Podcast background streaming no longer works after upgrade to iOS4

    Behavior of my iphone, streaming (click the title after searching for Dan Patrick podcast in itunes app)a podcast with old OS -
    (Don't strip out my asterisks as bullet points, silly web editor) 1- When a podcast starts streaming, you may click the lock button and audio continues
    2 - You may also click home button and access mail, sms, maps, and notes without the audio being interrupted
    3 - If you access another app that stops the audio playback, re-selecting the itunes app will take immediately you back to the quicktime-looking player (about %80 of the time), although paused position in the podcast may be lost. Most of the time, double-clicking the home button and pressing play will restart the podcast where it was (if more than 5 minutes hasn't passed).
    With iOS 4 -
    1 - If you start to stream a podcast, and click the lock button, playback stops
    2 - If you click the home button, playback stops
    3 - If you receive a text message, and attempt to reply, playback stops
    4 - If you do any of the above, or access an app that is expected to stop playback, returning to the podcast with the itunes app no longer works. Half of the time you are returned to the search results, forced to click the title again (although remembering position is much improved), but many times you are taken back to the generic landing page, and made to search for your podcast to stream again. Double-clicking home and pressing play does not start the podcast like it should, instead it picks a random ipod song.
    Please tell me this is a malfunction, and not an "enhancement"?
    Message was edited by: docawkward

    Got my iPhone 4 last night - same problem. Anyone find a solution yet, or do I just have to live with it?

  • Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.  I can CREATE the list but, the songs that I have played don't accumulate in the list.  I haven't changed the steps that worked for me previous to the upgrade.  I have no idea

    Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.
    I can CREATE the list but, the songs that I have played don't accumulate in the list.
    I haven't changed the steps that worked for me previous to the upgrade.
    I have no idea how to fix this and can't find mention of anyone else having a similar problem.
    Any suggestions?

    Click on a station and drag to the left. The playlists sidebar will open up. Drop on the playlist you want to add to.
    tt2

  • I created a playlist with 100 songs.  I want those 100 songs played using the shuffle option.  This no longer works in iTunes version 11.1.5.5  How can I get an entire  playlist to paly one song after another by using the switch option?

    I created a playlist with 100 songs.  I want those 100 songs played using the shuffle option.  This no longer works in iTunes version 11.1.5.5  How can I get an entire  playlist to paly one song after another by using the switch option?

    You're welcome.
    Going back to your original post:
    5) Tried running Itunes in 'safe mode', running itunes as an administrator..nothing.
    Was that iTunes' safe mode as opposed to Windows' safe mode? iTunes safe mode is invoked by holding down CTRL+SHIFT immediately after clicking the icon to launch iTunes and continuing to hold until this message pops up:
    Click continue, then close iTunes and reopen. With luck iTunes now opens normally every time.
    tt2

  • Why do podcast album view links no longer work in iTunes 11?

    I've recently updated to iTunes 11, and now the podcasts I have that contain links no longer work. What can I do?

    Duplicate your copy of iTunes 10.x before upgrading to iTunes 11 (or restore it from a backup) and use iTunes 10.x to listen to (and in particular access the links in) podcasts. Further, file a bug with Apple that these links don't work when the album art is displayed in the album art mini-player.

Maybe you are looking for

  • 0x2D becomes 0xAD after upgrade from 8.5 to XI 2

    We used to use Crystal 8.5 to create reports with embedded email commands for use in eDocPrinterPro, which converts the report to .pdf format and attaches the resulting .pdf document to an email, with an email address as specified in the embedded com

  • Dateofbirth and start date not same for infotype 2

    Hi Gurus, Recently we have applied supportpacks for 4.6c  in development.I am testing for hiring action.What i observed is end date for these infotypes changed to 31.12.1999 instead of 12.31.1999 and in infotype 2 employee dateofbirth  and start date

  • Assignment in Configuration Scenario Disabled

    Hello, I have difficulties in configuring the configuration scenario. This Scenario previously runs normally, and so is other scenarios existed. But this day this unwanted condition happen, suddenly, last action i did was add new component to the Bs.

  • ORA-15072

    Hi, Using 10GR2 on RH4U3 (x86) . Does anyone knows why this error occur? I am trying to create a diskgroup without failure DG using hardware redundancy. Thanks a mil... # /etc/init.d/oracleasm listdisks VOL_ARCH VOL_DATA SQL>create diskgroup ODATA ex

  • Set up iPhone from iCloud backup

    Advice needed please. My current iPhone 5s on ios8.1 is backed up to iCloud and I will soon need to set up a second 5s but will be in a country with very slow internet and intermittent connection and no access to my iTunes. What I would like to do is