Pointsec or CP FDE installati​on vs. RandR

Dear gurus,
I own a T-500 (Vista Business 32 onboard). The laptop comes with system and ThinkVantage tools preinstalled, and the HDD is by default divided in two partitions - huge C: with a system and a small visible(!) S:, which contains system applications, including Rescue and Recovery tools.
In the company I work for, we want to implement disk encryption, namely Check Point Endpoint Security - Full Disk Encryption solution (short: FDE, formerly known as Pointsec PC). I have serious doubts regarding installation of FDE because of the S: partition. I asked Check Point support, but all they could say is:
You are unable to use the benefits of the recovery on encrypted drive, bacause if you boot up not from a Pointsec you are unable to get access to your data (including recovery partition).
The recomended way is to remove the recovery partition.
I wonder if anyone did a successfull installalation of FDE or previous Pointsec PC software on T-series laptop with R&R partition?
While searching in lenovo.com I found an article from 2005 regarding "Maintenance Patch for ThinkVantage Rescue and Recovery v3.00.0025 or v3.00.002"  (http://www-307.ibm.com/pc/support/site.wss/MIGR-62​558.html), and the summary of changes includes the following:
8. Bootmanager updates have been incorporated to make the Rescue and
Recovery application compatible with Pointsec software.
This information makes me guess that Pointsec PC integration with Rescue and Recovery is possible, moreover it will be possible to boot, enter Pointsec credentials and be able to recover the system from the backup.
The second lead is that Check Point issued an additional install file called "InstallRRU.msi", which is designed for IBM Rapid
Restore Ultra (RRU), and the release notes say:
After installing the InstallRRU.msi add-on package, you can access RRU
functionality.
To restore a backup via RRU, do not access RRU through Windows but
instead as described in the procedure below.
To access RRU functionality for restoring a backup:
1. Log on to the Full Disk Encryption preboot environment.
2. Immediately after you have logged on to Full Disk Encryption and
before Windows starts to load, press F11. This will boot the
machine into the RRU partition.
3. Select the backup you want to restore in RRU and continue.
 which also makes me belive, that at least the IBM machines can use recovery tools together with FDE/Pointsec.
  Any advise will be appreciated.
Grzegorz

Hi,
What is the volume of data you copied. Also have you followed the best practice of minimal/no activity in the source client.
The dictionary differences seems to be becuase of some SPs not applied in your ECP system yet
Regards,
Sanujit

Similar Messages

  • Want to use xrandr, but it says extension "RANDR" is missing

    hello!
    i have a problem and i don't know why, i think i have everything done to be able to use xrandr (nvidia-settings needs it). but i can't.
    that is my problem:
    $ xrandr
    Xlib: extension "RANDR" missing on display ":0.0".
    RandR extension is missing
    here is my xorg log:
    $ cat /var/log/Xorg.0.log | grep -i randr
    (**) Option "RandR" "on"
    (**) RandR enabled
    (II) Initializing built-in extension RANDR
    these are all errors:
    $ cat /var/log/Xorg.0.log | grep EE
    (EE) NVIDIA(1): Unable to find available Display Device for screen 1.
    this is my xorg.conf:
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder3) Mon Feb 26 23:39:38 PST 2007
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" LeftOf "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "touchpad" "CorePointer"
    InputDevice "usbmouse" "SendCoreEvents"
    # Option "AIGLX" "true"
    EndSection
    Section "Files"
    RgbPath "/usr/lib/X11/rgb"
    FontPath "/usr/share/fonts/misc/
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/CID/"
    FontPath "/usr/share/fonts/75dpi/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/local/"
    FontPath "/usr/share/fonts/Speedo/"
    FontPath "/usr/share/fonts/TrueType/"
    FontPath "/usr/share/fonts/freefont/"
    ModulePath "/usr/lib/xorg/modules"
    EndSection
    Section "Module"
    Load "dbe"
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx"
    Load "synaptics"
    Load "xtrap"
    EndSection
    Section "ServerFlags"
    Option "Xinerama" "1"
    Option "RandR" "on"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "touchpad"
    Driver "synaptics"
    Option "Protocol" "auto-dev"
    Option "Device" "/dev/input/mice"
    Option "SHMConfig" "on"
    Option "HorizScrollDelta" "0"
    EndSection
    Section "InputDevice"
    Identifier "usbmouse"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"
    Option "Buttons" "5"
    Option "ZAxisMapping" "4 5"
    Option "Resolution" "800"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "AUO"
    HorizSync 30.0 - 75.0
    VertRefresh 60.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: unknown, VertRefresh source: unknown
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "TV-0"
    HorizSync 0.0 - 0.0
    VertRefresh 0.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce Go 7300"
    BusID "PCI:1:0:0"
    Screen 0
    Option "RandRRotation" "true"
    EndSection
    Section "Device"
    Identifier "Videocard1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce Go 7300"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "metamodes" "DFP: 1280x800 +0+0; DFP: 1024x768 +0+0; DFP: 800x600 +0+0; DFP: 640x480 +0+0"
    SubSection "Display"
    Depth 24
    Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Videocard1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option "metamodes" "TV: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    can someone help me?
    package infos: nvidia(-suspend2 / -utils) 1.0.9755-1, newest xorg-packages, also libxrandr and randrproto.
    thank you for your help...
    mfg iggy

    no one, who can help me...

  • FDE will not encrypt disks

    Hi Everyone,
    I'm running a net-new ZCM 11.3 install and am having trouble with FDE.
    I have a simple FDE policy, configured without PBE enabled, associated to a single Win7 workstation. Current Novell Client and ZENworks Adaptive Agent are installed and all current Windows Updates have been applied.
    The drives will not encrypt though. When the policy is applied to the workstation it goes through all the motions and appears to be successful. FDE on the client though usually gets stuck at "Policy Being Applied" (even after the reboot forced by the policy) although will sometimes fall back to "No Policy Enforced" if I let it sit long enough.
    I've tried this with multiple workstations (though all built from the same image... this image encrypts fine on our old 11.2.4 ZCM), multiple versions of the policy, and even completely different policies.
    In each case, the following errors and warnings get logged on the client each time the policy is applied. I don't see any reference to these errors in the documentation...
    Has anyone seen this?
    Thanks,
    Ian
    Error:
    Full Message:
    Could not find a Handler associated with the following type: Full Disk Encryption Policy.
    Additional Information:
    None
    Severity: Error
    Date: April 8, 2014 10:22:47 AM
    Acknowledged Date: None
    Source: /Devices/Workstations/tor-ianp
    Message ID: ActionMan.HandlerNotFound
    Probable Cause URL: None
    Log ID: 2bf5842476f04b842475dcc454a6ce25
    Related Objects: None
    Error:
    Full Message:
    Could not find a Handler associated with the following type: Full Disk Encryption Policy.
    Additional Information:
    None
    Severity: Error
    Date: April 8, 2014 10:22:47 AM
    Acknowledged Date: None
    Source: /Devices/Workstations/tor-ianp
    Message ID: ActionMan.HandlerNotFound
    Probable Cause URL: None
    Log ID: 6cc2b17e5a1776386db7ac9580fa8b89
    Related Objects: None
    Warning:
    Full Message:
    The action Full Disk Encryption Policy (ID:Full Disk Encryption Policy) failed due to the reason : Could not find a Handler associated with the following type: Full Disk Encryption Policy., however the action is set to continue on failure.
    Additional Information:
    None
    Severity: Warning
    Date: April 8, 2014 10:22:47 AM
    Acknowledged Date: None
    Source: /Devices/Workstations/tor-ianp
    Message ID: ActionMan.ActionContinueOnFailure
    Probable Cause URL: None
    Log ID: 0fed43d717b6ad0d50f0e85b516a8308
    Related Objects: None
    Warning:
    Full Message:
    The handler [NULL] was not found.
    Additional Information:
    None
    Severity: Warning
    Date: April 8, 2014 10:22:47 AM
    Acknowledged Date: None
    Source: /Devices/Workstations/tor-ianp
    Message ID: ActionMan.ExeHandlerNotFound
    Probable Cause URL: None
    Log ID: 0eb0a5dc9637602f4367fa5c8fa7aabf
    Related Objects: /Policies/Win7/Staff Encryption (No PBE)
    Warning:
    Full Message:
    Could not find a Handler associated with the following type: Full Disk Encryption Policy.
    Additional Information:
    None
    Severity: Warning
    Date: April 8, 2014 10:22:47 AM
    Acknowledged Date: None
    Source: /Devices/Workstations/tor-ianp
    Message ID: ActionMan.HandlerNotFound
    Probable Cause URL: None
    Log ID: a87d1a6e792b3fd8d298f891edf84083
    Related Objects: /Policies/Win7/Staff Encryption (No PBE)
    Warning:
    Full Message:
    The action Full Disk Encryption Policy (ID:Full Disk Encryption Policy) failed due to the reason : Could not find a Handler associated with the following type: Full Disk Encryption Policy., however the action is set to continue on failure.
    Additional Information:
    None
    Severity: Warning
    Date: April 8, 2014 10:22:47 AM
    Acknowledged Date: None
    Source: /Devices/Workstations/tor-ianp
    Message ID: ActionMan.ActionContinueOnFailure
    Probable Cause URL: None
    Log ID: de434906afb9fdb4b33dc65ffb6aabdb
    Related Objects: None
    Warning:
    Full Message:
    Could not find a Handler associated with the following type: Full Disk Encryption Policy.
    Additional Information:
    None
    Severity: Warning
    Date: April 8, 2014 10:22:47 AM
    Acknowledged Date: None
    Source: /Devices/Workstations/tor-ianp
    Message ID: ActionMan.HandlerNotFound
    Probable Cause URL: None
    Log ID: be711a0108c144bee714d6576872657d
    Related Objects: None
    Warning:
    Full Message:
    The handler [NULL] was not found.
    Additional Information:
    None
    Severity: Warning
    Date: April 8, 2014 10:22:47 AM
    Acknowledged Date: None
    Source: /Devices/Workstations/tor-ianp
    Message ID: ActionMan.ExeHandlerNotFound
    Probable Cause URL: None
    Log ID: 4b8a73ef1677139ac9208ead88941767
    Related Objects: None

    Originally Posted by chalmerst
    zzzzzzzzzzzzzzzzzzzz
    On my virtual machines, it is enabling fine. On physical hardware, we am seeing the same issue. It starts when first applying policy with an event viewer message stating
    Code:
    Faulting application name: PBAInit.EXE, version: 9.7.3.1, time stamp: 0x53a1b6eb
    Faulting module name: PBAInit.EXE, version: 9.7.3.1, time stamp: 0x53a1b6eb
    Exception code: 0xc0000005
    Fault offset: 0x00000000001ea01d
    Faulting process id: 0x1b78
    Faulting application start time: 0x01d08126d284cb5d
    Faulting application path: C:\Windows\NAC\SBS\PBAInit.EXE
    Faulting module path: C:\Windows\NAC\SBS\PBAInit.EXE
    Report Id: 36feb7d3-ed1a-11e4-9dc7-8019348456dd
    After this reboot, we are seeing the same "Could not find a Handler associated with the following type: Full Disk Encryption Policy" message.

  • Robohelp 9 and PointSec Security

    Recently PointSec was installed on my computer at work. After its installation, I opened one of our largest projects that is using the resource manager to link images and snippets. There are about 400 images and nearly 1000 snippets in the project. Prior to the installation, Robohelp would sync this project in about 3-4 minutes. After the installation, I tried to sync the project with the resource manager and it would not sync. It sat for nearly 30 minutes, and then Robohelp crashed.
    Has anyone else encountered a problem where Robohelp didn't sync the project? I tried re-installing Robohelp, but that didn't work. I even got a new computer (has PointSec installed), but it also refuses to sync. Any suggestions?
    Thanks.

    Aside from the shared content not syncing, are there any other operational issues?
    Is the project on your local C drive?
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Support for the momentus FDE.2

    I have been browsing the Mac forums and I must say that I am somewhat displeased with the support from Apple. It should not be so hard to find an answer to the simple question as to which harddrives are supported. I am guessing that I am not alone in woundering this. So I am hoping that some of you might know the answer to my question.
    I have a MacBook late 2007 which has a fairly small harddrive. I am thinking about installing windows with VMW Fusion and would need a bigger harddrive. I have been looking at the Seagate Momentus series.
    Now to the hard part. The drive I'm interested in is the Momentus 5400 FDE.2 but nowhere can I find an answer to the question of wether the MacBook will support the encryption and password feature of the FDE.2 line of drives. Does anyone here know if this is supported by the MacBook?
    It would be nice to add the extra security of encrypting the drive of the computer I am carying around everywhere.

    Well, the problem is that Seagate can't answer wether or not the Apple EFI will support the security commands available in the SATA protocol. Since this is a strictly Mac question I am posting this question in the Mac support forums.
    The encryption of the Momentus drives is strictly a firmware issue in the drive itself. There is no software exectution nessesary on the cpu once the drive has been unlocked and thus no overhead or performance loss for the added security. The security features are handled using the SATA securty commands available in the SATA protocol.
    There is also a propriatary Seagate security protocol which can be used by third party applications but that is not what I am interested in.
    Usually these security features are handled by the system BIOS of PCs where the BIOS startup password will also unlock the drive using the SATA security commands. So the question is wether or not the firmware password of the macs will also unlock the drive using SATA security commands. Which as I wrote in the beginning is strictly a Mac EFI question.
    So anyone got any good ideas?

  • I can not uninstall the newest Muse, the error that i get is: ERROR: The older version of Adobe Muse CC 2014 cannot be removed.  Contact your technical support group.    ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installat

    Can somebody please help me, i can not work on my websites anymore. Thanks !!

    ERROR: The older version of Adobe Muse CC 2014 cannot be removed.  Contact your technical support group. 
    ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installatie.
    MSI Error message: The older version of Adobe Muse CC 2014 cannot be removed.  Contact your technical support group. 
    ERROR: Third party payload installer Muse_2014_2_CC_LS24.msi failed with exit code: 1603

  • How do I resolve X11 ""RANDR" missing on display "localhost:10.0"" for OX 10.6.7 error?

    Typically this error ( "RANDR" missing on display "localhost:10.0") doesn't cause any problems but it is annoying.
    Is there a solution for this?

    Thanks for the suggestions guys, but I found the issue.
    I searched the Apple support docs for "X11" and ran across this article:
    http://docs.info.apple.com/article.html?artnum=302349
    Using "ssh -Y root@hostname" indeed fixed the issue.
    Normally, I have "ForwardX11 yes" in my /etc/ssh_config and I don't use "-X" on the command line.
    So, per OpenSSH's FAQ, I added "ForwardX11Trusted yes" underneath the above config statement and I can again use just "ssh root@hostname" without a -Y.
    I'm marking this as answered.

  • Symantec Endpoint Protection and FDE

    Hey Guys,
    We have SEP 12.5 installed on all our base images.
    I've found that when trying to enforce an encrytpion policy SEP blocks part of it (so it doesn't do the rebranding, user capture or pass on the admin password) which means when the Encrytion screen loads, there is no domain information and you can't get past that point (effectivley its bricked and has to be re-imaged).
    If I uninstall SEP before enforcing the policy, the encryption works fine, but as I said earlier we have it on all our base images. Also we are just about to replace our current encryption with ZENworks FDE and we have a project to re-encrypt about 200 laptops over the Christmas period, with it as it is we would have to uninstall SEP from all these devices.
    Has anyone got SEP to work properly with FDE? Is there anything I can do to avoid uninstalling SEP from every device?
    Thanks

    Originally Posted by Cptdave
    Hey Guys,
    We have SEP 12.5 installed on all our base images.
    I've found that when trying to enforce an encrytpion policy SEP blocks part of it (so it doesn't do the rebranding, user capture or pass on the admin password) which means when the Encrytion screen loads, there is no domain information and you can't get past that point (effectivley its bricked and has to be re-imaged).
    If I uninstall SEP before enforcing the policy, the encryption works fine, but as I said earlier we have it on all our base images. Also we are just about to replace our current encryption with ZENworks FDE and we have a project to re-encrypt about 200 laptops over the Christmas period, with it as it is we would have to uninstall SEP from all these devices.
    Has anyone got SEP to work properly with FDE? Is there anything I can do to avoid uninstalling SEP from every device?
    Thanks
    Hi,
    are you aware of the ZENworks Recommended Antivirus Exclusions?
    https://www.novell.com/support/kb/doc.php?id=7007545
    Kind Regards
    Sebastian

  • Does Mac osx 10.8.2 support FDE SSD drive on early 2011 MBP?

    Hi mates,
    I need to secure all my datas in my MBP i5 early 2011 model. Thinking of changing the harddisk to a new Samsung 840 Pro series that come with the FDE feature. Will I be able to use the FDE feature on the SSD that comes along?
    Thanks!

    look here:
    https://discussions.apple.com/message/22835243#22835243

  • Winmagic Securedoc and New Macbook Pro for Full Disk Encryption (FDE)

    Hi, I wonder if anyone had any experience with this. I've installed a seagate Momentus FDE drive (...421 series) on my new macbook pro and tried installing Winmagic securedoc to manage full disk encryption. It seems that despite all their recommendations re: hibernatemode and lidwake and sleep vs hibernation, the MBP crashes when I close the lid and then awaken it (by opening and pressing the power button). It cannot be awakened via an external keyboard either. Note that both hibernate and sleep work fine without securedoc. As securedoc appears to be the only viable FDE solution, I'd really like to get it working. Has anyone had any luck getting it to work with the new MBPs?

    PGP is another alternative as I have used it for the past few years on all of my Macbook Pros. I also own SecureDoc but have not installed it on the new Macbook yet.
    I do know that PGP disables hibernate during the install as it can cause problems.

  • Photoshop cc installeren na nieuwe installatie windows 7

    Ik moet mijn harde schijf vervangen voor mijn computer met windows 7,  64 bits versie.
    Ik moet daarna dus windows 7 opnieuw installeren op mijn nieuwe harde schijf.
    Hoe zet ik mijn photoshop cc lidmaatschap van € 12,29 per maand over op de nieuwe installatie van windows 7.
    vriendelijker groeten Hennie

    Ok, i found this:
    1)
    Pakiet błędów 3032890119, typ 1
    Nazwa zdarzenia: APPCRASH
    Odpowiedź: Niedostępny
    Identyfikator pliku Cab: 0
    Sygnatura problemu:
    P1: Photoshop.exe
    P2: 10.0.0.0
    P3: 4601eae8
    P4: ntdll.dll
    P5: 6.1.7601.17725
    P6: 4ec49b8f
    P7: c00000fd
    P8: 00020023
    P9:
    P10:
    Dołączone pliki:
    C:\Users\Halva\AppData\Local\Temp\WERF73A.tmp.WERInternalMetadata.xml
    Te pliki mogą być dostępne tutaj:
    C:\Users\Halva\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Photoshop.exe_1e dc4194c7a715e8ded38b2b42e5a2617ae647_16e840b8
    Symbol analizy:
    Ponowne sprawdzanie rozwiązania: 0
    Identyfikator raportu: 3c3dc900-ab4c-11e3-84a5-446d57b01bdc
    2)
    Nazwa aplikacji powodującej błąd: Photoshop.exe, wersja: 10.0.0.0, sygnatura czasowa: 0x4601eae8
    Nazwa modułu powodującego błąd: ntdll.dll, wersja: 6.1.7601.17725, sygnatura czasowa: 0x4ec49b8f
    Kod wyjątku: 0xc00000fd
    Przesunięcie błędu: 0x00020023
    Identyfikator procesu powodującego błąd: 0x27b4
    Godzina uruchomienia aplikacji powodującej błąd: 0x01cf3f58f79fe380
    Ścieżka aplikacji powodującej błąd: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
    Ścieżka modułu powodującego błąd: C:\Windows\SysWOW64\ntdll.dll
    Identyfikator raportu: 3c3dc900-ab4c-11e3-84a5-446d57b01bdc
    3)
    Nazwa aplikacji powodującej błąd: Photoshop.exe, wersja: 10.0.0.0, sygnatura czasowa: 0x4601eae8
    Nazwa modułu powodującego błąd: KERNELBASE.dll, wersja: 6.1.7601.17651, sygnatura czasowa: 0x4e211319
    Kod wyjątku: 0xc00000fd
    Przesunięcie błędu: 0x0000e4a0
    Identyfikator procesu powodującego błąd: 0x2260
    Godzina uruchomienia aplikacji powodującej błąd: 0x01cf3e00f5abe39b
    Ścieżka aplikacji powodującej błąd: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
    Ścieżka modułu powodującego błąd: C:\Windows\syswow64\KERNELBASE.dll
    Identyfikator raportu: e589cadb-aa9e-11e3-9836-446d57b01bdc

  • Can 250GB FDE 7200 be installed on my X60s?

    I can't seem to find an answer to this simple question and I found conflicting pieces of information on the official Lenovo product pages.  Any help would be highly appreciated
    The question is: Can I install the 250GB FDE 7200rpm SATA HD (Lenono Thinkpad's part number 43N3410) on my X60s, Win XP (SP3), model 1704-5LG, which is still running on the original 80GB 5400rpm HD?
    Thanks in advance!

    ajkula66 - many thanks!  I have been reading the forum for long time and have always been able to find the answers before I had to post a question... it is really a great forum!  Thnaks for the good work.
    Regarding your answer, I understand that it would work just fine, but still my concern is that the FDE functionality will not be operational because of the information I read at:
    1) http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-69621
    Where it says in the middle of the page:
    "Which ThinkPad notebooks can use FDE drives?
    Any ThinkPad notebook that uses Serial ATA (SATA) hard drives can use an FDE drive; however, the FDE menu enable utility is currently only supported on ThinkPad T61/T61p, R61, X61/X61p and ThinkPad Reserve Edition notebooks."
    2) http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-68776
    Where it is alsosuggested that the larger size HD (200GB in this case) is not supported on X60s.
    I am looking to upgrade from my origianl HD to the 250GB FDE 7200rpm, but if the FDE functionality (the added security) is not going to work on my X60s, so then I am better off buying a larger HD without FDE for the same price.
    Again, apologise for being so "slow" but perhaps I am missing something here.  I clearly could not find anyone saying "yes the FDE functionality would work on X60s".
    Any comment would be appreciated.
    Thanks again!
    So in summary, the precise question is - will the FDE functionality of the  

  • My Lightroom 5.6 versie is defect, I have a serienumber. Can you help my fot installatie

    My Lightroom 5.6 versie is defect, I have a serienumber. Can you help my for installatie?
    Henk

    Forgot to Mention i'm using Windows 8.1 - 32 GB Ram - i7-3970x - 2 SSd's in raid 0 for C Drive/ Storage drive is three ( 2 tb HDD in a raid 0 ) / Pictures Folder defaults to the Storage Drive not the Application drive .

  • Kan, na installatie van Creative Cloud, Illustrator niet opstarten. Photohop, enz... starten wel op.

    Kan, na installatie van Creative Cloud, Illustrator niet opstarten. Photohop, enz... starten wel op.

    Kriske00 did you receive any error messages during the installation process?

  • Bij de eerste twee regels van de voorvertoning in het mailprogramma valt het onderste gedeelte weg!? Wie kan mij helpen? Na installatie Lion

    Na installatie van Lion valt bij de nieuwe instelling een gedeelte van de eerste twee regels weg (de onderkant), bij de voorvertoning in het mailprogramma.
    Wie kan mij helpen dit te corrigeren?
    Opnieuw installeren lukt niet.
    mvg. Pim

Maybe you are looking for