Policy warning randomly applying for no reason

We have ZCM 11.2.4. This week severalk users are randomly getting:
"ZENworks policies have been applied on the device which require a relogin
to take effect. Save your work before the relogin occurs"
But ...there have been no policy changes that should be prompting this.
I've tried clearing the ZENCache but that hasn't helped.
I don't know why this is has started happening or how to fix it.
Thomas

#1 - Does this happen on the same PC a user has been using over and over
again? Sometimes "Delayed Refreshes" may cause this for 1st time logons.
#2 - Is the User Volatile?
Note: You can configure the Policies to NOT prompt when they change.
This is a per policy setting. Depending on your environment, this may
resolve the annoyance so long as these events are not having other
negative impacts before or after.
On 2/11/2014 5:36 AM, Thomas Roberts wrote:
> We have ZCM 11.2.4. This week severalk users are randomly getting:
>
> "ZENworks policies have been applied on the device which require a relogin
> to take effect. Save your work before the relogin occurs"
>
> But ...there have been no policy changes that should be prompting this.
>
> I've tried clearing the ZENCache but that hasn't helped.
>
> I don't know why this is has started happening or how to fix it.
>
> Thomas
>
Craig Wilson
Novell, Inc
Any Comments or Posts are only my views and not Novell's
Accuracy Attempted but not guaranteed.

Similar Messages

  • Iphone won't download all photos into window photo gallery, downloads old random photos for some reason.

    Hi my iphone has just started to not download the most recent photos but photos from months ago each time in a random order. I cannot down load my most recent photos but can e-mail them. I am using Windows photo gallery or Picture Motion Browser. Any ideas would be great...

    Try to delete the photo cache, described here: http://support.apple.com/kb/TS1314

  • Random pauses for no reason

    I am using iTunes 7.0.2 on Mac OS 10.4.8 with airport express (airTunes) to play my music to my stereo. I've never had any trouble with this before, but recently the music has been stopping for a few seconds every few minuets.
    It starts again where it left off, and the track time stops counting while it's frozen. I haven't noticed if it's happening with particular file formats, and it doesn't seem connected with loading the next song or anything like that.
    Anyone else been having this problem?

    I have been having the same issue since upgrading ITunes and my firmware, not sure which might be causing it. I intially thought it might be the external hard drive I am using to store my Music, but after I moved a block to the system hard drive I eventully got the same issues.

  • My video dims randomly for no reason - can't reset

    I have an iMac G5 20" second generation... my problem is that my video display will randomly dim for no reason. In my settings, I do not allow it to go to sleep, display is not allowed to go to sleep, under options tab, Automatically reduce the brightness of the display before display sleep is NOT checked.
    On the display tab, Brightness slider is all the way to full brightness.
    Any ideas on what could be causing this?
    Thanks in advance.

    This may sound like bad news but the only way to get past that passcode lock at this point is by doing a restore.... A recovery mode restored to be exact... http://support.apple.com/kb/HT1808 Restores are the only way to be able to get past passcode locks... The restore will get the iPad back in working order for you but if you don't have a back up you will lose the information that you currently have on it... At this point your devices isn't going to allow you to make a backup because of the passcode lock.... So hopefully you have a iCloud or in iTunes backup that was made before this happened...iOS: Back up and restore your iOS device with iCloud or iTunes....I actually had this exact same thing happened to me

  • Modem disconnect for no reason and when I get phone calls constantly

     Out of nowhere  or when I get a phone call, my modem would just randomly disconnect for no reason. Sometimes it disconnects a few times during an hour or back to back once I get internet back on, it goes out sometimes it doesn't for hours. It can get very frustrating if I'm doing some important only to realize it got disconnected and my work might be lost. My modem is a WESTELL Model: E90-610015-06
      I have went through the modem combo and when I try to enter the user name and password, it will not allow me to get in. I depend on the internet for business and my daughter depends on it for college work. What can be done? In addition, this has been constantly since this pass weekend. It started on Friday.
    Thank You

    Can you provide the Transceiver Statistics from the Westell? Visit http://192.168.1.1/for me and do the following:
    1: If you see a Blue and White Westell page, mouse over Troubleshooting, go to DSL, and choose Transceiver Statistics. Copy/Paste the information on that page.
    2: Go to System Monitoring > Advanced Monitors > Transceiver Statistics. Copy/Paste the information on that page.
    3: Try visiting http://192.168.1.1/transtat.htm which is a direct link to the Stats on older modems.
    If you need a Username and Password, try the following:
    admin/password
    admin/password1
    admin/admin
    admin/admin1
    admin/Serial Number.
    By Serial Number, I don't mean type in the words Serial Number. I mean find and type in the serial number found on the bottom of this rou
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Workouts keep ending for no reason

    Ive been using the Nike+ for about 2 weeks now and my workouts keep randomly ending for no reason. After anywhere from .1 - 4 miles it will just stop and say workout complete. Then when I try to start again it tells me I need to connect the reciever even though i never removed it. I have to pull it out and put it back in again for it to recognize it. Has anyone else had this problem? Any suggestions?

    I have just started having this same problem. I exchanged my kit and am still experiencing difficulty. If you go back several pages on the message board, you will see a few threads with similar problems described. Unfortunately, I have not seen any sol'n yet, just hypotheses as to why it may be happening (heat, moisture, signal strength from the transmitter). I think it is none of these problems and will likely be solved with a software update from Apple, hopefully very soon! I am going to try running with the hold button on and see if that works, I'm also going to call the tech support numbers that came with the kit.
    Post back if you find a solution!!!

  • MacBook Pro screen randomly turns black on me for no reason while I'm using it? What's wrong with my MacBook?

    I have a MacBook Pro from 2009 and the screen randomly turns black on me for no reason while I'm using it? It takes anywhere from 5 seconds to 1 minute to turn back on and no matter what I do it just has to fix itself so idk if it is going in to sleep mode or what. Anyone know the issue? Thanks.

    Run through them and stop after #16 or if the problem stops, or if something tells you something severe (like hardware test giving a error)
    If you can backup your personal data off the machine, you should do that first.
    Hardware issues we cant' fix, only a few things may fix it.
    Software issues we can fix, but right now we don't know what is causing your issue as we can't see it obviously.
    So your going through a process of elimination to try to give us a clue what's the problem and then we can advise a course of action.
    If you feel this is way over your head, then just make a appointement with Apple and/or your local PC/Mac specialist.
    We are only other uesrs here, helping other users.

  • I'm applying for jobs online through my iPad using the safari app. For some reason when I try to attach my resume, which I have saved in Pages, it does not give me an option to go to Pages. It only gives my an option to choose a file from photos. Does it

    I’m applying for jobs online through my iPad using the safari app. For
    some reason when I try to attach my resume, which I have saved in
    Pages, it does not give me an option to go to Pages. It only gives
    my an option to choose a file from photos. Does it not have the
    capability to choose a location other than photos??

    No. Safari does not have the option to attach files for uploading other than photos.
    Look at iCab Mobile in the App Store. There are other browsers that may do this, but I'm pretty sure that iCab will fill the need.
    iCab Mobile (Web Browser) on the App Store on iTunes
    take a look at this.
    http://www.icab-mobile.de/faq.html

  • Iphone randomly clicks on stuff for no reason

    My iphone goes randomly clicking on stuff for no reason, it only stops if you turn it off then back on then starts doing it again the phone is only 1 week old went to Telstra store in Gawler SA and they said i needed a virus protection on it.  Since found out you dont on a iphone so why is this happening its only a week old

    As ckuan suggested, unless you have jailbroken the phone then it may be damaged and should be replaced.
    If you have jailbroken the phone then you are one your own.
    One other thing to try is to remove any cases that you have on the phone and any screen protectors (unnecessary).  They may be giving false touch signals to the phone if there is contamination or moisture under them.

  • Phone randomly rebooting for no apparent reason

    Yesterday my phone started randomly rebooting. No apparent reason. No physical damage. No recent software changes that I am aware of. I have auto-update of apps turned off. Verizon store could not explain it. Forced soft reset did not fix the problem. It happens continually with a reboot, operates for a bit, then instantly shuts off and begins rebooting again until the battery is completely drained away. On the Droid Razr Maxx there is no way to remove the integrated battery so this means it goes until the phone is dead. Seriously overheating it in the process. What do I do?

    The power cycle is what I referred to as a forced soft reset. Does not fix.
    I tried the flush of the system cache. Does not fix it.
    It took some time to be able to copy off the phone data in the 8GB of internal memory during the brief time the phone is available prior to the next reboot cycle. Afterwards I did a complete factory reset. Does not fix it.
    After the factory reset it takes the phone a few minutes to initialize itself. But the phone reboots itself before this phase can complete. I have tried at least 20 times to see if I can get lucky and have it finish before the next random reboot cycle. No success. So now I have a completely wiped phone that can not even get to the home screen.
    I have taken excellent care of my phone. Doesn't get dropped. Spent most of its life in my pocket. No misuse of any kind. It does not seem right for it to just stop working for no reason like this. Is there a way to get Verizon/Motorola to refurbish or replace it?

  • I use Yahoo Calendar on my IPhone.  For whatever reason when I go into my calendar I will see at the top of the screen that 5 or 6 "calendars" are being used and one of them is the one I called Dana_Gardner and is legitimate, the others are randomly named

    I use Yahoo Calendar on my IPhone.  For whatever reason when I go into my calendar I will see at the top of the screen that 5 or 6 "calendars" are being used and one of them is the one I called Dana_Gardner and is legitimate, the others are randomly named with letters and numbers. Why is the IPhone creating additional "calendars"? I only asked for one to be set-up. I don't understand, I have to go into the calendar settings daily and uncheck these un-asked for calendars. Help!

    Mine is doing the same thing.  I deleted the whole account from the mail settings and it got rid of most of the extra calendars.  But there are still 2 gibberish ones left.

  • HT2265 for some reason the only photos that do the random scrolling are events, can I include the albums from iphoto to scroll as well.   the know the albums have synced because i can view them in slideshow

    for some reason the only photos that do the random scrolling are photos in the events section of iphoto. is it possible to include the albums from iphoto to scroll as well.   the know the albums have synced because i can view them in slideshow  pls help

    Welcome to the Apple Community.
    I assume you are referring to the screensaver. You can change the photos used by the screensaver in the screensaver settings. Note if you have a large number of photos in the collection you choose for screensaver, not all of them will be used due to the limited storage available to the Apple TV.

  • Firefox crashes for no reason, randomly. Sometimes I can be on it for hours and its fine and sometimes it crashes over and over again.

    I just purchased an HP laptop. It has Windows 8 installed on it. Ever since getting Firefox installed (with no add ons) I have been having problems. Firefox starts fine, loads fine, works fine. But then there are times when it will crash over and over again for no reason at all. Google.com is my homepage and sometimes it crashes on that.
    I don't go to many pages, facebook is the main one and it crashes almost constantly now. This is the longest I've been online in 2 days.

    Hello katielawrence, We're sorry to hear that your Firefox seems to be crashing. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
    #Enter about:crashes in the Firefox location bar (that's where you enter your website names) and press Enter. You should now see a list of submitted crash reports.
    #Copy the most recent 5 report IDs that you see in the crash report window and paste them into your forum response.
    Thanks in advance for your help!

  • The urgent notice to update to Firefox 5.0 for security reasons warned that"Incompatible Add-ons Found" and won't work until made compatible but how do I make them"compatible?"

    When I tried to respond to the urgent notice to update to Firefox 5.0 for security reasons I was stopped by a screen that said "Incompatible Add-ons Found" It identified two add-ons, Move Media Player 1.0.0.07103010 and Real Player Browser Record Plugin 14.0.3 that would be disabled. It said that "as soon as they are "made compatible" Firefox will update and re-enable these add-ons" It is not clear who is to make them compatile. I have no idea how to make them compatible and I don't even know what they are for. I don't want to lose any functionality as the result of an update, so what should I do?

    Make sure that your IP address is not being shared. See the note at the top of this page.
    Port forwarding problems
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • For some reason my photo shop 4 failes to apply chages after 5 actions.

    Good day, I have been using photo shop cs4 on a desktop running windows 7 for some time now.
    Fore some reason now when I edit my Nikon raw image and jpeg images I can only make
    about 5 types of changes. After that the next action changes do not work the screen does
    not show the change. Most obvius is when the problem shows up when I switch to the sharpen
    u sharp tool, the privue window is white, I try select a part of the image and no change is made.
    I changed the start action and then I can not use the healing brush, no changes it made
    with any tool. Once I selected this tool I can no longer change tool in the tools bar.
    Today I loaded a system back up from 01/11/2010 (acronis full back up) I have the same
    problem??? It was OK before! So does anyone know of a tool that can help me figurte this out.
    This may not be a problem within Photo shop but it the starting point.

    Standard questions:
    Have you updated to version 11.0.1?
    Have you updated your video drivers?
    Is you video card compatible? See http://www.adobe.com/go/kb405711
    Have you tried turning off OpenGL in preferences?
    If the answer is no to any of the above, please take the appropriate action and your problem will probably go away

Maybe you are looking for

  • BI pulisher errors out when I tried to load xml in rtf template.

    Hello, Today I have installed bi publisher with .net framework.But when I tried to load the xml file after opening .rtf template it gives error "XSD parser returned an error" Please let me know what could be the issue. Thanks Ganesh Mane

  • KE30 report for a Configerable material.

    Hi all! Our client uses KE30 report regularly. But for a particular material the report is not giving the kind of output that is required. The follwing is the sales process. The material whcih is configuable ( with Item category group 002 and Item ca

  • How to increase the quantity in KANBAN bin via BAPI or user exit?

    Hi everyone, Currently my interface is posting MIGO movement type 201 (Goods Issue with ref to Cost Centre).Stock in SLOC will decrese. Then my program will use BAPI (BAPI_KANBANCC_WITHDRAWQUANTITY) to update the qty in the KANBAN to reduce the qty.

  • Nothing displays on Predictive part in SAP Predictive Analysis

    Hi, Earlier, I created a predictive analysis using R-K Means algorithm, and the result was displayed a week ago and saved it. I opened it several times, trying to beautify the same. But today when I opened it, nothing is seen and also I am unable to

  • PXI system cannot be identified by the PC

    PC doesn't see the PXI system. When I tried to install the service platform for chassis and controller ver 2.5. A message states that a higher version is already installed.