Point Light and Glow not working

I have ran into a strange issue recently. For some reason, certain built in features aren't working for my CS6 AE. When I try and use a point light or the glow effect nothing happens. No matter how much I tweak the settings it nothing happens. Has anyone else heard of a problem like this before? I recently upgrade to a new graphics card (K5000, all drivers up to date), is there a setting that maybe changed that causes these effects to no longer work? Any help is appreciated.
*Slight update... It only seems to happen when I have a comp with 3D layers or a comp with 2D layers and only text on them.

Ray Tracing will not see effects applied to 3D layers. There's a warning, which may be disabled, that tells you the limitations. Make sure none of these conditions exist. Check the fast previews option in the Comp pannel and make sure that's set properly. Make sure you don't have draft 3D turned on.

Similar Messages

  • My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.   My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexp

    My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
    My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
    I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
    Thanks in advance.

    I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
    My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
    Airport Express is model A1143
    And I have tried to connect with iPhone - same same.

  • Contribution points display and search not working in Safari 5?

    Hi all,
    Are the contribution points display and SDN search not working for everyone else in Safari 5 or is it just me?
    Chrome 5 and Firefox 3.6 (all on Mac OS X 10.6) seem to be working fine.
    Thanks,
    Ethan

    The thread titles are no longer hyperlinked in the contributions overview and the quote chevron does not work either since yesterday.
    Who was the beta tester and where are their test scripts?
    A simple thread with a little bit of everything in it and a windiff against the before & after would detect these things?
    Cheers,
    Julius

  • The status light and controls not working on my dock station connected to my hifi ?

    The light and controls are not working on my apple dock station connected to my hifi,can anyone help?

    gerom18 wrote:
    Hello,
    I have an issue with my light sensor. It won´t reduce the bright in a dark room and also it won´t increase under the sun. I´ve installed an application called BlackBerry Virtual Expert in order to test the behaviour of the sensors but when i want to try them, i have the following messages:
    Proximity sesnor not supported on this phone
    Light sensor not supported on this phone.
    I am running a 10.2 leak but i have the issue since 10.1.
    Can you help me?
    Thanks !
    I would suggest that you downgrade to 10.1 and go back where you bought it and have it check, it does sounds like it is a hardware issue.
    BTW VirtualExpert might not be able to access the sensor if you are using 10.2, since the program was made for the official OS which is 10.1
    Using the Playbook and the Z10 and the Z30 and loving them
    Martin

  • My shuffle will play for awhile , then blink red lights and then not work?!

    hey
    so...my ipod shuffle is werid.
    I didn't use it for awhile because I couldn't find it ( my fault ;p)
    then when I found it , I charged it and it would work fine, then all of a sudden it would blink red on and off really quickly then not work at all! Then I charged it again and it would work fine. That's not normal..is it?
    Help please

    try restoring it on your computer before using it again

  • HT1222 My mouse pointer in finder is not working by double clicking on the application.I have to double click and select open for opening the application.Can you suggest me some settings to fix this problem?

    My mouse pointer in finder is not working by double clicking on the application.I have to double click and select open for opening the application.Can you suggest me some settings to fix this problem?

    Hi,
    Try this ... reboot your Mac and see if double clicking works again.
    Also, you can just select the Application you like to open and hold down the Command+O to open.
    Also, did you check your setting for the mouse in system preferences.
    Dimaxum

  • My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    Hello Nadersalah,
    It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • My "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys arnt either? any help would be amazing!

    my "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys aren't either? any help would be amazing!  I use these keys a million times a hour and since I have switched to cc I cant get them to work. track selection makes no difference or if there are markers on the timeline or not. 
    Anyone else feel me on this?
    any help?

    Well that still didn't make any kind of difference.  I would just do without it but I've becomes really use to it with Avid for so long.  I have to admit there are a lot of small moments like this that makes me miss Avid.  Any other suggestions? I have checked the keyboard shortcuts a few times and maybe I'm just missing something here...

  • My ipod screen does not light, I can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made it the restoration of production and did not work.

    My ipod screen does not light, you can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made him the restoration of production and did not work.
    Please I need to know what do I have to do.
    Regards

    If you can't enter the passcode then you have to place the iPod in recovery mode and then restore the iPod via iTunes. For ecovery mode see:
    iPhone and iPod touch: Unable to update or restore
    Note that this requires using the sleep/wake button.  If you are not successful then there is nothing else that I know you can do.

  • I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?

    I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?

    Ambient light sensors are not always perfect in their function. To test, go into darkened room, with screen OFF, Locked, tap Home button. Look at screen it should be normal for use in darkened room, turn on bright lights, the screen should brighten to help compensate. If your iPhone does not do this, then Restore iPhone with current iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.

  • My new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???

    my new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???

    Try an SMC Reset. (System Management Controller)
    Shutdown>unplug from power for ten minutes>press and hold in the power button for ten seconds>startup again.
    Also try a PRAM Reset. (Parameter RAM)
    Shutdown. At the bootup chime, hold down CMD-Option-P-R together, wait for two more chimes, total three, then let go of all keys to finish booting,
    If this doesn't do it, run the Hardware Test in Extended
    http://support.apple.com/kb/ht1509

  • Photoshop CC Lighting Filter is not working

    Lighting Filter is not working.  When you run the filter the circular ring/point does not appear to adjust the light.  It is totally missing. You can adjust the settings but the filter never runs.  After attempting to run the filter I tried to go back to my workspace.  It would not reset to the default Essential workspace.  The other workspaces were OK.  I closed and reopened the application and my workspace was restored.  I tried running my GPU settings in advanced normal and basic.  None of the settings worked.  Please advise if I am missing something.

    The filter is now working.  It looks like you must close and reopen the application after changing your settings for the filter to work. 

  • HP Laserjet 1320 attention light on, printer not working.

    I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs.  Turned printer on and off.  Attention light remains on and printer not working.

    Hi Robert8695,
    Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
    http://goo.gl/u3Snr
    Let me know what happens and if the other problems persist as well.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Wireless keyboard and trackpad not working.

    iMac keyboard and trackpad not working after a couple days of not using. Hit power button on them and the light will blink, but will not function. Any help?

    Have you tried a fresh set of Alkaline batteries?
    Have you tried cleaning the battery contacts in them?

  • PowerMac 5.1 drag and drop not working, any suggestions?

    Powers Mid 2010 5.1 running 10.10.3, drag and drop not working smoothly, won't engage to drag. Any suggestions?

    Thanks for the return, well, just trying to relocate a web screen or move a saved application from the desktop into a folder. I use Final Cut Pro Ten extensively and sometimes I want to drag something off my desktop into the time line on the FCPX. When I left click and hold on the item to drag it doesn't seem to engage then when it does move it quits along the way to the drop point. I hope that makes since too you? I use a Logitech two button with a scroll wheel wired mouse and have twin 32" monitors. Thanks Latranner

Maybe you are looking for