Points for my Profile changed from thousand to Zero

Hi,
I had some 53K points but immediately it changed to Zero(0). Is some update going on ?
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

I replied in your thread here:
http://social.technet.microsoft.com/Forums/en-US/de7bd69f-b600-4514-858d-971299c093f3/points-for-my-profile-changed-from-thousand-to-zero?forum=reportabug
Seems to be happening for everyone.
EDIT: I've sent an email to fissues, I'll post back when I hear something.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Similar Messages

Trigger CREMAS change pointer for vendor classification change in XK02/FK02

Hi,
I have a business case where I need to trigger a change pointer of type CREMAS whenever a client modifies vendor classification in transactions FK02/XK02. I realize classificatiion/characteristics have their own change pointer types (CLFMAS, CHRMAS, etc.), but I was wondering if there was a user exit/BADI available for this scenario where I can manually create a change pointer. I need the characteristic data to be part of a custom IDoc type (based off of CREMAS03), and it's no problem to include this data in the custom IDoc, but I need a way to trigger the change pointer if the clients changes vendor characteristic data, and nothing else.
I also went into transaction BD52 for type CREMAS to see if there's another row for classification (CLASSIFY), but couldn't figure out the right object type.
There's a BADI called CACL_VALUE_CHANGE that triggers when vendor classification is changed, where I can generate my change pointer, but it's triggered before the client saves which means I would have a useless change pointer.
Does anyone have any ideas on what my options are? I hope I've elaborated enough
Thanks,
Chris

I figured out a way to do this which was to implement the BDCP_BEFORE_WRITE BADI which allows you to interrogate a change pointer based on an IDoc message type before it's saved to the database. For starters, change pointers for message type CLFMAS must be activated in order for this to work, even though I'm not interested in those eventual IDocs.
In the IF_EX_BDCP_BEFORE_WRITE~FILTER_BDCPV_BEFORE_WRITE method of the BADI implementation, I was able to loop through all of the change pointers about to be created and this is where I was able to obtain the vendor number the classification is being applied to. I actually added another line to the internal table that's changeable in the method for CREMAS and it worked out well.
The only thing that was difficult was to debug this baby. No matter how you set the breakpoint, it just never hits it until I discovered it's called using an UPDATE TASK. I found an unorthodox method to debug this situation on the web which is to force an endless loop before your custom code such as.........
while sy-subrc <> 98.
endwhile.
<custom code here>
Once your process runs, it will be sitting in an endless loop in an update task which you can view in transaction SM50. From here, you can highlight this line then you can click on "Program Session > Program > Debugging" to debug your code. It's not something I was used to, but it allowed me to debug in the end. I would hope there's better ways, but this worked for now.
I hope this helps someone else!
Cheers,
Chris

EXIT/ BADI/ Enhancement point for User Status change in Order

Hi all,
I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
Thanks and Regards,
Sonal

Hi,
Use this Enhancement IWO10009 and call these function module to change the User Status
STATUS_TEXT_EDIT --> To Read the existing status.
STATUS_CHANGE_INTERN_VB --> to change the status.
Regards,
Satish

Flash 8 - zero point for x, y changes in slide screens

When I begin building a slide presentation in Flash 8, the x
and y zero point for the stage is at the top left where I would
expect it to be. So I place a few things on the stage, add a slide
or two and suddenly the zero point is in the center of the stage. I
am not sure when exactly it happens or why. How do I stop this from
happening? How do I correct or set the point back to the top
left?

Actually our users are complaining that the Flash 10 grayscale antialiasing on device fonts does not look as good
as the Flash 8 style antialiasing.Virtually everyone uses LCD monitors now, and it seems like the Flash 8 color
dithering produce better results on these displays.
It is demonstrated that the Flash 10 player will render device fonts with
different algorithms when it is using AVM1 or AVM2, so what I would like to know is if there is any way to have programmatic control over this
choice in my Flash 10 application, so I can get the Flash 8 style antialiasing, or control other parameters on a device font, like sharpness, etc.

Printing a PO change from me22n for z-field change from subscreen

I have incorporated a subscreen in PO me22n.Now I want to automatically trigger PO printing for any change done to this ztable-zfield on subscreen!
I tried setting the customizing option where we can add our own print relevent field to trigger printing for PO.I added here my ztable-zfield .When I change this field via PO subscreen,it tries to trigger for ZNEU (my output) and fails with RED! stating no print relevant changes made to PO!
I also tried triggering for a EKPO-Zfield by first setting the customizing and then triggering printing for a changed field...
ANY LIGHT on this OR ANY KNOWN OSS HELP appreciated!Regards,Shankar

Hi Jeet,
I want the PO to automatically trigger the ZNEU output just like it successfully does for create mode.not from ME9F!
In MM customizing > table T166C is where we add print- relevant fields and table names -->whose value changes for any PO should trigger an output automatically.Apparently this is not recognizing change to a ztable-zfield or even ekpo-zfield from a PO.
Now this field for my client's POs happens to be in my custom subscreen a ztable-zfield for line item in PO.
Yes the messages,further data,communication method are all set proper.
Since you mentioned,I also checked NAST and it has entry in NAST...that is why I am getting RED radio in messages..it is apparently trying to output and then it finds this field change for the PO is not print relevent field change!
any light on how to trigger an output manually programmatically from userexit or something when ever this zfield in a PO is changed using Me22n ?

Duration for transition wont change from 00:00:00;22

I am trying to add a Dissolve transition between 2 clips in the timeline but the duration won't change from 00:00:00;22. I set the time in the transition editor and and drag it to the timeline but it still changes to 22 frames. I have tried dragging the clip handles out but it won't change, I use Control-D to get the Duration dialog and when I select OK it beeps at me.
Thanks

I did search and found the answer.
http://discussions.apple.com/thread.jspa?messageID=4537254&#4537254
Thanks

The network location profile changes from "Domain" to "Private" in Windows 8.1.

I have a network which is centered around a Server 2012R2 installation with the Server Essentials Role installed. I have installed and configured a DNS server which points to the router and open DNS as forwarders.
There are 3 physical computers on my network and two additional virtual ones (the vm's are hosted on the server).
The server shows the domain profile.
VM1 - Server 2012R2 virtual machine core install hosting a SQL server - it shows the domain profile
VM2 - Windows 8.1 enterprise evaluation - Shows the domain profile
Desktop - Windows 8.1 pro with media center - shows the domain profile
Laptop - Windows 8.1 enterprise evaluation - shows private profile
Surface Pro - Running Windows 8.1 pro - shows private profile.
They all have network discovery enabled for all network types.
As I was writing this my surface randomly shifted to domain again. However my laptop shows private (I am writing this from my laptop)
This is a problem because it appears my devices are having trouble finding and discovering other network devices because of this.
All of the devices have the same gateway, dns settings, and subnets settings.
All of the workstation except the VM server have the server essentials connector installed.
Please let me know if there is any additional helpful information I can provide to get this resolved.

IMPORTANT: I found the solution. Another user figured it out and posted the answer on another thread.
Please spread this around to all other Outlook support techs so they know to point people in the direction of the quick (though very obscure) fix to this problem.
See this thread for how to disable graphics acceleration in Office, which iswhat causes the rundll23 error.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/rundll32-outlook-mail-windows-host-process-error/bf90e1fd-3985-4b15-bc50-f9b3e937a859?tm=1424345216297
Thanks,
Jason

IP Profile changed from 7Mbps down to 2Mbps

Not sure what's going on but my IP Profile has changed overnight. It was slightly over 7Mbs but has dropped to 2Mbps. I have contacted BT about it but am getting nowhere. Can someone here help please, as far as I can see the profile needs resetting by BT were less than helpful when I asked for them to do this?
Solved!
Go to Solution.

This is for the moderator.
Hi many thanks for your help. It's 8.30AM 9 May, unfortunately nothing seems to have changed since you reset my IP yesterday so far, so my IP profile is still 2Mbps. My router has been left on since last Thursday and it seems ok. Router stats and speed test results from today below. I have also done everything asked by BT since last Thursday that is I have changed the filter for a new one, and tried using cable connection. I have tried phoning BT since but I was left on hold, last Friday and yesterday for 18 minutes.
I have also noticed that my Internet usage seems to have trebled from what is the norm which for me is around 7GB per month. I have used 4GB already this month. I have no wireless security issues and have changed my password. I don't know if this ties in?
regards Rob

Book profiles change from RGB 1998 to sRGB when exported

My printer guy tells me that when I export a book from Aperture, the profile it attaches is srgb and I want Adobe RGB1998 which I've change the presets to do, but they change on conversion to a pdf file How can I fix this? I need the color space of RGB1998 and srgb is killing my colors. Anyone got an answer to this!!!

In 99% of cases you want the RAW file.
Can I ask why you're shooting RAW+JPEG? In general, unless you have a very specific workflow (i.e. shooting 2000 shots for a sporting event, and getting them to an editor), a RAW-only workflow makes a lot more sense than RAW+JPEG because with Aperture you can create a JPEG from the RAW any time you want.
So keep the RAW file. But Aperture will import them both, and managing that takes more work and effort unless you have a very specific reason for shooting RAW+JPEG.

My profile changed from 8Mbps to 0.5Mbps over the ...

Hello,
I returned home after the weekend to find that my BT Broadband connection was very slow and randomly disconnected and connected while browsing the internet. A BT Speed test revealed that my profile is set to 0.5Mbps as the default download speed instead of the original 8Mbps that I had been enjoying for months.
Is it possible to have a Broadband technician to remotely reset my profile to the original 8Mbps download speed? Or will it be necessary to have the technician visit the switch to make the change? I anxiously await a reply...
Thank You!

Hi john46,
And just like that we are back again... to even faster downstream speeds. Check-out the results below:
BT Speed Test Results:
The BT Home Hub 3 has been connected to the test socket of the main socket via a microfilter for almost 3 days now. The main socket is in an awkward location of the house and I had to run a power extension cord to supply power to the router and connect it to a powerline network adapter. Since this is only a temporary arrangement I am concerned that once I relocate the router to its original location the symptoms may start to show up again (i.e., the lower download speeds). Should I leave the router in its present location for a while longer and let the line "settle-down"?
Your thoughts welcomed...

"Poor Signal", "Coverage hole pre alarm for client" after changing from Autonomous to Lightweight infrastruture

Dears,
I use to have wireless infrastructure based on autonomous APs 1142n, auth w/ 802.1x and everything was fine.
My Company decided to implement WLC 5508, and I changed only 2nd floor (2 APs) as lightweight and implement WLC over there as pilot testing...
Now All persons here (around 35 clients) are complaining about disconnections, poor signal...
Both APs are distant each other maximim of 15 meters... Our office has a medium open spaced room, with (20 X 15 meters) only 2 "Pilaster" in the middle of the room.
I am facing this message at WLC logs
Thu Nov 1 16:03:57 2012
Coverage hole pre alarm for client[1] 00:37:6d:eb:67:44 on 802.11a interface of AP 00:26:cb:4c:8e:b0 (AP01-RJOBTF). Hist: 1 0 3 4 1 1 2 7 2 9 10 13 4 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Thu Nov 1 15:55:21 2012
Rogue AP : 7c:4f:b5:ed:27:a1 detected on Base Radio MAC : 1c:aa:07:6e:93:20 Interface no:0(802.11b/g) on Channel 11 with RSSI: -92 and SNR: 1 and Classification: unclassified
Thu Nov 1 15:50:27 2012
Coverage hole pre alarm for client[1] 28:e0:2c:6d:11:58 on 802.11b/g interface of AP 00:26:cb:4c:8e:b0 (AP01-RJOBTF). Hist: 0 0 2 5 11 16 9 2 5 12 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Is there any best practices I should perform over here ?
Any specific configuration with the signal itself ? In my opinion we dont have a big room here .. 2 APs should work very well... but they are not...
I also can see many Rogue APs... I am not sure if that rogues aps have anything to do with this problem.... also I didnt change anything at 3rd floor (not sure if the
Thanks in advance!!!

Actually I am using both APs as lightweight in 2nd floor.
How about this power level? where I can find those parameters ?
At 3rd floor all APs are autonomous, I accessed one of them and find this parameter
CCK Transmitter Power (dBm):           Max
OFDM Transmitter Power (dBm):           Max
Client Power (dBm):                     Max
is that the parameter you talked about ?
At WLC I found this screen
Tx Power Level Assignment Algorithm
Power Level Assignment Method
Automatic
On Demand
Fixed
                         1                         2                         3                         4                         5
Maximum Power Level Assignment (-10 to 30 dBm)
Minimum Power Level Assignment (-10 to 30 dBm)
Power Assignment Leader
Last Power Level Assignment
Power Threshold (-80 to -50 dBm)
Power Neighbor Count
Should I check anything else ?
Thanks in advance!!!

Re: IP Profile changed from 7Mbps down to 2Mbps

I am currently having this problem, could somebody please let me know who to get in touch with. Been emailing and on the phone for the last two weeks, done all that is asked of my new microfilters, tried another router now being asked is there any RF or EMI interference in the proprty that could effect my router. Must add i have never ever had an issue until now which it seams nobody is intrested.
Normal router Draytek
Modulation Set to: G.DMT
Mode: G.DMT Upseed: 448000 Downspeed: 288000 SNR Margin: 27 Loop Att: 33
Modulation Set to: ADSL2 (G.992.3)
Mode: ADSL2 (G.992.3) Upseed: 444937 Downspeed: 287777 SNR Margin: 6 Loop Att: 31
Modulation Set to: ADSL2+ (G.992.5)
Mode: ADSL2 (G.992.5) Upseed: 444937 Downspeed: 287777 SNR Margin: 6 Loop Att: 44
temporary Zoom router shows, switched to G.dmt to see if its stable as advised to try
ADSL Line State:
SHOWTIME
ADSL Modulation:
G.dmt
ADSL Annex Mode:
ANNEX_A
ADSL Startup Attempts:
9
Elapsed Time:
3 days 4 hours 8 minutes 15 seconds
Downstream Upstream
SNR Margin
25.6
26.0
dB
Line Attenuation
36.4
24.0
dB
Errored Seconds
74
27
Loss of Signal
8
8
Loss of Frame
0
0
CRC Errors
0
0
Data Rate
288
448
kbps
Latency
INTERLEAVED
INTERLEAVED

Hi Welcome to the forums
Here are some help pages done by CL Keith http://www.btinternet.com/~cbeddoe/speed/Speed.html
Can you also post the full results fromBT Speedtest speedtester.bt.com
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I accidentally for got to change from windows to mac on my purchase how do i change it

I purchased elements and did not select so it says windows how do i change it

http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Solution for "ACR Thumbnails changes from as shot".

Enclosed is a good explanation of the phenomena of the ACR thumbnail changing color, saturation, or whatever when you initially click on it. I believe his reference to the 4 auto check boxes is in edit/camera raw preferences.
http://www.luminous-landscape.com/tutorials/cr-auto.shtml

It sounds like you have altered the Camera Raw defaults or preferences.
All the develop settings in Camera Raw have starting values, which can be saved as defaults. You can change these settings and save them as new defaults. This is actually encouraged, as you might not like the Adobe defaults.
You do this by opening a new untouched raw file, making a few changes you wish to see in all future images, then click the little menu icon on the right of the develop panel and select Save New Camera Raw Defaults.
I just checked, and you can make White Balance adjustments permanent, just like any other setting.
On the same menu mentioned above, there is also another option 'Reset Camera Raw Defaults'. This will restore your develop settings to Adobe defaults.
Alternatively, open a new untouched raw file, set White Balance to 'As Shot', and select 'Save New Camera Raw Defaults'. This way, you only change one setting.

Is there a perminent fix for type size changes from page to page. Type is sometime to small to read.

This problem does not exist in Internet Explorer or in Chrome, so the problem appears to be in Firefox. I see work a rounds in these forums, but nothing that corrects the problem that seems to exist in Firefox. This problem started with one of the Firefox upgrades. Is there a permanent fix in our future.

You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Points for my Profile changed from thousand to Zero

Similar Messages

Maybe you are looking for