Point to point IP telephony help neede

hi all,
im new to VOIP,i have 2 offices 10 km diff, i would like to implement ip telephones for communication between these 2 offices.my equipments are 2801 routers 2 no's and WIC-1T 2 no's point to point 128kbps leased line.maximum 10 users will use ip phone's in this scenario. what all things are required extra other than IP phones.
how can i configure these 2 routers for this scenario.whats the encapsulation for this configuration.pls give me the sample configuration also.
any post will be appreciated with proper rating.
Kind regds
Binoy.

128kbps leased line is not a lot of bandwidth if you do a lot of intersite calling. You can use g729 as the codec, which will give you upto 24kbps * 5 (5 calls).
Are you running Callmanager or Callmanager express ? Cheapest solution would be to run two independent callmanager express systems on each router. If running CME, you will need,
a. CME feature license (preferably get the 2800 CME bundle which comes with DSPs and feature licenses)
b. IP Phone licenses for CCME
c. A inline powered switch or power bricks, power injector or power patch panel
d. You will need to setup some form of CAC (preferably a gatekeeper) to ensure that your calls between offices doesnt go beyond 3 or 4.
e. If you do a lot of interoffice calling, you should resort to routing calls via PSTN, if you dont have the budget to increase the bandwidth between the two sites.
IF using Callmanager, you can put the server in one site and the other site may run SRST or CME. IN this case you will need,
a. Callmanager server and software
b. Phones licenses for Callmanager
c. SRST bundle (2800) for remote site
d. Voice gateway bundle (2800) for main site
e. inline powered switch.
For voicemail I think the best solution in this case will be to use CUE.
HTH
Sankar
PS: please remember to rate posts!

Similar Messages

I can no longer see my pictures.....the screen is white boxes but when I click on the box an exclamation point pops up. Please Help!!!!

I can no longer see my pictures.....the screen is white boxes but when I click on the box an exclamation point pops up. Please Help!!!!

The exclamation point occurs when iPhoto breaks/loses the file path to the original file. So try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot AND
the option to rebuild the small thumbnails.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Aironet 1310 simple point to point help

We will be using two 1310s simply as a long lan cable between a single computer and a single mobile data collection instrument. We know others have been successful. No security needed, max throughput is important. Is there a tech note somewhere that explains this minimal setup?
Any help would much appreciated.

Hi Julian,
Perhaps this doc will help get you started;
Wireless Bridges Point-to-Point Link Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml
Hope this helps!
Rob
Please remember to rate helpful posts.....

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description:          Dell Wireless 1397 WLAN Mini-Card
IP Address:          192.168.0.118
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Tue Apr 17 16:59:28 2012
Lease Expires:          Wed Apr 18 16:59:28 2012
DNS Servers:          192.168.20.254
                    192.168.30.217
Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description:          Broadcom NetLink (TM) Gigabit Ethernet
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?

had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?

You might want to check this thread https://discussions.apple.com/thread/3374367 hope this helps

I can not delete some power point files in the trash.help?

I can not delete some power point files in the trash.help?

Hi Gary,
The presentations were created originally with PowerPoint. I have been using them on both KeyNote and PowerPoint with no problem, even after updating to MountainLion. Problems started at the 10.8.3 upgrade. The installation was an upgrade form Lion. Yes I mean Open Office, I am able to open the presentation with Open Office and play it with no problems.
The presentation gets loaded by Power Point and the Power Point freezes. Key Note can not even load it. Stops 3/4 of the way. This happens with ALL my presentations.
I want to thank you for your help.
Leonardo

HT2736 Hi I don't have a 'gift' Icon on the 'resulting screen' as per point 3 above. Any help?

Hi I don't have a 'gift' Icon on the 'resulting screen' as per point 3 above. Any help?

It is a paid-for app that you are trying to gift ? You can't gift free items.
I've just tried it on my phone, running iOS 7.0.4, and I get the gift option - what iOS version do you have ?

Design Help with MPLS/BGP and Point to Point VPNs using OSPF as backup

I need some advice on the configuration I want to implement. Basically we have a MPLS cloud using BGP. We are using OSPF for internal routing. Everything is working fine. Now we want to add a Point to Point VPN using new Cisco ASA's for a backup path at all of our remote locations. We want it to be on standby. I want to use OSPF for this. Miami and LA are datacenters. I want the VPN's to go into both datacenters if possible running OSPF for backups. I have a feeling this will be very tricky. I also wanted to use floating routes. Now I know I get the VPN's up and running using OSPF with no problem. Here are my questions:
But being that I am using different areas, will OSPF through the VPN work correctly? I have the Cisco PDF on setting this up but it looks like they are using the same, AREA0, in the example.
Can I get both VPN's to work with no problems? Or will it be too much of a pain?
What would you guys suggest?
Thanks.

We are implementing the same solution, and was only able to make this work using HSRP one router for the MPLS connection and one for the VPN tunnel. I opened a TAC case and the tech couldn't get it to work either. I was able to establish the Lan-2-lan tunnel but triggering the route update was the problem. We ended up pulling our ASA5505's out and putting in 1841 routers.

For performance point, in data loading what we need to do?

Hi,
1.for performance point, in data loading what we need to do?
2.How to increase Cube performance & query Performance?
Thanks,
Basava Raju

Hi,
In addition to the above steps, especially for data loading, make sure that if you have custom code, its enhanced for performance both on the R3 side and the BI side as well.
For generic data sources, try to make them generic deltas or try pseudo deltas for them.
From a query pespective, in filters, try putting include conditions wheree ver possible instead of exclusions.
Cheers,
Kedar

HT4623 i turned my ipod off while it was udating the software (oops) now all it shows on the screen is a picture of the cord with an arrow pointing up to itunes. please help.

i turned my ipod off while it was udating the software (oops) now all it shows on the screen is a picture of the cord with an arrow pointing up to itunes. please help.

What happens when your connect the iOS device to your computer and restore via iTunes.
Try DFU mode and then restore if necessary.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

HELP NEEDED!! (please) CS6

HELP NEEDED! I have been working for 3 days in a "new doc". Of course i have saved several times (control+s)
but i do not remember it asking me about file name or folder. Today my comp crashed and i do not find the file. Just found 2 files (a tmp and one with no extension)
: one with 174 mg and another one with almost 2 gb. Is there any possibility to recover my work? Photoshop did not oppened a thing when i restarted comp
Thanks in advance

The TMP file is your Scratch Disk file, and cannot be "recovered" to an Image file.
Your second file might be almost anything. Though designed more for video files, both G-Spot and MediaInfo (both free file info utilities), CAN read several Still Image file types, and might help point out what that file (the one with no extension) really is. OTOH, as it could be almost anything, it could be that there is no header info in the file, for either to read.
Good luck,
Hunt
PS - Before I did much additional work, I would investigate WHY your computer shut down. If you are on a PC, I would go into Event Viewer, at the time of the shutdown, and see if you can track down any warning, or error messages, in both the System and Applications Tabs. I am pretty sure that a Mac has similar, but have not a clue where, or even what it would be called.

Urgent help needed(java frames)

Hi,
I need urgent help for correcting a piece of code.
I have written a piece of code for building a gui with some buttons, drawing some geometric shapes.The code consists of two files called Graph and Frame.
The problem I suppose in the last part of the Graph file, which Rectangle and Circle are called together, the only shape that the program draws is rectangle.Here is the code:
//Graph
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import java.io.*;
import java.util.*;
public class Graph extends JPanel {
LinkedList color;
LinkedList figures;
public Graph() {
setBackground(Color.white);
figures = new LinkedList();
color = new LinkedList();
int z;
class Point {
int x;
int y;
public Point(int x, int y) {
this.x = x;
this.y = y;
public Point(Point p) {
x = p.x;
y = p.y;
public String toString() {
return "(" + x + ", " + y + ")";
public void move(Point dist) {
x += dist.x;
y += dist.y;
abstract class GeomFigur {
public abstract void move(Point p);
class Line extends GeomFigur {
Point p1, p2;
public Line(Point p1, Point p2) {
this.p1 = new Point(p1);
this.p2 = new Point(p2);
public String toString() { return "Line from " + p1 + " to " + p2; }
public void move(Point dist) {
p1.move(dist);
p2.move(dist);
class Rectangle extends Line {
public Rectangle(Point p1, Point p2) {
super(p1, p2);
public String toString() { return "Rectangle from " + p1 + " to " + p2; }
class Circle extends GeomFigur{
Point centre;
int radius;
public Circle(Point centre, int radius) {
this.centre = new Point(centre);
this.radius = radius;
public String toString() {
return "Circle, centre " + centre + ", radius " + radius;
public void move(Point dist) { centre.move(dist); }
public void addRectangle(int x, int y, Color col) {
Rectangle r =new Rectangle(new Point(x,y),new Point(x+20,y+20));
figures.addLast(r);
color.addLast(col);
repaint();
public void addCircle(int x, int y, Color col) {
Circle c =new Circle(new Point(x,y), 1 );
figures.addLast(c);
color.addLast(col);
repaint();
public void paintComponent(Graphics g) {
super.paintComponent(g);
for (int i=0;i < figures.size();i++) {
Rectangle rect = (Rectangle)figures.get(i);
//Circle circ = (Circle)figures.get(i);
g.setColor(Color.black);
g.drawRect(rect.p1.x,rect.p1.y,20,20);
g.setColor((Color)color.get(i));
g.fillRect(rect.p1.x,rect.p1.y,20,20);
//g.setColor(Color.black);
// g.drawOval(circ.centre.x,circ.centre.y,20,20);
// g.setColor((Color)color.get(i));
// g.fillOval(circ.centre.x, circ.centre.y, 20, 20);
//Frame
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
public class Frame extends JFrame implements ActionListener {
JButton button1, button2, button3, button4, button5 ;
Graph gr;
JComboBox cbx;
JComboBox cby;
JComboBox col;
JMenu filemenu;
JMenuItem quit;
JMenuBar menubar;
int x=10;
int y=10;
Color color=Color.red;
public Frame() {
menubar = new JMenuBar();
filemenu = new JMenu("File");
filemenu.setMnemonic('F');
quit = new JMenuItem("Quit");
quit.addActionListener(this);
quit.setMnemonic('Q');
quit.setAccelerator(KeyStroke.getKeyStroke('Q',Event.CTRL_MASK,false));
filemenu.add(quit);
menubar.add(filemenu);
setJMenuBar(menubar);
button1 = new JButton("Rectangle");
button1.addActionListener(this);
button2 = new JButton("Circle");
button2.addActionListener(this);
button4 = new JButton("Ellipse");
button4.addActionListener(this);
button5 = new JButton("Triangle");
button5.addActionListener(this);
button3 = new JButton("Reset");
button3.addActionListener(this);
String[] elements_x= {"10","20","30","40","50","60","70"};
cbx = new JComboBox(elements_x);
cbx.addActionListener(this);
cbx.setActionCommand("cbx");
String[] elements_y= {"10","20","30","40","50","60","70"};
cby = new JComboBox(elements_y);
cby.addActionListener(this);
cby.setActionCommand("cby");
String[] elements_color = {"Red","Blue","Green","Orange","Yellow" };
col = new JComboBox(elements_color);
col.addActionListener(this);
col.setActionCommand("col");
gr = new Graph();
JPanel top = new JPanel(new BorderLayout());
JPanel inputs = new JPanel(new GridLayout(6,1));
inputs.add(button1);
inputs.add(button2);
inputs.add(button3);
inputs.add(button4);
inputs.add(button5);
inputs.add(cbx);
inputs.add(cby);
inputs.add(col);
top.add(gr,BorderLayout.CENTER);
top.add(inputs,BorderLayout.WEST);
getContentPane().add(BorderLayout.CENTER, top);
setSize(500,300);//set window size
//take care of actions
public void actionPerformed(ActionEvent e) {
String command = e.getActionCommand();
if (command.equals("Quit")){
System.exit(0);//terminate program
else if (command.equals("Rectangle")){
//add Rectangle to graph at
//position x,y and with certain color
gr.addRectangle(x,y,color);
else if (command.equals("Circle")){
gr.addCircle(x,y,color);
else if (command.equals("Reset")){
else if (command.equals("Triangle")){
else if (command.equals("Ellipse")){
else if (command.equals("cbx")){
x=Integer.valueOf((String)((JComboBox)e.getSource()).getSelectedItem()).intValue();
else if (command.equals("cby")){
y=Integer.valueOf((String)((JComboBox)e.getSource()).getSelectedItem()).intValue();
else if (command.equals("col")){
String temp=(String)((JComboBox)e.getSource()).getSelectedItem();
if (temp=="Red") color=Color.red;
else if (temp=="Blue") color=Color.blue;
else if (temp=="Green") color=Color.green;
else if (temp=="pink") color=Color.pink;
else if (temp=="lightGray") color=Color.lightGray;
//main program
public static void main(String [] args) {
Frame appl = new Frame();
appl.setVisible(true);
Thanks in advance
Marina

Hi,
You are very lucky that I'm currently boored. You should never tag a question as urgent. It might be urgent to you, but not to us who answer. And you should also use code formatting when you post code (see the formatting tips, or use the code-button).
I made some changes to your Graph class. The most important thing is the abstract draw method that I added to the GeomFigur class.
import java.awt.*;
import javax.swing.*;
import java.util.*;
public class Graph extends JPanel {
    LinkedList figures;
    public Graph() {
        setBackground(Color.white);
        figures = new LinkedList();
    int z;
    abstract class GeomFigur {
        protected Color color;
        public GeomFigur(Color color) {
            this.color = color;
        public abstract void move(Point p);
        public abstract void draw(Graphics g);
    abstract class Line extends GeomFigur {
        Point p1, p2;
        public Line(Color c, Point p1, Point p2) {
            super(c);
            this.p1 = new Point(p1);
            this.p2 = new Point(p2);
        public String toString() {
            return "Line from " + p1 + " to " + p2;
        public void move(Point dist) {
            p1.move(dist.x, dist.y);
            p2.move(dist.x, dist.y);
    class Rectangle extends Line {
        public Rectangle(Color c, Point p1, Point p2) {
            super(c, p1, p2);
        public String toString() {
            return "Rectangle from " + p1 + " to " + p2;
        public void draw(Graphics g) {
            System.out.println("Draw rectangle at " + p1 + " with color " + color);
            g.setColor(Color.black);
            g.drawRect(p1.x, p1.y, 20, 20);
            g.setColor(color);
            g.fillRect(p1.x, p1.y, 20, 20);
    class Circle extends GeomFigur {
        Point centre;
        int radius;
        public Circle(Color c, Point centre, int radius) {
            super(c);
            this.centre = new Point(centre);
            this.radius = radius;
        public String toString() {
            return "Circle, centre " + centre + ", radius " + radius;
        public void move(Point dist) {
            centre.move(dist.x, dist.y);
        public void draw(Graphics g) {
            System.out.println("Draw circle at " + centre + " with color " + color);
            g.setColor(Color.black);
            g.drawOval(centre.x, centre.y, 20, 20);
            g.setColor(color);
            g.fillOval(centre.x, centre.y, 20, 20);
    public void addRectangle(int x, int y, Color col) {
        System.out.println("x,y,col " + x + ":" + y + ":" + col);
        Rectangle r = new Rectangle(col, new Point(x, y), new Point(x + 20, y + 20));
        figures.addLast(r);
        repaint();
    public void addCircle(int x, int y, Color col) {
        System.out.println("x,y,col" + x + ":" + y + ":" + col);
        Circle c = new Circle(col, new Point(x, y), 1);
        figures.addLast(c);
        repaint();
    public void paintComponent(Graphics g) {
        super.paintComponent(g);
        for (int i = 0; i < figures.size(); i++) {
            GeomFigur drawable = (GeomFigur)figures.get(i);
            drawable.draw(g);
}/Kaj

Help needed to run JSTL 1.1 in Tomcat 6.0.16

Hi All,Help needed to run JSTL 1.1 in Tomcat 6.0.16. I am trying to run the example given in http://tomcat.apache.org/tomcat-6.0-doc/jndi-datasource-examples-howto.html The example tries to connect to MySQL database from JSP using JSTL and JNDI Datasource.I am running the example using Eclipse 3.4.2 using Sysdeo plugin to start and stop Tomcat server from Eclipse IDE.
My web.xml file has <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
</web-app>
and test.jsp has proper taglib directives
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
I have placed the jstl.jar and standard.jarof the jakarta-taglibs-standard-1.1.2.zip under E:\Deepa\workspace\DBTest\WebContent\WEB-INF\lib directory also placedcontext.xml file under E:\Deepa\workspace\DBTest\WebContent\META-INF and the content of context.xml is as below
<Context path="/DBTest" docBase="DBTest"
debug="5" reloadable="true" crossContext="true">
<Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource"
maxActive="100" maxIdle="30" maxWait="10000"
username="deepa" password="mysql" driverClassName="com.mysql.jdbc.Driver"
url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>
</Context>
Now while running the example, Eclipse creates one DBTest.xml file under C:\Program Files\Apache Software Foundation\Tomcat 6.0\conf\Catalina\localhost
which has the following line:
<Context path="/DBTest" reloadable="true" docBase="E:\Deepa\workspace\DBTest" workDir="E:\Deepa\workspace\DBTest\work" />
I am getting the following error when running http://localhost/DBTest/WebContent/test.jsp
in Browser:
<HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/sql cannot be resolved in either web.xml or the jar files deployed with this application
org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:51)
org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:409)
org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:116)
org.apache.jasper.compiler.TagLibraryInfoImpl.generateTLDLocation(TagLibraryInfoImpl.java:315)
org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:148)
org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:431)
org.apache.jasper.compiler.Parser.parseDirective(Parser.java:494)
org.apache.jasper.compiler.Parser.parseElements(Parser.java:1444)
org.apache.jasper.compiler.Parser.parse(Parser.java:138)
org.apache.jasper.compiler.ParserController.doParse(ParserController.java:216)
org.apache.jasper.compiler.ParserController.parse(ParserController.java:103)
org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:154)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:315)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:295)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:282)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:586)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
In the Tomcat Server console, I am getting the following error:
INFO: Server startup in 7295 ms
May 20, 2009 6:36:48 AM org.apache.jasper.compiler.TldLocationsCache processWebDotXml
WARNING: Internal Error: File /WEB-INF/web.xml not found
May 20, 2009 6:36:48 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/sql cannot be resolved in either web.xml or the jar files deployed with this application
what is the problem with my code?
When running the same example, by creating a local server in Eclipse(creating new Server connection pointing to same Tomcat 6.0 installation) it runs fine without any error.

Hi evnafets,
Wow, very helpful information, great insight into working of Eclipse. Thanks a lot.
I have one more question. I have a context.xml file under {color:#0000ff}E:\Deepa\workspace\DBTest\WebContent\META-INF{color} folder and that has the Resource element to connect to MySQL database:
{code{color:#000000}}{color}<Context path="/DBTest" docBase="DBTest" debug="5" reloadable="true" crossContext="true">
<Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="deepa" password="mysql" driverClassName="com.mysql.jdbc.Driver"
{color:#0000ff}url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>{color}
{color:#0000ff}</Context>{color}As usual when running application in local Tomcat server of Eclipse, this data source works fine. But when I run the application on Tomcat, by starting Sysdeo plugin from Eclipse, the DBTest.xml file created in C:\Tomcat 6.0\conf\Catalina\localhost has the context entry as<Context path="/DBTest" reloadable="true" docBase="E:\Deepa\workspace\DBTest\WebContent" workDir="E:\Deepa\workspace\DBTest\work">
</Context>The<Resource> element I have specified in the context.xml of \WebContent\META-INF folder is not taken into account by Tomcat and it gives the following error:May 21, 2009 5:20:04 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.tomcat.dbcp.dbcp.SQLNestedException_: Cannot create JDBC driver of class '' for connect URL 'null'"
_at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(_QueryTagSupport.java:276_)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(_QueryTagSupport.java:159_)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(_test_jsp.java:113_)
at org.apache.jsp.test_jsp._jspService(_test_jsp.java:66_)
at org.apache.jasper.runtime.HttpJspBase.service(_HttpJspBase.java:70_)
at javax.servlet.http.HttpServlet.service(_HttpServlet.java:717_)
at org.apache.jasper.servlet.JspServletWrapper.service(_JspServletWrapper.java:374_)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(_JspServlet.java:342_)
at org.apache.jasper.servlet.JspServlet.service(_JspServlet.java:267_)
at javax.servlet.http.HttpServlet.service(_HttpServlet.java:717_)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(_ApplicationFilterChain.java:290_)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(_ApplicationFilterChain.java:206_)
at org.apache.catalina.core.StandardWrapperValve.invoke(_StandardWrapperValve.java:233_)
at org.apache.catalina.core.StandardContextValve.invoke(_StandardContextValve.java:191_)
at org.apache.catalina.core.StandardHostValve.invoke(_StandardHostValve.java:128_)
at org.apache.catalina.valves.ErrorReportValve.invoke(_ErrorReportValve.java:102_)
at org.apache.catalina.core.StandardEngineValve.invoke(_StandardEngineValve.java:109_)
at org.apache.catalina.connector.CoyoteAdapter.service(_CoyoteAdapter.java:286_)
at org.apache.coyote.http11.Http11Processor.process(_Http11Processor.java:845_)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(_Http11Protocol.java:583_)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(_JIoEndpoint.java:447_)
at java.lang.Thread.run(_Thread.java:619_)
{code}
So to overcome this error I had to place the <Resource> element in DBTest.xml under C:\Tomcat 6.0\conf\Catalina\localhost {color:#000000}and then it works fine. {color}{color:#ff0000}*Why is the context.xml file in META-INF not considered by Tomcat server using Sysdeo Plugin?*
*Thanks,*
*Deepa*{color}
{color}
Edited by: Deepa76 on May 26, 2009 9:32 PM

Help Needed REP-1800 Formatter error VGS-1701 Not enough memory

Hi. Gents
Help needed
I’m working on a Report, it gets some 2 million records and the report pages are approximately 52,000
It works fine if the pages are lesser then 48,000 or the data is less let say one and half a million, the problem occurs only after 48000 + pages formatted.
Report is generated successfully when trying to go to the last page it throw an error.
REP-1800 Formatter error
VGS-1701 Not enough memory
I have already gone through the metalink DOC Id 95505.1 as well as OTN
But all in vain,
Any comments or help much appreciated.
Details are:
Reports 6i (Clients/Server) on Windows platform
(Windows XP Professional with SP 2)
Database: Oracle9i Enterprise Edition Release 9.2.0.5.0
Computer:
Pentium(R) 4, CPU 3.00GHz, 1 GB of RAM
Still 20 GB free space
Thanks & Regards

I don't see the point in making a report with more than 48,000 pages, I think Al Gore will not be happy when you start printing it...
The problem might be caused by the fact that Reports needs to format all output at once, and then even 1GB of memory will probably be not enough. Formatting all pages at once is needed if you use pagination with displaying total number of pages. If you have this, try to get that out of the report definition and try again.

Help need to switch Muse site to BC on a allready hosted plan

Hi, i also posted on BC forum...
I have a client that was in a hurry to have his emails accounts before the entire website.
So i went on and bought the email marketing plan (cos he will also need to do email campains) an pointed his domain everything is working fine, at this moment he has his accounts the domain is live.
The site would be just a small 7-10 pages not to complicated.
Has a graphic designer (who has venture into Business catalyst cos it had all the solutions i needed, well that's what the promotional videos said anyway) I made a site in Muse.
First i did a temporary page thats says "comming soon", and then i made the entire site, all the design and menu but with blank pages cos the client didnt have all the content yet (and still dont have). I uploaded that site to a sub directory so he could see the evolution.
He approved the design, yay!
At the end of the process, he told me he needed to have full control with the editor. (style, images, bulleted list, need to put downloadable document like pdf etc.) i told him that he could only modify what was allready there with the Muse in Browser editing (that he saw when i made the pitch using another site) he was impress with the way it worked.
so i told him i would have to remake "template".
I thought of using a BC template, and modify the looks to adapt to my client image, Of course, use a responsive theme so he could make the change at one place only. (cos in Muse you need to make the changes on the 3 layouts).
Now, i created a new temporary site using one of the new responsive template available.
How can i import that new site onto his live domain? In other words, how can a switch from a theme made in Muse, to a BC template?
cant i just delete everything in the root folder, and upload the entire new site via ftp?
please help me find the solution. i am a bit in a panic here
hope you could understand my lousy English.
Sincerely,
i.d.

This would need to be transparent for m'y client...
Y
Envoyé de mon iPhone
Le 2014-04-20 à 15:29, Sanjit_Das <[email protected]> a écrit :
Re: help need to switch Muse site to BC on a allready hosted plan
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Thanks for additional details.
Unfortunately we cannot change site template of a live site in BC , but as a workaround Create a site from BC using the template you wish to use then publish the site from Muse to the site created from BC and transfer the contents stored from live site to trial site. Ater final transition is done , you can delete the already paid site and make live the new trial site which includes new site template.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6314730#6314730
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6314730#6314730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6314730#6314730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Point to point IP telephony help neede

Similar Messages

Maybe you are looking for