Pointing BW DEV Client to a another client in ECC

Hi Folks,
I have a questions on BW & Basis.
We are having multiple clients in Ecc Development
ECC DEV i.e DE0 100 200 300.
Our BW Client is pointing to ECC DEV 200.
Now to ensure data integrity, We want to point the BW Client to DEV 300.
DEV 300 has only conversions. And the Data in 300 is more accurate.
And ofcourse, delete the previous master data and transactional data in BW and do the dataloads again in BW.
Can you advise:
If this will affect the present development happening in BW. Please note BW its the same client, but pointing to a different client in ECC within the Development Environment.

Thank You for the responses.
We are using ECC 200 for BW Extractions. Now BW Dev is pointing to ECC 200 Datasources. But the chart of accounts is completly messed up. Refereshing the data in 200 from 300 will not help as the Chart of Accounts and other issues.
So We want another client copy of ECC 200 to ECC 300.
And the functional team wants to do conversions in this new client.
Our concern, is
Can we change the pointer of BW DEV to this new ECC Client 300.
If Yes, will this effect my current development happending in BW.
Our Development is mostly happending on the reporting side. We completed the Desing of the BW Backend.

Similar Messages

  • Is it possible to send varient from one client 800 to another client 810

    hi
    is it possible to send varient from one client 800 to another client 810,
    could u plz explain clearly,

    Hi,
    You can use the transport mechanism to transport variant.
    Go to SE38, type in the report name and choose "Variants". Then select the variant and choose the menu Utilities -> Transport request. Add the variant to an existing transport.
    Then use the standard procedures to move the transport request from client to client.
    Hope this helps (please reward me if it does).
    regards, Joerg

  • How to reach an Oracle BI Server (client 1) from another client (client 2)

    Hi all, I'm new to the BI EE's world and I have a connection's problem.
    I have installed Oracle BI EE 10.1.3.3.2 (Complete installation - all component) & Oracle 10g DB on my pc (pc 1). The BI server is started.
    ..and then another colleague of mine installed only Oracle BI EE 10.1.3.3.2 (Oracle Business Intelligence Client Tools) on her pc (pc 2).
    Now, from the pc2, with Oracle BI Administration Tool we want to have access to the Oracle BI Server installed on the pc1.
    Now, my question is this:
    Which steps I have to follow in order to open a repository located on the pc1 with Oracle BI Administration Tool located on pc2 ? I know we have to modify the NQSConfig.INI file...but HOW ?
    Any helps will be appreciated
    Alex

    Hi,
    If you want to open the rpd in offline mode, just open the .rpd file sharing the server's folder. In online mode you need to create an odbc to the server, in System DSN, choose the OBI EE driver, port, login etc, when you click in the open online icon, you will be able to choose the ODBC.
    Regards.

  • Error while copying GL Accounts from One Client to another client

    Hi,
    We are trying to copy GL accounts created in one client to another client (Company Code is same in both the clients). First we executed FS15 (send) and a file was created on the server. With the help of BASIS team we checked that file and it contained the required values. However, when we are doing FS16 (receive) we are getting following OK messages:
    File /usr/sap/DEV/SYS/global/FBISABC is being checked
    Session 1 session name RFBISA20 : No terminations have been found
    However, at the same time we are getting following error message:
    File name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X is unknown
    Message no. SG001
    Diagnosis
    No entry was found in the conversion table for the logical file name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X.
    Procedure
    Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
    Can someone please advice is there something wrong that we are doing for copying GL accounts from one client to another client.
    Thanks,
    Sanjay

    Dear Sanjay,
    Did you check the batch-input? SM35
    It could have happend that there was a mistake in the batch-input data and that the destination file has not been written. If this has not been written it could not be found.  (I.E. you tried to transport G/L Accounts with deletion flags but did activate the checkbox "Transfer deletion ****").
    There is another point: Did you activate the box "Datei nur prüfen" (English: Check file only)? If this box is activated the programm will check if the batch-input-file will be written without mistakes but it will not write the file. Only if the checkbox is not activated the batch-input-file will be written. (the same with FS16).
    Kind regards
    Maike
    Edited by: Maike Nemeyer on Dec 1, 2011 8:52 AM
    Edited by: Maike Nemeyer on Dec 1, 2011 11:45 AM

  • How can I transport data from one client to another client?

    How can I transport data from one client to another client? 
    Regards,
    Subho

    hmmm, CTS = cutomizing transport?
    If you have a customizing table, there are still two possibilities.
    1. customize in DEV system and transport
    2. customize right there where you need it.
    this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

  • Office 365 Streaming Notifications, "One or more subscriptions in the request reside on another Client Access server."

    Hello all,
    I am maintaining a part of our product that requires monitoring mailboxes for events.  This is currently being done by using streaming connections for getting the notifications.  Our solution has been successful for situations with smaller numbers
    of mailboxes, ~200 or less.  However we are seeing some issues when scaling up to say, 5000 mailboxes.
    The error and the sequence leading up to it are as follows:
    Make an Exchange Service Account.
    exchSvc.ConnectionGroupName = someGroupName;
    add to the httpheaders ("X-AnchorMailbox", userSmtp) and ("X-PreferServerAffinity", "true");
    create a new impersonated UserId for the userSmtp address that is our anchor mailbox.
    set the Exchange Service account ImpersonatedUserID to the one we just made.
    ExchangeServiceAccount.SubscribeToStreamingNotifications(new FolderId[] { WellKnownFolderName.Inbox }, _mailEvents);
    to this point everything was successful, saw no error messages.
    we create a second impersonated UserID for a different mailbox, and repeat the process above from that step forward.  Upon the final step, subscribing to the streaming notifications we get the error:
    Exception: Microsoft.Exchange.WebServices.Data.ServiceResponseException: One or more subscriptions in the request reside on another Client Access server. GetStreamingEvents won't proxy in the event of a batch request.
    This is only the second subscription that we are trying to add to this connection, and it is to a different mailbox than the first.
    Can anyone please help point me to where this is going wrong?

    >> Is there a good way to verify the number of subscriptions in a group?
    Not that I know of you should be tracking this in your code there are no server side operations in EWS to even tell you if there are active subscriptions on a mailbox.
    >>The error I am getting is on the second subscription in a new group, just after doing the anchor mailbox so I don't think we are hitting the 200 limit. 
    It's hard to say without seeing your code but it sounds like there is problem with your grouping code. One way to validate this is that with every request you make with the EWS managed API there is a
    RequestId header http://blogs.msdn.com/b/exchangedev/archive/2012/06/18/exchange-web-services-managed-api-1-2-1-now-released.aspx
    you should be able to give that RequestId to the Office365 support people and they should be able to check the EWS Log on the server and tell you more about what's happening (it maybe server side bug). Something doesn't quite add up in that the X-BackEndOverrideCookie
    is what ultimately determines what server the request ends up at and the error is essentially telling you its ending up at the wrong server (have you looked at the headers on the error message?). Is it always one group of users that fails have
    you tried different groups and different combinations etc.
    Cheers
    Glen

  • How to Pass a data from Client to another client

    Hi Gurus,
             Below is my requirerment
    1. We got 2 clients, assume 100 & 200 in a same server
    2. If i post any transaction in MIGO and save it, Automatically the values has to be  passed to the client 200.
    How I could achive this ?
      Rewards Assured for any helpful answers
      Thanks in Advance
       Jai

    hi jai,
    Use STMS.
    Click on the “import overview”
    Double click on your target system
    Click “refresh”
    Click on “import all request” or ctrl+F9
    Specify the target client
    Execute the transport
    Done…
    But this will import all request…
    You can use Extended Transport Control.
    Extended Transport Control is another way to set up the Transport Route so that the route is system and CLIENT specific.
    In other words, when you release a change request in DEV Client 0XX it will not only automatically be added to the Import Queue for QAS but also 0X1, 0X2, of DEV.
    To set this up requires the steps below:
    1) Open the file TP_DOMAIN_DEV.PFL (located on your transport domain controller such as the DEV box. The file will be in usrsaptrans/bin)
    Edit with notepad for each parameter on each system:
    DEV/CTC = 0
    Change to =1
    2) Next you need to create Target Group before creating the transport route.
    Create a Target Group:
    Access the initial screen of the graphical or the hierarchical editor in change mode. STMS > Overview > Transport Routes (the default editor will appear, either Hierarchical or Graphical, to change the default editor : STMS > Extras > Settings > Transport Routes. You can also switch to one or the other from Goto > Graphical Editor.)
    Configuration > Display Change > (or change icon or F5)
    Edit > Transport Target Groups > Create
    In the dialog box, Create Target Group:
    Enter a name for the target group /GR_QA/ (The name must begin and end with a forward slash /)
    ...and a description Targets for Consolidation route
    Choose “Insert line”
    Enter the required target system/client combinations
    Use a separate line for each client.
    Example:
    Target System
    Target Client
    Client Name
    DEV
    0X1
    Sandbox
    DEV
    0X2
    Testing
    QAS
    0XX
    Quality Assurance System
    The idea is that we want to include the clients that will get an addition to their import queue when we release a change request from DEV.
    Choose Transfer
    Now you have to change the transport route to include the Target Group you created.
    STMS > Overview > Transport Routes > F5 (change mode) Edit > Transport Routes > Delete
    Now create a Transport Route with Extented Transport Control:
    STMS > Overview > Transport Routes > F5 (change mode) Edit > Transport Routes > Create > Extended Transport Control icon at lower left of dialog box. > Consolidation route, enter integration system and transport layer. In Target system/client enter the SID of either an R/3 System and a client or an existing Target Group.
    Each System must be specified by System and Client. The Target Group can be used for the consolidation system.
    Distribute and activate the changes as usual by choosing Configuration > Distribute and activate
    NOTE: After you set up Extended Transport Control there might be requests in an import queue that will show a red status in the CTL column. This is because these change requests need a client specified before they can be imported. These are old requests that were already in the queue.
    From Import Queue Screen Mark the change request
    Choose Request > Target Client > Set
    Enter the Target Client ID and choose Enter.
    To change a target client before starting an import:
    Import Queue Screen > mark Change request > target client > change > enter target client id and choose enter.
    Don't forget to reward,
    Thanks & rewards,
    Kalyan.

  • Purchase Order Data transfer from one client to another client

    Suppose i have created some purchase orders in one client( development server) and that are accurate according to our need .
    Now instead of creating same purchase orders again in production server is a useless task.
    SO i want to upload these purchase order directly from SAP development client to production client.
    How to execute this task.
    Please help me  out.
    I think it needs ALE concept .
    I know the ALE concept but i never uploaded the transaction data through ALE only i have uploaded the MASTER DATA.
    For eg i have transfered the material from one server to another server but never transfered the purchase order.
    CAN anybody help me out with simple example then it will greatful to me.
    Thanks a lot

    hi u can use BAPI to call that PO FROM ONE CLIENT TO ANOTHER CLIENT.
    FOR that, use, data: wa_destination type gsval.
      CASE sy-sysid.
        WHEN 'DVH'.
          CONCATENATE 'DVC' 'CLNT' '021' INTO wa_destination.
        WHEN 'QAH'.
          CONCATENATE 'QAC' 'CLNT' '129' INTO wa_destination.
        WHEN 'SUH'.
          CONCATENATE 'SUC' 'CLNT' '222' INTO wa_destination.
        WHEN 'PRH'.
          CONCATENATE 'PRC' 'CLNT' '222' INTO wa_destination.
      ENDCASE.
    call function  BAPI_PO_CREATE DEATINATION WA_DESTINATION
    COMMIT
    REWARD POINTS IF THIS IS USEFUL

  • HOW TO COPY A FORM FROM ONE TO ANOTHER CLIENT

    HOW TO COPY A FORM FROM ONE TO ANOTHER CLIENT

    Hi Tina,
    To copy either a Script or a Smartform fron one client to another client i.e from reference client 000 to any client say 010  follow instructions as given below:
    Go to Tcode SE71->Give Form name MEDRUCK then go to Menu path Utilities->Copy From Client, give
    Form Name: MEDRUCK
    SOURCE:000 (it will be already there)
    Target Form: Zmedruck(here give ur form zname)
    Execute
    It will be copied into all languages.
    Then come back to SE71
    Give your form name Zmedruck
    Language:: de then goto change mode
    then menu path->utilities->convert original languge to En and enter you will get a message original language of form zmedruck converted from de to en,
    now  change language de to en in se71 main screen and then do what ever changes you want to do , this is how you can copy a script or smartform from one client to another client.
    If this answer is useful reward points any queries revert me back.

  • Transport on client to another client

    Hi Guru's
    how to transport configuration settings one client to another client or production client, which tools we can use for transport,
    thanks in advance

    Firstly you configure your changes / settings. Save it.
    On the menu bar itself, under the first heading option of TRANSPORT is itself provided. Check the menu bar and search for TRANSPORT function.
    Use the TRANSPORT function. A pop up box asks for the details and specific name of the transport request.
    Secondly, go to SE10, whereby check for all the tasks transported; i.e. check all the option boxes. The options are - Customising Requests, Workbench Requests, Transport Copies, Relocations.
    Check all.
    Go for the DISPLAY button of this first page of SE10.
    It displays all of the requests sent.
    Then the specific name you provided, that very request would be displayed, along with others, in blue. Single click, which selects it. A cursor like mark is there.
    Go for the TRUCK button just up ahead, below the caption of the page in blue.
    Hit it and and try refreshing it to ensure it has been transported. Successful execution shows a tick mark alongside your request.
    Assign points.

  • Transfer data in the Ztable from one client to another client in a same ser

    Hi all,
    How can i transfer or move data in the Ztable from one client to another client in a same server .
    Thanks
    Ajay

    hi,
    create a transport request (Workbench type) and add the following line into the transport request:
    R3TR TABU name_of_table
    save and doubleclick this line and enter the table keys for the required entries (if you need all antries: client and an asterisk will do).
    When it is done save again, release the transport and ask basis to import into target client (or you can do on your own in SCC1 transaction)
    hope this helps
    ec

  • How to transfer file from one client to another client?

    hello,
    i have some questions and hope you all can help me..thanks a lot first..
    Here are the questions:
    i) How can i send a file from one client to another client using RMI?
    ii) Does the client(sender) need to send the file to server, then server save it and then send it to another client(receiver)?
    iii) If using RMI, a client can receive two files from same client(sender) or different client(sender) at a same time? how to do it? when both of the files come in from same port, how to differenciate them?
    iv) For your information, i am doing the File Transfer Server-client application which sender can send any file to other client. Can you give me any ideas? thanks..
    Last, thanks again..

    Your questions reflect some ambiguity in terms.
    "Client" and "server" are commonly used in two different senses:
    1. Technical sense: A client process makes requests, and a server process fulfills the request (provides a service).
    2. IT sense: A client computer (process) makes requests of a server (computer) process, and the server (computer) processes the request.
    In the first case, any computer might be a client, or a server, or both, depending on the processes being executed. In the second case, the computers are assigned some role.
    So: If you wanted to, you could implement client/server processes communicating between two peer computers, using RMI.
    This may not be what you wanted; if you really want to distinguish client and server computers, then the answer is that yes, you will probably put files into intermediate storage on the server computer.
    Finally, you probably do not have to worry about port conflicts if you use RMI; while the initial client server contact is established through a registry operating on a standard port, the actual RMI communications is established using random ports, one for each link.

  • How to transfer data from one client to another client

    Dear Experts,
    Please explain how to transfer data (Materials) from one client to another client?
    Thanks,
    Ajay Kumar

    Hi Ajay,
    Check any of below methods
    Refer thread http://scn.sap.com/thread/171981 where people use IDOCs for master data transfer.
    OR
    This is done by BASIS team, by client refresh or client copy. Check with your basis team for this and there is some predefined time when they plan this activity, and in most project they do it once in 3 months etc to get production environment in test system which helps to resolve issues of production by creating similar case in test system.
    Check below threads for more information
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/cleint-copy-vs-client-refresh-1377848
    http://basissap.blogspot.in/2008/05/what-is-client-copy.html
    OR
    You can download data from one client and upload in another through BDC or LSMW.
    Regards,
    Sharat

  • Transfer master data from a project from one client to another client

    Hi all,
    I have a training client and a production client.  The project master data has been created (Tcode CJ01) in training client with multiple levels and WBS.  Is there a way to transfer the master data from the training client to another client so there will be no need to create the same project in another client?
    Thanks.

    Refer note for 37899 batch input option.
    Though this pertains to older versions with few changes to code it might be suitble to the version you are working on.
    Regards
    Sreenivas

  • WDTHEMEROOT works in one client but not another

    I'm looking at using the WDTHEMEROOT application parameter to set a theme. I've set it to 'sap-chrome' in our development client and that works fine when I test the application. When I log into another client on the same system, however, the WDTHEMEROOT  parameter has no effect. I'm guessing there is a setting in the first client but not in the second but I don't know what that might be. Any ideas ?
    thanks,
    Malcolm.

    Well,
    I guess my excitement was shortlived. I changed the theme and did whatever the note suggested. It worked!
    But then I changed it back to 'sap_chrome' and did all that the note suggested - it did not work. I am now stuck with the new incomplete theme and am  not able to change it back to what it was earlier.
    Any Help?
    Thanks,
    Sanjiv

Maybe you are looking for

  • JMS Receiver Adapter configuration help

    Hi Experts, In our scenario, we need to integrate MQ series with SAP PI, where in we are using JMS Sender and Receiver adapters to put and get the mssg from correponding IBM MQ queues. Using Sender JMS Adapter we are consuming a txt mssg by specifyin

  • REST web-service invocation gives error ORA-29266: end-of-body reached

    We are trying to consume a REST web-service. We send county code and country name to the WS, it then inserts the data and sends us a response in XML. I used this PL/SQL code to invoke the rest WS. http://blog.warp11.nl/2011/07/calling-a-rest-webservi

  • Hyperlink in Se61 text

    Hi All, The requirement is to add a hyperlink in se61 email text and this text is added in config to send the emails. How do i add a hyperlink in the se61 editor..tried <a href= "">Text</a> but it gives a syntax error for </a>. Please suggest. Thanks

  • Edit pdf with Adobe Reader Pro XI?

    How do I edit a PDF file with Adobe Reader Pro XI?

  • Changing Certain Node Icons

    I can't seem to figure out how to change certain node icons in a JTree due to a 3 letter string. For example 2 nodes one saying "Intro" the other say "Edit - SEC" - the one with SEC has a different icon to "Intro" MyRenderer class, here the code whic