Point 2 Multipoint Video

Hi,
I have CUCM 6.0.1 running with IP Phones 7985G. Point-to-Point video calls are working fine. But when i add another video phone to the call all the phones start displaying their self videos.
Does anyone know how to configure Video Phones so that i can have Point-to-Multipoint Video calls as well as video confernces.
Thanks

I have already configured software conference bridge on CUCM and audio conferencing is working fine even on video phones.
What my concern is that videos are not being conferenced, i.e. on point-to-point call both person can see each other at the phone display. but when i conference it on 3 or more person everyone see their own video NOT other party's.
Any help.

Similar Messages

How to play share point library video in custom web part

Hi ,i want to play my share point library videos and computer videos in custom web part , how can i do this ,playing static video and library video both are common.
Thanks,
Madhu.

Do you want to create a player from scratch or use eg. the Silverlight media player:
http://jomit.blogspot.de/2009/12/using-silverlight-media-player-of.html
or alternatively html5 and the <video> element (will probably require a couple of tweaks in the master page) ?
Kind Regards
Bjoern
http://spviking.com
Twitter: Follow @bjoern_rapp

Is it possible to set IN/OUT points for video effects within a single clip in PE4?

Hello,
In PE4, Is it possible to use keyframes to simply turn certain video effects on/off at different points within a single clip ?
Some effects (i.e. Invert)have a Blend With Original setting which makes this easy to achieve, but others (i.e. Ripple)do not.
I understand how to use keyframes to adjust effect properties at different points within a clip, I just can't find a way to simply 'turn-off' or bypass an effect for a period of time.
Thanks All, CB

Chris,
As Steve points out, most Effects are OFF, by default (usually setting their parameters to 0). I just add a Keyframe for that Effect, with those properties, where you want the Effect to be OFF (but check that each Effect that you use starts as OFF, just to be sure). Then, in between the OFF settings, I add Keyframes with the desired parameters to invoke that particular Effect.
One can also use the Razor/Sissors to cut the Clip into segments (just do not move them) to keep the Keyframes in one area of the original Clip. I usually work on the entire Clip, as once the Keyframe is set to OFF for that Effect, no more Keyframes are needed.
Some Effects also have a Bypass setting, that can be Keyframed (in P Pro, and assume in PE). This can be handy to fully turn OFF any Effect. Note: even in P Pro, not all Effects have a Bypass setting.
As usual with PE (and P-Pro and PS), there can be a couple of ways to accomplish the same thing. One can choose the method that suits them best.
Good luck,
Hunt

Jumping to Specific URL from a cue point in video

Hello,
I am having a video play within flash CS3 and it does fine.
Now, I need to tell Flash that when it reaches cue point "end", it
should go to a specific web page. How can this be accomplished? I
am new to Actionscript 3.0 and after trying different things, I
don't seem to be able to accomplish this.
Thanks all.

Why yes indeed, just move the mouse to where you want to start playing on the timeline. Now press on the Spacebar and Voila, it starts playing from that point forward. Stop, just hit spacebar again. It's like play/pause button on a cd player or vcr.

Pure Digital Point & Shoot videos Not Displaying in iMovie

Just imported some clips from the 60 minute Pure Digital "Point & Shoot" into iMovie on a brand new iMac. The videos play the sound, but give a white screen on the video.
The clips will play from the Point & Shoot software, but not in iMovie.
I downloaded DivX, as I thought that might be the issue, but no go.
Any suggestions?

Hi Scott:
Welcome to discussions!
the files that that camera uses are not really MPEG4. So, they need to be converted.
ffmpeg can convert them (needs 2 passes) to real MP4 files that will import to Quick Time or iMovie if you have a G4 or better Mac. The website is below:
http://www.ffmpegx.com/index.html
Sue

Old Pointer, Bad Video PlayBack, and "Optimizing volume "Mac HD"

Hi i have a ibook g3 clamshell indigo "Paris" Edition.
The Black Mac Mouse Pointer is the one from like OS 9 and OS X 10.1 its not the new one.
Also It works great with typing applications painting using the internet and listening to music in itunes 7. but when i go to youtube or try to watch any video it skips.
Also why when updating in panther it says "Optimizing volume "Mac HD"
Note: i have just erase and installed Panther.
Specifications
Mac OS X Panther 10.3.9
Power PC G3 367 MHz
320 MB SDRAM
L2 Cache (per CPU) 256 kb
Bus Speed: 67 MHz
8 MB ATI Rage 128 Mobility AGP 2x
800 x 600 Display
USB 1.1
FireWire 400
YOYO Power Adapter
24x CD Drive
RJ-11 Modem
RJ-45 Ethernet
AirPort Card
Note: this is not my main computer it is a backup computer to check email or to have fun and sometimes a guest computer. My main computer its the MacBook listed below.

Unfortunately, the flash-based Youtube movies ask too much of the iBook hardware.
My workaround:
Save Youtube movies with a little help from keepvid.com
http://keepvid.com/
in mp4 format.
The freeware video player VLC
http://www.videolan.org/vlc/download-macosx.html
(OSX 10.3.9 at least for the current version), is able to play these files even on a 300MHZ Blueberry or Tangerine iBook in its original resolution. The option to skip frames should be activated.
If you own a 366MHZ or 466MHZ Clamshell with 8MB graphics try Youtube on OS9.
With the Mozilla-based OS9 Wamcom browser
http://wamcom.org/latest-131/
and the appropriate Flash Player plug-in
http://kb.adobe.com/selfservice/viewContent.do?externalId=d9c2fe33
(you have to place it manually in the wamcom plug-in directory) you are able to play them directly - the design and performance is still not perfect.

Seek to a point in video?

I'm trying to figure out a way to use jQuery to seek to a point in an HTML5 video. This tutorial actually gives an example of how to do it using JavaScript, but I'm not sure if it will work in Edge Animate or not. It's not really jQuery, is it? Has anyone tried to do this in Animate yet?

Page not found error on your link...
ladobeugm wrote:
This tutorial actually gives an example of how to do it using JavaScript, but I'm not sure if it will work in Edge Animate or not. It's not really jQuery, is it?
Sure - Animate entirely supports Javascript, and jQuery is just a (highly useful) Javascript library.
I suspect the example you saw is just using the currentTime property with the play method. If you can control it with Javascript, it can do so when issued from Animate.
hth,
Joe

Dual Layer break point - multiple videos

I have 4 videos to go one the DVD, comes to 8.5 GB in total.
1. 45mins
2. 1hr 15mins
3. 40 mins
4. 35 mins
How do I know which video to put the break point on and at what time.
I've been using trial and error for the last couple of days now and error keeps winning.
All I keep getting are various Error messages, this is my most recent
+Formatting was not successful. Layer 1 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.+
Thanks in advance
John E
Message was edited by: John England

It could be that you have exceeded the disc size, but assuming you haven't there has to be a break point where it crosses over from Layer 0 to Layer 1, if you have no Chapter Markers at all (or a limited number of Markers, none of which fall near the point which is a bit more than half the size of the assets you will get an error that a Layer is the wrong size.
What you do is
1.) Set up markers in the areas where your would guesstimate the Layer Break(s) should be. (You can build the project and use VTS view to see where about halfway plus a bit is located and make sure to put a few markers in the track in that VTS. Take a look [here|http://dvdstepbystep.com/vts.php] for looking at VTS and builds to see a bit more on that.)
2.) Build the project (but not format)
3.) Format a Disc (in the dialog that comes up, click on advanced tab, then where it says break point, use the pulldown which will have all valid breakpoint markers dark/black, while non-valid Layer Break Markers will be faded) If no marker is black there is no marker in the right place, regardless of you use automatic or not.
4.) If the layer break(s) are not where you would like them (in other words a place where they may be more noticable) use VTS view to re-order then go back to step 1.
If you have not made audio AC3, you should encode to AC3.

Captivate 8 Edit mouse points for video demo not available??

Hello,
I've been trying to fig out how to enable mouse point editing for a video demo in Captivate 8. I know in previous versions it was simply edit >>> mouse points and even documentation I've read states its the same for captivate 8 but when I go to the edit menu I don't' have an option for edit mouse points. this is in both Mac and PC version. I did find the options adding a mouse to the recording but that doesn't help with editing the actual mouse in the video.
Any help would be greatly appreciated.
Thanks

After a little more experimentation I see that this feature is only available in a .cpvc not a .cptx. with a video in it.

How do I edit out the mouse pointer from Video Demos?

I have recorded a few short video demos and would like to leave the mouse pointer in so it can be seen, but on occasions I need to edit it out, is there a way to do this?

AVI setting for importing Canon point/shoot video

I have a Canon Powershot SX110 that i use as a quick use backup. The video files are AVI (see below properties). I'm not sure if I'm importing incorrectly or have wrong presets, but the file seems very jerky in the preview window, even more so than HD vidoe.
Is there a setting i'm missing?
many thanks.
Type: AVI Movie
File Size: 519.2 MB
Image Size: 640 x 480
Pixel Depth: 0
Frame Rate: 30.00
Source Audio Format: 11024 Hz - 8 bit - Mono
Project Audio Format: 11025 Hz - 32 bit floating point - Mono
Total Duration: 00:04:50:12
Average Data Rate: 1.8 MB / second
Pixel Aspect Ratio: 1.0

My system is way UNDER powered.
Its a single core P4 with 3GB Ram
I also tried converting to the 44.1 kHz with 16 bit stereo but no luck.
It could just be a computer problem.
I get mixed results when playing HDV but my SD plays great.
Were in the process of moving but once were done a new Core i7 has my name on it.
Im sure allot of my problems will go away once i get more power.
I will try the same files once I get a new system just for a test.
Just as a test I unlinked the audio and deleted it and the video still would not play.
Thanks for the tip on Zoombrowser. I didnt even think of it for doing a convert.
Enjoy: Glenn

Scrubber snaps back to specific points in video. Why?

I'm downloading & watching videos on iTunes U from the University of Tennessee. When I try to rewind (either by touching the rewind button or dragging the scrubber on the iPhone), I'm unable to obtain the exact position I want.
Instead, the video snaps back to specific positions in the timeline. For example, trying to move to the 3:00 mark in the video always jumps back to the start. The video also likes to stop at 3:19 and 4:44, but I can't move to positions BETWEEN these specific time points.
Are there "key frames" or something similar at play here? Can I get around this? Thanks!

It's weird. The phone (and its video playing functionality) is working great on all the files except these specific ones from iTunes U.

Best Practice for Security Point-Multipoint 802.11a Bridge Connection

I am trying to get the best practice for securing a point to multi-point wireless bridge link. Link point A to B, C, & D; and B, C, & D back to A. What authenication is the best and configuration is best that is included in the Aironet 1410 IOS. Thanks for your assistance.
Greg

The following document on the types of authentication available on 1400 should help you
http://www.cisco.com/univercd/cc/td/doc/product/wireless/aero1400/br1410/brscg/p11auth.htm

Movies Can't Go Onto iPod....... Then What's The Point Of VIDEO IPOD

I've tried everything to get movies on my iPod. I bought $30 QT PRO because I was told that that has the only format that can import movies on the iPod. After I bought it I tried to use it but I get an error -43 messege. Next I was told to then download videora so I did and when I converted it into an iPod file but I couldn't find out how to get it into iTunes. Now I am being told videora doesn't work. PLEASE TELL ME HOW TO GET MOVIES ON MY IPOD OR HOW TO GET MY MOVIE TO SHOW UP ON ITUNES.

It really isn't that difficult to import your own movies or DVD's. Follow the online tutorial for useful help at the Videora website. There is a conversion guide also available to lend some further help. As far as importing your movies into the ipod, just click on file, then 'add file to library', select the file that you want to import. Also important, make sure in your preferences you the video updating set on.
-Chris

After upgrading to v11.1.4 error: The procedure entry point ?video ... could not be located in the dynamic lybrary link webkit.dll. Please advise

After upgrading to v11.1.4 I get the error when attempting to open iTunes:
The procedure entry point ?videoTracks@QTMovie@@QBE?AV?$Vector@V?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VC rashOnOverflow@2@@***@XZ could not be located in the dynamic link library C:Program Files (x86)Common FilesAppleApple Application SupportWebKit.dll.
Please advise. I uninstalled and re-installed all Apple products numerous times now - so this is not the solution.

Try the following user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

Point 2 Multipoint Video

Similar Messages

Maybe you are looking for