Podcasts volume turned down...

I've uploaded several podcasts- they download fine to iTunes and appear to work- but when you try to watch/listen to them on the .mac page, the volume in the quicktime controls is turned all the way down. I spent a lot of time playing with my speakers before I realized that the volume control ON THE QT controls was there and it was turned all the way down. Turn it up, and all is well. Why would all of our podcasts be turned down? Is the a setting in iweb/.mac to turn them up globally? thanks
http://web.mac.com/beachschool/BeachSchool/Human_Body_PSA/Human_BodyPSA.html

Stephanie Griffin wrote:
I realized that the volume control ON THE QT controls was there and it was turned all the way down.
When you add the video to your podcast page (in iweb), you see the same controller bar with the little speaker on the left (it's QT volume control); you can set the volume there too.

Similar Messages

IPad volume turning down itself

iPad volume turning down itself constantly,sometimes it is even hard to mannually put it back up. tried reboot, doesn't work. My iPad repair expired. Any solution?
Thanks!

There might be dirt under the rocker switch for the volume control. There are schematics online for the iPad that will show you how to take it apart if needed. Or you could use a fine toothbrush to try and clean under it.

My iphone volume turns down randomly own its own. It will turn up on the buttons, but will turn back down by itself and i have to fight the volume to keep it from muting. Plus, the mute logo stays on the screen when it mutes itself. Please help.

My iphone volume turns down randomly own its own. It will turn up on the buttons, but will turn back down by itself and i have to fight the volume to keep it from muting. Plus, the mute logo stays on the screen when it mutes itself. Please help.

Unfortunately this is probably a hardware issue and you will need to take it to an Apple Store.

Creative Audigy 2 and Windows Vista: Sound volume turns down when I try to turn it

I have a strange problem with my audio in Vista. I have a Creative Audigy 2 and Creative 6700 speakers. My full system specification is below but please note I did not have this issue in my previous Vista build - its only happening since I did a reinstall. Anyway, when I swich on the speakers using the remote control unit for the 6700 speakers the sound comes on but then it turns down. I have to then increase the volume by a large amount for it to start playing sound again and then turn it down to listening volume. This issue is not application specific - it happens in everything: Winamp, WMP, games, etc etc?I'm using [color="#000000"]Creative Sound Blaster Audigy series Vista Driver 2.2.0002 and I've tried reinstall several times. I've tried doing diagnostic startup etc using msconfig in case something was conflicting and its still happening.
Has anyone got any ideas whats going on?Many thanks for your help!?System specifications:?MSI K8N SLI (MS-785 v..0) nForce4 Rev. A3
BIOS Phoenix Technologies 6.00PG
AMD FX-60 with Thermalright Ultra-20 Heatsink &?Scythe?20mm fan
Bus speed: 20MHz, Multiplier: x.0, Core Speed: 22 MHz
Corsair 2Gb: 2x Gb PC3200 RAM 28 bit dual channel mode & T command rate (2.5-3-3-8) with Thermaltake heatsinks
XFX 8800 GTS 640Mb XXX Edition
Hauppauge Nova T-500 dual tuner digital TV card
Seagate Barracuda 7200.9 500Gb
Optiarc AD-770S SATA DVD Writer
Xclio X2S4P4 750WModular SLi U-Quiet PSU
Lian Li PC-A0A aluminum case
Dell E228WFP (Two in dual display)
Microsoft Wireless Laser Mouse 8000
Microsoft Digital Media Pro keyboard
Windows Vista Ultimate 32bit Edition?Message Edited by DistortedVision on 05-25-200706:4 PM

Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

Random volume turning down

The ringer volume randomly turn down and i have no audio on calls and the display said i have headphone plugged in when i do not.

There might be dirt under the rocker switch for the volume control. There are schematics online for the iPad that will show you how to take it apart if needed. Or you could use a fine toothbrush to try and clean under it.

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

ITunes opens with volume turned down

For the past couple days everytime i open up iTunes it gives me a popup that the volume in itunes is turned all the ways down. i usually never touch the volume in itunes, rather the system volume, so i dont know why it "mutes" itself...

I can't help, but I noticed the same thing.... and by the way, I'm on a Mac
Message was edited by: multispacy

Volume turns down on its own

Hi,
I have a weird problem with my wife's iMac Dual Core.
The volume has started turning itself down to zero after a short while of use, leaving the Speaker < ))) indicator display on screen, but with no volume indicated.
If I use the menu bar volume at the top right to increase it, it immediately decreases back to zero.
If I do a reboot and go back in again, it seem to fix for a short time, but. the decreases down again.
I suspect its something to do with the keyboard Vol down button bring stuck in some way on the (wireless) UK Keyboard we use, but the Keyboard Viewer does not show these keys so cant tell its its being "pressed"... Another reason for suspecting its a "stuck" key is that it does it in a click-click-click tempo (decreasing) similar if not identical to the keyboard repeat interval.
The weirdest bit is that the volume keys and controls work normally after reboot... for a short while...
No other keys appear to be affected, and the rest of the system appears to be working fine.
Thanks in advance for any guidance...
Martin
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.9f4
AppleWirelessKeyboard:
Name: AppleWirelessKeyboard
Address: 00-0a-95-xx-xx-xx
Type: Keyboard
Services: Apple Wireless Keyboard
Paired: Yes
Favorite: No
Connected: Yes

Greetings from Mexico!
So glad to run into your post as I have a similar problem: the volume up key appears to be randomly stuck, such that every now and then, on its own, it will go all the way up to the highest setting and remain there. The gray volume indicator persists on my screen, and the only way to make it disappear is to reboot the computer.
I attempted your solution and the problem seemed to go away and now it's back. Since the file you mentioned is gone...
com.apple.soundpref.plist
... I don't know where else to tinker.
Curiously, if I disconnect my USB keyboard, the problem goes away, but it manifests itself so randomly I seriously doubt it's a hardware problem.
Left to try is borrowing a keyboard from office and replacing it, but I hope somebody on this forum has a good answer.
Regards,
Paco Ojeda
Puerto Vallarta, Mexico

Why does sound volume turn down to zero automatically

I just upgraded to IOS5. I set my sound volume to high in settings, but I notice that it does not ring soon after that. When I look at the settings again, the speaker volume setting has moved completely to the left (low). Is anyone else having this problem.

Yes, I have seen this problem. Sometimes it happens, sometimes it does not.

Turn down the volume of built-in speaker before playing music

So I was wondering if there was any way to turn down the volume of the built in speaker prior to playing music/video. I imagine that if I'm REALLY quick and pause the action, I can turn it down, but I'd rather not have to race against time.
The context for this, is the desire to show someone else video on the iPhone (say a National Geographic video podcast) without the audio blasting forth.
Any ideas?

So you're saying the phone doesn't remember the previous setting you had it at and jumps up or something...?
..or you want to hit play and have it not play so you can adjust the volume first...sorry can't help if that's the case. It kind of doesn't make sense from a UI perspective, when I press play or start a video I want it to play....different strokes for different folks tho

USB Mic Volume automatically turned down by OSX??

I have a Plantronics USB Headset that I use for skype and recording my podcast. It seems when I begin talking into the mic the volume is lowered automatically by OSX. I can even watch it get turned down when I have the input volume settings open in the System Preferences. It makes the input so low that I sound noticeably quieter then everyone talking to me through skype.
Any ideas on how to fix this?
Thanks,
Kevin

Hi.
I was having the same problem and was about to bump this question, but I might have just found the solution on the skype forums and I thought I'd mention it so we can both test it to confirm if it works.
Basically, you need to add something to a file. It's in Library/Application Support/Skype inside your home directory. It's called shared.xml. Near the bottom of the file, you'll find section called <VoiceEng>. You need to exit Skype and then add a line to that section, like so...
<VoiceEng>
  <AGC>0</AGC>
  <MicBoost>
Etc. I've only tested this by calling the Test Call number so I can't say for sure that it works. Maybe you can test it too.
I got this information from here...
  http://forum.skype.com/index.php?showtopic=57766
Hope this helps.

Do you have any ideas on how I may resume my TV volume to full capability after disconnecting the HDMI cable and Macbook Pro to watch DVD's somehow my tv volume got turned down and I can't get it to restore fully. Any constructive ideas?

I used the HDMI cable from my Macbook Pro to my Panasonic TV to watch DVD's but I had no sound, so I used the community suggestion in going to system preferences>sound etc. followed the instructions and got great sound in fact very loud to my TV so I turned down the volume from my TV remote control. After watching the DVD's I disconnected the HDMI from my TV and realized for some reason my TV volume now is not returning to it's full volume even though I've tried to turn it to it's maximum. Any constructive assistance is truly appreciated. Thanks.

Hey, it's a simple fix that should give most people what they want until there is full VZW support: the ability to use their card with the VZAM software. I didn't see anyone else offering that suggestion... If you don't want to use it, you don't have to.
At the very least, this does seem to prove the theory that this is an issue with the 32/64bit compatability that some have refuted.

Itunes volume turned all way down

hey today i receave a message on my macbook pro that,(itunes volume turned all way down)
i had tring to solve it bye moving plist file in prefrence but there is no flie like this com.itunes.apple.plist
please help guys to solve it

hey guys please help

IPhone 4S can not hear music cannot turn down volume

IPhone 4S cannot hear music playing cannot turn down volume or in control center... PLEASE HELP!!

I asked that question in regards to your comment about a red zone in volume. I do not have that on my phone.
You state that you have already done a restore, so the only other step in troubleshooting is to make an appointment at the Genius Bar to have the device checked by Apple.

When I pan left, the volume is turned down instead of being panned left???

When I pan left, the volume is turned down instead of being panned left???
The instrument strip and output 1-2 are both in stereo in my environment. I don't get it-any ideas anyone?
I'm using logic 7.2.3
Thanx in advance
!

Thanks for your response.
hrmmm..... I don't see any "Pan Law". I'm running Logic 7.2.3 btw.
I think it might be my audio drivers.
"I have a FW 410 interface, everything seems to work fine except for the panning. Instead of panning properly, the volume is turned down when I pan left and volume is raised when I pan right. This only happens when I have the FW 410 interface selected in the audio/hardware setup. Panning under the built-in audio works fine so I would imagine it's the M-Audio drivers for the FW 410 that need a working update for Leopard."
Can anyone confirm this?
Thanx again in advance,
Paul

Podcasts volume turned down...

Similar Messages

Maybe you are looking for