Podcast won't export from Garageband to iWeb

Hi all
Help appreciated with this. I do a two hour music podcast (www.whatyouwantradio.com also available at http://soundcloud.com/whatyouwant-radio) which is created in Garageband and then exported to iWeb for uploading to my website. I've been running this, with few problems, since April 2009.
Recently the garageband podcast won't export to iWeb. It's random, and I seem to have been able to bypass it by changing the filename slightly, or adjusting the quality at which it is exported (I like to export at 320mps for best quality - big files but no complaints from the 100 or so listeners. Could be more - who knows as I can't get stats from iTunes. But I digress). However, the most recent podcast, which is already available on Soundcloud, just won't export. It goes through the motions (mixdown etc.) but nothing appears on iWeb on the other side. No error message, nothing. I know that memory has also been an issue in the past but right now there is plenty to spare (5.37GB at last glance).
I'd really be grateful for some help on this, I'm at a bit of a loss - no error message, no clue. As I say, this podcast has been going for nearly three years and it's only recently I've had this problem.
Cheers,
Stuart
Mac OS X 10.6.8
Garageband '09 5.1
Model Name:
MacBook
  Model Identifier:
MacBook5,1
  Processor Name:
Intel Core 2 Duo
  Processor Speed:
2.4 GHz
  Number Of Processors:
1
  Total Number Of Cores:
2
  L2 Cache:
3 MB
  Memory:
4 GB
  Bus Speed:
1.07 GHz
  Boot ROM Version:
MB51.007D.B03
  SMC Version (system):
1.40f2
  Serial Number (system):
W8912A098QT
  Hardware UUID:
CE258311-95FB-5BB2-BF43-DC494598B584
  Sudden Motion Sensor:
  State:
Enabled

Just a further note on this. I tried a couple more times yesterday to export the file. Starting out with over 5GB of memory, by the time I had tried twice this had gone down by a couple of GB. Still no export. This morning I noticed some new files in the trash that were from around the time of the failed exporting:
Note sure if you can see that, but I'm guessing the files are something to do with the failed export? Does anyone have any thoughts? Either way, this problem is still annoying the **** out of me...
Stuart

Similar Messages

  • Podcast won't import from Garageband

    Hi all
    Help appreciated with this. I do a two hour music podcast (www.whatyouwantradio.com also available at http://soundcloud.com/whatyouwant-radio) which is created in Garageband and then exported to iWeb for uploading to my website. I've been running this, with few problems, since April 2009.
    Recently the garageband podcast won't export to iWeb. It's random, and I seem to have been able to bypass it by changing the filename slightly, or adjusting the quality at which it is exported (I like to export at 320mps for best quality - big files but no complaints from the 100 or so listeners. Could be more - who knows as I can't get stats from iTunes. But I digress). However, the most recent podcast, which is already available on Soundcloud, just won't export. It goes through the motions (mixdown etc.) but nothing appears on iWeb on the other side. No error message, nothing. I know that memory has also been an issue in the past but right now there is plenty to spare (4.04GB at last glance). However, I am noticing that the memory is going down everytime I try an export, so I am figuring the .band file is going somewhere i.e. taking up space
    I'd really be grateful for some help on this, I'm at a bit of a loss - no error message, no clue. I've also posted this on the Garageband forum. As I say, this podcast has been going for nearly three years and it's only recently I've had this problem.
    Cheers,
    Stuart
    Mac OS X 10.6.8
    Garageband '09 5.1
    Model Name:
    MacBook
      Model Identifier:
    MacBook5,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2.4 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    3 MB
      Memory:
    4 GB
      Bus Speed:
    1.07 GHz
      Boot ROM Version:
    MB51.007D.B03
      SMC Version (system):
    1.40f2
      Serial Number (system):
    W8912A098QT
      Hardware UUID:
    CE258311-95FB-5BB2-BF43-DC494598B584
      Sudden Motion Sensor:
      State:
    Enabled

    Can you export as MP3 or AAC and drag it from Home Folder/Music/Garageband into iWeb?
    Better still, upload the file to your server and use a fallback player so that those that don't have the QuickTime plugin can hear it.
    http://www.iwebformusicians.com/Website-Music-Players/Flow-Player.html
    http://www.iwebformusicians.com/Website-Music-Players/JW-Audio-Player.html
    http://www.iwebformusicians.com/Website-Music-Players/HTML5-Audio-In-A-Box.html

  • IPod music player crash when playing podcast, exported from GarageBand

    Hello!
    Before start, I'm using this soft/tools: GarabeBand '11 (6.0.4.) on Mac OS X(10.7.2.), podcast, submited in iTunes, and iOS 5 on my iPod Touch 4. All software is up to date.
    So. I have a podcast which Is playing fine everywhere, on Mac, iPod etc. But the latest episode I did yesterday, I made with GarageBand to try "Chapter Marks" feature which I did not used before. Then I export podcast to my Mac and upload to my server to make available in iTunes Store as I usualy do.
    Then I downloaded latest episode of my own podcast in iTunes, transfer it to iPod, and found that this episode cannot be played on it! I mean, it transfered well, it shown in episodes list of my podcast, but when I tap to play - music player app just crashing all the times. All previous episodes works fine, so I guess the problem with latest episode is because of GarageBand.
    I've tried many different export settings in GarageBand: AAC Encoder with Higher Quality (192 kbps), iTunes Plus (256 kbps) and Custom settings 320 kbps. Also I tried all options in "Quality" dropdown menu in Custom settings: High, Higher and Highest.
    But result is still same - this episode, exported from GarageBand, crashing on iPod (although It can be played normaly in iTunes on my Mac).
    Would be glad for any suggestion how to solve this. I feel very bad cause subscribers of my podcast downloading "broke" episode :-(
    p.s.
    Here is podcast in iTunes Store - http://itunes.apple.com/ru/podcast/daniel-lesden-presents-rave/id423519688
    Here is RSS feed - feed://ravepodcast.com/downloads/podcast.xml
    The problem with latest episode, #017.

    I examined the episode media file. In QuickTime Player 7 it shows the chapter images, which are 160x160, and plays normally.
    However in QuickTime Player X it doesn't show the images, but opens to a very large black player. The info in QT7 looks like this:
    You will notice that although at the bottom it says 'Normal Size 160 x 160 pixels', in the top section it refers to a JPEG at 6227 x 6227 which I suppose is an embedded image, though I can see no evidence of one (unless it's plain black): an image this size wouldn't show on an iPod and would very possibly crash it.
    I can't explain how this got there - I've never used GarageBand to make a podcast - but you should have an investigation and try to locate and remove it; it's very likely the cause of the problem.

  • My podcasts won't download from the computer to my ipod touch all of a sudden!

    All of a sudden my podcasts won't download from the computer to the ipod touch anymore.  It still downloads changes in music and apps, but it just seems to be podcasts.  Can anybody help me diagnose my problem?

    If they are video podcasts, they now appear in the Video app after iOS 5.

  • Best settings to Export from FCP to iWeb?

    In the past I have exported from FCP to a QT that I import into iMovie and then export from iMovie to iWeb...
    is there a simpler way to get video to iWeb?
    I prefer not to edit in iMovie, so what FCP settings are best for iWeb? I'll ask this on the FCP board as well.
    Thanks

    In the past I have exported from FCP to a QT that I import into iMovie and then export from iMovie to iWeb...
    is there a simpler way to get video to iWeb?
    I prefer not to edit in iMovie, so what FCP settings are best for iWeb? I'll ask this on the FCP board as well.
    Thanks

  • Itunes wont play my new mp3 exported from Garageband?

    I export my original songs from Garageband 09 in mp3 format and add them to a playlist in itunes. Sometimes Ill make some changes to a song in Garageband and then export and replace the original exported mp3 with the same file name. The preview in Finder plays the new version but when I double click it or open it with itunes it plays the old one? Even when I delete the old one from the playlist and import the new file? Weird!

    I have a similar problem .. when I import a movie, modify the audio track add sounds and music ect... export to iTunes only the original movie audio comes thru. When I check the file in the iTunes movie folder it has the Garageband sounds as I modified it. Opening the movie in Quicktime it plays the total Garageband mix. I suspect a glitch in iTunes.

  • Audio exported from garageband inaudible

    Hi everyone,
    I'm new to garageband and have just hooked up a sony notetaker to my macbook pro and have used garageband to import the audio. Once it imported I listened to some of it and it sounded okay but when I chose "send song to iTunes" and listened to the audio there, it was playing back in "chipmunk" mode, ie. really fast, totally inaudible. Just wondered if anyone could tell me why this is happening?
    Also, is it possible to export audio from garageband in an mp3 or .wav format?
    Appreciate any help.

    Thanks for the reply.
    The Q&A you directed me to is about a file playing too fast within Garageband. My file is actually playing correctly within Garageband - it's playing too fast in iTunes when I export it.
    I tried it anyway though. Since the file was already in the iTunes window, I just set the preferences to AIFF, 44.1K and 16-bit as directed in the instructions. The file was already a .aif file since exporting it from GB but again I chose "Convert to AIFF from under the Advanced menu" according to the instructions.
    Apparently once the conversion is done a new file should have been created and listed in the iTunes window, but no new file was created when I did this. Do you know what could have gone wrong?
    Also I imported about 1 hours worth of audio from the notebook into GB but when I exported it to iTunes it's coming up as over 11 hours. Do you think some setting was wrong in GB while I was importing that could be causing the problem?

  • IPhoto won't export from some folders.

    I'm trying to get all my previous iPhone photos sorted into year groups so that I can import them as Albums into my shiny new phone.
    In iPhoto I created five folders labelled by their year and pulled images into the respective folders.
    I dock my iPhone, and in iTunes I select the folders I want to import from, however, iTunes tells me that some of those folders are empty.
    I go back to iPhono and attempt to export from the suspect folders, and this cannot be done, either by File> Export, or by simply dragging nd dropping. The OK folders behave normally.
    Why do I see images in folders in iPhoto, but I'm unable to export them?
    Any clues welcome.

    In iPhoto, Folders cannot contain Photos. Albums and Events contain photos. Folders can only contain Albums or nested folders.
    So are you referring to Albums or Events?
    Anyway these photos won't sunc because iPhoto can't find them. In the case of the message you're getting it sounds like you Referenced them when importing.
    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management. 

  • TS2743 My podcast won't download from iTunes for anyone, anymore

    Hi guys! I am the owner/host of Dorktown Podcast. Sadly most listeners (me included) are not able to download our shows off of iTunes. It has been on there for seven years and has been fine previously and nothing has changed from the feed. You can stream it but it won't download. The podcast feed and files are fine as they work on all other formats (including Stitcher). There is plenty of space on peoples phones or computer for the download.I
    When I report the problem directly on iTunes it keeps telling me I've 'timed out' after I send the report even though it's only taken me seconds to paste the report and send it.
    Please please please I hope somebody can help as it's driving me crazy that people can no longer download off iTunes.
    Thank you! -Mike

    I subscribed to the URL http://www.walkingoliver.com/pak/wopodcast_xmlfeed1.xml in iTunes and episode 8 started downloading successfully. So perhaps the problem is solved?

  • My podcasts won't sync from iTunes to my iPhone

    I had been downloading podcasts onto iTunes, with several on auto-subscription, with any new ones auto-transferring to my iPhone each time I plugged it into the laptop via USB.  A couple of days ago, I noticed that no new podcasts were showing up on my phone, checked iTunes against the ones on my phone and saw that several new ones on iTunes hadn't transferred.  I tried a manual sync, which did not work - new episodes visible on iTunes but not on my iPhone.  I tried going into the "Get Info" menu for an individual podcast, as mentioned on one of the other threads, to make sure that it was being recognized as a podcast rather than music or another medium - no change.  I tried advice mentioned in another thread (the user who suggested it readily admitted it was a temporary patch job), of adding all past, present and future episodes of a podcast to ensure I get new ones; I saw old podcasts that I had previously deleted, now eligible for download from the cloud, but none of the newer episodes that I had not yet been able to download.  The iPhone is a 5S, and software on iPhone, iTunes, the laptop (Macbook Pro, uncertain version) and the Podcast app have all been updated since this problem started as part of my attempt at fixing it.
    Any other ideas for things I could do or try?  I can't recall updating any component in the chain (laptop, iTunes, iPhone) recently, nor have I changed any equipment, any iTunes settings, any phone settings, or otherwise.  These podcasts are a big part of what gets me through an hour and a half commute to work each morning, so any advice you can give would be greatly appreciated.

    Here's what I think happened because I am in the middle of it right now.  I just bought a ton of videos and also updated my software. I think Apple cleverly decided that now you can not update it without now paying for the Icloud feature that allows you to share all your devices.  You have to click Itunes match, I have never seen it before but when I clicked on it it was 24bucks.  This is actually pretty lame in my opinion because it moved all my stuff off my ipad on to my imac and now im paying another 24 bucks to get it back where I wanted it .

  • Problem exporting from Garageband 08 to iDVD 08

    I used Media Browser to aid me in creating Chapters in my movie in Garage Band 08 (version 4.1.2). The movie plays well under Garage Band. When I then use the Share menu item, "Send Movie to iDVD" to export to iDVD 08 (version 7.0.3), I get the following message. "There was an internal iDVD error during the last action. This is not a movie." Well it certainly looks like a movie to me so I must have a settings error somewhere. Does anyone know what that might be. Thanks.

    Under "Applications" select "Utilities" select "Disk Utilities" then open and repair disk permissions.
    Do a search For Garageband. Put the files that end in ".plist" and ".cs" in the trash. Restart the computer, and try GB again (it re-creates those files on start up).
    Hope that helps.
    X

  • Could someone please answer my question re: exporting from garageband?

    Hi,
    I just recorded a video on my iMac computer using skype and call recorder and it automatically saved the video into garageband. My question is how do I export the video that is in garageband to either "soundtrack", "FinalCut Express", "iMovie" or is there some way to upload the video directly onto YouTube?
    thanks for your help,
    Lorna

    http://www.exterminate-it.com/malpedia/remove-alot
    http://www.ehow.com/how_5108594_remove-lot-toolbar.html

  • Why does my mp3 exported from garageband sound hollow and tinny when played through other speakers?

    The recording sounds great through headphones from the mac and headphones from my phone but listen to it through speakers from my phone and it sounds hollow and tinny. I've made other recordings that sound full and rich. Any ideas?

    fbuerg,
    You are welcome. Glad my good fortune was helpful to you.
    Time Keeper

  • Aperture 3 won't export from "Faces"!?!

    Hi Guys,
    I 99.9% sure this is a simple fix problem.
    I have tagged someone in several hundred photos and now I want to export all those photos in one go. I go to
    Library > Faces > Alex > Select All > Shift-cmd E
    Nothing happens!
    I get no warnings, no processing messages no error messages.
    When I go to Library > Photos > The first photo > Shift-cmd E I get the export wizzard as normal.
    What am I doing wrong?

    I don't know why your approach does not work - but as a work around:
    For me worked the following:
    Create a smart album
        add a rule: face contains   "the name of your friend"
        then select all pictures in your smart album
    and export them
    I tried it in Aperture 3.1.3 and it worked fine
    Leonie

  • My script won't export.

    My script won't export.

    I had to switch browsers, to Firefox, it won't export from Safari.

Maybe you are looking for

  • Open Item - Line Items

    Hi Gurus, I have to configure a cube (or more than one) to extract data from R3 to : 1-Open Items by Customers with a key date 2-Cleared Items by Customers I've never configured AR and i want to know if you can give me any advice about it : - to open

  • Epson Stylus NX430 will no longer print!

    I recently changed internet providers and purchased a new Netgear router.  Up until then, I have had no problem printing from my Macbook Air to my Epson Stylus NX430, but now when I try to print I get an Error message! I have emailed back and forth w

  • 3429 - Won't detect Networking Devices (And can't manually force drivers)

    Got an "old" 3429 from a friend who's been using it at their office for a few years - Did a complete re-format and installed Windows 8 on it. But now it won't detect any of the network hardware (Ethernet OR Wireless) and I can't get it installed manu

  • AD migration

    I've got a windows 2008r2 server with SQL server 2008, with the following roles and feature active in it AD service, DNS,IIS , DHCP, Hyper-v, Routing and remote access etc and other relevant features. Two days ago my system(server) crashed leaving my

  • Custom ItemRenderer Problem

    Hello, I have a requirement to display an image in some rows in the datagrid based on a flag obtained from the database. To achieve this, I am using a custom itemrenderer for that particular column and on a simple check if the value obtained for that