Podcasts play back is dragging

When i first started downloading NPR podcasts the playback on my IPOD was fine. However, for the last two weeks the playback is dragging. This does not happen when i play back music. Only when i play back podcasts. has anyone else had this probelm? does it have anything to do with the new version of ITUNES i downloaded?

Go to Settings > Playback > Audiobooks and the setting probably says "Slower". Tap it to change it to normal.

Similar Messages

Podcast play back controls not responding on ipad

Podcast play back controls not responding on my iPad. The problem started today. I powered off the iPad and problem not solved. What to do?

I was unable to fix it on my own. My son suggested that I take it to the Genius Bar at an Apple Store. Fortunately I was going to be in the city, and was able to make an appt. with the store closest to me. A very helpful young 'genius' took my iPad in the back room and fixed it. I don't know what he did, but he said something about 'firmware'. I don't even know what firmware is, but he said it was unlikely that the problem would recur. There was a sense that it had to do with the new IOS6. If you are able to visit an Apple Store that is what I recommend. Make an appointment first online at Apple.com. The service is free and I was VERY grateful to have my iPad restored!

Podcasts playing back at improper speed after recent iTunes upgrade

iPod Touch G2
After upgrading iTunes this week (SHARED > Home Sharing is now in the left pane), podcasts now play back improperly. Different podcasts now play back at higher speeds.
Music (songs) plays back at normal speed.
What to do? Do I have do a Restore?
Thanks.

it's easily done. that's why i always make sure to hit the power button and put it into sleep mode before putting mine in my pocket! (if you double click the home button while it's in sleep mode you can bring up music controls for quick track skips/pauses without having to slide to unlock)

Podcasts playing back at 2x normal speed

Since updating my 4G nano with the latest Updater version 5.1, podcasts play at twice their normal speed (sounding like the old time Chipmunks). To fix the problem (each time after powering the nano up), I need to jump to any other podcast during playback. When I do suddenly the playback goes to normal speed. Then I can go back to the podcast of interest and it will also play at normal speed.
Anyone else had this experience with Updater 5.1?
MDD G4 dual 1.25GHz, 1.75GB ram Mac OS X (10.4.7) DVDRW & DVDROM drives

Try resetting the iPod...
Reset iPod
Also, try going to Settings-->Reset All Settings (on your iPod).
Finally, make sure the software on your computer and iPod is up to date...
iTunes
iPod Updater
Update iPod's Software
btabz

White screen on podcast play back

When I "Export to File" on the Podcast, ansd then try and play the video back, the audio works just fine but the video comes through as white. Don't know why this is happening and have tried many different things!

you should probobly let the ipod fully charge then keep it on till it dies then re charge it

Podcast plays back via server with iTunes but wont subscribe?!

I have 4 Podcasts on the iTunes directory, the problem is that you can click on one and play it but when you try to subscribe by pressing the subscribe button there is always an error. Has anyone else had a problem like this? I've tried validating the feeds but that never worked so here they are in their original form. if someone could fix one I could copy and paste for the other if its an XML thing.
You can find my Podcasts on the iTunes Directory by clicking this link (there are 4 of them, I've included all the feed urls for completeness below)
http://phobos.apple.com/WebObjects/MZSearch.woa/wa/com.apple.jingle.search.Direc tAction/search?submit=edit&term=leftcut&attribute=collection&media=Podcast
the URLs for the actual feeds are as follows,
http://ijsr32.infj.ulst.ac.uk/~14909502/leftcut/Podcasts/Leftcut_anim8.xml
http://ijsr32.infj.ulst.ac.uk/~14909502/leftcut/Podcasts/Leftcut_flix.xml
http://ijsr32.infj.ulst.ac.uk/~14909502/leftcut/Podcasts/Leftcut_musikplus.xml
http://ijsr32.infj.ulst.ac.uk/~14909502/leftcut/Podcasts/Leftcut_spread.xml
Can someone PLEASE help, you really need to get the bottom of this with answers, I can't figure out what is going wrong. Its very urgent that I find out what's wrong and fix it as its part of my final year degree!
thanks
eamonn

I believe your issue is related to your XML files. They do not validate as RSS feed...many errors.
Use this tool to see what the issues are and correct them:
Feed Validator for Atom and RSS

Dragging and playing back multiple MC motion

Ive been on this case for a while now, and really havent gone
anywhere with it.
Just curious to see if anyone has any samples or examples of
multiple MC's being dragged around, their motion recorded and then
played back.
I dont seem to be having trouble with moving one mc around
and playing it back. i store the coords of the mc (onenterframe)
into an array, and on playback just traverse back the array.
Im having difficulty when there are more than one mc's,
trying to figure out which mc's moved in which order, and what not.
I dont want to store all the mc's coords in one array, but
have their own array. The reason for this is, that the second part
of my problem is figuring out a way of assigning multiple mc's to
move simultaneously.
i guess the easiest way to think of this would be like
drawing a foot ball play on the computer and replaying it back.
Anyone have suggestions?
Thanks

This is really kind of a complex project and it seems that
there is a lot to the design of it. There are probably at least a
dozen good ways to do this. But the main guidance I would give you
is, "If you need to keep track of something – then do so!" In
otherwords, if each clip having one array isn't letting you keep
track of which order things were moved in, then start a new array
that just keeps track of that.
So there are two modes – playback and record. The needs
of playback will dictate what is recorded in record mode. So let's
think about playback mode first.
Playback also has two modes – simultaneous and
sequential. Sometimes the clips will need to play in the order they
were originally moved and sometimes two or more will need to do
their thing at the same time. Is this right so far?
If that is the case then I would probably us a lot of arrays.
We need to track any give move of an item as well as the over all
order of their movements.
So each time a clip is moved I would create an array, they
could be numbered sequentially or with a time stamp of some sort so
that if clip5 was moved and then a bit later it was moved again it
would have two arrays recording the two different paths. I would
probably call these pathArrays and store them within the clip
themselves. So clip5.pathArray1, clip5.pathArray2, and so on.
At the same time, I would have another array that records the
order or movement. So the first time clip5 moved it would also
record that clip5 moved first. Does that make sense? I would
probably call this the moveOrder array and there would be one for
the whole setup. It would probably contain info like this:
moveOrder[0]={name:clip5,seq:0,startTime:1387}
That would read that the first thing moved was clip five, it
is the first time (remember arrays are zero based) that particular
clip has been moved, and it was first dragged 1387 milliseconds
after the player started. You might also add other bits of info
that you need to record. The next time clip 5 is moved its seq
number will be 1, then 2, and so on.
Playback would then step through the moveOrder array,
reference it to figure which pathArray to replay, when the playback
got to the end of the pathArray it would check the next element in
the moveOrder array to see what to play.
If you know that just want to see all the paths of a given
clip you would just iterate through all of the pathArrays or if you
wanted all the odd number clips to move at the same time you would
just iterate through all their pathArrays.
Anyways, what do you think? Would that meet your
needs?

How can I fix: iPad1 plays back audio podcasts (not music) at double speed?

How can I fix: iPad1 plays back audio podcasts (not music) at double speed?

Hello @GiveHP2ndChance,
I understand that you are not able to get adequate sound from your notebook computer's BEATS Audio, and I would be happy to assist you in this matter!
To correct the sound on your system, I recommend following this document on No Sound from Speakers (Windows 7) or for (Windows 8). This should help improve the quality of the audio on your notebook.
To assist you further, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If the same lack of quality is present when headphones are plugged in.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My nano plays back itune podcasts at too fast a rate.

Hi All! My nano plays back itune podcasts at too fast a rate. My iMac does not do this with the same podcasts. If I have my nano connected to my iMac and use it (the nano) to playback thru my computer monitors- it's fine. Unplug it and use earbuds and it's too rapid!? Did my nano drink too much coffee? Thanks, Michael

O.K. Finally figured it out... Podcasts have a 1/2x, 1x and 2x speed setting on one of the windows that will change the playback speed. Never Mind!

Why can't I play back podcasts like I play back songs?

Not sure if this is the right forum (posting questions seems to have changed for the worse) but no one seems to be able to answer this question! Can I play back individual podcast downloads one after the other without having to go back to the main menu everytime? I play back my podcasts in the car and it gets dangerous everytime I want to move to the next podcast. Why isn't there a setting in Preferences to fix this? It seems so basic! Is there a workaround or do we have to wait for iTunes 7?

Instead of the podcast menu, go through Music -> Genres -> Podcast -> All -> pick your podcast show (album). Most podcasts are tagged such that they will play in order, oldest to newest, when started from this route. <hr width="90%" align="left">

ITunes 11.1 and / or the Podcast app on iOS 7 will not allow me to create play lists in iTunes. Is there an app that will allow me to create podcast plays lists and play them on the iPhone running iOS7 ?

iOS 7 will not alow podcasts lists in the music app so we have to use the podcast app
but iTunes 11.1 and / or the Podcast app on iOS 7 will not show podcast play lists created in iTunes (well maybe it does but clicking on the podcasts app causes iTunes to freeze so can not select)
sometime some folders created in iTunes have appeared with the Podcast app but others not.
creating an on the go list in my iphone is agony - I have over 100 podcasts I have subscribed to and when creating a list you can not view by most recently downloadded podcast
AND you can't search (no search bar) so I have to scroll through to find a podcast that might have been updated - but they are not in any logocal order that I can work out (not alphbetical or date added).
Video podcasts are mixed with audio
podcasts I delete (unsubscribe to) keep coming back
its a disaster
my question is there an alternative iPhone app that works with iTunes
no I don't want an app where I have to download to the phone directly, thats 100 subscriptions I will have to make agaian

Agree about the disaster part. I haven't found a fix within iTunes.
I gave up and switched to downcast 2 days ago. Even though it was a hassle to re-subscribe to all my podcasts, im so much happier.
To make switching easier, I found that in iTunes you can "get info" on the podcast and copy the RSS address to the clipboard. Put all of these in a message note. When iCloud syncs the note to your phone, you can copy and paste the urls into downcast one at a time to subscribe.
Downcast has crashed on me occassionally when I'm subscribing to feeds, but so far it has recovered gracefully each time and no data was lost.

How do I rip a CD, but have it play back without ga

Just dragged myself into the 2st Century and bought myself an mp3 player (the Zen 20gb - black).
I'm in the process of transferring my CD collection on to it, but have come across a problem with certain albums. There are some albums that I want to play back without gaps (e.g. Pink Floyd's 'The Wall'; Jeff Wayne's '...War of the Worlds' etc). Ideally I would still like to have the individual track names displayed, but to play without gaps - is this possible or am I expecting/wanting too much?

Have a look at the FAQ post in the MP3 player forum, specifically the link "gapless playback".
In short though all Creative players play with tiny gaps, so you can't achieve what you want to do. You'd have to rip the entire CD as one track.
The only player I'm aware of that has gapless playback is the now defunct Rio Karma.

Midi recordings not playing back??? BIG problem!

Hi Everyone....
I hope its not a bug, so im praying someone here can figure this one out....
lets say i am playing a midi recording and record it on an audio instrument channel..
when i play on my midi keyboard everything works fine and logic simply works as it should.
now, after i have recorded a midi composition, however short or long, and i push play to hear it and edit it, logic wont play it back, and no sound comes out of the particular track?
Then, when i drag the midi recording to another audio instrument track, it plays back fine!
Also, when i try to put the recording on this track on solo, it wont work, and the midi region doesnt have the yellow line around, like it usually has.
I am guessing it has to do with the instrument, which in this case is the korg legacy, but what i dont understand is that if it would be the instrument, why does it work perfectly when i play it on my midi keyboard? and not after i record something and want to play it back????
I hope someone has some more info on me, cuz its really slowing me down atm, and it has happend a couple of times already, also on other instruments...
btw, making a duplicate track also does not work, it wont play back on that either! but only the original recording recorded to that track. and lastly, i also copied all the notes out of the midi recording, then erased it and paste it as a new midi recording, and thats also no good...
Quite a long question i guess, but i hope someone can help
thanks a lot in advance.
cheers,

I'm happy to be corrected on this one but it seems that this problem (which I'm currently trying to deal with) occurs when opening 7.x sessions in v8. At the moment the only way to get the track to play again is to close the session and re-open it. The channel will be muted when you re-open it so you need to hit 'm' on the regions(s).
It isn't synth specific either (I don't think) as I'm using a few different ones and getting the same result.
Pretty average eh. Hope they fix it soon.
Cheers
-Andrew

Audio Instr records but does not play back in Logic Pro 9

Hi all.... recently upgraded from a PPC G5 to an iMac 27"" 2.8 GHz Intel i7 w/4GB mem. was running Logic 7.2,now Pro 9. Here's my prob. After opening an old session in LP9 and recording an audio instrmnt (no prob setting up trk or recording) the trk won't play back. However,I was able to drag the recorded region to another trk (set up w/same audio instrmnt) and it plays.Is there some possibility that when opening a Logic 7.2 session that LP9 sees an audio instrmnr trk as an "audio"trk instead? Since I'm relatively new please excuse any newbie faults. Any help is greatly appreciated.
-Ronnie-

Hi all.... recently upgraded from a PPC G5 to an iMac 27"" 2.8 GHz Intel i7 w/4GB mem. was running Logic 7.2,now Pro 9. Here's my prob. After opening an old session in LP9 and recording an audio instrmnt (no prob setting up trk or recording) the trk won't play back. However,I was able to drag the recorded region to another trk (set up w/same audio instrmnt) and it plays.Is there some possibility that when opening a Logic 7.2 session that LP9 sees an audio instrmnr trk as an "audio"trk instead? Since I'm relatively new please excuse any newbie faults. Any help is greatly appreciated.
-Ronnie-

When I import my files only the audio plays back not the video. If I export the sequence its there?

When I import my files only the audio plays back not the video. If I export the sequence its there?
I am new to Premiere having just downloaded the 30 day trial yesterday, I jumped straight in and imported all of my files from my video camera however in Premiere only the audio plays back with the displays just showing a black space.
Out of curiosity I dragged three or four shots into the sequence editor and then exported them and played this through VLC and the video was there?
As I said I am completely new to Premiere having only spent around 3 or 4 hours with it in the past, I read a few forum threads around similar issues but couldn't find any solutions and as I am trying to edit together a short film for a college project due in soon I need to try and find a way to fix this A.S.A.P
Any help would be appreciated and if theres any more info I can provide please let me know.
Thanks
Drew

Being new, I'm sure you don't know about the NEW ITEM process, so click/read about that at this link
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923
Also, More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Exactly what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Podcasts play back is dragging

Similar Messages

Maybe you are looking for