Podcast won't load

I apologize if this has already been addressed, I couldn't find anything.
I have created a podcast at:
http://www.thecreationshop.com/category/blog
and built my first enhanced podcast with GarageBand. I believe I have done everything right because the m4a file plays fine in iTunes but when someone subscribes to the podcast, the file downloads and then disappears. It's as if it never downloaded at all. When I click on the "!" I get the iTunes can't play the file or it is corrupt. I know that isn't the case. I have uploaded the file several times as well as downloaded it directly from:
http://www.thecreationshop.com/podcast/Blogging101.m4a
and nothing!! I know I'm a newbie, but it shouldn't be this hard, should it? I can only believe I must have dome something wrong. Please help!
In advance... Thank You!!
Brent

BrentSpore,
Welcome to Discussions,
I don't have a solution for your problem, but did you take a look in the Producing Podcasts forum?
Posting there will probably give you an accurate answer or you might find one by searching the that forum.
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.2

Similar Messages

Podcasts Won't Load - I've Registered 15 Times - My iPod is Insane - Help!

I got a nano for Christmas and it's beautiful and I love it...but it appears to be every bit as insane as the shuffle it replaced and I need some help.
Whenever I plug it in it makes me register. I've registered many many times now.
I managed to load three episodes of several different podcasts (Democracy Now!, e.g.) and now that's all I get. Any attempts to sync or (in the manual mode) drag and drop new episodes are completely useless. How do I get new episodes of podcasts onto my nano?
I also have a problem where I've dragged over some video podcasts of Democracy Now! After the "drag" I got a message saying that my nano was syncing and that I shouldn't disconnect and then I watched for several seconds as the progress bar tracked the loading of the video. When I later disconnected and went looking for the videos, they don't appear anywhere. They're not under podcasts, music, movies, videos, etc. I've looked through every menu option. They're completely missing in action. When I tried to drag them onto the iPod again they simply won't load. It does nothing. I drag, drop, and that's it...done...no syncing, no anything.
Is my nano broken, or is one of us insane (I'm pretty sure it's the nano, but...)
Thanks in advance to anyone clever and patient enough to help me out.

I am in a similar boat and can't seem to find an answer searching through discussions. About 3 months ago one of my podcasts NPR: This American Life started acting all strange on my iPod. I had it all set correctly and worked fine for nearly a year. Then the podcast episodes wouldn't automatically load onto my video iPod. They are not in my Podcast section on the iPod. On iTunes it works fine - no problems. When I try to transfer the podcasts over manually in their NPR: TML folder it shows it transferring but when I disconnect they are not there. If anyone knows or has an idea please post. I have made a Playlist for this podcast but episodes mysteriously disappear after a week or so with no consistency. Weird! Thanks.

ITunes music or podcasts won't load

I can't download my iTunes content.
It shows up in iTunes but will not load into my iPod.

Hi John,
I have the same trouble. So I did a lot of stuff: deleting re-installing iTunes, deleting SC Info repertory, creating another administrator account, creating another iTunes account (to try to buy songs) ... and all of these hasn't fixed the problem:
I can open a session, but
- I can't buy new songs
- I can't "autorized" iTunes on my computer
- I can't read anylonger my very old DRM files (Fairplay2).
Any suggestions or help?
Thanks in advance.

ITunes Store won't load up!

Ok, please bare with me as this is a pretty convoluted problem and one I've fruitlessly wrestled with for a few days now.
The iTunes Store in iTunes won't load up and just gives me a never ending white page with the following on the page:
''One Moment Please.Connecting to the iTunes Store.Loading If iTunes doesn't open, click the iTunes application icon in your Dock or Windows Task Bar.''
Now I'm sure most will realise this is the holder page you'd get in your internet explorer when it pings iTunes with a store link to load, and it was when I clicked an iTunes link in Internet Exploroer 8 that this page first appeared in iTunes.
If I try to sign in, I get the (-50) unknown error, and despite all this I am abl to still comunicate with the store - if I right click on a podcast series I've already got in my libary and click 'Update Podcast' I can download podcasts through it giving me a list of undownloaded ones in the series listings in my podcast libary.
I've tried the basics; re-innstalling iTunes and restoring my system to a previous point, but nothing has rid me of this pretty deabilitating problem, and there's such a mmuddle of different problems like tihs it's hard to really get a grip on what's the issue when I'm searching here and elsewhere so I'm, hoping someone here would kindly lend me a hand and give me some directions!
I'll post a copy of a diagnostics run in my next post so you'll have all the information that's needed.

Microsoft Windows 7 Home Premium Edition (Build 7600)
Dell Inc. Dell XPS420
iTunes 9.0.2.25
QuickTime 7.6.4
FairPlay 1.5.23
Apple Application Support 1.0.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 73BCCC2A08AD2030
Current user is an administrator.
The current local date and time is 2010-03-22 16:35:04.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8800 GT
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 6653711f3405a2768fd511ad262a5dd5
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {A3F933B7-E93E-480F-8EA9-31F39DE7610D}
Description: Sierra Wireless HSPA Network Adapter #2
IP Address: 89.204.183.xxx
Subnet Mask: 255.255.255.255
Default Gateway: 4.2.2.1
DHCP Enabled: Yes
DHCP Server: 89.204.183.xxx
Lease Obtained: Mon Mar 22 14:13:22 2010
Lease Expires: Thu Mar 25 14:13:22 2010
DNS Servers: 4.2.2.1
4.2.2.1
4.2.2.2
Adapter Name: {531265A5-6018-4620-8369-9F08A1B9A1E9}
Description: Intel(R) 82566DC-2 Gigabit Network Connection
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple website was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-03-22 16:28:19.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod touch running firmware version 3.1.2
Serial Number: xxxxxxxxxxxx
** iPhone/iPod touch Sync Tests **
No iPhone or iPod found.

ITunes won't load on Windows 7 after the last update

iTunes won't load on my Windows 7 machine after the last update. There is no error, but the window opens and says "Checking iTunes library" for a while, and then pops up iTunes. When it comes up, I can see it but it won't load or let me interact with it. The window I can see is my podcast library and it suggests it's accessing the iTunes Store. Right clicking, alt-tabbing seem to have no effect, and I can only shut it down in Task Manager. I've tried uninstalling and reinstalling with no luck (...twice). Any other ideas?

Hello Aristoph,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes for Windows issues. If you follow the directions in order it may help:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Won't load iTunes Songs

My iPod will load anything that I put into my iTunes from a CD, but nothing that I bought from iTunes. It loaded new podcasts, all of the music that had been added from CDs- even has playlists with only the CD music, but nothing from iTunes. When I checked on iTunes, everything is there and playable, it just won't load onto the iPod. I've never had this problem in the past. Does anyone have any idea what might be going on??

To what format are you trying to convert? What settings are you using? Has this just started or is this the first time trying this? I really don't know what the limitations are for iTunes 4.7. I thought I was being a luddite in sticking with 7.5....
Try an alternative ripper such as XLD or Max.
X Lossless Decoder: Lossless audio decoder for Mac OS X - http://tmkk.pv.land.to/xld/index_e.html
http://sbooth.org/Max/

Iphone 6 app store won't load even thought iTunes works?

The App Store page won't load at all but iTunes works just fine and so does the Game center.

Hi, mas71.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through for this issue.
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

Podcasts won't synch

My daughter just got a 4th Gen 8Gb iPod Nano. Prior to getting her new nano, she had a 1st gen nano synched to iTunes v8. We have set up the new nano, however, iTunes doesn't seem to recognize that the new nano has the ability to play podcasts. She has downloaded a few and it says that they "are not copied to the device because they cannot be played on this iPod." On the left side under the device, it does not show podcasts either. I have reset the iPod, reinstalled iTunes and nothing seems to work. Any additional help would be appreciated.
Thanks,
Aherlow

I just noticed this yesterday as well. I have been using a 2nd Gen Nano, had no problems with Podcasts,etc. Now this past Saturday got an 8GB 4th Gen. Nano and loaded music, podcasts, pics, etc., still with almost 3 GB free.
New Podcasts won't copy to the Nano when I drag them there. Interestingly, Podcasts that are more than 4 days old (the ones I've already heard) will drag and drop onto the Nano just fine. I wondered if the Podcasts were really there, but clicked on it and it plays fine in iTunes. What is going on? I am updated to iTunes 8.0.1.11
I double-checked, and yes I am logged in to iTunes under my userID/e-mail. Argh.

App store won't load on iPhone 6

I just bought an iPhone 6. Everything works fine except for the App store. When I click on the icon, the only thing that comes up is a blank white screen, except at the bottom the Featured, Top Charts, Explore, Search, and Updates are shown. When I click on any of these, nothing happens. I have tried closing out the app and rebooting the phone. Doesn't change a thing. And it doesn't matter if I am connected to WiFi or LTE, still won't load.
Can anyone offer advice?
Thank you.

Hi, mas71.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through for this issue.
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

Specs:
iMac 10.8.5
3,4 GHz Intel Core i7
32 GB 1600 MHz DDR3
Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
I tried restart my iMac and when I was logged back in, my dock preferences were reset.
Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
When I tried opening it, it said the file was damaged and could not be openend.
I tried opening it with AE or importing the file in a new project but nothing helped.
When I tried looking for autosaves, this is the really weird part, there were none.
Even though there are autosaves from my other projects, this one was completely gone.
It looked like the day before never happened on my computer.
Also when I openend Premiere all the recent projects had been wiped.
So at first I thought it was a Premiere Pro failure.
But than, later on the day, I tried loading some RAW files from my compact flash card.
This is where I would get an error (error -36) which said some data cannot be read or written.
I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
But when I tried moving the files to an other folder the same error occurred.
While dealing with this issue I wanted to put on some soothing music on youtube.
This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
Just like my system preferences, all the preferences I had with Chrome where also reset.
Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
Some background info which could be helpful for solving this mystery:
two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
I got it replaced by a qualified apple repair store.
When I got my computer back, all the files where gone.
I got on the internet without AdBlock installed yet.
A game or whatever it was, can't clearly remember, got installed by accident.
I deleted it immediately.
Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username.
So I brought my mac back to the store.
Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
I asked him; could it be a virus? He replied no way.
I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
Could this be the work of a virus or a malware? Or is it a disk permissions issue?

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Tried to install OSX Mavericks now MBP won't load

Hi all
Last night I tried to install OSX Mavericks on my MBP mid-2010 running Mountain Lion. It downloaded fine and then seemed to install fine. When the message came up saying it was going to restart automatically the spinning wheel hanged, which was the first problem. I switched off the MBP and turned it on again. It now refuses to boot up and stays on the Apple bootup screen with the spinning wheel.
I've tried to restart in recovery mode but this doesn't seem to work. It just goes back to the spinning wheel and there is no progress bar that pops up to indicate the recovery data is being downloaded from the net (I don't have a recovery partition).
I have a backup external hard drive that I can use to restore my MBP and then try upgrading again, but I can't use that until I get into recovery mode.
Is anyone able to help?
Thanks

Ok so I worked out how to get into recovery mode. Turns out I was doing it wrong! I used an external USB drive to access recovery mode.
I ran disk utility which identified and fixed some errors on the HD. I thought this might solve the problem but when I restarted the same problem occurred. I then restored my time machine backup which thankfully worked.
I tried installing mavericks again! Upon restarting and completing the install, I got the message 'OSX has been installed. Your computer will now restart'. After the countdown had finished I got the beach ball which span eternally again, just like last time. After about 10 mins I did a hard reset and again OSX won't load.
Lame...

My iPhone 5c won't send iMessages, snapchats, email from the Mail app, and it won't load YouTube. Other internet apps like Pandora and Instagram work fine though. Any suggestions on how I can fix this?

A couple days ago I first noticed the problem when snapchats would appear on my lock screen but when I opened the app I kept getting the error message that the app was not able to refresh my story. Then the next day I was no longer able to send iMessages, they wouldn't go through and would only reach the second party when I sent them as text messages. Also, YouTube won't load and Mail won't send or receive email. I've already tried restarting my phone but there was no change. At first I thought my network connection was the problem but Instagram, Safari, Vine and Pandora all work perfectly. Any suggestions?

Try this procedure to be sure of a proper restart.
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
I would also try: Settings > General > Reset > Reset Network Settings

Can't log in - desktop won't load

Hi, and thanks for reading this. I hope someone here can help me.
I have a G4 flat-panel iMac, running 10.2.8. Bought brand new in 2002 and have had no problems, with the exception of the hard drive going out a few months later and replaced under warranty. (Apparently a few of the dual-boot machines had this problem.) They also upgraded the OS to 10.2.8 and the computer has run beautifully ever since. Until the other night.
I was online and the modem disconnected but Internet Connect kept displaying "Disconnecting". This happens on occasion and the only way out of it is to shut down the computer and restart. So I did, and when the computer restarted I could not log in. The computer started as usual and seemed fine, the log-in screen appeared, I entered my password, the computer said "logging in", a blue screen appeared briefly... and then kicked back to the login screen. The desktop never appeared.
After several tries of that, I decided to reset my password (with the system CD). It let me reset my password and the computer recognized the fact I had changed my password. (You know how the log-in screen "shakes" to signal a wrong password - that never happened.) I tried to log in again and it said "logging in"... and returned to the log-in screen. The same thing happened when I tried the root user account.
I was able to start up from my Norton CD and changed the startup disk to 9.2. In 9.2, I can see the contents of my hard drive including my User folder in OS X and everything that had been on my desktop in OS X is right there in the "desktop" folder for my user name. I can move, copy, and delete things there. It's all there; the desktop just won't load when I start in OS X.
I don't know if it helps, but in 9.2, the computer recognizes my ZIP drive, CDs, and my Wacom tablet and mouse.
I have gone through the discussion boards and articles here and cannot find where anyone else has had the exact same problem. I have tried the possible solutions below, and none of them have changed anything:
* Norton Utilities (Disk Doctor) - fixed some minor errors, then ran it again and no problems were found.
* Safe Boot - I couldn't get the mouse to work, and when I figured out the keyboard "shortcuts" to log in, I got the same thing as before... "logging in" and then getting kicked back to the log-in screen.
* Disk Utility (from the Mac OS X install CD) - it fixed a couple things then said that my hard drive appeared to be okay.
* fsck (single-user mode) - it said that "Macintosh HD appears to be OK". So at least the hardware seems okay.
* Rebuilding desktop - a long shot but I figured it was worth a try; nothing changed.
* Reset privileges (single-user mode) - as far as I can see, nothing changed even after doing this.
* Startup items (folder) - nothing seems out of place.
* Disable log-in items - I still couldn't log in
* In single-user mode: when trying one of the suggestions from an article here, I typed "cd/Users/{my user name}/Library, then mv Preferences Preferences_old, and received a message stating "no such file or directory."
Looking through the contents of my hard drive, I can see that there is a Desktop icon for OS 9, but not anything for OS X. In theory, shouldn't there also be a desktop icon for OS X? Has my computer somehow lost its "connection" or "map" to my OS X desktop? I ran fsck again today so that I could look at logs/parse failed/plist/etc (an article I found here on apple.com) and following those steps, I noticed there was a line that said "root device is mounted read-only." So I can only assume that has to do with the fact my OS X desktop doesn't load.
So, with all that being said (it's a lot, I know, and I hope it all makes sense) ... Is this problem something simple that I can fix myself, or do I need to take it into the shop and have a technician look at it? As you can imagine, this is all getting very frustrating, with limited access to an old version of Photoshop, SimpleText, and a very old web browser that only works on a few sites (and thankfully Apple.com is one of them). I miss my OS X.
Thanks again for reading this, and for any advice/assistance you may be able to provide.

Thanks, Anna. Excellent work. Everything seems fine, except, of course, the booting OS X part.
First try Resetting the PRAM
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately and allow computer to boot.
The fact that you can boot in Safe Mode suggests that you may have a Login item that conflicts with the startup process. If resetting PRAM does not work try this:
Boot computer in Safe Mode.
If you are able to get into the Login items (Apple Menu > System Preferences > Accounts > Login Items) make a note of all the log in items (write it down). Then delete them all by selecting each one in turn and clicking the minus sign under the list. Shut down and try booting the computer normally. If you are able to boot successfully add the Login items on your list one by one and try rebooting each time you have added one. This should help you isolate the offending item.
I hope one of these methods works. Post back and let me know.
cornelius

I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my do

I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my documents

I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.

u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Podcast won't load

Similar Messages

Maybe you are looking for