Point PSE10 to two plug in folders?

I have installed two sets of plug ins into their default locations (highly recommended by the manufacturers.) Currently they are in different folders so in order to get PSE10 to "see" them I have it "pointed" at the metafolder which holds both of them. That means it takes PSE10 an extra 30 seconds to load (I can live with that) but it also says it can't load a couple of things.....so it won't finish loading until I clikc OK to all three error messages. It isn't the end of the world, but I don't see a way to tell PSE10 to look at 2 different folders for plugins....am I missing something? TIA

Here's a cool trick you can use: in your Plug-Ins folder, simply create a shortcut to the location where the plug-ins are - Elements should see it and add the Plug-ins.
Hope that helps!
Graffi

Similar Messages

I'm unable to bookmark a page in the folde I want. Only two of my folders is hown. HOW DO i SEE THEM ALL?

I have never found Firefox's bookmarking very intuitive- only frustrating. I am unable to bookmark a page into the folder I want because only two of my folders are shown and they aren't the one's I want. How do I get all my folders shown when I hit bookmark this page? I have followed the instructions to no avail.

I have never found Firefox's bookmarking very intuitive- only frustrating. I am unable to bookmark a page into the folder I want because only two of my folders are shown and they aren't the one's I want. How do I get all my folders shown when I hit bookmark this page? I have followed the instructions to no avail.

Keeping two iTunes Media Folders (and libraries) in sync

Hi all,
Here's my situation... I can't be the only person looking for an answer to this. (Can I?)
At home I have a Mac Mini with my music collection on it managed by iTunes. I have the same at work. I also have Chronosync set up to nightly syncronize my iTunes Media folders. Obviously, this is just step one.
What I'd ultimately like is to be able to change files or add media at either location (through iTunes) and not only have the files moved by Chronosync but also have the iTunes libraries updated. Is there a way to do this via AppleScript or some other solution? I looking to keep two iTunes Media folders mirrored and have iTunes' library be updated at the same time (or on a regular basis).
Thanks in advance!
A

It sounds like a question for whoever wrote Chronosync. I have never heard of it and have no idea what it is or what it does. Generally you ask questions related to third party software on the software's own support forum. What you need it to do is synchronize the whole iTunes folder, not just media files. The library.itl file contains most of the actual playlist and content data but things also get updated in the artwork folder, and some other files (mostly also in the iTunes folder).
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
Apple's solution is to have you buy all your music from Apple and use the automatically download new purchases set on both computers. Of course it isn't a complete solution. For example, if you change the rating on one computer it won't change it on the other since all you're doing is downloading a file from a third place (the store) to both other places (computers).

Is one out bound plug pointing to many inbound plugs ?

Hai Experts,
                          i hav the doubt one outbound plug is pointing to many inbound plugs in different view is it possible.
                         in web dynpro ABAP.
                          plz help.

Hi,
Yes it is possible to have one outbound plug for multiple inbound plug
depends on the condition you mention.
For example
If you enter range between 10 to 20 you may fire VIEW1 or
if you enter range between 20 to 100 you may fire VIEW2.
When creating navigation link you can set one outbound plug to multiple inbound plugs.
Regards and Best wishes.

A point to point communication between two EJB

How do we make a point to point communication between two ejb? Must i use mdb or session bean?
Because i have a problem: how can i send a message to a specific EJB that i choose?
Thanks

Yes....U should post a message from EJB1 to a queue and listener can be the second EJB (Better if its an MDB).
Whats the problem U r facing?
-Rais

Album download relabels itself and splits itself into two separate album folders

I have purchased and downloaded an album from a reputable and legal independent website that I have successfully used in the past, but the album folder seems to have a glitch.
When I download the album it labels itself "Standard" instead of by the name of the album title, like it usually does. Then when I add it to my iTunes library, it relabels itself to the album name and subsequently splits itself into two separate album folders. 9 random tracks located in one folder, 13 in the other. The only difference between the labels of the two album folders is that one has an underscore at the end of it. I have exhausted all my trouble shooting tricks like ensuring all the common metadata is the same (artist, album, sorting, grouping, genre, playlist etc) and deleting and re-downloading, and subsequently copying and pasting files into the correct place but the same thing keeps happening.
I have downloaded all the latest software updates on my iMac 10.10.1 and use OS X Yosemite. I have tried clearing my cache, cookies and webpage history and then downloading again using a completely different browser without success. I've even tried dragging and dropping files from one folder into the other, again without success. I would be grateful for any expert advice.

It's a bug that has been there for years.
There are workarounds, but you have to do them every time an album gets split. And that will happen every time you change an artist name or an album name (whether it's to change it to proper capitalization, or other reasons). There is no permanent solution.
Workaround #1:
1. Select all the tracks from the album
2. Right click and select "Get Info"
3. Change the album name by deleting, let's say, the last letter and press "OK"
4. Change the album name back.
Workaround #2:
1. Select all the tracks from the album
2. Right click and select "Get Info"
3. Change the artist name by deleting, let's say, the last letter and press "OK"
4. Change the artist name back.
Workaround #3:
1. Select all the tracks from the album
2. Right click and select "Get Info"
3. Go to "Options"
4. Check (or uncheck, if it's already check) the "Part of a compilation" box and press "OK"
P.S. Some smart person moved this thread from the "iTunes U" forum to the "iTunes for Mac" forum. But the OP clearly said he runs iTunes on Windows.

Headset with microphone two plugs?

So I bought a headset off amazon and when i got it, I realized that there were two plugs, one for listening and the other one for the microphone. I notice there is only one plug on my macbook pro and that is for listening. Is there anything I can do to use both plugs in order for me to use the microphone?

There's a much better option: buy an inexpensive USB soundcard with input and output ports. Here's one example; there are lots of others:
http://www.google.com/products/catalog?q=usb+sound+card+mac&oe=UTF-8&hl=en&clien t=safari&um=1&ie=UTF-8&tbm=shop&cid=15768150964133423558&sa=X&ei=AzSuT5WpMIfqgQf -87DRCQ&ved=0CJEBEPICMAA

When i use the AE2 as an extra wifi point and put the plug in from Time Capsule than the total networks goes down. what do I wrong?

When i use the AE2 as an extra wifi point and put the plug in from Time Capsule than the total networks goes down. what do I wrong?

When i use the AE2 as an extra wifi point and put the plug in from Time Capsule than the total networks goes down. what do I wrong?
You likely first configured the AirPort Express to "extend a wireless network" using wireless only, correct?
If yes, you cannot then connect the AirPort Express using Ethernet....that will crash your network.
The Express must be configured to "create a wireless network". AirPort Utility will do this for you automatically, but you will first need to perform a Factory Default Reset or Hard Reset on the AirPort Express and then start over with the configuration again.
Connect the Ethernet cable to the Express before you open AirPort Utility. Post back if you need more tips on how to set this up.

Plug In Folders in Adobe Exchange Packager

Hello,
I want to create a ZXP for easy install for customers.
I'm building Photoshop and After Effects Plug In's.
How can I configure Exchange Packager to target a sub folder in AE / Photoshop Plug In folder (Create it if it doesn't exist) and be compatible with the user OS and choice of installation folder?
I can see there are key folders for brushes, actions etc...
Is there $PlugIN ?
Thank You.

Hi Royi A,
Please see here for the full list of path tokens which can be used, e.g. $plugin:
Path tokens
Certain tokens will be treated differently on Windows and Mac, e.g. if the destination folder is found somewhere different on those two platforms - but it is not currently possible in Exchange Packager to specify a token which will only be used on one platform. This is a feature which we are looking to make available in the online version of Exchange Packager very soon.
Until then, if you need this level of granularity with your installation paths, you should build your own MXI file by following the documentation here:
http://helpx.adobe.com/extension-manager/kb/configuration-file-reference.html
...and package your ZXP using the "MXI based" option in Exchange Packager, or using the Packaging and Signing Toolkit:
http://www.adobe.com/devnet/creativesuite/sdk/eula_cs6-signing-toolkit.html
CC Extensions Signing Toolkit now available for Extension Builder 3 on Labs « Adobe Labs
Best regards,
Fraser

How can I combine two "My ITunes Folders"

I have been reading the discussion forums for weeks but have not found a solution to my problem and was hoping someone might be able to help. Here is my situation.
Background:
I have a large collection of CD’s that I wanted to import into itunes. Looking at the prospect of importing approx 4,000 cd’s I decided to “divide and conquer”. My wife took half and I took half and we each proceeded to import the cd’s onto our respective PC’s. Unfortunately when he “met in the middle” we didn’t realize it and we each proceeded to import cd’s that the other had already done (i.e. when comparing our music folders there are some duplicates).
Problem:
The real question I am trying to get answered is how I can combine the two separate itunes music folders into one. I would like to combine the two folders and then have one itunes music folder that I can import into itunes.
Any Suggestions? We used iTunes to organize the folders so they use the same “artist, album, song” hierarchy.

Try this -> syncOtunes

How do I determine what folder my library is attached to if I have two iTunes music folders on my computer?

I am trying to backup my music to an external backup disc. The problem is that I have two iTunes folders on my computer. So I need to determine which is the correct folder to backup. Please help.

Run iTunes, select any track, and Get Info on it (File menu). On the Summary page it will show you the path to the file which will tell you the correct folder. This of course presumes that your iTunes library isn't split between two folders, which is entirely possible, so you may wish to check more than a single track.
Regards.

How can I combine two iTunes media folders without losing media?

I have two media folders. One on an external drive that I used on an old PC before migrating to a new one, and my internal HDD on the new PC. My internal drive became nearly full so I had to start using my external drive and iTunes media folder again. So, right now iTunes looks to my internal drive for most of the media and my external drive for some of it. Now, I need to move all the media files back to the external drive and, hopefully, in one place. The primary challenge is that I don't know how to move the media files (and metadata) efficiently. I just don't know which folders have been affected and so a standard copy -> paste won't work because the PC will try to overwrite the folders and I have no idea which ones can be overwritten and which can't. Ugh...does this make sense? Thank you!!!

Hi there theskyisblue,
You can indeed switch between two different iTunes libraries, and this article outlines how:
iTunes: How to open an alternate iTunes Library file or create a new one
If iTunes is running, quit iTunes.
If you're using Windows, hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes.
If you're using a Mac, open iTunes and immediately hold down the Option key.
You should see one of these screens:
Thank you for using Apple Support Communities.
All the best,
Sterling

Back and forth with two finger in folders does not work

It is sad, that back and forth with two fingers does not work in Itunes, Folders, or somewere else than in Safari. You can put the settings back thwo three fingers but than you cannnot mark text with three fingers. It would be nice just to use two finger everywher to go back an forth

Would be nice positive posts too ..

Why do we have two DI API folders in SAP setup?

HI All,
within SAP folder, we have SAP business one \ DI API and SAP Business One DI API folders? whts the need for two? when the content is the same?
regards,
Binita

Hi Binita,
DI API could be used as a standalone compent, it can works with B1 application installed.
So you can install it by two ways.
A. Install B1 application (DI API is automatically installed)
B. Install only DI API (in another folder)
Generally, you don't need to install 2 instance of DI API, but in case first you install B, then you install A. There may be two DI API.
So if you install A, and then B, and then uninstall B, A will also work.
That is why there are two folders:)
Two instance of DI API wouldn't harm since only the latter could work.
BTW, if you compile your addon using DI API 2005, it will work on DI API 2007 (just the same as on new patch), SDK provides backward compatibility.
Regards,
Jay.

I accidentally locked my desktop folders , unable to open them Ho two unlock the folders

I accidentally locked my desktop folders , unable to open them Ho two unlock the folders

You have done something which change the permissions and your user is not able to access anymore. You can play around and try to correct permissions manually by going to your home folder, right click on the Desktop folder and choose get info and when new window will be open, at the bottom of it, check if your username is listed and if has Read & Write permissions.
Other option is to boot to recovery mode (after starting up your computer press and hold CMD+R), then from top panel click on Utilities and choose Terminal. Once terminal is open, type in it resetpassword and when new window will be open, select Macintosh HD as your system drive, select your password and click on the RESET button which is next to "Reset home folder permissions and ACL". NOTE: do not reset your password, you don't have to.
Second options would be better in case if permissions on other folders been changed too.

Point PSE10 to two plug in folders?

Similar Messages

Maybe you are looking for