Polaroid Pdc 3035 worked in iphoto 4 doesn't show up in 5.

I could import photos from my camera in panther but since upgrade to tiger my camera doesn't show up anywhere when I plug it in. Can someone help with this issue? Polaroid says it works with 10.

I figured it out by playing with the camera while it was plugged into the computer.

Similar Messages

  • IPhoto app doesn't show any photos from my photos app

    I just upgraded my new iPad to iOS 6 beta. Maybe that's the problem but suddenly my iPhoto app doesn't show any photos at all. All the tabs (albums, photos, events, etc) are empty.  When I open the app it says "updating photo library" briefly, but that's it. I tried rebooting, deleting the app and reinstalling it, basically everything I could.  Is this a known iOs6 bug?

    Ok, I have the release and I have the issue, photos are just boxes w no pictures, is there a way to remove library and reload? The photo app works fine and all pictures are there.

  • IPhoto 11 doesn't show the photos that I just imported from an SD card, but says its importing to library 15 min after SD card is removed.

    iPhoto 11 doesn't show the photos that I just imported from an SD card, but says its importing to library 15 min after SD card is removed. The import seemed to start normally, I went to mail to check messages, came back to iPhoto & the usual prompt about wanting to delete the photos on the card never came up. The photos didn't show up in events or the library & the device icon wasn't showing so I tried to import again. A prompt then came up saying that I needed to wait until the import was done!

    Hi, this problem is also happening to me also. I just took some pics of my daughter on my nikon d3100 and imported them from SD card to iPhoto. It says 'preparing to import' but during the process i do not see the photos being imported. After it was done, there was a new event album, i clicked opend it to see my photos but all of them were blank. I forced quit and re-launched iPhoto but it didnt work, i even re-imported, not to no avail.. Please help.  Earlly 2011 13' MacBook pro 10.7.2

  • My iPhone 4S is picked up by both itunes and iphoto but doesn't show up in Finder

    My iPhone 4S is picked up by both itunes and iphoto but doesn't show up in Finder and I can't get it to sync with iCal.  Any ideas?  I've had trouble in the past with cameras and other devices not showing up in Finder and I don't know what is wrong!  I have a Mac OS X 10.5.8 which is quite old but this is its main problem...
    Thanks!

    The sync is 2 way. If you created items in the calendar on the phone, however, BEFORE you set up the sync relationship, those items are stored in the calendar on the phone only.
    Go into the calendar and tap the "Calendars" button in the upper left. You will see lists of all the calendars. On my iPhone are those that live exclusively on the phone. You will also see From My Mac (or something similar) as well as any that are synced with Exchange accounts, iCloud, etc.
    Now go to Settings>Mail, Contacts, Calendars. Scroll down to Calendars and make sure the Default Calendar is set to the correct calendar.  I don't believe there is any easy way to move all your entries from the local calendar to the one that syncs with iCal, but you can go into each entry and specify which calendar it belongs to.

  • HT5085 I'm very irratated. First my iTunes app wouldn't open, it had some bug in it, so I backed up my phone on my computer, then tried to open iTunes app through Shazam, which seemed to work. NOW, iRadio doesn't show up at all. I don't have the little ic

    My iRadio doesn't show up. It isn't there at all.

    Depending on what kind of computer you have, you're gonna need to put that backup in the appropriate folder or itunes is not gonna be able to see it for you to use.

  • Added photo to iphoto but doesn't show up in media browser?

    I have added some photos to an event in iphoto...then they do not show in media browser in pages...any clue why...has worked quite a few times before

    The sync is 2 way. If you created items in the calendar on the phone, however, BEFORE you set up the sync relationship, those items are stored in the calendar on the phone only.
    Go into the calendar and tap the "Calendars" button in the upper left. You will see lists of all the calendars. On my iPhone are those that live exclusively on the phone. You will also see From My Mac (or something similar) as well as any that are synced with Exchange accounts, iCloud, etc.
    Now go to Settings>Mail, Contacts, Calendars. Scroll down to Calendars and make sure the Default Calendar is set to the correct calendar.  I don't believe there is any easy way to move all your entries from the local calendar to the one that syncs with iCal, but you can go into each entry and specify which calendar it belongs to.

  • Install question- blur tool not working and guided option doesn't show a menu

    I bought and dowloaded PSE11.  However, I don't think I disabled my virusware.  It took an especially long time to download and I don't know if it downloaded correctly.  My blur tool does not work and my "guided" options are not there.  What is the easiest fix- unistall and remove the serial number then reistall using same serial number?  My question with this is- how many times can I do this, and or is there an easier fix?  I have PSE11 and LR4 and I am going back and forth between which one to use.  I really need all the options to work from PSE11.  I am not a great IT person so I need the answer in basic easy language to understand please:-)
    Thanks

    The blur tool doesn't do much under the best of circumstances, so it may be working and just not making enough of a difference to see. However, for the problem with guided edit, reinstalling is probably the easiest solution at this point. Activation is tied to your hardware so you don't need to deactivate PSE if you don't want to, but it won't hurt to deactivate it. There is a limit, but for reinstalls on the same machine it's unlikely you'd ever get there, and if by some chance you did, you just contact activation support to reset things.

  • IPhoto '09 doesn't show all photos in Event

    I"m sure this must be simple, but I don't use iPhoto a lot.  Here's the problem.  In one of my Events I've got about 150 Photos; however, when I want to sync it with my iPad or Mobile Me Gallery it only shows 3 of the Photos.  I can't figure out what the issue is.

    Put a test photo on the desktop and import from there.  Then delete it from the desktop and try to enlarge the photo in iPhoto.  If it enlarges OK the library is good.  If you get the exclamation point the library is damaged. If that's the case try the following: make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
    Fix #1
    1 - delete  the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder. 
    2 - delete iPhoto's cache file, Cache.db, that is located in your Home/Library/Caches/com.apple.iPhoto folder. 
    3 - reboot, launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key.  You'll also have to reset the iPhoto's various preferences.
    Fix #2
    Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
    Select the options identified in the screenshot and the option to rebuild the small thumbnails.
    Click to view full size

  • Simulated device in MAX, self tests without error and has working Test Panels, but doesn't show up in DAQ assistant.

    I'm trying to create a development machine where we can test new code without using our physical hardware. I've followed this guide in setting up a simulated device. I can get to step 3.2b, but the device does not show up in the DAQ assistant. In MAX, the device self tests and self calibrates successfully, and when I open the test panels, I see some sort of signal. I assume this is a default simulated input since I haven't told the device to look for anything? Note that the two devices I'm trying to create show up in the Devices and Interfaces section, but that even after running Self-Calibrate, the Self-Calibration date is still unspecified.
    When I try to test the device and create a voltage input according to the guide, I am unable to see either device in the DAQ task creator.
    Steps 1 and 2 of this guide are obviously satisfied. Step 3 is not, but this is unsurprising since a simulated device wouldn't be found in the Device Manager anyways. Also, I am not running RT, so step 4 is satisfied.
    Does anyone have any ideas?
    Solved!
    Go to Solution.

    That would be because the PXI 5124 is a digitizer not a analog input device.  You need to use the NI SCOPE driver not NI DAQmx
    Jeff

  • IPhoto 11 doesn't show places but still shows gps data

    I have some photos that don't show up in places. If I do a slideshow and uses the places theme, it shows them in the correct location. Any idea why it is doing this?
    Another odd thing is if I highlight all events, 377 events, 1500 photos and do a slideshow with the places theme it only shows two places and I have quite a few more than that listed. Why is it doing this? Thanks.

    I just noticed this with a different photo. They were definantly not in the same place, the first set was in california, the second was in arkansas. It shows the location for both just a little to the right, and up from Cupertino. I just did an extra 16 that don't have places set, and all of them show the same place in Cupertino. iPlaces is a revolutionary new feature?

  • IPhoto pictures does not show up when trying to change desktop pictures

    When I got my new MBP I used a Time Machine back up to restore my system. This has worked great, though so far there is one little issue:
    When I right click my desktop and choose "Change background picture" my iPhoto images doesn't show up in the menu like they used to.
    Has anyone got any idea about how to get them back in there? Do I somehow have to "let Leopard know" that I have an iPhoto library that I would like to be able to choose from?
    Thanks!

    HI Rune,
    That is most likely a shared library issue. The Finder is trying to access your iPhoto library without iPhoto being open. Sometimes when libraries are shared, they can become corrupt.
    Go here and read about shared library issues.
    http://www.thexlab.com/faqs/sharedlibraryerrors.html#Anchor-Resolving-35326
    The easiest way to fix this is to back up your important data and do an Archive and Install which restores your system software. It does NOT erase the drive, you do not have to reinstall any Apple pre-installed software, ie., iLife applications.
    Go here and read the instructions for archive and install.
    http://support.apple.com/kb/HT1544
    Carolyn

  • After signing in successfully can't open calendar and integrated gmail doesn't show my mail and calendar

    Three issues that occur after successful sign in:
    1. Can't open calendar or any other gmail option, I get a message saying: Firefox prevented this page from automatically redirecting to another page.
    2. Can't set appropriate signature in the settings signature box. When I try to save it say "Sorry, the signature [email protected] is too long. Please try a shorter signature." This is my email address and I want it as part of my automated signature that I placed in the appropriate settings box.
    3. I loaded the integrated gmail add on (may be called an extension) and it doesn't work. My calendar doesn't show up when I sign into mail. It used to work beautifully and was very helpful. I believe I'm on the latest version of Firefox. What can I do? I have three (3) other gmail accounts and have these same issue with all of them.
    *** Sorry, but I need these issues resolved immediately as I use gmail for my two businesses and personal account. ***

    (1) You get the infobar from Firefox saying that the site wants to redirect you? You can turn that off here:
    orange Firefox button ''or'' classic Tools menu > Options > Advanced > General
    Un-check the box for "Warn me when websites try to redirect or reload the page"
    More generally, when you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove your google.com cookies (save any pending work first) using either of these:
    * While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?
    (2) I'd have to log in and see what this feature is
    (3) Could you provide a link to that particular extension over on the add-ons site, or it exact name?

  • Original iPhone doesn't show up in iTunes 9.2 for Mac

    My iPhone no longer shows up in iTunes. Do I need to upgrade or uninstall something?
    iTunes: 9.2
    iPhone Version 3.1.2 (7D11) Model: MB384LL
    OS: 10.5.8

    Same here. Brand new 3GS running 3.1.3. Activated with iTunes 9.1 on Mac, updated iTunes to 9.2, Software Update was unable to complete "Registering updated system components". iTunes 9.2 works properly, besides it doesn't show my iPhone.

  • Why does my volume buttons doesn't show when the Ipad is locked, Why does my volume buttons doesn't show when the Ipad is locked

    The volume buttons doesn't work when my ipad is locked but before the did worked I wanna know why they stoy working so suddenly

    So it doesn't show when I turn down or up my volume when it's locked?
    I'm checking my iPod and is also like this when it Locke it doesn't show when I'm turning it down or up

  • Zoom in-out and rotation in trackpad doesn't work in iPhoto and Aperture. Any solution?

    Zoom in-out and rotation in trackpad doesn't work in iPhoto and Aperture. Any solution?

    Sound like a trackpad problem and not an iPhoto one.  Have you asked in the forum dedicated to the Mac model you're using or is this an add on trackpad?
    OT

Maybe you are looking for

  • How do i stop pop-ups from appearing on mac?

    I tried watching some movies online the other day and I don't know exactly what I pressed but ever since ads are appearing on safari and I don't know how to stop it. I tried downloading ad blocker but theres so many and I would have to block every si

  • How to update UDF from marketing documents to Journal Entry UDF

    Hi Experts, I have a UDF in the marketing documents and I want to save the value to Journal Entry UDF. Regards, Jummie

  • Feh Not setting background image[SOLVED]

    I don't know what is going on but feh absolutely refuses to set the bg image on x starting up.  I can set it manually just fine but it will not reset it on xstart.  Here is my .xinitrc: \#!/bin/sh # ~/.xinitrc # Executed by startx (run your window ma

  • Olympus OM-D EM-5 raw format

    Hi, I use an Olympus OM-D EM-5 and would like to know if there's a way to have ACR ignore the format selected in-camera (in my case 3x2) and display the full 4x3 image, which is the format in which the .ORF raw file is always saved. This operation is

  • LR 5 CC Installation problem (7)

    Hi, since the last CC Update it works for me to choose the installation folder and it works finally to install to a different location than C: But - after uninstalling the LR 5 and trying to install it to my location F: I always get the error: Errors