Pointers to create datasource for Global Spend Analysis

Hi,
I have to extract data for Global Spend Analysis based on data from Financial Accounting from the special ledger created in R/3.The link
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/e8bc39b1702e4d99051ca14e2b769a/frameset.htm
says there are no standard datasources delivered by SAP. Please let me know if anyone has created such a datasource and also how u created it.Please provide me any document you may have to create sucha datasource.
Regards,
Joy
[email protected]

Hi,
Reporting solutions will work for other reporting tools also. MDM will provide accurate Master data.
Need of PI?? - MDM accept and syndicate data in form of .xml, flat file (Refer reference guides). PI is helpful to for data transfer as well as monitoring capabilities are also good. I am not sure about BIZTalk's capability to integrate with system's you have in current lanscape. If it is there then you can utilise Biztalk also.
Cheers,
Rc

Similar Messages

BI/BO necessary for Global Spend Analysis? PI necessary for syndication?

Hi! I have been reading about MDM and examples of how MDM can be used by companies. One is on its ability to provide accurate and consolidated data for spend analysis. I would like to find out whether the spend analysis solution is only applicable for BI/BO. What if the company does not have BI/BO? What examples of other reporting tools are available for spend analysis reporting?
Also, PI is mentioned to be needed for data extraction from remote system to be loaded into MDM. Similarly, it is needed for the syndication back to the remote system. May I find out whether PI can be replaced by another middleware such as BizTalk?
Appreciate any clarification on the above.
Cheers!
SF
Edited by: SF on Jan 18, 2010 1:08 PM

Hi,
Reporting solutions will work for other reporting tools also. MDM will provide accurate Master data.
Need of PI?? - MDM accept and syndicate data in form of .xml, flat file (Refer reference guides). PI is helpful to for data transfer as well as monitoring capabilities are also good. I am not sure about BIZTalk's capability to integrate with system's you have in current lanscape. If it is there then you can utilise Biztalk also.
Cheers,
Rc

SRM Global Spend Analysis Report

Hi Team,
Does anyone have any prior experience creating SRM Global Spend Analysis Report in BI 7.0.
I couldnt find the data source in SRM for Global Spend report, but I have the Infoobjects and cube from BI Content. Can anyone provide a step by step instruction on how to create this report in BI. Do I need to create Custom Datasources?
I am using SRM 5.0 and BI 7.0 with support pack 10.
Thanks
Anita.

Hi
I don't think you need to create custom datasource, as all the information is available in the system.
I have not tried this ever. Here are few details, which might help.
Global Spend Analysis
Accurate spend information helps you to optimize your supply base and, by indicating potential for demand aggregation across business units, enables you to control your procurement cost and negotiate better contracts with your suppliers. Global Spend Analysis now uses mapping information provided by SAP Content Integrator. The category mapping functions of SAP Content Integrator allow you to map products and categories to a standard category hierarchy (or schema). This could be an internal customer-defined schema or an external one, such as eCl@ss or UN/SPSC. Grouped key mapping for partner data delivers information on identical suppliers, which appear under separate IDs in the procurement systems. Both kinds of key mapping information are made available to SAP BW. The consolidated InfoObject technology in SAP BW then enables unified reporting across diverse master data entities in a heterogeneous system landscape, based on the mapping information delivered by the SAP Content Integrator. For mySAP SRM 3.0, the data extraction tools of MDM, which feed the master data into SAP Content Integrator, only support SAP R/3 systems. Therefore, the global spend scenario in combination with SAP Content Integrator only provides an out-of-the-box solution for mySAP SRMs classic scenario.
Refer to few links as well.
http://help.sap.com/saphelp_srm50/helpdata/en/6d/0f343e47fd6b2ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/3c/014b03cc304d2ea89d4540dc98b6e3/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/99/4dded1f9e1433a88bd510e631ee335/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/4d/fa243dfe075c59e10000000a114084/frameset.htm
Refer to few OSS notes as well.
956062 SRM 3.0 SP 11 (Stack 07/2006): Release and Information Note
759396 No totals display in report 0SR_FIC01_Q0009
751772 New roles for the purchase analysis as of BI Cont 3.5.2
649491 New roles for BW content for SRM as of BW 3.0B
87080 COMPUTE_INT_PLUS_OVERFLOW in report RSTABL10
624726
Hope this will help.
Please reward full points, incase it suits your requirements.
Regards
- Atul

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

How to create DataSource for FlatFile Source Systems

Hi,
I am practicing BI7.I am familiar with BW 3.5 but while practicing BI7 i am facing some problems.I am trying to load master data of an infoobject (STUDENTID) STUDENTID ATTR.
After creating Appl Comp and when i am trying to create transformations for the master data attribute i am unable to assign data source.I came to know that i have to create datsource at this step.But dont know how to create datasource for FlatFiles.
Can anyone give me stpes how to create DataSource.
Thanks in advance,
Sunny

Hi
Find below help link for procedure
http://help.sap.com/saphelp_nw04s/helpdata/en/43/01ed2fe3811a77e10000000a422035/frameset.htm
and below are some help links which will be usefull in BI7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Look at this new features in Bi 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
how to's in BI 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Demo's
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
Report designer new component
Most of ur solutions u can get through help or SDN search
Regards,
Ravi

How to create DataSource for BI Source System in RSA1?

I have a BI Source System defined, however I can't figure out a way to create a new DataSource for it. I can create DataSource objects for all my other Source Systems, but I can't figure out how to do this for this BI system.
I select my BI Source System, right-click, choose "Display DataSource tree". When I right-click from the DataSource tree, I expect to get "Create Application Component" and "Create DataSource" options, but instead I only see "Replicate Tree Metadata" and "Replicate DataSources" options.
How can I create DataSource objects for my BI system?

Hi,
I guess you want to create a custom developed source in BI itself. For that you need to create the data source in RSO2 and inside you need to give the specific aplication component under which you want this DS to be in. Generate a data souce and then go to BI My self Source system and then replicate that particular appl component o view your data source.
Hope this helps
Regards,
Srini

Create view for Global Temporary Table

if view is create for global temporary table so exactly how it works which helps regarding application performance.
Regaards,
Sambit Ray

A view is just a stored query. It can be on global temporary tables or regular one, makes no difference.

Cannot create datasource for MS SQL Server

Hi,
I'm trying to create a datasource for MS SQL server and I get this error
Connection test failed.
Login failed for user 'gdahan'. The user is not associated with a trusted SQL Server connection.
com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Lcom.microsoft.sqlserver.jdbc.SQLServerConnection;Ljava.lang.Object;Ljava.lang.String;Lcom.microsoft.sqlserver.jdbc.StreamError;Z)V(Unknown Source)
com.microsoft.sqlserver.jdbc.TDSTokenHandler.onEOF(Lcom.microsoft.sqlserver.jdbc.TDSReader;)V(Unknown Source)
com.microsoft.sqlserver.jdbc.TDSParser.parse(Lcom.microsoft.sqlserver.jdbc.TDSReader;Lcom.microsoft.sqlserver.jdbc.TDSTokenHandler;)V(Unknown Source)
com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon
The database is in "Windows authentication" mode (not "SQL authentication") and I can connect to it through "Toad for MS SQL Server". In this case I don't need to specify any username or password because I'm already logged in as gdahan on my computer. But when I try to create the datasource I need a username and password. Is there any way to specify to the datasource that I want to connect via Authentication windows ?
I tried with BEA MS SQL server driver and Microsoft SQL Server 2005 JDBC Driver 1.2[

Guillaume Dahan wrote:
Hi,
I'm trying to create a datasource for MS SQL server and I get this error
Connection test failed.
Login failed for user 'gdahan'. The user is not associated with a trusted SQL Server connection.
com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Lcom.microsoft.sqlserver.jdbc.SQLServerConnection;Ljava.lang.Object;Ljava.lang.String;Lcom.microsoft.sqlserver.jdbc.StreamError;Z)V(Unknown Source)
com.microsoft.sqlserver.jdbc.TDSTokenHandler.onEOF(Lcom.microsoft.sqlserver.jdbc.TDSReader;)V(Unknown Source)
com.microsoft.sqlserver.jdbc.TDSParser.parse(Lcom.microsoft.sqlserver.jdbc.TDSReader;Lcom.microsoft.sqlserver.jdbc.TDSTokenHandler;)V(Unknown Source)
com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon
The database is in "Windows authentication" mode (not "SQL authentication") and I can connect to it through "Toad for MS SQL Server". In this case I don't need to specify any username or password because I'm already logged in as gdahan on my computer. But when I try to create the datasource I need a username and password. Is there any way to specify to the datasource that I want to connect via Authentication windows ?
I tried with BEA MS SQL server driver and Microsoft SQL Server 2005 JDBC Driver 1.2[See the complete documentation for MS's JDBC driver
for how/whether it can do Windows Authentication.
This is completely at the driver level, not WebLogic,
except that (of course) WebLogic would have to be
running on Windows.
Joe

Create datasource for processing group text

Hi All,
I want to create a datasource in R/3 to pull the text for Processing group in BW. Currently only codes are pulled in BW for processing group. It would be great help if somebody can provide me details regarding the same. A step by step solution will be of gr8 help.
Thanks

HI
In R/3 execute the TCODE RSO2
Then create a text data source.(ZZ...)
Then assign the table from which you need to get the data, or create view for the required fields in SE11 first and then assign the VIew in RSO2 in the field View/tables,
Then Save and generate Data source.
Then come to BW select the application component under which you created the data source.
Replicate the data source.
Then assign info source.
Extract the data.
Regards
RaM

Question about Creating DataSources for FlatFile Data Acquisition

Hello eveyone,
I am trying to create flatfile datasources. I've been checking out the existing ds in my dev system and there are some infrastructure here that have loaded data in them, all via their won flatfile DS. I've been looking at the DS and am trying to figure out logic in which they are defined. I saw that most of the fields are defined in CHAR even if they pertain to fields like quantity, Amount and so on... They are also in the Internal format. Yet they have been successfully loaded...
My question is: what are the rules of thumb in defining the DS? How do i go about in mapping the fields to objects in the system? Can anyone please give me the step-by-step scenario as to how to do this please?
Many thanks,
Philips

Hi Philip,
Pls. try the following steps ..may be helpful.
1. when ever you want to create a flat file structure..keep in mind that, what are
    fields data available in your file. second thing is you need to know the IO of
    the info provider in which you are uploading.
2. simply create your own DS with PC File, and other hand open up your infprovider, and keep on check with your flat file what is the sequence of the data
fields and what are they corresponds to in the cube/ODS
3. As your flat file sequence, keep on identify the related IO of your provider and
copy it individual and paste it in your infosouce one by one as sequence of your
flat file..
4. No need to think of what type of data it is and how it is..
5. simply copy all your correponding IO (what ever of their type) even including
    some of the ref. IO.
6. And finally save and activate your DS creation.
I hope it would help in creating your own Flat File DS.
Need further info revert...
Cheers,
Thanks=Points.

How to create datasource for standalone application using JPA

In the persistence.xml configuration file, we have data source got it from web server configuration file, and created by server like Jboss or tomcat.
I just wonder how to create this same data source via Java stand-alone application?
I have Java standalone application embedded Jetty server running with JPA module. Question is how to setup or create data source from my Java application just like web server; which called by persistence.xml?
Thanks,

Hello,
Sharepoint deployment is completely different. I don't think you can deploy any solution as wizard in prod so you have to first identify what you want to deploy.
If you just want to deploy only web application then backup/restore process is available in sharepoint. you can use STSADM or powershell to deploy your web app.
http://technet.microsoft.com/en-us/library/ee748618%28v=office.14%29.aspx
If there is any custom code or .NET code then create a WSP package and deploy it on prod. If you have multiple WSP's then create a batch file (as exe package) then run this package on prod.
http://www.ironspeed.com/Designer/9.1.1/WebHelp/Part_VI/SharePoint_Solution_Package_WSP_Deployment.htm
Let us know in case any doubt
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Srm global spend datasources

hi
I need to extract data in 0SR_FIDS1 - ODS. As mention in DataSources in Global Spend Analysis Based on FI Data that (No DataSources are delivered with Global Spend Analysis based on data from Financial Accounting. The DataSources are generated after the special ledger is created in SAP Financial Accounting (SAP FI).
hi
please let me know step by step process for datasource?

Suneel,
Check this: [ SAP Supplier Relationship Management Brochures & White Papers |http://www.sap.com/solutions/business-suite/srm/brochures/index.epx?PageSize=10&ActualPage=2]
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Table for creating datasource .

Hi Experts
I am trying to create a report.
The report output is as follows
Companycode | business partner type | Business partner No | vendor no | customer no |cheque no | cheque date | cheque amount | check status | bank account no |.
Now to create datasource for fetching the above data I am trying to find the tables . All the data related to cheque is present in the table PAYR but from where can I get business partner number and business partner type .
Any clues ?

Hi,
If you are extracting data from CRM system then refer the below given tables for required information,
- BUT000 : BP: General data - Contains Business Partner Number, Partner Category, Partner Type, First Name, Last Name et
[http://wiki.sdn.sap.com/wiki/display/CRM/CRM+Tables]
Regards,
Durgesh.

Customization: datasource for 0SR_FIDS1(SRM)

Dear Experts,
There is no standard datasource available for SRM DSO(0SR_FIDS1).
Along with the DSO,standard infosource is also available in BI system.
Extract structure is provided in the blow link. click on datasource(left side)-->Data sources in Global spend analysis based on FI data.
In the below link,
http://help.sap.com/saphelp_nw70/helpdata/en/0b/f7d23c7f8eb55be10000000a114084/frameset.htm
let me know if any 1 worked on this extract structure ?
regards
kv

Hi,
As suggested by the SAP, there are no DataSources delivered by default. The Data Source will be generated once after the special ledger is created in Source (R/3).
Please check the link below.
http://help.sap.com/saphelp_nw70/helpdata/en/04/0b057fdc42ff4c9a38d07955d04d67/frameset.htm
Hope this can be helpful.
Thanks & Regards,
RAO
Edited by: RAO on Feb 12, 2010 7:17 AM

[Help] Cannot create datasource in Mapviewer

Hello. When I deploy MapViewer in OC4J standalone and log as oc4jadmin, i cannot create datasource for it. I edited mapViewerConfig.xml like this:
<map_data_source name="kuba"
jdbc_host="localhost"
jdbc_sid="orcl"
jdbc_port="1521"
jdbc_user="kuba"
jdbc_password="!BazaOracle1"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
/>
After saving and restarting MapViewer, in datasource table there's no items. Any idea, what's wrong? Here's the log:
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig destroy
FINER: destroying MapperConfig: connection manager, mapper pool and janitor t
ad.
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperPool destroyAll
WARNING: destroying ALL mapmaker instances.
2010-12-02 12:05:19 oracle.lbs.mapserver.oms destroyMV
WARNING: Oracle MapViewer shut down.
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig readVersion
INFO: MapViewer server version: Ver11_B091229
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig loadConfigFile
INFO: using default config file: D:\app\Kubix\product\11.2.0\dbhome_1\j2ee\ho
applications\Map Viewer\web\WEB-INF\conf\mapViewerConfig.xml
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig checkSecuritySetti
WARNING: dcsf:true
2010-12-02 12:05:19 oracle.lbs.mapserver.core.Dimmer startElement
FINEST: found a datasource: kuba
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig scrambleConfigFile
INFO: Passwords in the config file has been encrypted.
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig loadConfigFile
FINER: Loading configuration file: D:\app\Kubix\product\11.2.0\dbhome_1\j2ee\
e\applications\Map Viewer\web\WEB-INF\conf\mapViewerConfig.xml
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperPool destroyAll
WARNING: destroying ALL mapmaker instances.
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig checkSecuritySetti
WARNING: dcsf:true
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig setLoggingOptions
INFO: Setting logging options for MapViewer
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig setLoggingOptions
INFO: setting logging level to finest
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig loadMapViewerConfi
FINEST:
Allowed IPs:
Excluded IPs:
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig registerNSDataProv
rs
FINEST: Non-Spatial Data Provider registered: defaultNSDP
2010-12-02 12:05:19 oracle.sdovis.SDataProviderMgr registerProvider
WARNING: Spatial Provider shapefileSDP is already registered.
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig registerSDataProvi
s
FINEST: Spatial Data Provider registered: shapefileSDP
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig loadMapViewerConfi
FINEST: Data source kuba will get web user name from: J2EE_USER
2010-12-02 12:05:19 oracle.sdovis.ds.NativeOracleDataSource <init>
SEVERE: Connection Cache with this Cache Name already exists
java.sql.SQLException: Connection Cache with this Cache Name already exists
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.j
:138)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.j
:175)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.j
:240)
at oracle.jdbc.pool.OracleConnectionCacheManager.createCache(OracleCo
ctionCacheManager.java:188)
at oracle.jdbc.pool.OracleDataSource.cacheInitialize(OracleDataSource
va:301)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.j
:284)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.j
:179)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.j
:159)
at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSou
.java:233)
at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:122
at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.
a:797)
at oracle.lbs.mapserver.core.MapperConfig.loadMapViewerConfig(MapperC
ig.java:1572)
at oracle.lbs.mapserver.core.MapperConfig.loadConfigFile(MapperConfig
va:609)
at oracle.lbs.mapserver.core.MapperConfig.<init>(MapperConfig.java:36
at oracle.lbs.mapserver.MapServerImpl.<init>(MapServerImpl.java:131)
at oracle.lbs.mapserver.MapServerImpl.<init>(MapServerImpl.java:115)
at oracle.lbs.mapserver.oms$ColdStart.run(oms.java:300)
at java.lang.Thread.run(Thread.java:662)
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig createMappers
SEVERE: Error creating NativeOracleDataSource.
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig loadMapViewerConfi
WARNING: MAPVIEWER-00011: Error creating a map data source.(kuba)
2010-12-02 12:05:19 oracle.lbs.mapserver.core.MapperConfig loadConfigFile
INFO: Map Recycling thread started.
2010-12-02 12:05:19 oracle.lbs.mapserver.oms$ColdStart run
INFO: *** Oracle MapViewer started. ***
2010-12-02 12:05:20 oracle.lbs.mapcache.MapCacheServer restart
INFO: Map cache server is restarted!
2010-12-02 12:05:20 oracle.lbs.foi.FOIImageRecycleThread run
FINE: FOI image recycle thread interrupted.
2010-12-02 12:05:20 oracle.lbs.foi.FOIImageRecycleThread run
FINE: FOI image recyle thread terminated.
2010-12-02 12:05:20 oracle.lbs.foi.FOIServer init
INFO: *** Oracle Feature of Interest (FOI) Server started. ***
2010-12-02 12:05:20 oracle.lbs.foi.FOIImageRecycleThread run
FINE: FOI image recycle thread interrupted.
2010-12-02 12:05:20 oracle.lbs.foi.FOIImageRecycleThread run
FINE: FOI image recyle thread terminated.
10/12/02 12:05:20 Message:MAPVIEWER-00019: Specified data source does not exist.
Thu Dec 02 12:05:20 CET 2010
Severity: 0
Description:
10/12/02 12:05:20 Message:MAPVIEWER-00019: Specified data source does not exist.
Thu Dec 02 12:05:20 CET 2010
Severity: 0
Description:
10/12/02 12:05:21 Message:MAPVIEWER-00019: Specified data source does not exist.
Thu Dec 02 12:05:21 CET 2010
Severity: 0
Description:

Does restarting oc4j make any difference?

Pointers to create datasource for Global Spend Analysis

Similar Messages

Maybe you are looking for