Podcasts too fast

Although my music plays normally when I listen to my podcasts they are playing too fast. Anyone got any ideas?

From the Now Playing screen, tap the cover.
!http://images.apple.com/iphone/how-to/content/images/ipodpodcastctrls.png!
Set the playback speed:
Tap White playback speed icon with 1x. Tap again to change the speed.

Similar Messages

  • IPod Shuffle has started playing audio books and podcasts too fast.

    iPod Shuffle has started playing audio books and podcasts too fast.  What can be done?

    Some other iPods (that are not shuffles) have an onboard setting to change the playback speed for some types of iTunes media, such as audiobooks.  But a shuffle has no screen, to change such settings.
    First, do this to reset the shuffle, if you have not already
    http://support.apple.com/kb/HT1655
    If that does not help, you may want to do a Restore on the shuffle.  The Restore button is on the shuffle's Summary screen in iTunes.  This will erase the shuffle, reinstall its software, and set it to default settings.  The shuffle will be like it was when new, so this problem should be fixed.

  • Nano plays podcasts too fast

    my nano plays podcasts too fast as if they're speeded up. Is there a sync setting that will fix this?

    thanks. that was easy!

  • My itouch is playing podcasts too fast despite having done a restore to fix the issue, anyone know a solution?

    my itouch is playing podcasts too fast despite having done a restore to fix the issue, anyone know a fix?

    It sounds like the Podcast's playback speed was changed. You can change it by tapping the podcast artwork, locating the speed control that can be found under the right side of the scrubber bar. Then adjust as needed.
    B-rock

  • 5G iPod Nano playing podcasts too fast

    My iPod nano has started playing podcasts at a faster than normal rate, while the time elapsed bar at the bottom (I do not know the proper term for this) progresses in normal time. My music plays normally. What is causing this, and is there a way to fix it?    

    Not exactly sure, but click your ipod on the itunes sidebar and go to the first tab. Uncheck the checkbox that says "Convert higher bit rate song to _______ AAC". See if that helps. If not, on your ipod go to Main Menu > Videos and look for a settings screen.

  • Why are my podcasts running too fast

    my podcasts and audio books run too fast so the speech is too quick to listen to, my music seems ok - anyone experienced this problem or got suggestions for me?

    Slightly below the scrubber bar the is a box with either 1/2X. 1X or 2X.  Those are the playback speeds.  Tap on the box to change/cycle through the speeds.

  • My podcasts play too fast in my iphone

    I did not had a problem before but now with the same podcasts I use to listen to they play too fast. You can still understand them but it is not pleasant at all. Does anyone has the same problem and was able to solve it?

    It's likely you accidentally touched the button that speeds up playback to 1.5x.

  • My nano plays back itune podcasts at too fast a rate.

    Hi All!  My nano plays back itune podcasts at too fast a rate.  My iMac does not do this with the same podcasts.  If I have my nano connected to my iMac and use it (the nano) to playback thru my computer monitors- it's fine.  Unplug it and use earbuds and it's too rapid!?  Did my nano drink too much coffee?  Thanks, Michael

    O.K.  Finally figured it out...  Podcasts have a 1/2x, 1x and 2x speed setting on one of the windows that will change the playback speed.  Never Mind!

  • How can I fix corrupted audiobooks category--plays too fast and is gravelly?

    How can I fix corrupted audiobooks category--plays too fast and is gravelly? Other music categories are unaffected..

    On the audio book (and podcast) playing screen there is a playback speed selector. It is the box on the right hand side of the screen right below the scrubber bar. It say either 1/2X, 1X or 2X, the playback speeds. Tap the box to cycle through the playback speeds.

  • Audio book plays too fast on the ipad - how do i fix it?

    audio book plays too fast on the ipad - how do i fix it?

    While I don't listen to audiobooks on myh iPad, the following might apply in your case:
    When you navigate to the player controls in the iPod app, in older OS's, and perhaps still in the Music app in iOS 5, you will see a variable speed control on the right hand side of the scrubber bar. Sequential taps on that change the speeds.
    This does appear in spoken content only, I think, as I see it in podcasts all the time. It's not there for video or music content, so I'd expect it to appear for Audiobooks as well.

  • I ran Advance System Care 3 Disk Optimizer program and now my drop down menus are too fast. How do I slow them down

    I ran Advanced System Care3 disk optimizer program on my computer and now the drop down menus in Firefox open too fast. Mostly in the Bookmarks menu with nested folders. I went into the registry and changed all the "MenuShowDelay" data values back to 400(which were changed to 200 by the program. All the other windows programs drop down menus went back to the original speeds and are fine. Firefox did not change back to it's original delay speed. Where is the registry entry or configuration file for Firefox? How can I slow the menu down?
    Thanks,
    Tony

    I ran Advanced System Care3 disk optimizer program on my computer and now the drop down menus in Firefox open too fast. Mostly in the Bookmarks menu with nested folders. I went into the registry and changed all the "MenuShowDelay" data values back to 400(which were changed to 200 by the program. All the other windows programs drop down menus went back to the original speeds and are fine. Firefox did not change back to it's original delay speed. Where is the registry entry or configuration file for Firefox? How can I slow the menu down?
    Thanks,
    Tony

  • Recording iSight Video plays back too fast in Adobe Presenter/Office 2010?

    Adobe E-Learning Suite 2.5 installed over Microsoft Office 2010 Home and Student
    Running Presenter within PowerPoint detects and records using iSight. But the Playback is too fast, chipmonk like.
    Perhaps its an FLV codecs issue.
    Running Bootcamp 3.2 Software on Windows XP SP3 on an Intel iMac Core 2 Duo 2GHz 1,5GB Ram

    Hello,
    Do you mean that when you see the video inside Video Creator, slide 10 appears for a split second and then jumps to slide-11?
    Can you record the same scenario in diagnostic mode and send us the logs.
    Follow these steps -
    1. Close Video creator if it is already opened
    2. In Windows > Programs > look for "Troubleshoot Adobe Presenter Video Creator"
    3. Launch the same and record the exact same steps
    4. Stop recording > Ensure that the issue has been reproduced.
    5. Close the application.
    6. While closing, it will prompt you to send us an email with collected log reports.
    Kindly send the logs. We will go through it and get back to you.
    It will also be great if you can send us the presentation in which the issue is reproducible.
    Regards,
    Mukul

  • How should I debug a PVM that is crashing & rebooting too fast ?

    I have a newly created oel4u6 PVM that appears to be starting but then crashing & rebooting too fast and I don't know how to best debug it. The vm is a P2V'ed oel4u6 HP Blade that successfully boots as a HVM but I can't seem to get it to fully start as a PVM (I have several clones that I am working with to contrast/compare).
    I can't seem to get the console to start fast enough to show me anything useful as the crash is within seconds.
    I likely can flip the VM back to HVMPV mode or HVM and boot to the original kernel but if I boot to another kernel I am not sure what files in the VM (if any) may give any insight on the failed starts/crashed.*
    Anyone have any ideas/recommendations on how to debug this?*
    The message from xend.log is:
    [2013-03-31 07:45:32 3273] WARNING (XendDomainInfo:2131) Domain has crashed: name=0004fb0000060000b0d58463f621a2a3 id=37.
    [2013-03-31 07:45:32 3273] ERROR (XendDomainInfo:2265) VM 0004fb0000060000b0d58463f621a2a3 restarting too fast (Elapsed time: 1.654993 seconds). Refusing to restart to avoid loops.
    [2013-03-31 07:45:32 3273] ...
    More details as to the specific HVM kernel & PVM kernel & the process I used to get the PVM to at least get to load grub are in this thread looking for a good step-by-step guide on the recommended process:
    Good guide to convert oel4 hvm to pvm on OVM 3.2.1 ?

    Choose Utilities from the Finder's Go menu, open the AppleScript Editor, and run:
    do shell script "mv '/System/Library/oldname' '/System/Library/newname'" with administrator privileges
    (126015)

  • Can't burn disc via iTunes. Burn speed too fast. AGAIN!

    "iTunes can't burn this CD because the burn speed is too fast for your CD burner or media. Choose a lower speed in the burning pane of iTunes Preferences then try burning again".
    I have been having on going problems burning CD’s in iTunes for YEARS, and I know I am not the only one. I get the error message above. Having checked the forum at the time, and posted for help, I am know there is no real solution except to change brand of disc.
    Thing is, now I can’t get ANY brands to work. I’ve been through Verbatim, Maxell, JVC, Sony, but none work. The only brand that would work were TDK audios which I can no longer find anywhere.
    I know its not the burner, as Toast works fine, and I know I am not alone. Anyone got any ideas?
    Even after years Apple seem to be blanking this question. It’s very frustrating not being able to burn my purchased itunes downloads to disc.

    To anyone who is interested I think I may have found a possible solution. When you put a blank disc in the drive, wait about 30-60 seconds or so for it to stop spinning before burning.
    This seems to work. It's a bit sticky but eventually works. I tried both TDK & Maxwell discs and 9 out of 11 worked. Absolutely no reason why the other 2 didn't, but it's a lot better than none.

  • DVD drive spinning far too fast on Equium

    I have a problem with my DVD disc drive spinning far too fast to me. I have Windows XP on my Toshiba Equium laptop.
    I haven't found any way to set CD / DVD spin speed.
    I don't know if there is any, but I have used such feature in an other computer, and I would really much like to slow down the speed.
    The problem with speed is not malfunction.
    I don't face the problem with DVD:s, but the drive is too effective with CD:s, its literally too powerful.
    The speed and noise are insane. If I touch the computer or the table where computer is, the shaking hurts my hands.
    It's like a motor saw, and also sounds a bit loud.
    I can't hear the game I play while CD is spinning.
    I wonder the sturdy construction of my computer, while it's still not broken.

    Hello
    I don't know which notebook model do you have but Toshiba has designed small tool for such purposes. It is acoustic silencer. When you watch DVD movei or when you listen music CD you can switch into silent mode and you will not hear that DVD drive works.
    Visit Toshiba support page and check if this tool is available for your notebook model too.
    Bye

Maybe you are looking for

  • High Resolution Mode no longer works with new vers...

    For years I used Skype in high res mode (1280X720) with auto answer to look at the veiw from may vacation house window. This worked great. The picture quality was terrific and the connection was always stable. However, after I upgraded the Skype vers

  • Workflow notification in Inbox

    Hi,   The CQ environment is a shared environment where multiple applications are hosted. Our application uses a customized workflow where all the steps except the last one are OOTB. The last step is implemented in our application as a process step. W

  • Client Cost Allocation to COPA Failed

    Hey guys... when we try to Client Cost Allocate to COPA using TR : keub.. the test run is ok... but the actual run fails with the following error.. pls help Runtime Errors         PERFORM_TOO_MANY_PARAMETERS   Except.                CX_SY_DYN_CALL_PA

  • Logical Standby table not supported 11.2.0.1

    I have a table with CLOB in primary and runs the SQL to determine which tables are unsupported. They, nor I, can see why this table is unsupported. Please let me know what I am missing. Are there additional steps to see why? Please also see the DDL f

  • Elements 10 and Adobe Revel

    Do I have to upgrade to Elements 11 in order to add additional images to my gallery that was moved to Adobe Revel? I'm currently running Elements 10 and my new images dont seem to be uploading.