Podcasts showing up as saved when they are not on my computer

I have a daily podcast I listen to.  I set the settings to delete all played episodes, and this seems to successfully happen.  When I sync my iPod touch to my computer (via USB; I never sync over WIFI), two old episodes show up under the "saved" tab.  These episodes are not even in my iTunes in the first place.  I delete the episodes off the iPod, but they show up again whenever a sync happens.

I went into the where the files themselves are stored in the iTunes\Podcasts directory and saw that the files were there, even though they weren't showing up in iTunes.  So what I did was go into iTunes and added all the old recent podcasts—and while it was downloading most of them, those that were already on the harddrive did not download because it recognized they were there.  Then I could delete ALL of them, and the file directory was truly empty.  iPod is fine now.

Similar Messages

  • WOT and Webutation is showing as disabled when they are not

    WOT and Webutation is showing as disabled when they are not .The icons show,but no color on icons. Says WOT is disabled when its not. Also the same on Webutation. Tried uninstalling then reinstalled both and the same thing happened. Tried Wot on another users account and theirs work. Can someone help me on these issues?

    capaho wrote:
    That's like saying a boat is an airplane because it's not a car.
    SMH
    In other words, how does your explanation account for ED (enhanced definition)?
    ED is generally considered to be 576p or 480p, but this is not universally accepted and these resolutions are often accepted as HD also. Additionally an ED signal uses non square pixels just as SD does so the horizontal pixel dimensions should be no more than 720. Exactly how the tv would treat these resolutions I don't know (yet).
    If you have a copy of the source code for the function that displays the HD icon, please post it so I can take a look at it.
    Why should I have such a copy and why is it relevant. The issue here is that the OP believes his video is incorrectly labelled HD which is not the case. There may or may not be anomalies in the way the tv attributes the HD label to some files (although it isn't the case for me), however the OP has incorrectly converted his source video and they are no longer SD, they are also not ED by whichever definition you wish to apply and any such anomalies should they exist are not responsible for the OP's files being labelled HD.

  • I recently had to get a new computer, my list of audible books is there but can't open because original file cannot be found.  how do I find them or redownload them when they are not in my purchased list anymore?

    I recently had to purchase a new computer, after doing so I no longer can open my audible books.  the list is there, but I get an error message telling me that the original file cannot be found.  How can I redownload them when they are not in my purchased list anymore when I go to the Apple Store??

    Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • My ipod 5th gen won't change volume when headphones are plugged in, but when they are not I can change the volume on the speaker.  How do I fix this?

    My ipod 5th gen won't let me adjust volume when headphones are plugged in, but when they are not I can adjust the volume on the speaker.  How do I fix this?

    Try a hard reset of the Nano. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    I assume you have double checked to make sure you are plugging the headset all the way in meaning the white part of the headset is flush with the body of the Nano?
    B-rock

  • I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file

    I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file

    From the Finder menu select 'Secure Empty Trash'. If this or the suggestion above doesn't resolve the problem take a look at the various suggestions in this link:
    http://www.thexlab.com/faqs/trash.html

  • My Macbook is not playing sound unless i have headphones in. The light in the headphone plug stays on even when they are not plugged in. How can i fix this?

    My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?

    You might need to clean the headphone port (I was in the same situation and this worked for me).  Dirt, dust, and debris accumulate in the port and eventually the computer registers the debris as headphones being plugged in.  After cleaning the issue was resolved.

  • TS1630 My iPhone 4 says the headphones are in when they are not. I am not getting any sound from the speaker. Nothing appears to be in the headphone jack.  Any ideas anyone?

    My iPhone 4S  has no sound through the speaker generally, although the speakerphone does work.  It is indicating that headphones are in, when they are not.  Nothing appears to be in the headphone jack.  Resetting the phone has not resolved the problem.  any ideas what could be wrong?

    This just happened to my brand new iPhone5. I tried turning all the way off and then on AND plugging and unplugging. Only to discover that simply connecting to the charger worked!!!
    Very frustrating though!!

  • My contacts don't sync on icloud on my iphone some contacts disapear on iphone and some contacts hae been merged together to make one contact when they are not related. Can anyone help?

    My contacts don't sync on icloud on my iphone some contacts disapear on iphone and some contacts hae been merged together to make one contact when they are not related. Can anyone help?

    If you log into Icloud.com, are all your contacts correct there? If the answer is Yes, I would then turn contacts OFF on your phone, and then turn them back on. Do not merge, but replace with Icloud content.
    This is usually the quickest way to edit a bunch of contacts, through the web interface.

  • My iphone thinks it has headphone plugged in when they are not

    My iphone thinks it has headphone plugged in when they are not. What to do?

    https://discussions.apple.com/thread/1343532?start=0&tstart=0
    i'ts a known hardware issue

  • HT204150 I have just set up icloud and all my contacts are duplicated from Address Book! My new iPhone is also showing duplicate contacts even though they are not duplicated in my address book on my computer. Please can you help

    I have just set up icloud and all my contacts are duplicated from Address Book! My new iPhone is also showing duplicate contacts even though they are not duplicated in my address book on my computer. Please can you help?

    Also, what are the source of your contacts? are they created on the phone, or you synced from yahoo/hotmail etc.
    If thats the case, the circular arrow wont be visible but instead show "groups"
    Contacts from different accounts are not synced to iCloud.

  • I was woundering if apple fix ipod touches when they are not a year  old  and its cracked ??

    i was woundering if apple fix ipod touches when they are not a year old and its bing cracked

    A broken screen is not covered by the warranty since it is not due to a defect.  Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing

  • I recently deleted two albums off of my iphone via itunes but, they are still showing up on my phone, they are not albums that i have purchased through itunes, can someone help me figure out how to delete them please?

    I recently deleted two albums off of my phone using itunes, but when i went back onto my phone, they were still there and playable. they are not songs that I have purchased via itunes so can someone please help me figure out what is wrong so that i can fix the problem

    Hi, Abril_Perez17.
    This may be related to a new feature embedded in iOS7 that shows all purchased music by default.  Go to Settings > Music, then turn off Show All Music.  See if the issue ceases once the feature has been disabled.  This information is located on page 63 of the user guide below. 
    iPhone User Guide
    Regards,
    Jason H. 

  • Ipad saying earphones are in when they are not

    Can't get volume ipad saying earphones are in when they are not

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • SUS - Clients "up to date" when they are not

    OS X Server 10.5.6 running on PPC is being used as Software Update Server. I have let it download everything (258 packages) to the local server.
    All clients are "unmanaged." After a bunch of monkeying around I finally got my own client machine to see the server and find the 10.5.7 update.
    Now trying to get the next batch of test clients to work. One is 10.4.11 PPC, another is 10.5..6 MacBook. Both indicate my server's IP address in the Software Update application title bar, but after considerable "Checking" they respond as being Up to Date, when clearly they are not.
    How I've set things up:
    Server Admin:
    - Web is on and active (only the default domain on this machine)
    - Software Update is on, port 8088, Automatically Copy is checked, Automatically enable is checked, Purge ischecked. No bandwidth limits.
    - all packages have been downloaded and are enabled
    - DNS is not enabled
    Clients:
    - I used Terminal in each client manually and executed this line:
    sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://192.168.0.20:8088/index.sucatalog
    While I can see maybe the 10.4 PPC system possibly being incompatible (though I have read to the contrary), I don't understand why the 10.5 MacBook wouldn't work.
    I read other threads and google nuggets, but none seem to apply or help.
    Need some ideas. Thanks.
    -- gw

    On your server, run this in Terminal.app:
    changeip -checkhostname
    It should return:
    Primary Address = 123.45.67.89
    Current HostName = server.domain.com
    DNS HostName = server.domain.com
    where '123.45.67.89' is the IP address of your SUS and 'server.domain.com' is the FQDN of your SUS.
    If it doesn't, then fix your DNS first. Then change the HostName in Server Admin to the FQDN of the server. Then, in Terminal.app, run:
    changeip /LDAPv3/127.0.0.1 123.45.67.89 123.45.67.89 oldhostname newhostname
    where '123.45.67.89' is the IP address of your SUS and 'oldhostname' is the 'old' name of the server and 'newhostname' is the FQDN of the server.
    Then, on your SUS, check this file /Library/Preferences/SystemConfiguration/Preferences.plist by opening it in Property List Editor and looking for the keys:
    Root > System > ComputerName
    and
    Root > System > HostName
    They should both be set to the FQDN of the machine.
    Then on the clients, in Terminal.app, do (the line below may be wrapped because of length):
    sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://your.SUS.com:8088/
    where 'your.SUS.com' is the FQDN of your SUS.
    This will set the global prefs for Software Update for all users.
    Note that you do not have to include the 'index.sucatalog' as part of the URL, because if you do, Software Update will generate the URL as this: http://your.SUS.com:8088/index.sucatalog/index.sucatalog. Which of course will not point to the 'index.sucatalog' on your SUS.

  • Audio - toggle on/off multiple sounds even when they are not currently playing

    I am wondering if there is a way to stop toggle all sounds even if they are not playing.
    What I mean by that is I have several sound files that play one at a time when a slide comes in. I can toggle on/of the current sound but what if I want to toggle all sounds on/off in the compostion even if they are not playing so that when I go to next slide it will be on or off depending what was chosen on the previous slide?
    One of the problem would be that I do not want all sounds to be turned back on at the same time but only the current one but I still want to be able to turn off all the sounds if the user decides he does not want to hear sound while at the same time I want the sounds to load automatically on each slide if he has decided to have sound.
    Hope this makes sense.

    didn't have the time to test this code yet.
    but it should work.
    Html5 audio can not be accessed by class, it can only be accessed by id.
    so i made this code
    $( "audio" ).each(function() {
    var a = $(this).attr("id");
    var audioPlayer = document.getElementById(a)
        audioPlayer.pause();
        audioPlayer.currentTime = 0;
    this will find the id of the audios and pause them and reset the time to 0
    ( not really a way to officially stop audio )
    or you van just mute it with this code
    $( "audio" ).each(function() {
    var a = $(this).attr("id");
    var audioPlayer = document.getElementById(a)
        audioPlayer.muted = true;
    - Rob

Maybe you are looking for

  • Deprecated methods

    The following method has been deprecated. Does anyone know what it is replaced with? Also, is there a list of what has been deprecated and what the replacement method is and how to implement the replacement method? •     Warning(1886,24): setSelected

  • Missing "Discussion" link at bottom of thread

    The Jump to top of thread link below the last post in a thread is OK, but it really should be a repeat of the breadcrumb links at the top of the discussion pane, as it was in the old version of the forums. One click and I was back at the discussion s

  • Unable to disable plugins

    I was using mobile broadband to connect to the Internet. Because it was prepaid and video was what ate up the most MBs I disabled all the plug-ins such as flash player, realplayer etc...that allowed video to run on webpages. This worked just fine and

  • Two different methods for downloading a file using URL...

    I was just wondering if someone could shed some light on whether I should be downloading files using java.net.URL or java.net.URLConnection Here are two ways that I have found to work (and yes I realize that one is outputting to a stream and the othe

  • What is error code 3328

    What is error code 3328