Points system not working

Dear Forum Moderator / Concerned Persons,
The Points system is not working.
Kindly arrange to make it active.
Regards,
Amit Mittal.

Hi,
1. Thanks Detlev Beutner
   for solving and prompt action.
2. Thanks Raja and Rich
   for advising me to mail.
   (The reply was quick from sdn)
Regards,
amit m.

Similar Messages

Break Point is not working on Web UI

Hi guys,
i have a problem with Break Points in combination with the Web UI:
After setting a Break Point in a Function Modul or Method and starting and working with the Web UI the Break Point will not reached. So the Debugger does not open. When i activate the Debugging with the Transaction Code SICF the Break Point is working normaly and the Debugger opens. But ater 30 min the Break Point will not work again. After activating the Debugger over SICF again very thing is ok. Thus i have to activate the Debugger with SICF 10 times per day.
Could somebody tell me how to fix this Problem? I would like to activate Debugging permanently.
Thank you very much. And i am sorry for my bad english ^^ I hope you understand my problem. Don't hesitate to ask for a better understanding. If you like to do it, don't hesitate to correct my gramma and spelling xD, because i need better english skills.

Hi,
Try this..
Activate breakpoints for http debugging..go inside component workbench trxn for any bsp component.. And select activate from the menu option debugging.. This will activate http breakpoints and it will stop in get/setter etc.
i believe this is required to do only once when you login to the system..
Hope this helps..
Cheers,
Sumit Mittal

I am using laptop hitting and slow system not working

i am using laptop hitting and slow system not working and very late opan file browser every think . plez help me

Hi,
Shut down the notebook. Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Note: If the option to run these tests is not available in the Bios Menu, use the f2 diagnostic menu instead.
Can you also post back with the following details.
1. The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Mouse pointer is not working correctly

I have a MacBook Pro and the pointer is not working correctly. It does not work smoothly and it is hard to get it to go where I need it to go.

Hello billm46,
Welcome to the Apple Support Communities!
It sounds like the trackpad on your MacBook Pro is displaying jumpy behavior. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
Trackpad or Magic Trackpad is jumpy or erratic - Apple Support
Have a great day,
Joe

I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

ladislavfromcygnet wrote:
Thank you Shootist007. I cannot do even Update now. I probably should have spent the same amount of money on a new IMac!
No not really. If this is a brand new Macbook Pro take it back for a refund. Apple has a 14 day No Questions Asked return policy for Full refund.
Take it back, get the Full Refund (DO NOT LET THEM TRY TO FIX IT. YOU BOUGHT A NEW COMPUTER NOT ONE THAT HAS BEEN WORKED ON OR NEEDS TO BE FIXED) and then decide whether to buy another Macbook Pro or the iMac. Or you could return it, get the Full refund and buy some other brand computer.

Why Vanishing Point is not working in PS CS3 as it was showing in the tutorial Disk?

Vanishing Point is not working in PS CS3. I was trying 10s of time or may be I am not working right. But whatever it says and showing in the Tutorial Vedio, not happening that easy. Or it does not cover in the Photoshop CS3. Because that's the way its look like now. does anybody know how can we make it work possible?
Thank You.
jeevan.

Here is a copy of my expressions and a copy of my data. The expressions match up going from left to right
Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4"))
sum(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
count(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
PUBLIC SHARED FUNCTION CalcPTD2(LookupArray AS OBJECT) AS INTEGER
     DIM i,Total AS INTEGER
     Total = 0
     FOR i = 0 to UBOUND(LookupArray)
           Total = Total + CINT(LookupArray(i))
     NEXT i
NumberTimes =   NumberTimes +1
RETURN Total
END FUNCTION

Windows 8 laptop cooling system not working anymore

This morning when I turned on my laptop it said that my cooling system is not working property and I need to turn it off right away . I got my laptop from Best Buy and it's a Satellite C855D-S5104 . How much does it cost to get it replaced? I'm using my iPad to write this by the way. And I wanted my whole laptop like just restart just swipe everything on it and yeah. How much does that cost too?

If its just the regular cooling system then probably its just 10-20 but if its intact w/ the MOBO then roughly its gonna give 50$ or higher i dont know w/ the labors and repair
(Everyone was new at one point)
You wanna say thanks ?? click the white star on the right side >>>

Why isn`t the Apple Store Genius reservation system not working?

Hello the apple store genius reservation system on Apple website is not working for Turkey.

How would we know? These are user to user forum. We don't work for Apple

Three Point Edit not working correctly :(

Hi there,
first of all I'd like to say thank you Adobe for listening to your users. And I hope this one gets noticed right away....:
It appears that 3 point editing ist not working correctly.
Right now I'm editing a video and I heavily rely on 3 point editing.
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Coming from tape workflows I really don't like clicking clip after clip...I need to edit
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
As soon as I want to use my source sequence with its individual tracks and hit (.) or (,) just nothing happens. Hmpf!
Come on guys, that is essential editing stuff, not fancy speech detection blabla...sorry but this is mega-annoying right now....
It says "Pro" right after "Premiere". So please make it pro! Professionals need ROCK SOLID essential functions.
Make us editors happy having switched from Avid/FCP etc.
Make essential stuff rock solid. That's what makes an app "pro".
Cheers and please mind my harsh words. Just a little upset right now. (I know that's not pro either )

bmfm_ wrote:
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
Hi bmfm,
I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
Thanks,
Kevin

Sound system not working,

can not talk on skype, sound system not working

Maybe you have the same problem as me, you just turned on your PC and audio didint worked?
Maybe try checking your volume settings, maybe you accidently muted it.
(My original post http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/My-sound-doesn-t-work/m-p/1688717 )

Hi 9 POINT CALIBRATION NOT WORKING IN VISION BUILDER

I try to do 9 point calibration by using run labview method in Vision builder .
here i tried teo labview files here Reference 1-1.vi working (it gives in mm) (here i am not assigning 9 points )
Reference 1-11.vi file i did invidual points to so that i can enter directly 9 point and real world ..
but its not working .
Is there anyway to 9 point calibraiton in vision builder .
if i have to use run labview step means .. please give me vi file to to enter 9 points (from set variable )
Attachments:
Reference_Points1-1.vi ‏12 KB
Reference_Points1-11.vi ‏23 KB

I'm using Flash Builder 4.7 for a pure flash project (ie, no mxml) & all my graphics objects are in a swc that was exported from an FLA.
I've made some progress with that issue. If I explicitly assign the scale9Grid dimensions in the code, it seems to work:
obj.scale9Grid = new Rectangle(x,y,w,h)
...but having to do that is a real productivity killer. Would be nice to use the 9-slice guide setting in the FLA

Why is my ThinkPad track point scroller not working in Firefox 4?

Today as advised by you I have installed Firefox 4 on my ThinkPad Z60m laptop. Earlier with Firefox and all other application worked fine but now its not working on Firefox 4 yet working fine on MS IE and other applications. Please let me know soonest or else I being an avid user of the IBM track point will discontinue using Firefox altogether.

For me the solution given here worked on my Thinkpad T42 WinXP:
http://aslezak.com/thinkpad-trackpoint-scrolling-in-firefox
Open this file in Notepad:
C:\Program Files\Synaptics\SynTP\tp4table.dat
Find this line:
; Pass 1 rules (These rules run last)
Add the following lines above that:
; Firefox
*,*,firefox.exe,*,*,*,WheelStd,0,9
*,*,firefox.exe,*,*,MozillaWindowClass,WheelStd,0,9
*,*,firefox.exe,*,*,MozillaDropShadowWindowClass,WheelStd,0,9
*,*,firefox.exe,*,*,MozillaUIWindowClass,WheelStd,0,9
*,*,firefox.exe,*,*,*,WheelVkey,0,9
Save the file and restart the machine.

Inspire 5.1 5700 Digital system not working correctly

I have a Inspire 5.1 5700 Digital speaker system that has some issue's.
The front speakers are all that is working with center channel low volume , the Sub and Rear speakers are not working according to set-up in software , But Sub is working in games and with Music.
I had been using an MSI P67/ G43 MB onboard sound. Today I gave up and purchased a new sound card, an Audigy Rx. Installed the drivers, did the update for drivers. I was working w/ speaker set up and mic setup and I still have the same problem.
I am thinking there has been a change in the drivers or windows 7, that the controller does not recognize. I have checked all speakers and the are working.
I also am using the Optical output to the controller.

Originally Posted by RonReagan
ok, great, but how do I select the source, it only shows speakers w / out an option for optical or Dolby or DTS . also, selecting the Dolby or DTS on the controller doesn't seem to change other than tones that I have noticed.
Ok , I changed it to SPDIF and it only shows 2 channel @ Hz. in the test that pops up, only 2 front speakers are activated. In Arma 3 , it seems to have 5.1 sound again now.
I used to be able to set up and test the speakers and set the front / rear balance and fade thru the software. I am un able to do that an again, the source is not Optical but SPDIF.
So, what am I doing wrong here ??
and thank you for the quick response and help O))
Hi RonReagan,
SPDIF (Sony Philips Digital Interconnect Format) basically has 2 types of connection: Optical and Coaxial. In this case, you are using an Optical connection. Hence, it is known as SPDIF Optical.
It is correct that you received 2 audio channels during speaker test via an optical connection. An alternative way is to initiate the test through the Windows audio endpoint for SPDIF Out (optical Out).
At the Sound of the Windows Control Panel, configure SPDIF Out as the default device. Click on the Properties. At the Supported Formats tab, check the box for DTS Audio or Dolby Digital. Click on the Test button to initiate the speaker test. You should able to test for the rear speakers.
Cheers,
JL-CL

Tools related to anchor points are not working, can't add a point to paths or convert a point.

Having a lot of issues manipulating points on paths in Illustrator CC - this is a fundamental feature of creating vector graphics and it's very annoying I'm paying for this and it's just not working. Eating up a lot of my time simply because I can't select or convert or add the anchor.

bella,
Presuming we are not just talking about more or less hidden Anchor Points as in View>Show/Hide Edges/Bounding Box, you may try to start on the following list (5) seems unlikely in this case).
You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

ThinkVantage system not working

Hi.
I have problem with my Thinkvantage sytem. When the computer is started and i press blue boton before booting the lenovo system is not working. I can't see R&R software, however in Win xp R&R is working. I try update the thinkvantage system but still nothink. Also i'm not sure theat my winxp iso/files from this specjal partistion was deleted. What is the name of iso/catlaog/files with winxp on this partitions on yours laptops?
How can i fix this problem?
I have linux partition and i would like remove this os but i need also reemove lilo from mbr and reconfigure the bootloader but first i need fix thinkvantage system
Please help me

The ThinkVantage button works, if Lenovo ThinkVantage Toolbox has been installed but it has been cancelled.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Points system not working

Similar Messages

Maybe you are looking for