Policy issues win xp sp2 and zfd ir6

Hi, I have been having this issue for about 4 days. In our school
environment we push a very restrictive policy out to the desktop, and
also apply printers during the login process. About Tuesday afternoon, I
noticed that some labs were not receiving their printer assignments, and
then I noticed that students were gaining access to areas that were
supposed to be restricted to them (C:\ and all it's contents for one).
I have run DSRepair to rebuild the schema, rebuild the operational
database, and perform global repairs, but this has had no effect. I have
recreated the policy for the students and applied it to a test user, but
again, no effect.
We are in a Windows XP SP2, NW6, ZfD4.01 ir6, iPrint 2 environment, with
automatic updates forced to the desktop everyday at 0900 hrs. I am a
little stumped, and cannot find any suggestions in the knowledgebase.
I would appreciate any suggestions that might help.
TIA
Rob

Rob,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Access policy issues and daylight savings

    I have the WRVS4400N. I have purchased a few Linksys routers in the past and have been happy with their operation. The wireless access however, was mediocre until I purchased this model. This model has great a great wireless connection. I like the fact that I can make many changes to the settings on the router without having to reboot the router. The performance of this router in combination with the cable modem has been excellent. It far outperforms the equipment that it replaced. I will normally pick a linksys product over another brand.
    I am having 2 intermittent issues that are really causing me grief and an additional couple of annoying issues. I need help in fixing these issues. I have confirmed that I have the latest firmware version.
    1) Some computers do not have connection to the internet. As if the security policy is confused about the time or connection. I really think this is a security policy issue, but I will let you decide.
    2) There are some computers that I allow a 24/7 connection to the internet. For the rest I don’t want them to have access between the hours of 12a-6a. I have found that the connection doesn’t always shut-off. I have kids and do not want them to have access during those hours. I never had problems with my previous linksys router.
    3) I am unable to set an access policy that spans the 5 min between 11:55p and 12a. In my previous linksys router I could.
    4) The new daylight savings schedule is not part of my current firmware. This really threw off my security policies.
    I have found that if I reboot or if I simply goto the security policy screen and click on save settings it seems to correct itself. But, I shouldn’t have to babysit it to make sure that it’s working correctly. When I am out of town I need to know that my security policies will continue to work while I am away.
    Here’s my set up:
    1) I have a linksys cable modem that connects me to the internet through my cable provider.
    2) I have the linksys wireless (WRVS4400N) router that connects to the cable modem.
    3) I have a 3Com Superstack II switch as the backbone of my network which connects to the router.
    4) I have several devices connected to this router: computers, xbox, vonage phone line.

    This is EXACTLY what my router is doing...
    2) Access restrictions do not work, PERIOD...."ALLOW" will disable internet access for the entire subnet (regardless of the rule), and "DENY" will prevent uploading of file attachments to hotmail, myspace, facebook etc....for every computer on the subnet.
    Message Edited by DSMKilla on 10-26-2008 11:08 AM
    (Edited post for guideline compliance. Thanks!) 
    Message Edited by JOHNDOE_06 on 10-26-2008 11:39 AM

  • Upgrade to SP3 from sql server 2008 R2 SP2 and SharePoint server 2010 known issues

    Hi Guys,
    We are planning to upgrade SQL server to SP3 from 2008 R2 SP2 and would like to known if there are any known issues with SharePoint 2010 server and office web apps.
    Though I was searching blogs and forums and could not find any noteworthy but wanted to look if any noted SharePoint issues after the upgrade.
    VM

    Hi Venu,
    There should no issue for SharePoint 2010 with install SP3 for SQL2008R2 (also like comments mentioned in article below), I searched from internal and internet, there seems no document/article mentioned the known issue for SharePoint about this, you can
    back up your environment and test the SP3 in a test environment before touching the production environment. 
    https://habaneroconsulting.com/insights/SharePoint-SQL-Server-Support-Matrix#.VSTY-nkfr4Y
    http://blogs.msdn.com/b/glsmall/archive/2014/12/03/list-of-fixes-in-sql-server-2008-r2-sp3.aspx
    Thanks
    Daniel Yang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Bootcamp 2.0, Win XP 32bit and beamer / external monitor activation

    Hi,
    similar topics have been posted but I could not find any solution yet...
    My system: MacBook (NOT Pro, Core2Duo, with 10.5 Leopard and Bootcamp 2.0 with Win XP Pro 32bit SP2) and Mini-DVI to DVI adapter.
    Working on Leopard connecting my external monitor (Fujitsu-Siemens P19-2) is working perfectly. It is automatically detected and activated.
    When I connect the monitor on Win XP, the desktop and tasbar flicker/are reloaded, i.e. ANYTHING is detected. However, the monitor is black and says "No signal" and i cannot activate it. I considered/tried:
    - the Windows way: FN + F7 => did not work / is deactivated and tools like Input Remapper didnt work (written for Macbook Pro only afaik)
    - the 2nd Windows way: Display Properties, Settings => any changes without effect
    - via Bootcamp / GMA Driver Properties: no possibility to activate 2nd monitor: Note at "Display Devices"-menu: "Two displays must be connected to the computer before you can use this feature. Please connect another display."
    Therefore my questions:
    - any solution i did not consider?
    - is it a bootcamp / driver issue to be solved in bootcamp updates?
    - is there a keyboard tool similar to inputRemapper for Not-Pro-Macbooks? (To activate not only FN+F7 but also Del and PSC)
    Thanks in advance...
    Ben

    Thing is, I am trying this too. However, the only option I get is to clone the display. This is not what I want, I want to use the TV as the primary display. This way games will startup on the big TV and not on my Macbook Pro. Now I don't get the option to use that TV as a primary display.
    So leaves me with the option to clone the display and have same image rendered on both screens... This is NOT what i want. In Leopard everything works great... obviously...
    PLease let me know if you got any solutions for this

  • Group Policy issue - Bandwidth detection failed

    Hi
    We have a major issue affecting multiple users (>100) where they are unable to login to the machine.It looks like core windows services do not start such as DHCPClient, EventLog, UserProfileService.
    Looking at the events on the pc I can see the following events:
    Event 6314
    Group policy bandwidth estimation failed. Group policy processing will continue. Assuming fast link.
    Event 6323
    Group Policy dependency (Network Location Awareness) did not start. As a result, network related features of Group Policy such as bandwidth estimation and response to network changes will not work.
    I can see the NLA service started but I am worried alot more machines will become unusable. A change was made to group policy regarding searching items in the start menu
    User Configuration\Administrative Templates\Start Menu and Taskbar
    Do not search files
    Enabled
    Do not search Internet
    Enabled
    Remove Games link from Start Menu
    Enabled
    Remove Help menu from Start Menu
    Enabled
    Remove Music icon from Start Menu
    Enabled
    Remove Network Connections from Start Menu
    Enabled
    Remove Network icon from Start Menu
    Enabled
    Remove Run menu from Start Menu
    Disabled
    Remove the networking icon
    Enabled
    Remove the volume control icon
    Disabled
    Remove user's folders from the Start Menu
    Enabled
    The clients are mostly Vista SP2 with some Windows 7. DCs are Server 2008.
    Any help in resolving this much appreciated.

    Hi,
    >>Group Policy dependency (Network Location Awareness) did not start. As a result, network related features of Group Policy such as bandwidth estimation and response to network changes will not work.
    Network Location Awareness service is a needed service for processing group policy settings since Windows Vista. It helps check the network location of the computers and helps detect slow link when processing group policy settings.
    Before going further, does this happen to all clients in our environment? Please check our network configuration and make sure that the clients are able to correctly communicate with DCs. Besides, we can try to reinstall network
    adapters to see if it helps. Moreover, please further check event logs to see if some other error events were logged.
    Here, we can also try to clean boot our clients to troubleshoot if this is caused by some third party services or applications.
    Regarding how to perform clean boot, the following article can be referred to for more information.
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135
    In addition, if everything goes clean, we can try to delay the application of Group Policy at startup by following the procedure described in the Resolution section in the article below to see if it helps.
    Windows 7 Clients intermittently fail to apply group policy at startup
    http://support.microsoft.com/kb/2421599
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • MiniSAP Navigator Problem Win XP SP2

    I am using the SAP Mini Basis System to practice ABAP programming. My problem is that in the Object Navigator, the Object List Selector is not displayed. This problem was already described here in an earlier discussion.
    I am using Win XP SP2, SAP GUI 6.20 (from Galileo Press book ABAP objects). Is there an other patch around? My problem is that I cannot download from SAP Service since I am not a customer. Any help would be appreciated.
    The original topic is
    Re: Object Navigator

    Everyone,
    http://www.sap-press.de/download/dateien/473/sapgui_patch.zip
    Thats the GUI update patch. That works.
    Install it. Reboot PC and restart miniSAP. Use new shortcuts created and enter new host in SAPlogon.
    You should be fine,
    Any issues, I can walk you through the process.

  • Hal.dll error during/after Win XP SP2 installation

    At the moment I'm trying to install Win XP (SP2) into a bootcamp partition. I have a Mac Pro with 4 HDDs.
    HDD1: OSX
    HDD2: free
    HDD3: OSX Data (raid 1)
    HDD4: OSX Data (raid 1)
    The setup I'd like to have is:
    HDD2:
    (1) Bootcamp-Partition (NTFS ~75GB)
    (2) Bootcamp-Scratch (NTFS ~150GB)
    (3) Scratch (HFS+ ~250GB)
    I partitioned the disk that way (with FAT32 instead of NTFS) and booted from the Windows install disk. The installer starts, reformats disk (1) to NTFS and copies data onto the disk.
    After the first reboot it breaks with hal.dll error. The files are on the disk but boot.ini seems to be corrupt. The "bootcfg" command from the recovery console is not working - it only duplicates the wrong entry in boot.ini.
    After the third non-working installation I tried to move the Bootcamp-Partition into the middle, OSX in front:
    (1) Scratch (HFS+ ~250GB)
    (2) Bootcamp-Partition (NTFS ~75GB)
    (3) Bootcamp-Scratch (NTFS ~150GB)
    Same error.
    Any hints on howto do that? Or will I have to move the Bootcamp-Disk to the end? How to succeed in having the Bootcamp-Scratch as 'D:' in Windows if I swap those two partitions?
    BTW: I succeeded to install WinXP on the same disk before. Back then I only had a 75GB Bootcamp-Partition on the disk (no other partition) and had the disk in Bay 3. But I moved it to Bay 2 because of performance problems in Bay3/4 (PIO-mode) and don't want to waste 400GB in the future .

    First of all I believe this is not the right place to discuss the issue. This issue is related to the Windows operating system file corruption and I think the physical location of the hard drive is not the cause of the issue.
    The hal.dll file is a system file which holds the hardware access layer information and linking the necessary components. This include the information about all the hardware resources for the operating system. What you had done to change the hardware configuration files in the boot.ini looks ok. Also you can try this link.
    http://shanegfowler.wordpress.com/2007/01/10/missing-haldll-error-corrupt-bootin i-file-quick-fix/
    Hope that helps you........

  • Problems with printing after upgrading to Win 8.1 and/ or explorer 11

    I just upgraded to Win 8.1 and now some things I want to print are not formatted properly. I've updated the drivers and the print doctor doesn't find anything wrong. The issue I see is when trying to print a shipping label, the label components are overlapping. On another computer it is fine and prints fine. Help?

    Hi FishingGuy58,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some printing issues since you upgraded to Windows 8.1.  So I can better assist you, Please respond with the Printer Model number.
    How Do I Find My Model Number?
    Once I have the information I can better research the issue and with any luck, come up with a resolution to this issue.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • ITunes will not start up in Windows XP SP2 and maxes out CPU

    Hello all,
    Apologies if this has been covered elsewhere, or if this is a similar problem faced by others.
    I have browsed the forums for hours trying to find a similar issue to my own, and have tried several solutions but none have worked. I have lost track of the amount of times I have re-installed iTunes.
    Having recently aquired an 80Gb iPod Video, I set about re-loading all of my music as 192Kb AAC in iTunes. I have always used iTunes to download music, but this is the first time I have used it so much, having previously used WMP to listen to my music collection.
    At some stage last week it stopped functioning, freezing everytime I started it up, and subsequently forcing me to use Task Manager to quit.
    Sometimes it would just freeze as soon as I clicked in the window, other times it would let me input my sign-in details before freezing whilst 'Accessing iTunes Store'.
    I did recently upgrade to iTunes 7.2, and decided to upgrade some of my files to non-DRM, and it had been working fine up until some point last week.
    Which is what I really can't understand. I had downloaded 7.2 a week or so before this happened, so could it really be an issue with the non-DRM tracks? I noticed in a previous post this being an issue, and not to upgrade, and so I attempted to install an earlier version 7.1, but still had the same issue with it freezing.
    Something I noticed today was that the Apple web page would not load, as the Quicktime plugin would not initiate. Could it be a Quicktime issue?
    Someone suggested to me it could be a issue with Norton?
    Another suggested it could be down to Automatic Updates.
    Having checked both of these avenues, there don't appear to be any programs downloaded onto my computer that would affect iTunes.
    All of my music is stored on an external USB 2.0 HDD. I can't imagine it being an issue with that, as I can access all of my files on that fine through My Computer.
    Apologies for the long an convoluted issue. Any help will be much appreciated. If I have missed anything I shall post again.
    Regards,
    Matthew Wittrick.
    Sony VAIO VGN-FS315B   Windows XP   WinXP SP2 / 1.8Ghz Pentium 4 / 512Mb RAM / External LaCie 160Gb HDD USB 2.0

    You can try a couple things. You may wish to try and rebuild your iTunes Library. At times if this gets corrupted it could cause possible freezing when launching itunes or using iTunes.
    Posted below is the article for that.
    How to re-create your iTunes Library
    http://docs.info.apple.com/article.html?artnum=93313
    or
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://docs.info.apple.com/article.html?artnum=302856
    You will also want to try a basic Uninstall and Install of the iTunes Software. Also ensure you have the latest version of iTunes and Quicktime. If you get the iTunes bundle it will include the update for both.
    You may also wish to create a new user and see what kind of results you get. If the issue is still the same. You may want to follow the article below. It speaks about cleaning out Apple Software and hidden files and folders. Since all your music is on a backup HD you do not have to worry about deleting any of it as it is already backed up.
    http://docs.info.apple.com/article.html?artnum=93976
    Trouble installing iTunes or QuickTime for Windows
    Please post back here if you need further assistance.

  • Group policy issue

    I have two Domain Controllers Main ( Main DC ) and Second DC.
    the date of some policies is not out of date....
    please check these files to know the problem.
    dcdiag.txt output:
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       * Verifying that the local machine ASMDC, is a Directory Server.
       Home Server = ASMDC
       * Connecting to directory service on server ASMDC.
       * Identified AD Forest.
       Collecting AD specific global data
       * Collecting site info.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
       The previous call succeeded
       Iterating through the sites
       Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
       Getting ISTG and options for the site
       * Identifying all servers.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
       The previous call succeeded....
       The previous call succeeded
       Iterating through the list of servers
       Getting information for the server CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       * Identifying all NC cross-refs.
       * Found 2 DC(s). Testing 2 of them.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\ASMDC
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             Determining IP4 connectivity
             Determining IP6 connectivity
             * Active Directory RPC Services Check
             ......................... ASMDC passed test Connectivity
       Testing server: Default-First-Site-Name\BSMDC
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             Determining IP4 connectivity
             Determining IP6 connectivity
             * Active Directory RPC Services Check
             ......................... BSMDC passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\ASMDC
          Starting test: Advertising
             The DC ASMDC is advertising itself as a DC and having a DS.
             The DC ASMDC is advertising as an LDAP server
             The DC ASMDC is advertising as having a writeable directory
             The DC ASMDC is advertising as a Key Distribution Center
             The DC ASMDC is advertising as a time server
             The DS ASMDC is advertising as a GC.
             ......................... ASMDC passed test Advertising
          Test omitted by user request: CheckSecurityError
          Test omitted by user request: CutoffServers
          Starting test: FrsEvent
             * The File Replication Service Event log test
             ......................... ASMDC passed test FrsEvent
          Starting test: DFSREvent
             The DFS Replication Event Log.
             ......................... ASMDC passed test DFSREvent
          Starting test: SysVolCheck
             * The File Replication Service SYSVOL ready test
             File Replication Service's SYSVOL is ready
             ......................... ASMDC passed test SysVolCheck
          Starting test: KccEvent
             * The KCC Event log test
             Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
             ......................... ASMDC passed test KccEvent
          Starting test: KnowsOfRoleHolders
             Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             ......................... ASMDC passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             Checking machine account for DC ASMDC on DC ASMDC.
             * SPN found :LDAP/ASMDC.buc.edu/buc.edu
             * SPN found :LDAP/ASMDC.buc.edu
             * SPN found :LDAP/ASMDC
             * SPN found :LDAP/ASMDC.buc.edu/BUC
             * SPN found :LDAP/5e88f85b-15a6-4ff5-b0fd-6df748df06fd._msdcs.buc.edu
             * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e88f85b-15a6-4ff5-b0fd-6df748df06fd/buc.edu
             * SPN found :HOST/ASMDC.buc.edu/buc.edu
             * SPN found :HOST/ASMDC.buc.edu
             * SPN found :HOST/ASMDC
             * SPN found :HOST/ASMDC.buc.edu/BUC
             * SPN found :GC/ASMDC.buc.edu/buc.edu
             ......................... ASMDC passed test MachineAccount
          Starting test: NCSecDesc
             * Security Permissions check for all NC's on DC ASMDC.
             * Security Permissions Check for
               DC=ForestDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               DC=DomainDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               CN=Schema,CN=Configuration,DC=buc,DC=edu
                (Schema,Version 3)
             * Security Permissions Check for
               CN=Configuration,DC=buc,DC=edu
                (Configuration,Version 3)
             * Security Permissions Check for
               DC=buc,DC=edu
                (Domain,Version 3)
             ......................... ASMDC passed test NCSecDesc
          Starting test: NetLogons
             * Network Logons Privileges Check
             Verified share \\ASMDC\netlogon
             Verified share \\ASMDC\sysvol
             ......................... ASMDC passed test NetLogons
          Starting test: ObjectsReplicated
             ASMDC is in domain DC=buc,DC=edu
             Checking for CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             Checking for CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             ......................... ASMDC passed test ObjectsReplicated
          Test omitted by user request: OutboundSecureChannels
          Starting test: Replications
             * Replications Check
             * Replication Latency Check
                DC=ForestDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=DomainDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Schema,CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
             * Replication Site Latency Check
             ......................... ASMDC passed test Replications
          Starting test: RidManager
             * Available RID Pool for the Domain is 8604 to 1073741823
             * ASMDC.buc.edu is the RID Master
             * DsBind with RID Master was successful
             * rIDAllocationPool is 7604 to 8103
             * rIDPreviousAllocationPool is 7604 to 8103
             * rIDNextRID: 7640
             ......................... ASMDC passed test RidManager
          Starting test: Services
             * Checking Service: EventSystem
             * Checking Service: RpcSs
             * Checking Service: NTDS
             * Checking Service: DnsCache
             * Checking Service: NtFrs
             * Checking Service: IsmServ
             * Checking Service: kdc
             * Checking Service: SamSs
             * Checking Service: LanmanServer
             * Checking Service: LanmanWorkstation
             * Checking Service: w32time
             * Checking Service: NETLOGON
             ......................... ASMDC passed test Services
          Starting test: SystemLog
             * The System Event log test
             An Warning Event occurred.  EventID: 0x825A0024
                Time Generated: 08/21/2014   00:22:16
                Event String:
                The time service has not synchronized the system time for 86400 seconds because none of the time service providers provided a usable time stamp. The time service will not update the local system
    time until it is able to synchronize with a time source. If the local system is configured to act as a time server for clients, it will stop advertising as a time source to clients. The time service will continue to retry and sync time with its time sources.
    Check system event log for other W32time events for more details. Run 'w32tm /resync' to force an instant time synchronization.
             An Warning Event occurred.  EventID: 0x8000000E
                Time Generated: 08/21/2014   00:32:29
                Event String:
                There were password errors using the Credential Manager. To remedy, launch the Stored User Names and Passwords control panel applet, and reenter the password for the credential BUC.EDU\administrator.
             An Error Event occurred.  EventID: 0x00000422
                Time Generated: 08/21/2014   00:32:29
                Event String:
                The processing of Group Policy failed. Windows attempted to read the file \\buc.edu\sysvol\buc.edu\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not
    successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
                a) Name Resolution/Network Connectivity to the current domain controller.
                b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
                c) The Distributed File System (DFS) client has been disabled.
             ......................... ASMDC failed test SystemLog
          Test omitted by user request: Topology
          Test omitted by user request: VerifyEnterpriseReferences
          Starting test: VerifyReferences
             The system object reference (serverReference)
             CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
             CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             The system object reference (serverReferenceBL)
             CN=ASMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
             and backlink on
             CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             ......................... ASMDC passed test VerifyReferences
          Test omitted by user request: VerifyReplicas
       Testing server: Default-First-Site-Name\BSMDC
          Starting test: Advertising
             The DC BSMDC is advertising itself as a DC and having a DS.
             The DC BSMDC is advertising as an LDAP server
             The DC BSMDC is advertising as having a writeable directory
             The DC BSMDC is advertising as a Key Distribution Center
             The DC BSMDC is advertising as a time server
             The DS BSMDC is advertising as a GC.
             ......................... BSMDC passed test Advertising
          Test omitted by user request: CheckSecurityError
          Test omitted by user request: CutoffServers
          Starting test: FrsEvent
             * The File Replication Service Event log test
             ......................... BSMDC passed test FrsEvent
          Starting test: DFSREvent
             The DFS Replication Event Log.
             ......................... BSMDC passed test DFSREvent
          Starting test: SysVolCheck
             * The File Replication Service SYSVOL ready test
             File Replication Service's SYSVOL is ready
             ......................... BSMDC passed test SysVolCheck
          Starting test: KccEvent
             * The KCC Event log test
             Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
             ......................... BSMDC passed test KccEvent
          Starting test: KnowsOfRoleHolders
             Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             ......................... BSMDC passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             Checking machine account for DC BSMDC on DC BSMDC.
             * SPN found :LDAP/BSMDC.buc.edu/buc.edu
             * SPN found :LDAP/BSMDC.buc.edu
             * SPN found :LDAP/BSMDC
             * SPN found :LDAP/BSMDC.buc.edu/BUC
             * SPN found :LDAP/93561cab-4fb3-421f-9a67-af6b4c280eca._msdcs.buc.edu
             * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/93561cab-4fb3-421f-9a67-af6b4c280eca/buc.edu
             * SPN found :HOST/BSMDC.buc.edu/buc.edu
             * SPN found :HOST/BSMDC.buc.edu
             * SPN found :HOST/BSMDC
             * SPN found :HOST/BSMDC.buc.edu/BUC
             * SPN found :GC/BSMDC.buc.edu/buc.edu
             ......................... BSMDC passed test MachineAccount
          Starting test: NCSecDesc
             * Security Permissions check for all NC's on DC BSMDC.
             * Security Permissions Check for
               DC=ForestDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               DC=DomainDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               CN=Schema,CN=Configuration,DC=buc,DC=edu
                (Schema,Version 3)
             * Security Permissions Check for
               CN=Configuration,DC=buc,DC=edu
                (Configuration,Version 3)
             * Security Permissions Check for
               DC=buc,DC=edu
                (Domain,Version 3)
             ......................... BSMDC passed test NCSecDesc
          Starting test: NetLogons
             * Network Logons Privileges Check
             Verified share \\BSMDC\netlogon
             Verified share \\BSMDC\sysvol
             ......................... BSMDC passed test NetLogons
          Starting test: ObjectsReplicated
             BSMDC is in domain DC=buc,DC=edu
             Checking for CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             Checking for CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             ......................... BSMDC passed test ObjectsReplicated
          Test omitted by user request: OutboundSecureChannels
          Starting test: Replications
             * Replications Check
             * Replication Latency Check
                DC=ForestDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=DomainDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Schema,CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
             * Replication Site Latency Check
             ......................... BSMDC passed test Replications
          Starting test: RidManager
             * Available RID Pool for the Domain is 8604 to 1073741823
             * ASMDC.buc.edu is the RID Master
             * DsBind with RID Master was successful
             * rIDAllocationPool is 8104 to 8603
             * rIDPreviousAllocationPool is 8104 to 8603
             * rIDNextRID: 8106
             ......................... BSMDC passed test RidManager
          Starting test: Services
             * Checking Service: EventSystem
             * Checking Service: RpcSs
             * Checking Service: NTDS
             * Checking Service: DnsCache
             * Checking Service: NtFrs
             * Checking Service: IsmServ
             * Checking Service: kdc
             * Checking Service: SamSs
             * Checking Service: LanmanServer
             * Checking Service: LanmanWorkstation
             * Checking Service: w32time
             * Checking Service: NETLOGON
             ......................... BSMDC passed test Services
          Starting test: SystemLog
             * The System Event log test
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:15
                Event String:
                Driver Send To Microsoft OneNote Driver required for printer Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:18
                Event String:
                Driver SolidPDF XChange required for printer SolidPDF XChange is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:18
                Event String:
                Driver NRG SP 3400N PCL 6 required for printer !!net_pc5!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:19
                Event String:
                Driver Send To Microsoft OneNote Driver required for printer !!BUCLAPTOP1!Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:20
                Event String:
                Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
             An Warning Event occurred.  EventID: 0x80000008
                Time Generated: 08/20/2014   23:52:20
                Event String:
                The jobs in the print queue for printer Microsoft XPS Document Writer (redirected 2) were deleted. No user action is required.
                To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
    Advanced tab, and then clear the Log spooler warning events check box.
             An Warning Event occurred.  EventID: 0x80000004
                Time Generated: 08/20/2014   23:52:20
                Event String:
                Printer Microsoft XPS Document Writer (redirected 2) will be deleted. No user action is required.
                To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
    Advanced tab, and then clear the Log spooler warning events check box.
             An Warning Event occurred.  EventID: 0x80000003
                Time Generated: 08/20/2014   23:52:20
                Event String:
                Printer Microsoft XPS Document Writer (redirected 2) was deleted, and users will no longer be able to print to this printer. No user action is required.
                To stop logging information events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click
    the Advanced tab, and then clear the Log spooler information events check box.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:22
                Event String:
                Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 (Copy 1) is unknown. Contact the administrator to install the driver before you log in again.
             ......................... BSMDC failed test SystemLog
          Test omitted by user request: Topology
          Test omitted by user request: VerifyEnterpriseReferences
          Starting test: VerifyReferences
             The system object reference (serverReference)
             CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
             CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             The system object reference (serverReferenceBL)
             CN=BSMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
             and backlink on
             CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             ......................... BSMDC passed test VerifyReferences
          Test omitted by user request: VerifyReplicas
          Test omitted by user request: DNS
          Test omitted by user request: DNS
          Test omitted by user request: DNS
          Test omitted by user request: DNS
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : buc
          Starting test: CheckSDRefDom
             ......................... buc passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... buc passed test CrossRefValidation
       Running enterprise tests on : buc.edu
          Test omitted by user request: DNS
          Test omitted by user request: DNS
          Starting test: LocatorCheck
             GC Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             PDC Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             Time Server Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             Preferred Time Server Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             KDC Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             ......................... buc.edu passed test LocatorCheck
          Starting test: Intersite
             Skipping site Default-First-Site-Name, this site is outside the scope
             provided by the command line arguments provided.
             ......................... buc.edu passed test Intersite
    ====================================================================
    Repadmin: running command /showrepl against full DC localhost
    Default-First-Site-Name\ASMDC
    DSA Options: IS_GC
    Site Options: (none)
    DSA object GUID: 5e88f85b-15a6-4ff5-b0fd-6df748df06fd
    DSA invocationID: 1355f657-cd24-4ad4-b890-f04f5c624acd
    ==== INBOUND NEIGHBORS ======================================
    DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-21 00:43:56 was successful.
    CN=Configuration,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-21 00:41:11 was successful.
    CN=Schema,CN=Configuration,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-20 23:51:37 was successful.
    DC=DomainDnsZones,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-21 00:45:39 was successful.
    DC=ForestDnsZones,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-20 23:51:37 was successful.
    Regards and thanks in advance
    Mhiar

    Hi,
    Based on the description, the Sysvol is replicated by FRS service.
    >>some policies at the main DC are not updated like same policies in second DC.
    In this case, we can do a non-authoritative restore on the main DC.
     To do so:   
    Click Start, and then click
    Run.
    In the
    Open box, type cmd and then press ENTER.
    In the
    Command box, type net stop ntfrs.
    Click Start, and then click
    Run.
    In the
    Open box, type regedit and then press ENTER.
    Locate the following subkey in the registry:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Backup/Restore\Process at Startup
    In the right pane, double-click
    BurFlags.
    In the
    Edit DWORD Value dialog box, type D2 and then click OK.
    Quit Registry Editor, and then switch to the
    Command box.
    In the
    Command box, type net start ntfrs.
    Quit the
    Command box.
    Regarding reinitializing File Replication Service replica sets, the following article can be referred to for more information.
    Using the BurFlags registry key to reinitialize File Replication Service replica sets
    http://support.microsoft.com/kb/290762/en-us
    Best regards,
    Frank Shen

  • T530 Intel SSD 520 Freeze Issue Win 7/8

    I've tried asking Lenovo support, however I'm yet to receive a reply. The other concern is that now that I know more, which may speed the reply, I'm unable to update the support request, which is annoying that such a feature is missing from the support system!
    Anyway, I thought I'd try this forum to see if anyone else is having/had this issue, and may be able to help.
    The issue: Widows 7/8 Freeze often for around ~30 seconds. 
    In Win 7 - Event viewer says "\Device\Ide\iaStor0 did not respond within the timeout period"
    In Win 8 - Event manager says "Reset to device, \Device\RaidPort0, was issued."
    After doing much research on the Internet, it would seem that this is a common issue with some SSDs and Intel's controller. The issue, in my case, is that Win 7 and 8 freezes when configured to use HIPM and DIPM, though I'm not sure if it's both or only one. In Win 7 I was able to use a registry hack (I say hack because I should have to resort to this to get it to work) to make Intel's SATA AHCI drive work. However, I wasn't able to use this same method in Win 8 as the new driver is slightly different and I can't find the necessary information to know how to implement it properly. You think that considering the SSD, chipset, and driver are made by Intel it would work, right? WRONG
    Reference: The win 7 registry hack: http://www.techsupportforum.com/forums/f108/solved​-device-ide-iastor0-did-not-respond-within-the-tim​...
    I have found a work around in Win 8, but I consider this not good enough, because I feel that all that should be required is for me to install the "Intel Rapid Storage Technology Driver" from the Lenovo support page and that should be it, the device should work. There should be no need to a registry hack or lose many hours trying to make it work - simply, not good enough!
    Reference: The work around I have for Win 8 is:
    Remove Intel's "Rapid Storage Technology Driver" in favour of MS's generic version
    Applying another registry hack to enable MS's power manger to show the HIPM and DIPM options
    Disable HIPM and DIPM
    Reference: MS's registry hack: http://www.sevenforums.com/tutorials/177819-ahci-l​ink-power-management-enable-hipm-dipm.html
    Pleb
    **Edited to fix hyper links which weren't working
    Solved!
    Go to Solution.

    I would not think so.
    My understanding is that it's more of a powersaving feature than anything else. I beleive HIPM and DIPM simply stands for Hardward Initiated Power Manager (Internals request power off for the sata bus), and the other Device Initaited Power Management (HD requests power off for the sata bus).

  • Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall and reinstall iTunes. I get the same failure each time.

    Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall iTunes and reinstall, same error occurs. What's up?

    Hello, rodneywjr. 
    Thank you for visiting Apple Support Communities. 
    Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue. 
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Cheers,
    Jason H. 

  • IPhone 3G and Exchange - Make sure Exchange has SP2 and install cert

    I had been working with a client to get his iPhone 3G connected to Exchange. Worked through all issues, got account setup, everything looked fine but no mail. No errors but no mail. I have read a lot of other posts regarding the same issue.
    Here are the settings I used for the Exchange account setup on the iPhone:
    Email: [email protected]
    Server: OWA URL (eg: owa.mycompany.com)
    Username: <domain_login> (only username, not domain)
    Password: <domain_password>
    These are what worked for me, YMMV.
    I found a post here that mentioned Exchange SP2. Sure enough, when I checked Exchange was only SP2. After installing Sp2 and rebooting the server the iPhone sync'd right away.
    I also manually installed the self-signed certificate (SBS 2K3). I did this before I found out about SP2, so I am not 100% sure this needs to be done but I know in Windows Mobile devices it has to. I found a website that mentioned that the "unable to verify certificate" message you get when you setup the exchange account does not actually install the certificate. I exported the cert from my PC (Went to the clients OWA page, installed the cert in IE, then went to MMC\Certificate Snap-in and exported it in DER format) and e-mailed it to the clients @mac.com account. He then opened the attachment which prompted him to install the cert.
    I know there are many threads pertaining to this but I wanted to get this in a new thread and out in the open.

    Mine said about invalid cert when is setup my exchange on the phone, but I just told it to continue anyway and it did.

  • Lookout 5 cannot find computer - win xp sp2 problem?

    I'm receiving this message when I try to connect to a machine in Lookout 5 object browser:
    Lookout cannot find any resources on the specified computer. This computer may have become disconnected from the network.
    The computer is not disconnected from the network, network connection is fine, ping and explorer browsing work fine. Object explorer lists the computer, but when I try to open it I receive the mentioned message.
    The only thing that I noticed odd is that problematic machine runs xp sp2, and other does not (it runs sp1). When I try to connect with other machine that also has sp1, all works fine.
    Anybody has a clue? Is this sp2 problem and is there a work around?
    Thanks,
    Darko

    The following KB article, and the links therein, discuss the SP2 and firewall issues for Lookout (and other NI products).  One of the links lists the ports used, etc., as well. 
    http://digital.ni.com/public.nsf/websearch/1708e8a3106c1c3886256e5b005072fe
    If the above link doesn't work, search for KB article # 37H7JBQA.
    Regards,
    -Khalid

  • Homegroup madness Win 8.1 and Toshiba cloud TV

    I purchased both a Dell "all in one" running Win 8 and a Toshiba Cloud TV that includes "mediashare". For some time, it worked great. But around the time I upgraded to Win 8.1, mediashare stopped working. I've gone through all my settings
    (that I know of) and found no issues. Used "find and fix" options with no relief. File sharing and network discovery are turned on. The TV shows up under "Network" but there is nothing under "Homegroup" and the TV can not access
    any files from the Dell HD. Losing my mind...

    The TV shows up under "Network" but there is nothing under "Homegroup" and the TV can not access any files from the Dell HD. Losing my mind...
    Hi,
    Seems the TV is not in your homegroup?
    Please make sure that you've added TV to your homegroup, move mouse to the right charm bar\Settings\Change PC settings\Networking\Homegroup, Tap or click the control under
    Media devices if you want to allow devices on the network, such as your Toshiba Cloud TV.
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for

  • Tamanho do arquivo XML para SEFAZ

    Prezados, bom dia. Tivemos problema com uma nota emitida que ultrapassou o tamanho permito do XML para a SEFAZ, ou seja, acima de 500.000 bytes( a nota era de importação e havia muitos itens). Isso nos trouxe problemas no P11 onde não gerou bacht e n

  • Exchange 2003 giving occasional NDR's

    We have an Exchange 2003 Server awaiting a migration to 2013. Before we can migrate we need to find out the reason for some occasional mail, sending NDR's to a sender of email. The mail that generates an NDR, will 'leak through' to the recipients wit

  • Debugging in Xcode App. not built in Xcode in Intel Machine doesn't work

    I am using Xcode version 2.4.1 in a MacBook Pro with MAC OS X 10.4.11. I build my app using ant. The output is an application bundle. I try debugging my app using Xcode, because of a nicer interface. To do this, I create an empty project, add a custo

  • Regarding ports and partner profiles in ALE.

    Hi All, Please tell me how to transport the partner profiles and ports from Development to Quality systems. Please reply asap.

  • Clipping question

    Hi, I have a JScrollPane that manage a view with very large components and therefore user can view only a small part of components at a given time. In the drawComponent method of the visualised components, I draw a scale using long lines (g.drawLine