Pointer fixed at location

I have a new Mac Mini with a 27" thunderbolt display. This afternoon the mouse pointer (controlled by a tackpad) has locked into a position in the top right hand quarter of the screen. I can control the mouse but within a second of starting to move it, it jumps back to the same location.
I've rebooted the MacMini but this has has no effect.
The MacMini is running Mountain Lion 10.8.2 with ARD version 3.6.1 (which is the only way I can control the Mac itself.
HELP!!

WHAT A BERK!!
My son had left the Bamboo connected and the pen resting on the slate. You got to love kids...

Similar Messages

Custom top pointing to wrong location

hi,
our custom top pointing to wrong location.
we checked the CUSTOM ENV it is fine.
We changed the custom top location(to correct value) in context file and ran autoconfig. after running the autoconfig then the value is changed and pointing to old location only(wrong location).
we checked the default.env and topfile.txt everything is fine.
Please advice where to check to fix this issue.
or suggest me a a action plan.
Thanks in avance.
Regards,
DBA

Hi;
Please check below notes and link and compare steps wiht yours
CUSTOM_TOP yaratma
Re: Creating a Custom Application in Applications 11i
http://appsdba.info/docs/oracle_apps/sysadmin/R12/CREATECUSTOMTOPINR12.pdf
Regard
Helios

Shipping point at storage location level in ME2O

hi Guys,
I am using stock transport orders at storage location level, and it works fine, we have a customizing point to configure shipping point at storage location level.
My doubt is if we can use also shipping point det. at storage location level for creating Deliveries for Subcontracting process in ME2O.
It works only If I customize the shipping point det. at plant level, not considering the customizing at storage location level.
kind regards
Brian

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

Will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

Chances are the 2g itouch will not be included in the update. Also no one yet knows if it will be fixed in the next firmware but apple has said they know of this bug.

SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY

i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

How to get automatic plant and shipping point and storage location

hi,
sap gurus,
how to get automatic plant and shipping point and storage location automatically into the sales order
i have done all the config settings for that
but its not appearing automatically.
regards,
balaji.t

Hi
Balaji...
U can get the plant in sales order, by doing the default the same in customer master or in material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
For S loc u have to enter manually in the sales order u can not get it automatically.
Hope this will help you.
Thx.

TS1717 since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?

since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?
these are the boxes that open up:
I am unsure as to wether I need to unistall and start again but then worry about the vast amount of songs already in the folder that I would have to reload.

anyone able to help me with the above?

Change pointer for functional location- deletion flag & activation status

Hello,
Im trying to use change pointer for functional location outbound interface. I did all required settings in BD52. The problem is with deletion flag and acive/deactive status.
I found that those two are stored in:
table     field
TAPL     LOEKZ
TAPL     PARKZ
The problem I have is that I cannot find the object for those table, and due to that it cannot be customized in BD52.
Could You please advise which object class should I use or alternatively which other table/field and object should I type in to activate change poiters for deletion flag and active/ not active status?
For object IFLO, and its table (IFLOT, IFLOTX, ILOA)- there is no field for del flag and active status.
Thanks in advance.

Hi, standard didnt let us fulfilling this requirement. What we did- we extended table IFLOT with additional field for the status and used an user exit when saving FL, to take the value (status) from table JEST/TJ02T and copy the value to the newly created field. Then BD52, iflo, iflot, and the new field and it worked. Of course the function module for the message type (BD60) had to be changed to add this status value in additional segment/field for the idoc. Hope this will help You, as there is a lot of technical background behind it, and this is only functional overview.
rgds.

Group Policy Scripts point to network location

I am having a very odd problem with my Windows server 2012. I have some login scripts that I would like to run, but when I try to place the scripts into the file folder I am getting access denied. While checking the path and all the permissions (I AM IN THE RIGHT GROUPS) I am getting a network share location, rather than the SYSVOL\domain\policies\etc.... the policy points to \\network\SYSVOL\domain\policies\etc....
Can someone tell me what is happening, and more importantly, how do I fix this?
This topic first appeared in the Spiceworks Community

I am having a very odd problem with my Windows server 2012. I have some login scripts that I would like to run, but when I try to place the scripts into the file folder I am getting access denied. While checking the path and all the permissions (I AM IN THE RIGHT GROUPS) I am getting a network share location, rather than the SYSVOL\domain\policies\etc.... the policy points to \\network\SYSVOL\domain\policies\etc....
Can someone tell me what is happening, and more importantly, how do I fix this?
This topic first appeared in the Spiceworks Community

Listener is pointing to wrong location

Hi Experts,
I have installed 3 database in my one unix server. For one of the system the listener parameter file location is pointing to wrong path. It should point to /oracle/<SID>/11202/networ/admin/listener.ora but it is pointing to other system SID hence the error is like the user is not authorized to start the listener.
I checked the env of my system and which is fine. Please suggest where can i check the path for Listener parameter File.
Thanks and Regards
Gaurav

Hi Mate
Please check the following log :-
lsnrctl status LISTENER_ABC
LSNRCTL for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production on 16-FEB-2012 03:46:06
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=ABC.WORLD))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   IBM/AIX RISC System/6000 Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=ABC))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   IBM/AIX RISC System/6000 Error: 2: No such file or directory
Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=aytgfsredaa)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
Start Date                27-JAN-2012 14:58:35
Uptime                    19 days 12 hr. 47 min. 32 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /oracle/XYZ/112_64/network/admin/listener.ora
In the above log I am trying to check the status of LISTENER_ABC and it should go to /oracle/ABC/112_64/network/admin/listener.ora but it is pointing to /oracle/XYZ/112_64/network/admin/listener.ora
Please suggest.
Thanks and Regards
Gaurav

RSS pointing to wrong location

I moved the folder where my iWeb page was being published but the RSS link is pointing the old folder. I modified the html in Dreamweaver but when I resave and publish again using iWeb, the change is replaced.
Any way to fix this?

IF you were uploading it correctly, you would upload the whole folder, as it was published.
So your domain name
http://www.anotherexample.com
Would forward to
http://www.anotherexample.com/Sitenamefromsiteorganizer
A page on your site would look like this
http://www.anotherexample.com/Sitenamefromsiteorganizer/Pagename.html
OR in the case of a blog or podcast
http://www.anotherexample.com/Sitenamefromsiteorganizer/NameofBlogorPodcast/Name ofBlogorPodcast.html
The rss would be
http://www.anotherexample.com/Sitenamefromsiteorganizer/NameofBlogorPodcast/rss. xml
Individual blog entries would be
http://www.anotherexample.com/Sitenamefromsiteorganizer/NameofBlogorPodcast/long blogpostnamecreatedbyiweb.html

Font pointing to wrong location

In my document text using Lucida Grande has dissapeared. Upon sleuthing using "Find Font" I've discovered that Lucida Grande is actually pointing to a different font: /Library/Fonts/Stone Sans OS ITC TT. The other font used - Lucida Grande Bold works fine, and using "Find Font" it points to the correct location of /System/Library/Fonts/LucidaGrande.ttc
What is interesting is that the same problem appears on two different machines using two different versions of InDesign. The problem first appeard on my MacBook Pro using InDesign 5 but it also happens on my iMac using InDesign 5.5.
I tired creating a new document on both machines, and the problem follows.
How can I tell InDesign to point Lucida Grande to /System/Library/Fonts/LucidaGrande.ttc?
I tried copying the font to the /Library/Fonts folder, but the Mac OS X complains about duplicate fonts.

Hey there,
Lucida Grande is a system font, and should not be moved from the System/Library/Fonts folder. Doing so may render your Mac unbootable. The reason you're getting the duplicate font issue is because Lucida Grande must be present and in use at startup, and copying it into one of the other Fonts folders essentially tries to activate it again. It's probably a good idea not to use Lucida Grande in your design work to avoid potential system problems when packaging/loading the font onto another system.
Hope this helps,
Cheers!
-Mikey

When I open some images, blank white boxes appear on the image past a certain zoom point in random locations. This does not show up in the tools though (liquify, camera filter, ect). how do i stop this from happening?

It happens mostly at random, but once it shows up on an image, even if i close and re open it it will still show up. if i zoom out far enough it will disappear, but as soon as i zoom back in again it will reappear. its never in the same spot on different images and never the same size. i was already on with tech support and they deleted my settings folder which seemed to fix it for a short time (like a week), does anyone know what is causing this or how to fix it?
*this is not my art, just an example of it happening

it may have worked, but gimping my system isn't exactly a solution, more of a band-aid.
its the equivalent of the old
patient says, " its hurts when i do *this* "
doctor replies," well, don't do that "
What do you mean "it may have worked" – did it or did it not?
Anyway it is not a remedy but diagnostics and if it makes a difference it points at the GPU driver as a likely culprit.

Saving fixed pixel locations in presets and subsequently comparing those pixels.

Hello world.
I am abolutely new to plugin development and have been ploughing through the SDK and sample projects thus far, but I had a few questions about the approach with respect to what I wish to achieve and thought it would be best to pick the brains of everyone here.
I need to compare frames from a source video to a sample image which I shall call the target. I found how to do this using the Checkout example as well as the tutorial over at Mactech. However, the problem gets complex where I need to compare only fixed pixels from the source frame to certain fixed pixels in the target image. To give a better insight, I believe I should describe the problem statement a little better.
Scenario:
A user saves a target image along with the fixed pixels for comparison as a preset. The user also chooses the fixed pixels in a test source frame and saves this as well. The plugin takes the source video and the preset as an input and compares the fixed pixels to the target pixels. By 'compares' I mean some complex math would be performed in the CIE Lab space, but that is a discussion for later, and I'm taking this one step at a time.
Can someone please guide me as to how to set up this system to start with?
In short:
1. How do I store the x and y's of the fixed pixels in the source test frame and target as 2 presets? Possibly a custom data structure that would be bundled with the image?
2. How do I then access these and iterate only over those fixed pixels in a source frame and target image?
I am sorry if these are ridiculous questions, but I've been reading for a while and don't seem to be able to find these answers myself.
Thanks,
Chirag

hello chirag_raman!
welcome to our little forum, where everyone has an opinion, but no one knows for sure. :-)
what you're asking is not complex, so let's tackle the issues:
1. how to save a set of x,y coordinates:
i'd say it will mostly depend on how the user let's you know what these coordinates are.
i would imagine the simplest way would be to use a point param.
you can keep the coordinates in a point param and make it hidden in the case where you don't want the user to see it.
but there are a couple of other ways of keeping data with a plug-in.
you can either use an "arbitrary" type param, or use the sequence_data.
both of the above are means to store a structure of data that you create. you can put anything you want in it.
both methods allow you to modify the size of the stored data at (almost) any time.
in both cases the data is stored with the project file. (unless you don't want it to)
the differences are:
sequence_data -
you only have one of these per instance of your plug-in.
you handle the changing of the data, and it is not cached in the undo stack.
a change in the data doesn't cause a re-render.
arbitrary param-
you can have as many as you like in each plug-in.
a change of data in such param is undoable by the user.
a change causes a re-render.
look at the "ColorGrid" sample to see how to handle an arbitrary param, and the "Supervisor" sample for how to handle the sequence_data.
2. how to access specific pixels.
a couple of ways.
you can use the sample suite to grab the color of a pixel/subpixel/area from a buffer,
or you can access the position in ram directly and grab the data yourself.
look at the "shifter" sample to see the sample suite in action, and the "CCU" sample to see how to access the position in ram directly.
i hope this helps.
cheers!

Shipping point and storage location determination

for one of my delivery type i had defined shipping point determination as per following.
define shipping conditions
define loading group
assign shipping points: with combination of shipping conditionsloading groupplantprop shippping pointmanual shiping point.
i also checked the cmr and mmr both are correct.still system is not proposing shipping point and storage locatgion in my obd

Hi Charan
Shipping conditions is taken from sold to party
Pls check whether you are using a different SP and SH
Check in these t codes
In OVL2 are you seeing the shipping pt determination for your combination?
In OVL3 are you seeing the storage location determination for your combination?
If yes then shipping pt will be definately picked up in sales order
Storage location will be definately picked up in the delivery if you have assigned the rule MALA in OVLK
Have you assigned your delivering plant to your shipping pt in enterprise structure assignment?
This also check
Refresh the whole order and try again
If need be log out of SAP and relog and see provided you have youR OVL2 and OVL3 correct?
Note If shipping conditions are assigned to your order type in VOV8 then that will have priority over the shipping conditions of SP
So for that combination you should maintain shipping pt in OVL2
Regards
Raja

Pointer fixed at location

Similar Messages

Maybe you are looking for