Podcasts failing to download but indicating a run time of 149.07.51

Most podcasts I've tried to download over the last two days are failing to download. In particular all the BBC podcasts are failing in this way
When I click on "get episode" it immediately comes up with a run time of 149.07.51. (Every time). I've since upgraded to V9 but this did not cure the problem.
Any help appreciated?

For posterity, and just in case anybody stubmbles accross this post whilst researching a similar problem.
The BBC, Apple and all the usual technical avenues could not help on this. In the end I had to complelety rebuild the PC. That sorted it. All working fine now.

Similar Messages

  • Teststand error states that a vi failed to load in the Labview Run-Time Engine

    I am getting an error in teststand that states that a vi failed to load in the Labview Run-Time Engine version '14.0.1'
    If I look at the software loaded on my system with the NI Measurement and Automation Explorer I have Labview Run Time engines for version 2009, 2010, 2011, 2012, 2013, & 2014 on my system.
    How do I get this VI to run on this system when it is called by test Stand?
    Thank you

    The RTE 14.0 was loaded as part of my deployment and after I ran this I got an update notice for the F1 patch which I also loaded.
    I do not have labview loaded on this system, only the run time engines from running my deployment.
    When I launch t he teststand sequence, when it calls the labview VI, I get the following error moessage:
    Error: Failed to load VI 'C:\builds\RelayVoltageMeaure.vi' in the LabVIEW Run-Time Engine version '14.0.1'. LabVIEW: The VI is not executable. This error may occur because the VI is either broken or contains a subVI that LabVIEW cannot locate. Select File>>Open to open the VI and verify that you can run it. VI Path: C:\builds\RelayVoltageMeaure.vi[Error Code: -17600, Failed to load a required step's associated module. ]
    I have attached the teststand sequence if this helps.
    Thanks
    Attachments:
    QuantumDigitalBd.seq ‏13 KB

  • Latest version downloaded but can't run it

    I've downloaded the latest version several times-each time it alerts me that the new version is available. It goes to my download mgr as usual and after it finishes, it disappears without a chance to run the new version.
    If I'm already fully upgraded then why does it keep asking me if I want to upgrade? OR if I'm not, what is the issue I'm dealing with?

    Yeowsers! That is a bit drastic.
    Sorry I can't give you a link, but try to download the file yourself.
    That is: look for the version you want on this site and download it yourself.
    Then run it and see what happens.
    Oh, be careful. I don't want you to go through what I just went through with my updates from 16 to 17.
    Good luck all the same.

  • "Slideshow HD failed to download" but Mac AppStore already charge the payment to my creditCard

    I just buy a full version of HDslideshow maker from Mac Appstore but when I fill in all the detail including payment credit card detail is done sucessfully. But when i download the App they come out the message "Slideshow HD failed to download"

    You will need to do a network recovery:
    Install Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • HT1632 My ipod seems to be stuck in a "Loop" as my nike+ tries to download, just keeps saying, "downloading" but nothing happens, runs my battery down. What can I do?

    My ipod seems to be "stuck" downloading of workout information to Nike+. Ipod keeps saying it is downloading but doesn't complete download, runs my battery down and my computer doesn't now recognize my ipod and I get "error" message (2005).  What can I do to fix this problem?

    I suggest try getting it back to your stock iOS and forget about jailbreaking.
    http://support.apple.com/kb/TS1538
    Try a manual install (using DFU Mode), as outlined in the link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • How to drag and drop a object in an indicator at run time?

    How to drag and drop a picture at run time in a indicator displaying pictures on the front panel. The main thing is that the window is displaying frames continuously?

    Hi Vivman,
    You have duplicated this post here. Please do not post the same question to separate forum post.
    Cheers.
    | Michael K | Project Manager | LabVIEW R&D | National Instruments |

  • Open Registry Key VI. Error -604. But just under Run Time Engine (RTE) when no admin rights

    Hi,
    When I run my code under RTE I'm getting -604 error saying remote access to registry denied.
    To make it work I have to grant admin rights to the user, and then I can run my code under RTE.
    The problem doesn't exist under Development Environment. The user can have no admin rights to be able access the registry.
    OS: Win7 x32
    Any suggestions?

    Well in the RTE it's an executable so I expect UAC has a look at what the exe tries to do. Also...are you running the development environment on an account with administrator privileges / UAC turned off? (I do development on a PC with local admin rights....and/or when LV installs it requests to always run with elevated privleges).
    I think there is a way to get an application to declare it needs elevated privileges at install/run-time somehow but I never really figured out how to do this.
    (Because to install the software you need admin rights so while installing it can do other things...which is why you can set registry keys in your installer)
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • Podcast failed to download, can't delete podcast entry

    I tried to download podcasts, but they failed, but the titles are still in download area. How to delete these files?

    How can audio files show up in a smart playlist but not be listed under music or podcast?
    No idea. They must be somewhere in the library, otherwise they would not appear in (Smart) playlists.
    Is there any way to delete them from the library?
    Select the file(s) in the playlist, hold the Option key, then press Delete.
    This will normally remove the file from both the playlist and the library.
    Hope this helps.
    M

  • Podcasts failing to download 8.1

    Have been happily downloading MSNBC video podcasts for the past week, great speed (approx 3 mins per ep download time), then out of the blue today download speeds plummeted and each attempt at downloading fails with a 3259 error.
    Have checked I'm on the latest version of iTunes (yup), disabled firewall (no diff), rebooted both pc and router multiple times, ran network diags (all passed), so am now officially stumped.
    I have run speed tests and downloaded other files with no problems - so it's not my ISP. I also have not recently installed any new software, so I doubt it's that either.
    Is anyone else having a problem like this? Any solutions available apart from what I've already tried?

    Problem seems to have resolved itself, podcasts flew down this morning...third day of trying.

  • Creative Cloud installer downloads but will not run

    I have downloaded and re-downloaded the Creative Cloud installer but when i click on the download to run it my computer (Sony Vaio windows 8) acts like its trying to but nothing ever happens.
    Specs:
    Sony Vaio
    Intel core i7
    windows 8.0 (have not updated)
    8 gigabytes of ram
    Thanks

    Deathknive you are welcome to review the installation logs for the Creative Cloud Desktop application for specific errors.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors which you discover.

  • Itunes 11.0.2 - downloaded - but won't run for install Windows 8

    Hi
    My iTunes wouldn't open after the last automatic update on 2/23 - so I uninstalled and have downloaded a fresh copy of the 11.0.2 SW.
    I can't get it to run though.
    I am the admin on the laptop
    I have attempted to RUN directly from the download site as well as saving a copy of the setup to run directly from my machine and looks like it starts but nothing happens.
    Suggestions?
    Thanks

    I tried everthing mentioned on the forum here across various posts
    uninstalling Office
    clearing browser history
    running install as administrator....
    I could go on but nothing worked so I rolled back to iTunes10.7 and that worked a dream. So clearly Apple is the problem not windows!

  • Asha 210 downloads but doesn't run apps

    Hello,
    I have just bought a nokia asha 210 phone. I connect to the Nokia Store, find and download an application for this phone. But at the end, it just shows me a filename (with .jar extension) and says "unknown state" and I can't locate the appliacation and can't run it. What could be the problem? 
    Please help.
    Thanks in advance

    Hi, sayat. To verify, does it only happen to a particular application? If yes, please provide the name of the app. In case that all apps are getting the same error message while installing them on your phone, this link might be useful: http://www.microsoft.com/en-us/mobile/support/faq/​?action=singleTopic&topic=FA116029. The link provided is intented for the US, but try accessing it on your local page.
    Grant us to know the progress it made on your phone. 

  • Mavericks Installer Downloads, but will not run.

    I am currently running Mountain Lion, I am trying to install Mavericks, but I am having strange issues.
    The Installer downloads from the App Store, runs for a few minutes then returns the error: "This copy of the Install OS X Mavericks application can't be verified. It may have been corrupted or tampered with during downloading."
    I checked my date and time prefences, and did everything in http://support.apple.com/kb/TS5307, still no luck.
    Now I finally threw in the towel and decided to do a CLEAN INSTALL, I created a USB Recovery disk from another Mavericks Mac and booted from it on this Mac.  I deleted the hard drive, and proceeded to do the clean install, after the system completly downloads is simply takes me back to the main menu from the boot disk (where I can choose disk utility, time machiene, install Mac OS X....). 
    The system will download the installer, but I cannot get the actual installer to run, even when booting from a Recovery Disk.
    HELP!!!!!!!!!!

    Deathknive you are welcome to review the installation logs for the Creative Cloud Desktop application for specific errors.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors which you discover.

  • OPMN failed to start  (but it seems running) during setup

    I got a warning during setup of Grid Control on new database )10g rel 2 (Linux).
    I tried to set on contnue and after setup OPMN starts (as during setup) but ./emctl
    start oms fails with unexpected error.
    Any suggestion?
    Thanks
    Fabio

    Hi...
    I have the same problem.
    listener for db10g is started
    I set LD_LIBRARY_PATH to lib dirs with libmodapi.so and others and made
    "opmnctl startall" succefull
    I can connect to EM on 7777, 4489 ports
    no any messages in <oms10g_home>/ompn/log don't tell me anything about problems, <oms10g_home>/sysman/log is empty
    emctl start oms failed with unespected error :((((
    what exactly I have to see on emoms.properties?
    OEM 10.2.0.1 on SLES 10

  • Dell printer driver download not running. Seems like it downloaded. but won't run

    Download ran for 5 minutes . Said it "stored" it on computer. Click on file to run. Says no file available.
    Also, why can't updates just run like they did on Internet Explorer instead of being held to run later?

    Click here and follow the instructions.
    (46273)

Maybe you are looking for

  • ATI Display Driver

    I am trying to install the the ATI Display Driver package for a T500 without any of the applications that are included with it. In other words, I only want to install the drivers and nothing else like the Catalyst Control Center, etc. When I try to d

  • Setup WLS5.1 to accept only HTTPS requests (and not HTTP requests)...

    Greetings, Does anyone know how to configure Weblogic Server 5.1 so that the web server will only accept HTTPS requests (on port 7002) and not accept HTTP requests (on port 7001)? I tried commenting out the HTTP ListenPort line in weblogic.properties

  • Solution Manager Basic Setting, Get SAP Component fail

    Dear All When I execute Solution Manager initial configuration wizard on step: Initial configuration part II, it comes out an error: Fetch SAP Component fail. Can anyone tell me what's the problem, thanks. Steps for Reconstruction     1) SPRO => Basi

  • Account Postings in case Subscontarcting and Stock Transport Order.

    Hi All, Please help in understanding what account keys(G/L Accounts ) will be hit in the follwoing scenerios: 1. Standard Subscontarcting Process during GR. 2. Stock Transport Order , Delivery Type NL     Movement Type , 641 and 101. 3. Stock Transpo

  • Internate Pricing Configurator

    Hi All, Does somebody have Internate Pricing Configurator (IPC) document? I am in an immediate need. Please send link. Regards, Nikhil