"podcasts" is not visible in iTunes after software update

iTunes no longer shows "podcasts" as a category.  I have several active subscriptions--they seem to have disappeared.  All of the other usual categories (e.g., music, TV shows) are still there.  This occurred immediately after I downloaded today's iTunes upgrade.  I have tried downloading more podcasts.  That happens fine--but they are not visible from iTunes after the download.

I can re-check the "podcasts" box in the Windows version.  It's not grayed out.  But there doesn't seem to be any way to save my changes.  Didn't the "preferences" dialog box used to have a "save changes" button at the bottom? 

Similar Messages

  • Ipod touch4g  is not detected in pc and itunes after software update

    after software update is done. when i connect my ipod touch it is not detected in pc (windows 7) and in itunes please help me anyone.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod stopped showing up in itunes after software update

    i have an ipod nano and an ipod classic and they both stopped showing up in itunes after i updated the software. please help

    Have you tried here:
    iOS: Device not recognized in iTunes for Windows

  • Itunes does not recognize my Ipad after software update. says it is in recovery mode, Itunes does not recognize my Ipad after software update.

    After an ipad software update, it does not recognize my Ipad in Itunes.  Gives error 14. what to do?

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
    If you haven't synced to a computer them (from here) :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • Latest episode of Podcast still not appearing in iTunes, after a 10 day wait

    Hi folks,
    So far four episodes from my feedburner feed have sucessfuly been published to itunes.
    But the fifth episode, published on the 24th of August has not appeared in iTunes.
    The feed is this:-
    http://3dartdirect.com/feed/podcast/
    The Feed validator service (feedvalidator.org) seemed to think it was a valid feed.
    As an idea, should I delete the Wordpress post and re-create it, perhaps forcing iTunes to notice the refreshed feed?
    Any ideas?
    Thanks in advance,
    Paul Bussey

    I think the problem lies in me using a Wordpress plugin called "Bulletproof Security". A similar problem was experienced by this user who also uses the blurbrry plugin:-
    http://forum.blubrry.com/index.php?topic=3688.0
    The support at my hosting company also received the 403 error and recognises that iTunes may have an issue with this security plugin.
    This thead may be of help to other Wordpress users who have this plugin and are experiencing similar problems.
    I've asked Apple to alter the podcast feed to a feedburner address instead (since I don't have any subscribers just yet). I figure that since the feedburner feed lies outside of my selfhosted Wordpress site, there shouldn't be any security issues.
    Hopefully Apple will respond a second time!
    Thanks again Roger.

  • Note 4 GPS issues after software update

    After updating to the new software the GPS is no longer working. The software update was realeased on 7/23/15Baseband Version: N910AUCU2COC5Kernel Version: 3.10.40-4160876dpi@SWDD3910#1Build Number: LRX22C.N910AUCU2COC5The GPS signal locks and does not move with the map. It freezes in location then catches up a few seconds to a minute after. It also bounces around in the map. I have tried to restart my phone and even did a factory reset, this did not fix the problem. 

        I know GPS functionality is important glassmann71, especially when traveling. Have you tested more than one navigation or mapping app? Any difficulties with signal when using other, non GPS related apps or functions? Does this happen in all areas that you travel?
    JonathanK_VZW
    VZWSupport
    Follow Us on Twitter@VZWSupport

  • Safari not connecting to internet after software update

    I have just completed a software update and now safari will not connect to our wireless internet... airport says it has full bandwidth and other macs connected to the wireless connection are working without any fault.... has anyone got any ideas????
    Thanks!!

    Hello Sarah:
    As you probably have already guessed, quite a number of things might have happened.
    My network is Ethernet, so I am not much help with wireless networks. However, I think I would (if I were you), run an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    An archive and install will place a fresh copy of OS X on your system while, at the same time, preserve your files, programs, and settings. It is always a good idea, however, to have a good backup strategy before any software changes. You should then run software update to bring your system to a current level (in your case, OS X 10.4.11 is current, I think).
    The A&I should eliminate any system software issues.
    Barry

  • Ipad2 will not connect to itunes after newest update

    Updated Ipad2 and now itunes says it cannot connect to the Iphone??

    Update!!!
    Hope this helps - after spending hours on the phone with the Apple support line, I was connected with an AT&T engineer.
    As it turns out, I have an original Iphone....original phones were supplied with a BLANK sim card and needed to bae activated by Itunes only.  Once aan original Iphone SIM card is burned with your phone number it can your phone can NOT be updated with new soft ware via itunes or this problem will occur.
    Solution - go to AT&T, they will supply with a BLANK sim card (it can NOT be tied to your phone when they issue it) and then you go home and log into itunes.
    I was advised by the engineer that I should never update the software on my original iphone or this would occur.
    I will post one more reply after installing a blank SIM and activating via itunes - Hope this helps others others(i am surprised that no one else has went through this and posted)

  • HT4623 My iPad is not connecting to internet after software update what can i do

    Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
    what to do to correct this issue? Please 

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.
    If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

  • Artists not showing in iPod after software update.

    Need help...After updating the software in a 5G Video iPod, songs successfully transferred, but the artists for those songs do not show up? Example, I transferred U2's Vertigo over where Vertigo listed and played in Songs, but U2 did not show up under Artist in the iPod? Has anyone else experienced this problem and found a solution?
    Dell Dimension 8300   Windows XP  
    Dell Dimension 8300   Windows XP  

    Try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • Connect to iTunes after software update

    After doing an update to 7.03, it keeps saying "Connect to iTunes", i then restore it and it then fails. Any ideas? Thanks

    ReBoot your phone & computer..
    Check your internet connection..Logout then Reloggin to iTunes...

  • Recent emails not showing in outlook after software update

    i updated my software yesterday to maverick and it has runied my search in outlook. office 2011. when im trying to search a recent email, its showing emails only until dec jan 7th 2014. the emaisl are there but im not able to use the search functions, im having to manually run through thousands of emaisl of find something i recieved 2 months ago or 3 months ago.
    please advise how do i solve this. im sure, its somethign small but its annoying .
    help!

    Try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • BlackBerry Z10 - voice mails not showing on Hub after software update

    I have a BlackBerry Z10 smartphone with Verizon and yesterday I upgraded to the 1.0.4.1 version. Now my voice mails are gone from the Hub and I don't even get notifications whenever somebody leaves me a voice mail. I called Verizon and they were not able to help. Is anybody having this same issue? Can somebody help? Thanks in advance.
    Solved!
    Go to Solution.

    I had the same problem as you - including the missing voicemail option to add to the hub.  No amount of battery pulls or re-starts helped.  Here is what worked for me:  Go to Setup and activate Visual Voicemail.  Agree to the $2.99 monthly fee. Wait 5 minutes as directed and then call yourself and leave a voicemail or two.  You will notice the Visual Voicemail icon (and message indicator) now appears in the Hub.  Go back to Setup and deactivate Visual Voicemail.  Your regular voicemail, and test messages, should now remain.  Not sure if you/I will get charged the $2.99 for 10 minutes worth of Visual Voicemail but it will be worth it to get the regular voicemail back.  Hope this helps.  Post back with your results.

  • I updated itunes for my 64 bit system to 11.1.4. I was not able to detect my cd drive.  I removed itunes, apple software update, apple mobile device support, bonjour and apple applications support. After a few attempts it now recognizes my cd drive but no

    I updated itunes for my 64 bit system to 11.1.4. I was not able to detect my cd drive.  I removed itunes, apple software update, apple mobile device support, bonjour and apple applications support. After a few attempts it now recognizes my cd drive but not by ipod.  Any suggestions? Thanks.

    I updated itunes for my 64 bit system to 11.1.4. I was not able to detect my cd drive.  I removed itunes, apple software update, apple mobile device support, bonjour and apple applications support. After a few attempts it now recognizes my cd drive but not by ipod.  Any suggestions? Thanks.

  • My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • How do I use the counter and digital signals of the 6071E while it is connected to SCXI modules?

    I am contemplating using a PCI 6071E with SCXI. We have the boards (6071E), we would need the cable (I suppose SH1006868) and the SCXI system. I would like to know how would you access the counter and digital line capabilities of the board. I will be

  • Diff ws and gui upload

    difference between ws_upload and gui_upload

  • To save oracle report in a given location

    Hi, I want report to be save in d:\dbr location in pdf format . I am running report through form. below is the code. declare pl_name VARCHAR2(30) := 'tempdata'; pl_id ParamList; varno number; VENAME VARCHAR2(30); VMONTH NUMBER(2); VYEAR NUMBER(4); va

  • ABAP Report Wizard

    hi all, how to create ABAP Report Wizard? how to prepare it?? if u can it then send me more details now.. <REMOVED BY MODERATOR> thx, s.suresh Edited by: Alvaro Tejada Galindo on Jan 23, 2008 11:49 AM

  • Safari does not start after upgrade to 4.0

    Used Autoupgrade to upgrade to Safari 4.0 and now Safari will not launch. Mac is only two months old with very little other software installed. Any ideas how to start troubleshooting? Any FAQs on Safari 4.0 issues? Side comment: This is pretty weak o