Podcast Subcategories not displaying correctly in store - Anyone else?

Currently when drilling down into the iTunes store into podcast categories the browsable view is missing. I'm getting an "old fashioned" category style view rather than the nice browsable view with "New" and "Featured" and "Top Podcasts" etc. Is this problem unique to me or are others experiencing it as well.

I'm having this problem again. It started last night and is still doing it this morning. Is anyone else experiencing this problem?
Apple Support - please note I am not just describing the new look of the subcategories. I produce top 100 podcasts and am very familiar with how the subcategories should look.

Similar Messages

  • IWeb Podcast Art Not Displaying in iTunes Store

    I recently submitted a podcast to iTunes, and so far it has been displaying in the store fine. However, I cannot figure out how to make iTunes display the art for the podcast. I just used iWeb to make the podcast, RSS feed, and submit it to iTunes, and though I'm fairly technically proficient, web coding is not my area of expertise.
    here's a link to the site: http://www.worthbak.com/the5_30podcast/podcast/podcast.html
    and here's a link to the podcast in the store: http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=330042373
    any and all help would be much appreciated!
    thanks,
    worth

    I'm having sort of the same problem. My podcast (which is done through iweb) was just put into the itunes store and when you search it there's no artwork, but after you click on it, the artwork shows up. It's just not coming up in the search. Should I wait? Or is there something I can do to get my artwork up?
    This is the url: http://web.mac.com/amrodgers/iWeb/Sara%20and%20Aimee%20do%20Glee%21%20A%20Glee%2 0Podcast/Podcast/Podcast.html

  • HT1688 Since updating to iOS7 my iPhone 5 will not charge correctly.  Is anyone else having this problem?

    Since updating my phone to the new operating system my phone will not charge most of the time.  It shows that it is charging but the battery percentage decreases rather than increases.  Is anyone else having this issue?

    Are you using a non-Apple Lightning cable?  iOS 7 added controls to prevent non-branded Lightning cables from working.
    If you're using a genuine Apple cable then perhaps try a Reset of your iPhone.  If that does not help, then do a backup and full Restore and reload your backup.

  • I recently applied software updates for Mountain Lion (10.8.1) and  9.1.8 to Logic Pro and now Logic Pro is not operating correctly. Has anyone else experienced this same problem. (Mac Pro Desktop, Mountain Lion).

    Need some help.

    Thanks. I added the supplemental and it looks like I may be back to normal here. I will have to fully check it out but Logic is opening up correctly and no weirdness so far.

  • Podcast episodes not updating correctly in iTunes

    Hello,
    I am having a problem with my podcast episodes not updating correctly in iTunes.  The last 5 episodes I published appeared in iTunes at the bottom of the episode list, as if they were old episodes--i.e., they appear as if they were the first 5 episodes published.  They also do not have a date assigned to them as the rest of the episodes do.  They were not distributed to podcast subscribers, possibly because iTunes is not recognizing them as new episodes.
    Here is my podcast feed: http://ic.instantcustomer.com/instantcasts/feed/podcast/5047174b90f14efe542431c2 674b1bd9
    And here is the link to my podcast in iTunes: https://itunes.apple.com/us/podcast/small-business-marketing-minute/id896451432
    The problem began with last Wednesday's episode, which was Episode 30, and has continued ever since.  I did not do anything differently when I published that episode than I did when I published the previous 29 episodes, and those updated just fine, or at least seemed to as far as I could tell (i.e., they appeared correctly on iTunes, and appeared as a new episode for me as a podcast subscriber).  Also, after examining the rss feed, I could not see any difference between episodes 1-29 and episodes 30--34, at least as far as the way the feed was formatted.  So, I have no idea what triggered the problem, and no idea how to fix it.  If I can't resolve the issue then I think I'll have to abandon the podcast, since there's no point in publishing a podcast that doesn't distribute new episodes to subscribers. 
    If anyone can shed light on this problem for me, it would be most appreciated.     Thanks!
    -Kevin

    As you say, in the Store the latest episodes don't show a publishing date. When subscribing in iTunes, none of the episodes show a publishing date, and they are listed in the order they appear in the feed.
    In the feed, none of your episodes has a 'pubDate' tag, which is where iTunes gets the date from. Since most of the episodes in the Store have a date, it looks as if originally your episodes had this tag, but that five episodes back you did something in whatever method you are using to create your feed which removed these tags: the Store is presumably getting the dates from its cache since the episodes haven't changed, but obviously doesn't have the dates for the last 5 episodes.

  • Date can not display correctly in excel from .jsp

    Hi,
    I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
    for example in database :start date ='01-oct-2003'
    in the except it displays to 02/06/02.
    It seem all the date field can not be control in the report, and control by somthing else
    Doese anyone come accross this problem?
    Thanks

    Hi Rong,
    Are you using the following demonstration to build your JSP?
    http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
    (Output to Excel with Oracle9i Report)
    I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
    While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
    However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
    Pl try it and let us know.
    Navneet.

  • When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

    When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
    i am on a Windows 7 professional PC, 64-bit.

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Search for member activities - points are not displayed correctly

    Hi experts,
    I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
    Can anyone tell me why the points in the result list are not displayed correctly?
    Thanks and best regards
    Anne

    Sometimes threads are deleted if they violate the Rules of Engagement.  If that happens, you'll lose points that were allocated to you.  Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this.  I'd guess, it's more likely you'd responded to a post that broke the rules.
    Really important
    1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable). 
    2. Don't ignore rejection emails or other communications from moderators.  They are followed up, and, if warnings are ignored, then accounts will be deleted.  Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
    matt

  • Flash movie not displayed correctly in IE 8 on some Windows OS

    Has anyone seen this problem?
    I'm using CS4 to export a basic flash movie with embed tags pre scripted...
    And the issue is that on some OS systems using Vista or Windows 7 and IE 8 as a primary browser, it appears that IE 8 is not displaying the flash banner completely.... its CROPPING it off... This is very strange because the banner works fine in FireFox, IE7,Opera,Chrome but not I.E.8 on some OS systems...
    If you google "Flash not displaying correctly in IE 8" you'll get alot of people with the same issues but no real definate fix...
    Are there any suggestions as to what i could try?
    Do i need different flash embed tags? Or is this a user issue?
    Please Advise as soon as possible...
    Thanks

    I'm sorry, i forgot to explain that I didn't upload the flash published html because it did and produced the exact same results.
    The flash published still got cropped off on 1 vista os(I.E 8) running from a laptop and 1 windows 7(I.E. 8) latop os...
    Its good to hear that you're able to see it clearly... however in my QA efforts, i've been asked to fix the issue or drop the flash banner all together.
    I've tried every which way, i've even converted the embed tags (not uploaded by the way) to a js script and it STILL gets cropped of on 2 ie8 run OS systems...
    And now i'm not sure what else to try on my end.
    I'm currious if because this is an XML driven flash banner, this may be an issue? But it still doesn't explain why some people can see this in IE 8 as you can and others get a cropped banner like in my screen shot sample.
    Again i invite everyone in the forum to take a look at the sample links, as i'd be curious to see who else is seeing this.
    By the way "kglad" Thank you so much... please keep the suggestions coming... but everything you've suggested, i've tried.
    This is very perplexing. Is this a setting issue? or is there some setting on the user side i'm not aware of? Either way, as usual... the flash developer is blamed so i must find a solution.
    Link to flash sample
    http://www.extremefx.net/flashie8issue/flashtest.html
    Link to screen shot sample on a Vista and Windows 7 running IE 8 browser
    http://www.extremefx.net/flashie8issue/ie8issue.jpg
    Again... eagerly await feed back from you and the rest of the forum.
    Message was edited by: RegGFX

  • JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

    (Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
    I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
    After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
    Re: JPG images not displayed correctly in Bridge and Photoshop 

    xxxxyyyyz wrote:
    …If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
    That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
    Just get it it out of the way, here's my setup:
    Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
    I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve.  Unequivocally and without qualifications.
    Now, first things first:  Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites".  Concentrate on Photoshop.  Do not try to use Bridge to synchronize anything.
    The "suites" are a totally artificial construct created by Adobe bean counters and marketing types.  The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries.  They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
    Enough said about the cause of the problem.  The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
    Secondly, a disclaimer:  I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius.  I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point).  I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it.  I believe my monitors are the foundation of my color management efforts.
    Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle. 
    Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software.  Stick to version2 icc profiles.  Ask the manufacturer of your calibration software/hardware if in doubt.
    Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
    In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site.  I have learned from all of them.
    My working color space is ProPhoto RGB.  I choose to work with PSD and PSB files.  As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web.  My main output consists of prints.
    I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
    Following is a screen shot of some of my pertinent settings:
    Note that I have never bought into the "suite" concept myself.  I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
    Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
    Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
    One big caveat, do not fall into this trap:
    xxxxyyyyz wrote:
    …I believe my problem has nothing to do with my monitor profile, for several reasons, but…
    …It seems extremely unlikely to me that…
    You either want to learn, or you don't.  You either want to solve your problems, or you don't.
    When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere.  That attitude will get you there fast.  Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
    Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong.  You see, I am not experiencing any problem that needs fixing.  I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
    Good luck.
    Wo Tai Lao Le
    我太老了

  • Text on some pages not displaying correctly since Lion upgrade

    Since upgrading to Lion a few days ago, I find that the texg on many web pages does not display correctly. It appears to affect mainly header texts - all I get is a row of the capital letter "A" in boxes. I am running Safari Version 5.1 (7534.48.3) on Lion 10.7 Build 11A511.
    Can anyone suggest a fix for this?

    Try here >  All I see is the letter "a": Apple Support Communities

  • Some Websites do not display correctly (i.e. Facebook & Mozilla Page)

    Recently when I visit Facebook and the Mozilla Page on my Desktop Computer (I am writing this on my laptop because this website does not function on my PC) using Firefox, the pages do not display correctly. Instead of the Facebook page appearing in it's usual blue-coloured format it shows as lines of text (not HTML code, but just lines of text, such as "Connect with friends..." in a different font than it should, its all black and white, no colour). Also the top of the screen has written "Facebook Logo" in blue underlined italics instead of the actual logo.
    Does anyone know what may be causing this problem? If so, could you provide me with a solution? I have already tried several support topics (i.e. clearing cache, cookies etc.) but this does not help.
    Please tell me if you require more detail or wish for me to elaborate/describe my issue in an alternate way.
    Thank you very much.

    Here is a screenshot.

  • Color gradients not displaying correctly

    I'm having an issue with my color gradients in type and objects not displaying correctly in the content viewer. For the last app I created, I made sure the colors were RGB and that seemed to fix it. With the current app I'm working on, that dosen't seem to fix the issue. Actually, when I test in the viewer on my iPad, it shows the correct gradient in the split second that it's loading the update but then once it's loaded, it goes to a gray white gradient (the correct gradient is from a yellow to a gray; attached a pict for referrence).
    Anyone know why this is happening? Thanks in advance!
    UPDATE: It seems to view fine if I preview the page via the foilo overlay but when I preview the folio, that's when it's no viewing correctly.

    The Color Picker is unreliable for choosing colors based on what you see because it is not color managed while Color panel and Swatches are.
    In your image, the color that you see in the Color Picker is how your monitor displays R=0 G=255 B=0. The color that you see in the Color Panel represents the same values in the file but the color management sends different values to the video card and thus to the monitor to display a color with appearance in the color space selected for the document. In your image this is a CMYK color space which you can check from the Show popup menu at the bottom left of the document window. To check the different values the video card is using, make a screen capture, save the image, open it in Illustrator and measure the color with the eyedropper. The color translation from the values in the file to the video card allows simulation of color spaces other than your monitor's. This simulation is accurate if you have a monitor profile installed in your system that correctly describes how your monitor displays colors. Such profile is created by using a color measuring device and profiling software. If your monitor profile (color space) installed in the system is the same as the color space of the document then there will be no translation (simulation) which in effects shuts down the color management - then the colors in the Color Picker will be the same as in the document. Many people do not bother to get an accurate profile of their monitor and use a generic sRGB profile for that. In such case working in RGB color mode using the sRGB color space (default in the Color Settings) will give the same colors in the Color Picker and the document. This usually is a sign of using a monitor that incorrectly displays colors.

  • Colors in pdf files not displayed correctly on linux acroread

    I have recently observed that the colors in certain pdf files are not displayed correctly in acroread on Linux. Other readers such as evince get it right. Examples are a presentation with white arrows on  a black background which come out as black on black. I suspect, but have not proved, that the files were produced on Mac OS. I see this in acroread version 9.5.1 on a couple of versions of Linux. I googled this but could find no-one else mentioning it. Has anyone else seen it. Looks like a serious bug to me.

    Does this happen with other PDFs on the server? You might check out the Adobe forums.
    Regards, Tim

  • Flash Animation: Font Not Displaying Correctly

    Hi all!
    I am having a problem with a Flash animation in Captivate that seems like it should be an easy fix, but I can't seem to figure it out.
    I have a very simple Flash animation that I developed in CS5. It previews in Flash perfectly, play correctly in Flash Player, but when I insert it into Captivate 4 the fonts do not display correctly. Capital letters are missing as well as other letters.
    It's not a matter of AS2 vs. AS3 as I have already tested that. It also is not a frame rate or version issue as I have confirmed they are the same rates and the same version.
    Can anyone shed any light? Anyone else had this same problem? Any guidance or suggestions would be much appreciated.
    Thanks!
    Daniel
    Screen shot:

    Hi dmendoza2,
    Did you embed your fonts into the flash animation?  Make sure all characters necessary are embedded.
    Jim Leichliter

Maybe you are looking for