Poe881 Router and Cisco Inline Power (pre-standard PoE)
I have a number of 881 Routers and 79x0 IP Phones. These phones use "Cisco Inline Power", aka "pre-standard PoE". In other words, they are not compatible with standard 802.3af PoE.
It would be possible for me to install a daughtercard and DC adapter in the 881 routers and provide PoE to two of the ethernet ports. My question is whether the 881 (when equipped for PoE) will support Cisco Inline Power, or if it will only support 802.3af.
For reference, the 200 and 300 series Small Business switches support these phones with a software upgrade. See this link: https://supportforums.cisco.com/document/71841/200-and-300-switches-now-supports-cisco-pre-standard-poe-legacy-poe
Many thanks,
Tom
My question is whether the 881 (when equipped for PoE) will support Cisco Inline Power, or if it will only support 802.3af.
Hi Tom,
I don't have an 880 but I have a large fleet of 890 and all of them have PoE and I know these 890 support 802.3af easily.
Similar Messages
-
How many pre-standard POE schemes by Cisco?
I came across the 3Com NJ220 switch-in-a-wall-jack that claimed it could be powered by "some Cisco proprietary Power over Ethernet schemes". Does anyone know what these schemes are? Are all the older Aironet products (say AIR-PWRINJ2 and AIR-PWRINJ3) using the same pre-standard POE scheme?
Technically, they have cards that put out different levels of power. The following URL lists some of the different blades and switches and how much power they put out.
The reason for the difference is that once 802.11af was in the final stages, Cisco increased output to 15W as required by af on some switches such as 3550s, but it is still technically "pre-standard" since it did not meet all the specs exactly.
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a008039e541.html
-Eric -
Does Cisco inline power work w/ LWAPP?
We have a bunch of old 3524XL's that are providing power for our Autonoumous AP's.
Does anyone know if they'll work after we convert the AP's to LightWeight?
thanks.Kevin,
The Cisco pre-standard power will work to power the AP's, but the WLC's will have a problem with this. They will see that the AP is not being provided the 15.4W that is the 802.3af standard and will not turn on the radios, claiming there is not enough power.
The way to fix this is, in 3.2 go to the command line and issue the command:
config ap power pre-standard enable all.
In 4.0 you can issue the command:
config ap power pre-standard
OR from the GUI you can go to the details of hte AP, and there are checkboxes for pre-standard and injector. -
Are 300 Series switches compatible with pre-standard PoE detection in old Cisco phones?
Are 300 Series switches compatible with pre-standard PoE detection in old Cisco phones? They don't seem to be (a 7902G won't power on when connected to an SF302-08MP with firmware version 1.1). Is any special configuration needed on the switch to enable this detection?
Please note that the 200 and 300 Series switches now support Cisco Legacy POE as of September 2011, allowing it to deliver power to 7960, 7940, and other pre-standard phones and APs. Details provided at the following link:
https://supportforums.cisco.com/docs/DOC-18337 -
Connecting 2 routers: T1 Router and Cisco Router
Hi, thanks for reading this.
My company has a T1 line that goes into the provider's Netopia router. I'd like to connect that router to our Cisco 1811 router to take advantage of the firewall, DHCP, VLAN, and NAT features. So, this is what I'm trying to do:
Internet -- T1 Router -- Cisco 1811 -- Servers and Workstations
The Netopia router is a T1 router with 1 WAN port and 8 built-in Ethernet ports. The Cisco 1811 has 2 WAN FE ports and 8 Managed Switch ports.
First of all, I'd like to ask if this is even possible to do. If it is, please tell me how to physically connect the routers (what port to what port, and what kind of cable).
Thank you.I don't know the Netopia routers but what you want to do should be possible. On the physical level you have to connect one of the Netopia ethernet ports to one of the WAN FE ports, probably using an ethernet cross-over cable.
Now comes the fun part: configuration. -
How do I cure - low inline power on 2112 PoE port ?
I have a 2112 WLC with LAP connected directly to PoE port 8.
Controller Monitor reports :
AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:3a:99:67:53:50 Cause=Low in-line power
THe Advanced tab on the AP configuration does not show any PoE power state.
How can I run this AP on tthe controller port?
WLC is AIR-WLC2112-K9
Product Version.................................. 6.0.199.4
RTOS Version..................................... 6.0.199.4
Bootloader Version............................... 4.0.191.0
Emergency Image Version..................... 6.0.199.4
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE
1 Normal Forw Enable Auto 100 Full Up Enable N/A
2 Normal Disa Enable Auto Auto Down Enable N/A
3 Normal Forw Enable Auto 100 Full Up Enable N/A
4 Normal Disa Enable Auto Auto Down Enable N/A
5 Normal Disa Enable Auto Auto Down Enable N/A
6 Normal Disa Enable Auto Auto Down Enable N/A
7 Normal Disa Enable Auto Auto Down Enable Enable (Power Off)
8 Normal Forw Enable Auto 100 Full Up Enable Enable (Power On )
AP Model...... AIR-LAP1131AG-E-K9
AP Image...... C1130-K9W8-M
IOS Version... 12.4(21a)JHB1Hi,
Set power injector state to 'over-ride' , if we are not able to see this on the AP Advanced.. kindly paste the screenshot here..
Regards
Surendra -
SD208P PoE and Pre-Standard Cisco IP Phones (eg. 7960)
Well, I've been learning the eccentricities of Cisco's product lines the hard way! Here's my situation:
I've taken over for an office that has a hosted Cisco IP phone system using a variety of what seem to be older Cisco phones (the one at my desk is a 7960) these are normally powered by the PoE that gets delivered by some Cisco Catalyst 3750X switches. Our office has grown to the point where we've had to place a few people into some semi-jury rigged seats in areas with limited network drops. As a result I need to do something creative to get phones over there.
I first went out and purchased a small 8 port switch with 4 PoE ports on it from a competitor and this was where I discovered that the models of Cisco phones I had needed something generally referred to as Cisco Pre-Standard PoE (or some variation on that theme). I returned the switch and after doing some research decided to buy a Cisco SD208P switch, which a few messages out on the Interwebs led me to believe should be able to power the switch (possibly a firmware upgrade would be needed).
So I got the switch today, and plugged my phone into it and... nothing. No signs of life on the phone. (And nothing as simple as plugging it into one of the non-PoE ports on the switch). I went online to try and find a firmware update, and couldn't find anything. It's also an unmanaged switch, so I'm not even sure how I'd update firmware on it if I wanted to (and there's nothing in the manual).
I went back and double-checked some of the sources that may have led me to believe that this would work and I found what turned out to mostly be people recommending this as a possible option, but not strictly saying it worked for them. I found one person saying it worked for some Cisco phones, but he didn't specifically say they were prestandard ones. Lastly, there is mention of 200 and 300 series switches being firmware upgradable to support prestandard PoE, but from looking around Cisco's site I'm not 100% sure that this switch is actually part of the 200 series despite the number in the name. It seems to show up in a Small Business Unmanaged Switch category online rather than in any proper series.
So, the question is - have I just missed something somewhere? Is there any hope for me? Or do I have to send this back and go for something else? If so, what's recommended? Perferably something in that price range or we might just give in and... gasp... buy power supplies.
Thanks,
Chris.Hi Chris,
The SD208P is an unmanaged switch that does not have any web interface and you will not be able to upgrade firmwares on this switch. The unmanaged switch that you have gotten will only support 802.3af POE standard and does not support the Cisco pre-standard. Also, you did mention the 200 and 300 series switches which are managed switches and with the latest firmware of 1.1.2.0, you will be able to power up your 7960 phones. The models are called SF200, SF300, SG200, and SG300. Please make sure to get the models with the letter "P" for POE. For example, you can get the SF300-24P. I hope this information is helpful.
Thanks,
Brian Ng -
Hi,
Does the new ESW switches support "Cisco Inline Power" Some Service Providers are using CP-7940/60 with SIP image as a service and need switches that automatically detects that the device only support Inline Power..
regards
/BjornThe ESW 500 series of switches does power up the 7960 / 7940 phones (pre standard) via POE.
-
Recording for Cisco IP Phones and Cisco C90 Codec
Hello
We are looking for a solution that is capable to record both Cisco IP Phones and Cisco Codec C90.
We are using CUCM 9.X for IP Phones and VCS 7.X for Cisco Codecs.
Is their any third party solution available for both the requirements or do i have to go with TCS and any other third party recording solution.
Thanks & Regards
Aniket PatilMy reply may be too late to be of any help to you, but for the benefit of others:
Be sure you understand the different types of PoE out there. The Linksys PoE switch only supports the newer IEEE 802.3af PoE standard.
The 7940, 7960, 7905 and other older Cisco phones only support Cisco pre-standard PoE and thus will not work with the 802.3af Linksys Switch.
To use this switch, you will need to make sure you are using the newer 7070, 7961, 7941 phones with support both pre-standard and 802.3af PoE.
All the best,
John -
Aironet 1100 / 802.3af Power Over Ethernet (POE) Support
I was under the impression that the Aironet 1100 supports 802.3af POE. I purchased a NetGear FS108P POE switch, however, when I plug in the 1100, it does not receive any power.
I have seen references in the documentation to a Cisco inline power injector and a Cisco Catalyst switch that can provide POE to the 1100 and maybe they will work, however, will the 1100 only work with those devices?? If so, it would seem that the 1100 really doesn't support the 802.3af standard and that Cisco's implementation of POE is proprietary.
Any input would be appreciated.
Thanks,
MichaelHi Michael,
As you have discovered (unfortunately) is that the 1100 only supports Cisco Pre-standard PoE :( Have a look;
Single 802.11g radio offering 54 Mbps of capacity
2.4 GHz integrated diversity dipole antennas
Available in an autonomous version only
16 MB of memory with 8 MB of storage
Operating temperature range of 32 to 104?F (0 to 40?C)
**Inline power support (Cisco pre-standard)**
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps4570/prod_brochure0900aecd8035a015.html
The good news is that either of the options you listed will work just fine. I would go for the power injector probably just for neatness sake.
POWERING OPTIONS
The Cisco Aironet 1100 Series can be powered either locally using the AC-DC power adapter, or over the Ethernet cable when coupled with a device capable of delivering in-line power, such as an in-line power-capable Cisco Catalyst? switch, Catalyst in-line power patch panel, or Cisco Aironet Power Injector.
The AC-DC power adapter is included with the access point and can also be ordered as a spare part. The Cisco Aironet Power Injector can either be configured to the order or can be ordered separately.
You can use either;
AIR-PWR-A= Cisco Aironet Power Supply-Input 110-240VAC, Output 48VDC, 380 mA-for 1100 and 1200 Series
AIR-PWRINJ3= Cisco Aironet Power Injector for the 1100 and 1200 Series Access Points
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_data_sheet0900aecd8045690f.html
Hope this helps! And good luck!
Rob
Please remember to rate helpful posts..... -
Cisco 6921 - Inline Power Capable?
I am trying to determine if Cisco 6921 phones are actually compatible with Inline Power (Cisco pre-standard).
I have seen multiple data sheets from Cisco that say that they are, and then others that say that they only support 802.3af. They are 6.3w phones, so I'd assume they support pre-standard, but I am not 100% sure without having one in front of me. Does anybody know?
Thanks!Wrong forum, should be "IP Telephony". You can move the posts using the control panel on the right".
Anwyay, that may also depend by the specific switch you have. Check:
https://supportforums.cisco.com/message/3581321 -
Site to Site VPN between ASA 5505 and Cisco 800 router
Evening all,
Hoping that someboy can see the error of my ways. It seems very like the problem that i read here: https://supportforums.cisco.com/thread/2016300
We have a cisco 800 in a remote site which we wanted to use for a site to site vpn. Went through the steps on the ASA 5505 and the 800 and have got to the stage were the tunnel is up and connected. Getting traffic through it is another matter. Remote network is 172.20.224.0/20 and the server network behind the ASA is 192.168.168.0/24. The tunnel does intiate when you send traffic from 172 ......to 192....... Both the ASA and 800 report the tunnel is up. If i look at the stats using ccp on the 800 i can see the encapsulation packets graph shooting up but nothing cominbg back. I did packet captures on the 5505 and could not see anything coming from the tunnel so i dont belive its making it to the ASA. Here is the config from the 800:
Building configuration...
Current configuration : 6488 bytes
version 12.4
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname hhp-sty-backup
boot-start-marker
boot-end-marker
logging message-counter syslog
logging buffered 4096
enable secret 5 $1$jI1i$/kZbRk2WHD5h0HtfuQVej1
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa authorization auth-proxy default local
aaa session-id common
crypto pki trustpoint TP-self-signed-1347488939
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1347488939
revocation-check none
rsakeypair TP-self-signed-1347488939
crypto pki certificate chain TP-self-signed-1347488939
certificate self-signed 02
30820255 308201BE A0030201 02020102 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31333437 34383839 3339301E 170D3032 30333031 30313336
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 33343734
38383933 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100E714 7B0ADB41 19F60528 A8A5C43B 5CD2D1CD DCCF2E08 8B38D444 36EAB9B7
0E93CEF7 660F979E E27915B9 E44812A5 794EA03D BA66752B FD0F7EBF D6342513
D6410E4E 098CE838 C3BADD0A 5F3505FE 22CA776F 89B19510 F0852225 3600F046
4D57D2E2 FE4AAD1E 8BE4BF80 7B27369E BFA65160 BC769BC9 00A13741 E336D0EA
8A810203 010001A3 7D307B30 0F060355 1D130101 FF040530 030101FF 30280603
551D1104 21301F82 1D686870 2D737479 2D626163 6B75702E 796F7572 646F6D61
696E2E63 6F6D301F 0603551D 23041830 168014FA 4A8C4DF6 629638DE 87D7B60A
0F5BB40F EA6AED30 1D060355 1D0E0416 0414FA4A 8C4DF662 9638DE87 D7B60A0F
5BB40FEA 6AED300D 06092A86 4886F70D 01010405 00038181 00BBE577 6EF63FE7
789766D5 37841812 298D4885 1CD06D07 4C625369 C3403106 89EE1398 73495432
66C49CB1 36A5B2F8 D77A8C46 5AFE4112 EA5917D9 81542640 80EF2D36 54A85CC6
C3FFFFB8 39A648DD 2ABA2B13 4137BE07 760E46C0 74401DA7 482E3FA2 A64B70FF
447AA1B2 52E37240 29987085 532BBE3B C2E2E54A 54CA1D13 0E
quit
dot11 syslog
ip source-route
ip dhcp excluded-address 10.10.10.1
ip dhcp pool inside
ip dhcp pool lan_network
network 172.20.224.0 255.255.240.0
dns-server 8.8.8.8 8.8.4.4
default-router 172.20.224.1
lease 7
ip cef
no ip domain lookup
ip domain name yourdomain.com
password encryption aes
username pix privilege 15 secret 5 $1$Z.wA$lBmj36AJx/cbK1RjmfGJh1
username admin privilege 15 password 0 434Zaty
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp key password address 217.36.32.222
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto map SDM_CMAP_1 1 ipsec-isakmp
description Tunnel to217.36.32.222
set peer 217.36.32.222
set transform-set ESP-3DES-SHA
match address 100
archive
log config
hidekeys
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
dsl operating-mode auto
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 172.20.224.1 255.255.240.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
no cdp enable
ppp authentication chap callin
ppp chap hostname B6*******.btclick.com
ppp chap password 0 H*******
crypto map SDM_CMAP_1
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source route-map SDM_RMAP_1 interface Dialer0 overload
access-list 1 remark CCP_ACL Category=16
access-list 1 permit 172.4.0.0 0.240.255.255
access-list 10 permit 195.12.1.35
access-list 10 permit 172.4.0.0 0.240.255.255
access-list 100 remark CCP_ACL Category=4
access-list 100 remark IPSec Rule
access-list 100 permit ip 172.20.224.0 0.0.15.255 192.168.168.0 0.0.0.255
access-list 101 remark CCP_ACL Category=2
access-list 101 remark IPSec Rule
access-list 101 deny ip 172.20.224.0 0.0.15.255 192.168.168.0 0.0.0.255
access-list 101 permit ip 172.4.0.0 0.240.255.255 any
route-map SDM_RMAP_1 permit 1
match ip address 101
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^C
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN CREDENTIALS
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL
NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
^C
line con 0
no modem enable
stopbits 1
line aux 0
line vty 0 4
access-class 10 in
privilege level 15
password 434Zaty
transport input telnet ssh
scheduler max-task-time 5000
end
Any help will be most gratefully recieved.Rick,
Thanks for replying. Here is the output from the 800 Show Crypto command:
interface: Dialer0
Crypto map tag: SDM_CMAP_1, local addr 81.136.160.237
protected vrf: (none)
local ident (addr/mask/prot/port): (172.20.224.0/255.255.240.0/0/0)
remote ident (addr/mask/prot/port): (192.168.168.0/255.255.255.0/0/0)
current_peer 217.36.32.222 port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 10928, #pkts encrypt: 10928, #pkts digest: 10928
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 2, #recv errors 0
local crypto endpt.: 81.136.160.237, remote crypto endpt.: 217.36.32.222
path mtu 1500, ip mtu 1500, ip mtu idb Virtual-Access2
current outbound spi: 0x0(0)
inbound esp sas:
inbound ah sas:
inbound pcp sas:
outbound esp sas:
outbound ah sas:
outbound pcp sas:
interface: Virtual-Access2
Crypto map tag: SDM_CMAP_1, local addr 81.136.160.237
protected vrf: (none)
local ident (addr/mask/prot/port): (172.20.224.0/255.255.240.0/0/0)
remote ident (addr/mask/prot/port): (192.168.168.0/255.255.255.0/0/0)
current_peer 217.36.32.222 port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 10928, #pkts encrypt: 10928, #pkts digest: 10928
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 2, #recv errors 0
local crypto endpt.: 81.136.160.237, remote crypto endpt.: 217.36.32.222
path mtu 1500, ip mtu 1500, ip mtu idb Virtual-Access2
current outbound spi: 0x0(0)
inbound esp sas:
inbound ah sas:
inbound pcp sas:
outbound esp sas:
outbound ah sas:
outbound pcp sas:
and this is the running config frm our ASA at HQ:
Result of the command: "sh run"
: Saved
ASA Version 8.2(1)
hostname secure-access
domain-name hhp.com
enable password UWWykvGjAPmxufUo encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.168.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group BT
ip address 217.36.32.222 255.255.255.255 pppoe
interface Vlan12
nameif DMZ
security-level 50
ip address 192.168.169.1 255.255.255.0
interface Vlan22
nameif Wireless_HHP
security-level 100
ip address 172.16.36.1 255.255.254.0
interface Vlan32
nameif CNES
security-level 100
ip address 187.187.168.1 255.255.0.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 12
interface Ethernet0/3
switchport access vlan 22
interface Ethernet0/4
switchport access vlan 32
interface Ethernet0/5
switchport access vlan 12
interface Ethernet0/6
switchport access vlan 12
interface Ethernet0/7
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns domain-lookup DMZ
dns domain-lookup Wireless_HHP
dns domain-lookup CNES
dns server-group DefaultDNS
name-server 192.168.168.2
domain-name hhp.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network NET-cnes_HHP-Sty
network-object 172.20.224.0 255.255.240.0
object-group network NET-cnes_HHP-Balivanich
network-object 172.20.192.0 255.255.240.0
object-group network Oak-DC1
network-object 192.168.168.2 255.255.255.255
object-group network Maple-DC2
network-object 192.168.168.3 255.255.255.255
object-group network HHP_Domain_Controllers
group-object Oak-DC1
group-object Maple-DC2
object-group network PC-Support
network-object 187.187.60.1 255.255.255.255
network-object 187.187.60.2 255.255.255.254
network-object 187.187.60.4 255.255.255.254
network-object 187.187.60.6 255.255.255.255
object-group network ELM-ActiveH
network-object 192.168.168.6 255.255.255.255
object-group network Pine-GP
network-object 192.168.168.12 255.255.255.255
object-group network HHP_Application_Servers
group-object ELM-ActiveH
group-object Pine-GP
object-group network Fern-TS1
network-object 192.168.168.4 255.255.255.255
object-group network Fir-TS2
network-object 192.168.168.5 255.255.255.255
object-group network HHP_Terminal_Servers
group-object Fern-TS1
group-object Fir-TS2
object-group service Global_Catalog_LDAP
description (Generated by Cisco SM from Object "Global Catalog LDAP")
service-object tcp eq 3268
object-group service Global_Catalog_LDAP_SSL
description (Generated by Cisco SM from Object "Global Catalog LDAP SSL")
service-object tcp eq 3269
object-group service UDP-389
description UDP port for LDAP
service-object udp eq 389
object-group service TCP-88
description TCP Port 88
service-object tcp eq 88
object-group service TCP-445
description SMB
service-object tcp eq 445
object-group network John_-_Laptop
description John's Laptop
network-object 187.187.10.65 255.255.255.255
object-group network Graham_-_PC
description Graham Morrison's PC
network-object 187.187.10.90 255.255.255.255
object-group network john_test
network-object 187.187.40.7 255.255.255.255
object-group network Iain_PC
description Iain Macaulay IT
network-object 187.187.10.19 255.255.255.255
object-group network John_-_PC
description John MacPhail's PC
network-object 187.187.10.7 255.255.255.255
object-group network it-alahen-lap
network-object 187.187.10.230 255.255.255.255
object-group network Catriona_-_Laptop
description Catriona's Laptop
network-object 187.187.10.60 255.255.255.255
object-group network Graham_-_Laptop
network-object 187.186.10.120 255.255.255.255
object-group network it-innive-xp
description Innes MacIver's PC
network-object 187.187.10.14 255.255.255.255
object-group network it-alahen-xp
description Desktop
network-object 187.187.10.229 255.255.255.255
object-group network Cat_-_PC
description Catriona Macmillan's PC
network-object 187.187.10.4 255.255.255.255
object-group network it-davdon-xp
description Desktop
network-object 187.187.160.7 255.255.255.255
object-group network cat-laptop
description Catriona's Laptop addresses
network-object 187.187.77.81 255.255.255.255
network-object 187.187.77.82 255.255.255.255
object-group network Catriona_old_pc
network-object 187.187.10.44 255.255.255.255
object-group network cat-tablet
description Catriona's Tablet ip address's
network-object 187.187.77.78 255.255.255.254
object-group network DSO-SQLServer
description Task Database Server
network-object 187.187.1.33 255.255.255.255
object-group network it-finfernew-xp
description Findlay Ferguson PC
network-object 187.187.10.153 255.255.255.255
object-group network PC_Support
group-object John_-_Laptop
group-object Graham_-_PC
group-object john_test
group-object Iain_PC
group-object John_-_PC
group-object it-alahen-lap
group-object Catriona_-_Laptop
group-object Graham_-_Laptop
group-object it-alahen-xp
group-object Cat_-_PC
group-object it-davdon-xp
group-object cat-laptop
group-object Catriona_old_pc
group-object cat-tablet
group-object it-innive-xp
network-object 187.187.1.128 255.255.255.255
network-object 187.187.10.76 255.255.255.255
group-object DSO-SQLServer
network-object 187.187.15.234 255.255.255.255
network-object 187.187.4.60 255.255.255.255
network-object 187.187.10.134 255.255.255.255
network-object 172.18.194.22 255.255.255.255
group-object it-finfernew-xp
object-group network Entire_CNE
description Entire CNE range
network-object 187.0.0.0 255.0.0.0
object-group network NET-cnes_HHP-Sty-Staff
network-object 172.20.225.0 255.255.255.0
object-group network NET-cnes_HHP-Balivanich-staff
network-object 172.20.193.0 255.255.255.0
object-group network Alder-Intranet
network-object 192.168.168.13 255.255.255.255
object-group network Aspen-ISA
network-object 192.168.168.10 255.255.255.255
object-group service tcp-8080
description TCP Port 8080
service-object tcp eq 8080
object-group network Beech-External
network-object 217.36.32.210 255.255.255.255
object-group network it-csm
description cisco security manager
network-object 187.187.1.72 255.255.255.255
object-group network Juniper-External
description Internet Server
network-object 217.36.32.211 255.255.255.255
object-group network HHP_Server_Network
network-object 192.168.168.0 255.255.255.0
object-group network Messagelabs_Incoming_HHP
network-object 67.219.240.0 255.255.240.0
network-object 95.131.104.0 255.255.248.0
network-object 193.109.254.0 255.255.254.0
network-object 195.245.230.0 255.255.254.0
network-object 216.82.240.0 255.255.240.0
network-object 85.158.136.0 255.255.248.0
network-object 117.120.16.0 255.255.248.0
network-object 194.106.220.0 255.255.254.0
object-group network Angus-Maclean-PC
network-object 187.187.10.250 255.255.255.255
object-group service RDP
service-object tcp eq 3389
object-group network it-dbserver
description Database Server (Live)
network-object 187.187.1.65 255.255.255.255
object-group network it-sql-test
description Test SQL / database server
network-object 187.187.1.81 255.255.255.255
object-group service DNS-Resolving
description Domain Name Server
service-object tcp eq domain
service-object udp eq domain
object-group network Beech-Exchange
network-object 192.168.168.91 255.255.255.255
object-group network Messagelabs_-_Incoming
description List of MessageLab addresses that SMTP connections are accepted from
network-object 212.125.75.0 255.255.255.224
network-object 216.82.240.0 255.255.240.0
network-object 195.216.16.211 255.255.255.255
network-object 194.205.110.128 255.255.255.224
network-object 194.106.220.0 255.255.254.0
network-object 193.109.254.0 255.255.254.0
network-object 62.231.131.0 255.255.255.0
network-object 62.173.108.208 255.255.255.240
network-object 62.173.108.16 255.255.255.240
network-object 212.125.74.44 255.255.255.255
network-object 195.245.230.0 255.255.254.0
network-object 85.158.136.0 255.255.248.0
object-group network MIS_Support
network-object 192.168.168.250 255.255.255.254
object-group network it-donadon-xp
description Donald Macdonald's PC
network-object 187.187.10.13 255.255.255.255
object-group network Angela_PC
network-object 187.187.10.155 255.255.255.255
object-group network Katie_PC
network-object 187.187.10.151 255.255.255.255
object-group network Pauline_PC
network-object 187.187.10.12 255.255.255.255
object-group network it-paye-net
network-object 187.187.1.92 255.255.255.255
object-group network MessageLabs-Towers
description Message Labs IP Address ranges
network-object 216.82.240.0 255.255.240.0
network-object 67.219.240.0 255.255.240.0
network-object 85.158.136.0 255.255.248.0
network-object 95.131.104.0 255.255.248.0
network-object 117.120.16.0 255.255.248.0
network-object 193.109.254.0 255.255.254.0
network-object 194.106.220.0 255.255.254.0
network-object 195.245.230.0 255.255.254.0
network-object 62.231.131.0 255.255.255.0
network-object 212.125.75.16 255.255.255.240
object-group network NET_cnes-castlebay-staff
network-object 172.19.17.0 255.255.255.0
object-group network NET_cnes_tarbert_staff
description NET_cnes_tarbert_staff
network-object 172.19.33.0 255.255.255.0
object-group network Juniper
network-object 192.168.169.5 255.255.255.255
object-group network HHP_DMZ_Network
network-object 192.168.169.0 255.255.255.0
object-group network Ash
network-object 192.168.168.100 255.255.255.255
object-group service UDP-445
service-object udp eq 445
object-group service tcp-udp-135-139
service-object tcp-udp range 135 139
object-group network HHP-ELM
description HHP's ELM ActiveH server
network-object 187.187.1.203 255.255.255.255
object-group network CNES-Ext-GW
description CNES External Address
network-object 194.83.245.242 255.255.255.255
object-group service IPSEC
description IPSEC
service-object 57
service-object ah
service-object esp
service-object udp eq isakmp
object-group network Alamur-PC
network-object 187.187.10.15 255.255.255.255
object-group network Iain-Nicolson-PC
network-object 187.187.10.159 255.255.255.255
object-group network HHP_Remote_Access_Pool
network-object 192.168.168.200 255.255.255.248
network-object 192.168.168.208 255.255.255.240
network-object 192.168.168.224 255.255.255.252
network-object 192.168.168.228 255.255.255.254
object-group network Holly-AV
network-object 192.168.168.9 255.255.255.255
object-group service AVG_Ports
description For AVG server to HHP PCs
service-object tcp-udp eq 6150
service-object tcp-udp eq 6051
service-object tcp-udp eq 445
service-object tcp-udp eq 138
service-object tcp-udp eq 135
service-object tcp-udp eq 6054
service-object tcp-udp eq 4158
service-object tcp-udp eq 139
service-object tcp-udp eq 137
object-group network CNES_Access
network-object 192.168.168.230 255.255.255.254
network-object 192.168.168.232 255.255.255.248
network-object 192.168.168.240 255.255.255.248
network-object 192.168.168.248 255.255.255.254
object-group network HHP-068
description BACS PC
network-object 172.20.225.6 255.255.255.255
object-group network Banyan
network-object 192.168.168.105 255.255.255.255
object-group service TCP81
description TCP Port 81
service-object tcp eq 81
object-group network Gavin_-_new_PC
network-object 187.187.10.150 255.255.255.255
object-group network Secudoors
network-object 172.20.224.4 255.255.255.255
access-list outside_access_in remark Time sync to external ntp server
access-list outside_access_in extended permit udp host 192.108.114.23 object-group HHP_Domain_Controllers eq ntp
access-list outside_access_in extended permit tcp object-group MessageLabs-Towers object-group Beech-External eq smtp
access-list outside_access_in extended permit ip host 81.136.160.237 object-group HHP_Server_Network
access-list outside_access_in extended permit ip object-group CNES_Access object-group HHP_Server_Network
access-list outside_access_in extended permit ip object-group MIS_Support object-group HHP_Server_Network
access-list outside_access_in extended permit ip object-group HHP_Remote_Access_Pool object-group HHP_Server_Network
access-list outside_access_in extended permit tcp any object-group Juniper-External eq www
access-list outside_access_in extended permit tcp any object-group Juniper-External eq https
access-list outside_access_in extended deny ip any any
access-list outside_access_in_1 extended permit ip any any
access-list CSM_FW_ACL_Wireless_HHP extended permit ip object-group NET-cnes_HHP-Balivanich object-group HHP_Server_Network
access-list CSM_FW_ACL_Wireless_HHP extended permit ip object-group NET-cnes_HHP-Sty object-group HHP_Server_Network
access-list CSM_FW_ACL_Wireless_HHP extended permit tcp object-group HHP-068 any eq www
access-list CSM_FW_ACL_Wireless_HHP extended permit tcp object-group HHP-068 any eq domain
access-list CSM_FW_ACL_Wireless_HHP extended permit udp object-group HHP-068 any eq domain
access-list CSM_FW_ACL_Wireless_HHP extended permit tcp object-group HHP-068 any eq https
access-list CSM_FW_ACL_Wireless_HHP extended permit object-group DNS-Resolving object-group HHP-068 any
access-list CSM_FW_ACL_Wireless_HHP extended permit object-group tcp-8080 object-group HHP-068 any
access-list CSM_FW_ACL_Wireless_HHP extended permit ip host 172.20.193.53 object-group CNES-Ext-GW
access-list CSM_FW_ACL_Wireless_HHP extended permit ip object-group Secudoors any
access-list CSM_FW_ACL_inside extended permit ip object-group HHP_Server_Network object-group NET-cnes_HHP-Balivanich
access-list CSM_FW_ACL_inside extended permit ip object-group HHP_Server_Network object-group NET-cnes_HHP-Sty
access-list CSM_FW_ACL_inside extended permit ip object-group HHP_Application_Servers object-group PC_Support
access-list CSM_FW_ACL_inside extended permit ip object-group HHP_Domain_Controllers object-group PC_Support
access-list CSM_FW_ACL_inside extended permit ip object-group HHP_Terminal_Servers object-group PC_Support
access-list CSM_FW_ACL_inside extended permit tcp object-group Oak-DC1 any eq domain
access-list CSM_FW_ACL_inside extended permit udp object-group Oak-DC1 any eq domain
access-list CSM_FW_ACL_inside extended permit object-group DNS-Resolving object-group Oak-DC1 any
access-list CSM_FW_ACL_inside extended permit tcp object-group Maple-DC2 any eq domain
access-list CSM_FW_ACL_inside extended permit udp object-group Maple-DC2 any eq domain
access-list CSM_FW_ACL_inside extended permit object-group DNS-Resolving object-group Maple-DC2 any
access-list CSM_FW_ACL_inside extended permit tcp object-group Aspen-ISA any eq www
access-list CSM_FW_ACL_inside extended permit tcp object-group Aspen-ISA any eq domain
access-list CSM_FW_ACL_inside extended permit udp object-group Aspen-ISA any eq domain
access-list CSM_FW_ACL_inside extended permit tcp object-group Aspen-ISA any eq https
access-list CSM_FW_ACL_inside extended permit object-group DNS-Resolving object-group Aspen-ISA any
access-list CSM_FW_ACL_inside extended permit object-group tcp-8080 object-group Aspen-ISA any
access-list CSM_FW_ACL_inside remark For Symantec Liveupdates
access-list CSM_FW_ACL_inside extended permit tcp object-group Banyan any eq ftp
access-list CSM_FW_ACL_inside extended permit tcp object-group Banyan any eq www
access-list CSM_FW_ACL_inside extended permit tcp object-group Banyan any eq https
access-list CSM_FW_ACL_inside remark IPSec VPN access from ELm to CNES
access-list CSM_FW_ACL_inside extended permit object-group IPSEC object-group ELM-ActiveH object-group CNES-Ext-GW
access-list CSM_FW_ACL_inside extended permit udp object-group ELM-ActiveH object-group CNES-Ext-GW eq 4500
access-list CSM_FW_ACL_inside extended permit tcp object-group ELM-ActiveH object-group CNES-Ext-GW eq 4500
access-list CSM_FW_ACL_inside extended permit icmp object-group HHP_Server_Network object-group HHP_DMZ_Network
access-list CSM_FW_ACL_inside remark Time sync to external ntp server
access-list CSM_FW_ACL_inside extended permit udp object-group HHP_Domain_Controllers host 192.108.114.23 eq ntp
access-list CSM_FW_ACL_inside extended permit tcp object-group Beech-Exchange object-group Messagelabs_-_Incoming eq smtp
access-list CSM_FW_ACL_inside extended permit tcp object-group Aspen-ISA object-group Juniper eq www
access-list CSM_FW_ACL_inside extended permit tcp object-group Aspen-ISA object-group Juniper eq https
access-list CSM_FW_ACL_inside extended permit ip object-group Holly-AV object-group Juniper
access-list CSM_FW_ACL_inside extended deny ip any any
access-list CSM_FW_ACL_CNES extended permit ip object-group PC_Support object-group HHP_Server_Network
access-list CSM_FW_ACL_CNES extended permit ip object-group PC_Support object-group HHP_DMZ_Network
access-list CSM_FW_ACL_CNES extended permit ip object-group PC_Support object-group NET-cnes_HHP-Balivanich
access-list CSM_FW_ACL_CNES extended permit ip object-group PC_Support object-group NET-cnes_HHP-Sty
access-list CSM_FW_ACL_CNES extended permit tcp object-group it-csm any eq ssh
access-list CSM_FW_ACL_CNES extended permit tcp object-group it-csm any eq www
access-list CSM_FW_ACL_CNES extended permit tcp object-group it-csm any eq https
access-list CSM_FW_ACL_CNES remark Aim's access to Active H server: DSO SQL
access-list CSM_FW_ACL_CNES remark server's access (Task)
access-list CSM_FW_ACL_CNES remark IT Ops - mapped drive for FTP transfer to and from E450/Elm of Entitlement Adjustments
access-list CSM_FW_ACL_CNES remark and Tenancy Changes
access-list CSM_FW_ACL_CNES extended permit ip object-group it-sql-test object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit ip object-group DSO-SQLServer object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit ip object-group it-paye-net object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit ip object-group Angela_PC object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit ip object-group Katie_PC object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit ip object-group Pauline_PC object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES remark donald and Findlay RDP access to Active H
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group it-donadon-xp object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group it-donadon-xp object-group HHP_Terminal_Servers
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group it-finfernew-xp object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group it-finfernew-xp object-group HHP_Terminal_Servers
access-list CSM_FW_ACL_CNES extended permit ip object-group Angus-Maclean-PC object-group Alder-Intranet
access-list CSM_FW_ACL_CNES extended permit ip object-group Angus-Maclean-PC host 192.168.168.17
access-list CSM_FW_ACL_CNES extended permit ip object-group Angus-Maclean-PC object-group Juniper
access-list CSM_FW_ACL_CNES extended permit ip object-group Iain-Nicolson-PC object-group Alder-Intranet
access-list CSM_FW_ACL_CNES extended permit ip object-group Iain-Nicolson-PC host 192.168.168.17
access-list CSM_FW_ACL_CNES extended permit ip object-group Iain-Nicolson-PC object-group Juniper
access-list CSM_FW_ACL_CNES extended permit ip object-group it-davdon-xp object-group Alder-Intranet
access-list CSM_FW_ACL_CNES extended permit ip object-group it-davdon-xp host 192.168.168.17
access-list CSM_FW_ACL_CNES extended permit ip object-group it-davdon-xp object-group Juniper
access-list CSM_FW_ACL_CNES extended permit ip object-group Alamur-PC object-group Alder-Intranet
access-list CSM_FW_ACL_CNES extended permit ip object-group Alamur-PC host 192.168.168.17
access-list CSM_FW_ACL_CNES extended permit ip object-group Alamur-PC object-group Juniper
access-list CSM_FW_ACL_CNES extended permit ip object-group Gavin_-_new_PC object-group Alder-Intranet
access-list CSM_FW_ACL_CNES extended permit ip object-group Gavin_-_new_PC host 192.168.168.17
access-list CSM_FW_ACL_CNES extended permit ip object-group Gavin_-_new_PC object-group Juniper
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group NET_cnes-castlebay-staff object-group HHP_Server_Network
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group NET_cnes_tarbert_staff object-group HHP_Server_Network
access-list MIS_splitTunnelAcl standard permit 192.168.168.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip object-group HHP_Server_Network 192.168.168.250 255.255.255.254
access-list inside_nat0_outbound extended permit ip object-group HHP_Server_Network 192.168.168.224 255.255.255.224
access-list CSM_FW_ACL_DMZ extended permit ip object-group HHP_DMZ_Network object-group PC_Support
access-list CSM_FW_ACL_DMZ extended permit icmp object-group HHP_DMZ_Network object-group HHP_Server_Network
access-list CSM_FW_ACL_DMZ extended permit ip object-group Juniper object-group Angus-Maclean-PC
access-list CSM_FW_ACL_DMZ extended permit ip object-group Juniper object-group Holly-AV
access-list CSM_FW_ACL_DMZ extended permit tcp object-group Juniper object-group Beech-Exchange eq smtp
access-list CSM_FW_ACL_DMZ extended permit tcp object-group Juniper object-group HHP_Domain_Controllers eq domain
access-list CSM_FW_ACL_DMZ extended permit udp object-group Juniper object-group HHP_Domain_Controllers eq domain
access-list CSM_FW_ACL_DMZ remark for backups to USB drive on ASH
access-list CSM_FW_ACL_DMZ extended permit object-group TCP-445 object-group Juniper object-group Ash
access-list CSM_FW_ACL_DMZ extended permit object-group UDP-445 object-group Juniper object-group Ash
access-list CSM_FW_ACL_DMZ extended permit object-group tcp-udp-135-139 object-group Juniper object-group Ash
access-list CSM_FW_ACL_DMZ extended deny ip any any
access-list CNES_Support_splitTunnelAcl standard permit 192.168.168.0 255.255.255.0
access-list RemoteAccess_splitTunnelAcl standard permit 192.168.168.0 255.255.255.0
access-list outside_cryptomap extended permit ip object-group HHP_Server_Network object-group NET-cnes_HHP-Sty
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
mtu DMZ 1500
mtu Wireless_HHP 1500
mtu CNES 1500
ip local pool CNES_Access 192.168.168.230-192.168.168.249
ip local pool MIS_Support 192.168.168.250-192.168.168.251
ip local pool OLM-VPN-Pool 192.168.168.252
ip local pool HHP_Remote_Access_Pool 192.168.168.200-192.168.168.229
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat-control
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (Wireless_HHP) 1 172.20.193.53 255.255.255.255
nat (Wireless_HHP) 1 172.20.225.0 255.255.255.0
static (inside,CNES) 192.168.168.0 192.168.168.0 netmask 255.255.255.0
static (CNES,inside) 187.187.0.0 255.255.0.0 netmask 255.255.0.0
static (Wireless_HHP,inside) 172.20.224.0 172.20.224.0 netmask 255.255.240.0
static (inside,Wireless_HHP) 192.168.168.0 192.168.168.0 netmask 255.255.255.0
static (CNES,Wireless_HHP) 187.187.0.0 187.187.0.0 netmask 255.255.0.0
static (inside,outside) 217.36.32.210 192.168.168.91 netmask 255.255.255.255
static (DMZ,outside) 217.36.32.211 192.168.169.5 netmask 255.255.255.255
static (inside,DMZ) 192.168.168.0 192.168.168.0 netmask 255.255.255.0
static (CNES,DMZ) 187.0.0.0 187.0.0.0 netmask 255.0.0.0
access-group CSM_FW_ACL_inside in interface inside
access-group outside_access_in_1 in interface outside control-plane
access-group outside_access_in in interface outside
access-group CSM_FW_ACL_DMZ in interface DMZ
access-group CSM_FW_ACL_Wireless_HHP in interface Wireless_HHP
access-group CSM_FW_ACL_CNES in interface CNES
route outside 0.0.0.0 0.0.0.0 81.148.0.157 1
route Wireless_HHP 172.20.192.0 255.255.240.0 172.16.36.3 1
route Wireless_HHP 172.20.224.0 255.255.240.0 172.16.36.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server HHP protocol ldap
aaa-server HHP (inside) host 192.168.168.2
timeout 5
ldap-base-dn dc=hhp,dc=com
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *
ldap-login-dn cn=gramor,cn=users,dc=hhp,dc=com
server-type microsoft
aaa-server HHP_1 protocol ldap
aaa-server HHP_1 (inside) host 192.168.168.2
timeout 5
ldap-base-dn dc=hhp,dc=com
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *
ldap-login-dn cn=administrator,cn=users,dc=hhp,dc=com
server-type microsoft
aaa-server HHP_3 protocol ldap
aaa-server HHP_3 (inside) host 192.168.168.2
timeout 5
ldap-base-dn dc=hhp,dc=com
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *
ldap-login-dn cn=administrator,cn=users,dc=hhp,dc=com
server-type microsoft
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.168.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
http 194.83.245.242 255.255.255.255 outside
http 187.187.1.72 255.255.255.255 CNES
http 187.187.10.90 255.255.255.255 CNES
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map outside_map_dynamic 2 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set peer 81.136.160.237
crypto map outside_map 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 30001 ipsec-isakmp dynamic outside_map_dynamic
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment terminal
fqdn none
subject-name O=Hebridean Housing Partnership Limited,CN=secure-access.hebrideanhousing.co.uk,L=Isle of Lewis,ST=Scotland,C=GB
keypair SSL_Certificate
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment terminal
fqdn none
crl configure
crypto ca certificate chain ASDM_TrustPoint0
certificate 0100000000012790a5c005
30820530 30820418 a0030201 02020b01 00000000 012790a5 c005300d 06092a86
4886f70d 01010505 00306a31 23302106 0355040b 131a4f72 67616e69 7a617469
6f6e2056 616c6964 6174696f 6e204341 31133011 06035504 0a130a47 6c6f6261
6c536967 6e312e30 2c060355 04031325 476c6f62 616c5369 676e204f 7267616e
697a6174 696f6e20 56616c69 64617469 6f6e2043 41301e17 0d313030 33323431
34313835 385a170d 31333033 32343134 31383534 5a308197 310b3009 06035504
06130247 42311130 0f060355 04081308 53636f74 6c616e64 31163014 06035504
07130d49 736c6520 6f66204c 65776973 312e302c 06035504 0a132548 65627269
6465616e 20486f75 73696e67 20506172 746e6572 73686970 204c696d 69746564
312d302b 06035504 03132473 65637572 652d6163 63657373 2e686562 72696465
616e686f 7573696e 672e636f 2e756b30 82012230 0d06092a 864886f7 0d010101
05000382 010f0030 82010a02 82010100 def181d9 c34c58a8 9abcc849 7d8ad0a9
3c64c77f f3126c81 30911f41 5903a92c 81fb374b 2fe2680e 10b26dce 81ca0c23
af2c9f9a 52295e8c d2223fa6 7c4c386d 51c6fb16 a47688e6 e47e2410 b0283503
fd72abd3 e59d3b02 cd47706e babf948c 4e0282a3 5f789ff7 8041b2db ceac64eb
3e163b38 3a8ecc25 0c4802a8 d17fecd9 f1a36288 29202df4 b20ae891 f95ce055
6e670559 3d075024 7f3ac7ef 26218154 a7f6a399 34c43c4a 97c2c88c c4588ee4
77cc2ad8 b1bd868d d55c2b9b 727e9904 66d0fb52 c212abd7 a06f28f1 ad2aa04b
3d7b3094 c59c00d4 cf51fefb d8bfa101 8ba9c4ba 5cf629ff c50716d3 71019a98
8fa55b83 6b158b6d 1043f092 646ef07d 02030100 01a38201 a7308201 a3301f06
03551d23 04183016 80147d6d 2aec66ab a75136ab 0269f170 8fc4590b 9a1f3049
06082b06 01050507 0101043d 303b3039 06082b06 01050507 3002862d 68747470
3a2f2f73 65637572 652e676c 6f62616c 7369676e 2e6e6574 2f636163 6572742f
6f726776 312e6372 74303f06 03551d1f 04383036 3034a032 a030862e 68747470
3a2f2f63 726c2e67 6c6f6261 6c736967 6e2e6e65 742f4f72 67616e69 7a617469
6f6e5661 6c312e63 726c301d 0603551d 0e041604 14d398d5 ddf29355 15b04750
baccc6b3 0f97a6c9 94302f06 03551d11 04283026 82247365 63757265 2d616363
6573732e 68656272 69646561 6e686f75 73696e67 2e636f2e 756b3009 0603551d
13040230 00300e06 03551d0f 0101ff04 04030205 a0302906 03551d25 04223020
06082b06 01050507 03010608 2b060105 05070302 060a2b06 01040182 370a0303
304b0603 551d2004 44304230 4006092b 06010401 a0320114 30333031 06082b06
01050507 02011625 68747470 3a2f2f77 77772e67 6c6f6261 6c736967 6e2e6e65
742f7265 706f7369 746f7279 2f301106 09608648 0186f842 01010404 030206c0
300d0609 2a864886 f70d0101 05050003 82010100 8af3be01 c4830d83 9b347355
de7496ef bd76b86c ee92f32f 1157ef11 6ad949b6 611537ad 81f06408 73ec6fe2
6466675c cf31a80f bead422d ec574f95 55fe0b7a 97e271e7 0220c7b1 53376843
ff7f7280 f9bfdee6 3584e123 00c37d9f 5004b766 9469ead5 f002744c fd50271c
6bcdb54c e5db85aa 9760a330 d72464a2 bc8ecdff d80bbc27 7551e97c ee9b7078
9207f9d6 b969a47a 6df722b6 14ce803d 8d4bb9e9 4695e8e6 d453950e 06506594
ec7652ea 365cdf94 90e2f7ee 855dadb5 c0459d73 bb6d01a8 3c076718 7f80de40
c5eb9e0e 17c93087 fd5c5fc1 fd6401fe 7e5038b1 3da1d250 01ccd8be 964d5557
b320c4c1 0015d1b7 daad7527 930b0c90 7711704f
quit
crypto ca certificate chain ASDM_TrustPoint1
certificate ca 0400000000011e44a5f52a
30820467 3082034f a0030201 02020b04 00000000 011e44a5 f52a300d 06092a86
4886f70d 01010505 00305731 0b300906 03550406 13024245 31193017 06035504
0a131047 6c6f6261 6c536967 6e206e76 2d736131 10300e06 0355040b 1307526f
6f742043 41311b30 19060355 04031312 476c6f62 616c5369 676e2052 6f6f7420
4341301e 170d3037 30343131 31323030 30305a17 0d313730 34313131 32303030
305a306a 31233021 06035504 0b131a4f 7267616e 697a6174 696f6e20 56616c69
64617469 6f6e2043 41311330 11060355 040a130a 476c6f62 616c5369 676e312e
302c0603 55040313 25476c6f 62616c53 69676e20 4f726761 6e697a61 74696f6e
2056616c 69646174 696f6e20 43413082 0122300d 06092a86 4886f70d 01010105
00038201 0f003082 010a0282 010100a1 2fc4bcce 8703e967 c189c8e5 93fc7db4
ad9ef663 4e6ae89c 2c7389a2 01f48f21 f8fd259d 58166d86 f6ee4957 757e75ea
22117e3d fbc74241 dcfcc50c 9155807b eb64331d 9bf9ca38 e9abc625 43512540
f4e47e18 556aa98f 103a401e d65783ef 7f2f342f 2dd2f653 c2190db7 edc981f5
462cb423 425e9d13 0375ecea 6afc577c c936973b 98dc1313 ecec41fa 5d34eab9
93e71016 65cc9c92 fdf5c59d 3e4ab909 fce45f1e 695f4df4 567244b1 1d2303c8
36f66588 c8bf3916 458e1e26 6c5116c5 2a0038c5 a4136995 7dab013b a8c414b4
80daac1a 4420d5fe a9067b14 27afe030 21dd90f4 a9d52319 2e1e03e6 c1df9529
e4c19443 dd3e90aa cb4bc9be 8ad33902 03010001 a382011f 3082011b 300e0603
551d0f01 01ff0404 03020106 30120603 551d1301 01ff0408 30060101 ff020100
301d0603 551d0e04 1604147d 6d2aec66 aba75136 ab0269f1 708fc459 0b9a1f30
4b060355 1d200444 30423040 06092b06 010401a0 32011430 33303106 082b0601
05050702 01162568 7474703a 2f2f7777 772e676c 6f62616c 7369676e 2e6e6574
2f726570 6f736974 6f72792f 30330603 551d1f04 2c302a30 28a026a0 24862268
7474703a 2f2f6372 6c2e676c 6f62616c 7369676e 2e6e6574 2f726f6f 742e6372
6c301106 09608648 0186f842 01010404 03020204 30200603 551d2504 19301706
0a2b0601 04018237 0a030306 09608648 0186f842 0401301f 0603551d 23041830
16801460 7b661a45 0d97ca89 502f7d04 cd34a8ff fcfd4b30 0d06092a 864886f7
0d010105 05000382 01010079 47fc15d7 4c79df0f 7a9eced4 7c4b63c9 89b57b3f
9912e89c 8c9a492f e04e954a edc7bcbe f1a2db8e 931dba71 54aa4bd9 89222487
c504a8ac 8252a052 f8b8e14f a1276663 214a39e7 c7c54e5f b2d61d13 6d30e9ce
d7a21cbc 290a733c 5b2349fe d6ffcab0 4ff5f267 98c04711 f8b748a6 9009d642
beeab1b9 5342c39c 20c9fba1 5bb5566d 8781c860 acc4b972 270a8e1e a8b12ecd
32a27857 b09cf895 bb438e8c 31866e53 0dc61205 ba416ea8 35300918 1d0261ff
fdee35de 6ac33bd0 4d4b4e50 b256360c 445dda1a 652ae698 56a96333 2e04e7ae
e8f48eb7 b2da7dc0 c8e2aea6 282fe3c9 73bdfc07 4134b7aa 6eeea7db d1933ced
90ec3292 88d9c823 6c7421
quit
crypto isakmp identity hostname
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 187.187.1.41 255.255.255.255 inside
ssh 187.187.1.72 255.255.255.255 inside
ssh 187.187.77.81 255.255.255.255 inside
ssh 187.187.10.19 255.255.255.255 inside
ssh 187.187.10.229 255.255.255.255 inside
ssh 187.187.160.7 255.255.255.255 inside
ssh 187.187.1.41 255.255.255.255 outside
ssh 187.187.1.72 255.255.255.255 outside
ssh 187.187.77.81 255.255.255.255 outside
ssh 187.187.10.19 255.255.255.255 outside
ssh 187.187.10.229 255.255.255.255 outside
ssh 187.187.160.7 255.255.255.255 outside
ssh timeout 15
console timeout 0
vpdn group BT request dialout pppoe
vpdn group BT localname B*******.btclick.com
vpdn group BT ppp authentication chap
vpdn username B*******@hg39.btclick.com password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint0 outside
ssl trust-point ASDM_TrustPoint0 outside vpnlb-ip
webvpn
enable inside
enable outside
group-policy HHP_Remote_Access_1 internal
group-policy HHP_Remote_Access_1 attributes
wins-server value 192.168.168.2 192.168.168.2
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value CNES_Support_splitTunnelAcl
group-policy HHP_Remote_Access internal
group-policy HHP_Remote_Access attributes
wins-server value 192.168.168.2 192.168.168.2
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value CNES_Support_splitTunnelAcl
group-policy Omfax internal
group-policy Omfax attributes
wins-server value 192.168.168.2 192.168.168.3
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec webvpn
webvpn
svc ask none default webvpn
group-policy MIS_1 internal
group-policy MIS_1 attributes
wins-server value 192.168.168.2 192.168.168.3
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value MIS_splitTunnelAcl
default-domain value hhp.com
group-policy RemoteAccess internal
group-policy RemoteAccess attributes
wins-server value 192.168.168.2 192.168.168.3
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value RemoteAccess_splitTunnelAcl
group-policy CNES_Access internal
group-policy CNES_Access attributes
wins-server value 192.168.168.2 192.168.168.3
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value CNES_Support_splitTunnelAcl
group-policy HHP internal
group-policy HHP attributes
dhcp-network-scope none
vpn-access-hours none
vpn-idle-timeout none
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec webvpn
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
split-tunnel-policy tunnelall
split-tunnel-network-list none
split-dns none
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout none
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
client-firewall none
webvpn
url-list value Severs
filter none
homepage none
port-forward disable
http-proxy disable
sso-server none
svc dtls none
svc keep-installer none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression none
svc modules none
svc profiles none
svc ask none default webvpn
customization none
http-comp none
user-storage none
storage-key none
hidden-shares none
smart-tunnel disable
activex-relay disable
file-entry disable
file-browsing disable
url-entry disable
deny-message none
group-policy MIS internal
group-policy MIS attributes
wins-server value 192.168.168.2 192.168.168.3
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value MIS_splitTunnelAcl
username test password Kg/Rgy23do7gPGTv encrypted privilege 0
username test attributes
vpn-group-policy HHP_Remote_Access
username catneil password yOgiHCGobUNIkjcN encrypted privilege 0
username omfax password pvUaCLwilGmQVifd encrypted privilege 0
username backup password IHQbl.JAoESlM9Jv encrypted privilege 0
username misadmin password 8IZXmHa67HIJYHK1 encrypted
username misadmin attributes
service-type remote-access
username gramor password ne829U0rGFVEedhY encrypted privilege 15
username gramor attributes
vpn-group-policy HHP_Remote_Access
webvpn
url-list value Severs
username aim_user password 5OQaWCdB18qiHlOn encrypted privilege 0
username aim_user attributes
vpn-group-policy CNES_Support
username katask password 2WsX.HoqKXuiqkDk encrypted privilege 0
username katask attributes
vpn-group-policy CNES_Support
username janboyd password ZEUyykwzME6hII2i encrypted privilege 0
username marmor password C5n48AiRLXwxAeBQ encrypted privilege 0
username marste password amwTL584WdiT87Tb encrypted privilege 0
username helmah password RvU8c.3w0H3/MJz4 encrypted privilege 0
username anglea password wGlUJDBrmJI.uz./ encrypted privilege 0
username anglea attributes
vpn-group-policy CNES_Support
username fiobuc password 5Uispw90wqvDYerQ encrypted privilege 0
tunnel-group DefaultRAGroup general-attributes
authentication-server-group HHP_1
tunnel-group DefaultWEBVPNGroup general-attributes
authentication-server-group HHP_1
default-group-policy HHP
tunnel-group DefaultWEBVPNGroup webvpn-attributes
nbns-server 192.168.168.2 timeout 2 retry 2
nbns-server 192.168.168.3 timeout 2 retry 2
tunnel-group WebVPN type remote-access
tunnel-group WebVPN general-attributes
authentication-server-group HHP_3
default-group-policy HHP
username-from-certificate UID
tunnel-group CNES_Access -
Hi, I'm trying to create Site-to-Site VPN between Cisco ASA 5505 and Cisco Router 3945.
I've tried create configuration with and without ASA wizard, but anyway it doesn't work.
Please help me to find where is the issue.
I have two sites and would like to get access from 192.168.83.0 to 192.168.17.0
192.168.17.0 --- S1.S1.S1.S1 (IOS Router) ==================== S2.S2.S2.S2 (ASA 5505) --- 192.168.83.0
Here is my current configuration.
Thanks for your help.
IOS Configuration
version 15.2
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
crypto isakmp key cisco address 198.0.183.225
crypto isakmp invalid-spi-recovery
crypto ipsec transform-set AES-SET esp-aes esp-sha-hmac
mode transport
crypto map static-map 1 ipsec-isakmp
set peer S2.S2.S2.S2
set transform-set AES-SET
set pfs group2
match address 100
interface GigabitEthernet0/0
ip address S1.S1.S1.S1 255.255.255.240
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
crypto map static-map
interface GigabitEthernet0/1
ip address 192.168.17.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
access-list 100 permit ip 192.168.17.0 0.0.0.255 192.168.83.0 0.0.0.255
ASA Configuration
ASA Version 8.4(3)
interface Ethernet0/0
switchport access vlan 2
interface Vlan1
nameif inside
security-level 100
ip address 192.168.83.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address S2.S2.S2.S2 255.255.255.248
ftp mode passive
same-security-traffic permit intra-interface
object network inside-network
subnet 192.168.83.0 255.255.255.0
object network datacenter
host S1.S1.S1.S1
object network datacenter-network
subnet 192.168.17.0 255.255.255.0
object network NETWORK_OBJ_192.168.83.0_24
subnet 192.168.83.0 255.255.255.0
access-list outside_access_in extended permit icmp any any echo-reply
access-list outside_access_in extended deny ip any any log
access-list outside_cryptomap extended permit ip 192.168.83.0 255.255.255.0 object datacenter-network
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn_pool 192.168.83.200-192.168.83.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic inside-network interface
nat (inside,outside) source static inside-network inside-network destination static inside-network inside-network no-proxy-arp route-lookup
nat (inside,outside) source static inside-network inside-network destination static datacenter-network datacenter-network no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.83.0_24 NETWORK_OBJ_192.168.83.0_24 destination static datacenter-network pdatacenter-network no-proxy-arp route-lookup
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 DEFAULT_GATEWAY 1
crypto ipsec ikev1 transform-set vpn-transform-set esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set vpn-transform-set mode transport
crypto ipsec ikev1 transform-set L2L_SET esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set L2L_SET mode transport
crypto dynamic-map dyno 10 set ikev1 transform-set vpn-transform-set
crypto map vpn 1 match address outside_cryptomap
crypto map vpn 1 set pfs
crypto map vpn 1 set peer S1.S1.S1.S1
crypto map vpn 1 set ikev1 transform-set L2L_SET
crypto map vpn 20 ipsec-isakmp dynamic dyno
crypto map vpn interface outside
crypto isakmp nat-traversal 3600
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy GroupPolicy_S1.S1.S1.S1 internal
group-policy GroupPolicy_S1.S1.S1.S1 attributes
vpn-tunnel-protocol ikev1
group-policy remote_vpn_policy internal
group-policy remote_vpn_policy attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec
username artem password 8xs7XK3To4s5WfTvtKAutA== nt-encrypted
username admin password rqiFSVJFung3fvFZ encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool vpn_pool
default-group-policy remote_vpn_policy
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group S1.S1.S1.S1 type ipsec-l2l
tunnel-group S1.S1.S1.S1 general-attributes
default-group-policy GroupPolicy_S1.S1.S1.S1
tunnel-group S1.S1.S1.S1 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f55f10c19a0848edd2466d08744556eb
: endThanks for helping me again. I really appreciate.
I don't hve any NAT-exemptions in Cisco IOS Router. Transform-set I will change soon, but I've tried with tunnel mode and it didn't work.
Maybe NAT-exemptions is the issue. Can you advice me which exemptions should be in Cisco IOS Router?
Because on Cisco ASA I guess I have everything.
Here is show crypto session detail
router(config)#do show crypto session detail
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, T - cTCP encapsulation
X - IKE Extended Authentication, F - IKE Fragmentation
Interface: GigabitEthernet0/0
Session status: DOWN
Peer: 198.0.183.225 port 500 fvrf: (none) ivrf: (none)
Desc: (none)
Phase1_id: (none)
IPSEC FLOW: permit ip 192.168.17.0/255.255.255.0 192.168.83.0/255.255.255.0
Active SAs: 0, origin: crypto map
Inbound: #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
Should I see something in crypto isakmp sa?
pp-border#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id status
IPv6 Crypto ISAKMP SA
Thanks again for your help. -
Cisco 877W router and external ADSL modem
Cisco 877W router and external ADSL modem
In order to support ADSL2+ on a pre ADSL2+ router and in preparation for a later migration to BT infinity I am trying to configure the Router using an external adsl2+ modem appropriately.
The original configuration had 3 ports configured as one (internal lan) vlan and bridge group together with one wireless sub-interface, the remaining port configured a second vlan and bridge group with a second wireless sub- interface. The Dialer was a member of the second bridge group. This way the second wireless interface and associated bridge group provided a kind of DMZ for outbound access.
The configuration I am attempting is similar the lan ports remain the same, but port 0 as a member of the vlan and bridge group (now a pppoe client) associated with one of the wireless sub interfaces as per above. The ATM interface is downed. This nearly works except that if the wireless subinterface on this bridge group is configured the dialer no longer dials giving a 'no dialer string' error. If I do not configure that wireless sub interface all works well.
If anyone is interested to look I would appreciate any comments. I enclose a sanitised config in which you will note the 'commented out' wireless subnet interface (in red).
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname xxxxxxxxxxxxxxxxxxxxx
boot-start-marker
boot-end-marker
logging buffered 4096 warnings
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxx
aaa new-model
aaa group server radius sdm-vpn-server-group-2
aaa group server radius rad_eap
server 192.168.253.1 auth-port 1812 acct-port 1813
server 192.168.253.1 auth-port 1645 acct-port 1646
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_2 group sdm-vpn-server-group-2
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa authorization network sdm_vpn_group_ml_2 local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
clock timezone PCTime 0
clock summer-time PCTime date Mar 30 2003 1:00 Oct 26 2003 2:00
crypto pki trustpoint TP-self-signed-2834265337
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2834265337
revocation-check none
rsakeypair TP-self-signed-2834265337
crypto pki certificate chain TP-self-signed-2834265337
certificate self-signed 01 nvram:IOS-Self-Sig#2F.cer
dot11 syslog
dot11 ssid GuestAP
vlan 101
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7 113B162712001F4A2D2B25
dot11 ssid LanAP
vlan 100
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
mbssid guest-mode
no ip source-route
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 192.168.252.1 192.168.252.8
ip dhcp excluded-address 192.168.252.15 192.168.252.254
ip dhcp pool sdm-pool1
import all
network 192.168.252.0 255.255.255.0
domain-name XXX.Local
dns-server xxx.xxx.xxx.xxx
default-router 192.168.252.254
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
no ip domain lookup
ip domain name XXX.Local
ip name-server xxx.xxx.xxx.xxx
ip name-server xxx.xxx.xxx.xxx
ip reflexive-list timeout 120
vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
username administrator privilege 15 secret 5 £££££££££££££££££££££
class-map type inspect match-any IN_to_OUT_CLASS
match protocol tcp
match protocol udp
match protocol icmp
class-map type inspect match-any OUT_to_IN_CLASS
match protocol https
match protocol smtp extended
class-map type inspect match-any DMZ_to_IN_CLASS
match protocol http
match protocol https
match protocol smtp extended
policy-map type inspect DMZ_to_IN_POL
class type inspect DMZ_to_IN_CLASS
inspect
class class-default
drop log
policy-map type inspect IN_to_OUT_POL
class type inspect IN_to_OUT_CLASS
inspect
class class-default
drop log
policy-map type inspect OUT_to_IN_POL
class type inspect OUT_to_IN_CLASS
inspect
class class-default
drop log
zone security INSIDE
zone security OUTSIDE
zone security DMZ
zone-pair security OUT_TO_IN source OUTSIDE destination INSIDE
service-policy type inspect OUT_to_IN_POL
zone-pair security IN_TO_OUT source INSIDE destination OUTSIDE
service-policy type inspect IN_to_OUT_POL
zone-pair security DMZ_TO_OUT source DMZ destination OUTSIDE
service-policy type inspect IN_to_OUT_POL
zone-pair security DMZ_TO_IN source DMZ destination INSIDE
service-policy type inspect DMZ_to_IN_POL
bridge irb
interface Loopback0
no ip address
interface Null0
no ip unreachables
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
interface FastEthernet0
description Outside Interface (PPPoE)
interface FastEthernet1
description Inside Interface
switchport access vlan 10
interface FastEthernet2
description Inside Interface
switchport access vlan 10
spanning-tree portfast
interface FastEthernet3
description Inside Interface
switchport access vlan 10
spanning-tree portfast
interface Dot11Radio0
no ip address
no ip route-cache cef
no ip route-cache
encryption vlan 100 mode ciphers aes-ccm tkip
encryption vlan 101 mode ciphers aes-ccm tkip
ssid GuestAP
ssid LanAP
mbssid
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2437
station-role root
interface Dot11Radio0.100
description LanAP
encapsulation dot1Q 100
no ip route-cache
no cdp enable
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 spanning-disabled
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
!interface Dot11Radio0.101
! description GuestAP
! encapsulation dot1Q 101
! no ip route-cache
! no cdp enable
! bridge-group 1
! bridge-group 1 subscriber-loop-control
! bridge-group 1 spanning-disabled
! bridge-group 1 block-unknown-source
! no bridge-group 1 source-learning
! no bridge-group 1 unicast-flooding
interface Vlan1
description $ES_LAN$
no ip address
ip virtual-reassembly
pppoe enable group global
pppoe-client dial-pool-number 1
bridge-group 1
interface Vlan10
no ip address
ip virtual-reassembly
bridge-group 10
interface Dialer1
description $FW_OUTSIDE$
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip nat outside
ip virtual-reassembly
zone-member security OUTSIDE
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXXXX
ppp chap password 7 xxxxxxxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxxxxxxxxxxx password 7 xxxxxxxxxxxxxxxxxxxxx
ppp ipcp dns request
ppp ipcp wins request
hold-queue 224 in
interface Dialer0
no ip address
interface BVI10
description Inside Interface
ip address 192.168.253.254 255.255.255.0
ip access-group 101 in
ip helper-address 192.168.253.1
ip nat inside
ip virtual-reassembly
zone-member security INSIDE
interface BVI1
description DMZ Interface
ip address 192.168.252.254 255.255.255.0
ip nat inside
ip virtual-reassembly
zone-member security DMZ
ip local pool SDM_POOL_1 192.168.20.9 192.168.20.14
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list Inside_Clients_NAT interface Dialer1 overload
ip nat inside source static 192.168.253.10 xxx.xxx.xxx.xxx
ip access-list extended DMZ_to_IN_POL
remark SDM_ACL Category=128
permit ip any any
ip access-list extended Inside_Clients_NAT
remark SDM_ACL Category=2
permit ip 192.168.253.0 0.0.0.255 any
logging 192.168.253.10
access-list 1 remark Auto generated by SDM Management Access feature
access-list 1 remark SDM_ACL Category=1
access-list 1 permit 192.168.253.0 0.0.0.255
access-list 100 remark VTY Access-class list
access-list 100 remark SDM_ACL Category=1
access-list 100 permit ip 192.168.253.0 0.0.0.255 any
access-list 100 deny ip any any
access-list 101 remark Auto generated by SDM Management Access feature
access-list 101 remark SDM_ACL Category=1
access-list 101 remark Auto generated by SDM for NTP (123) xxx.xxx.xxx.xxx
access-list 101 permit udp host xxx.xxx.xxx.xxx eq ntp host 192.168.253.254 eq ntp
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq telnet
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq 22
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq www
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq 443
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq cmd
access-list 101 deny tcp any host 192.168.253.254 eq telnet
access-list 101 deny tcp any host 192.168.253.254 eq 22
access-list 101 deny tcp any host 192.168.253.254 eq www
access-list 101 deny tcp any host 192.168.253.254 eq 443
access-list 101 deny tcp any host 192.168.253.254 eq cmd
access-list 101 deny udp any host 192.168.253.254 eq snmp
access-list 101 permit ip any any
access-list 199 permit ip any host 10.1.1.1
dialer-list 1 protocol ip permit
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server host 192.168.253.1 auth-port 1812 acct-port 1813 key 7 XXXXXXXXXXXXXXXXXX
radius-server host 192.168.253.1 auth-port 1645 acct-port 1646 key 7 XXXXXXXXXXXXXXXXXX
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
bridge 10 protocol ieee
bridge 10 route ip
banner login C Border Router
line con 0
no modem enable
transport output telnet
line aux 0
transport output telnet
line vty 0 4
access-class 100 in
privilege level 15
length 0
transport input telnet ssh
scheduler max-task-time 5000
scheduler interval 500
ntp server xxx.xxx.xxx.xxx source Dialer0 prefer
ntp server xxx.xxx.xxx.xxx source Dialer0 prefer
sntp server xxx.xxx.xxx.xxx
endHi Jody,
Apologies delay in replying. I have done the following:
Made two of the FE ports vlan1,BVI1 (for LAN traffic)
Left one port as VLAN10 as the pppoe client conected to the externalmodem
Made the last port VLAN10 as well and gave it an IP addess as for a DMZ client.
I have DHCP configured to serve the DMZ addresses.
This all works for LAN clients and also works for a client attachedto that physical DMZ port.
When I added a dot11radio sub interface into VLAN 10 the wireless client did not get an IP lease. Everything else continued to work.
I had never thought about this before, but if a dot11radio interface is on the same vlan (but not being part ofa bridge group) why are DHCP broadcasts not propogating to all the vlan members as I would have expected. I recognise that this isa limit in my understanding.
If I then made VLAN10 a member of a new Bridge Group, I lost WAN connectivity as per original posting.
I cannot add another VLAN due to the 2 vlan limit in this image.
Finally regarding your comment about giving it what it wants, what exactly did you have in mind. The dialer already has a dial string parameters configured.
Think I am about to give upon this.
Regards, -
Hello all,
I recently added POE series RJ45 blade to one of my 4506's in order to power some new Cisco WAP's. The modules are functioning nominally with exception to not getting inline power to any devices. Here's the skinny:
Here’s a snapshot of the inline power issue:
CORE-WH-4506#sh power detail
Power Fan Inline
Supply Model No Type Status Sensor Status
PS1 PWR-C45-1400AC AC 1400W good good n.a.
PS2 PWR-C45-1400AC AC 1400W good good n.a.
Power supplies needed by system : 1
Power supplies currently available : 2
Power Summary Maximum
(in Watts) Used Available
System Power (12V) 710 1360
Inline Power (-50V) 0 0
Backplane Power (3.3V) 0 40
Total 710 1400
Watts Used of System Power(12V)
Mod Model budgeted instantaneous peak out of reset in rese t
1 WS-X45-SUP6-E 260 -- -- 260 260
2 WS-X4448-GB-RJ45 120 -- -- 120 72
3 WS-X4648-RJ45V+E 92 -- -- 92 10
4 WS-X4448-GB-SFP 65 -- -- 65 50
5 WS-X4248-FE-SFP 53 -- -- 53 20
-- Fan Tray 120 -- -- -- --
Total 710 -- -- 590 412
Watts used of Chassis Inline Power (-50V)
Inline Power Admin Inline Power Oper
Mod Model PS Device PS Device Efficiency
1 WS-X45-SUP6-E - - - - -
2 WS-X4448-GB-RJ45 - - - - -
3 WS-X4648-RJ45V+E - - - - -
4 WS-X4448-GB-SFP - - - - -
5 WS-X4248-FE-SFP - - - - -
Total 0 0 0 0
Here’s a kick-out from trying to force the interface inline power:
*Dec 9 07:23:36.519: %ILPOWER-5-ILPOWER_POWER_DENY: Interface Gi3/47: inline power denied. Reason: Insufficient inline power, requested(32258) available(0).
What am I missing?Yes. Makes sense. You need to upgrade your 1400w Power Supply to something bigger. Here's the math:
Total 710 -- -- 590 412
You've got a 4506 chassis and populated six out of seven slots. With six slot loaded, the line cards pull up to 710w from your Power Supply. Now if you look at the Data Sheet for the WS-X4648-RJ45V+E line card it states that this particular line card can support up to 48 ports running 15.4w (or 24 ports at 30w PoE). The product of 30w & 24 ports is 720. So if you add up 720 and 710 you get a sum of 1430 which is OVER your 1400w Power Supply. This is the reason why the line card is complaining.
It doesn't matter if you've got a WS-X4648-RJ45V+E line card and you're going to, for example, plug 10 APs. When the line card is loaded into the chassis, the line card will immediately "chop" or "slice" 720w off the power supply. This is how it works.
Maybe you are looking for
-
Report help for multiple Date Select options
Hi Friends, For a particular year wise report, the client wants 12 date select-options which are changeable and informal every year .The report will also be displayed as per the given date selection period wise. Please help me how to fetch the datas
-
I recently downloaded "Inequalirt For All," a movie by Robert Reich. I loaded $20 onto my iTunes account and there was a special where I could rent the movie for $0.99. I rented the movie but have not been able to download and play it. The error m
-
I tried to delete an audio recording from my iphone ipod and pressed edit and got a message saying configur ipod I did this and now I am locked into only one topic and recording. Now after a couple of hours I cannot get into my ipod at all. Can any
-
Cannot Install - Installer cannot find file
A colleague and I are getting the same error when trying to install this software. The installer extracts files into the temp directory, then an error pops up saying "The system cannot find the files pecified." I can see that it is trying to find "hp
-
Loans Mgt: per maturity different GL account needed
Hello What is the technical solution (customizing) for the following requirement? For loans with a term / maturity < 1 year (field in the master data of the CML loan) the GL account for the asset/liability (depending on loan given/taken) is 1111 "Sho