Poll: Do you have cold boot problem with SB X-FI Fatal1t

Hi guys:
I have post a thread regarding the cold boot problem with SB X-FI Fatalty and OCZ GameXStream 600W SLI power supply combination. Apparently, no one has answer to that . In addition, I have recently RMA'd my psu and received a brand-new unit. The same problem still exists. If the problem is really with the power supply, doesn't matter what kind of the setup I have, I should still have the cold-boot problem. However, it doesn't seem like that. Doesn't matter what kind of cards I put on the motherboard, as long as the SB X-FI Fatalty card is there, there is cold boot problem (even with the setup of cpu, mother, ram, and the sound card only, WITHOUT video card and harddri've). And for other different setup without the SB X-FI Fatalty card, there is no cold boot. The cpu and memory are running at stock speed.
My post regarding the cold boot issue:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=79753
There is one user on the forum saying he has the same problem. Therefore, I think it might be the imcompatibility between the X-FI Fatalty and OCZ GameXStream PSU.
I would like to know how many people that has the same problem that I am having. So I can possibly narrow down the problem and contact OCZ tech support or creative tech support with more information. It would also be benefitical to those who have the same problem as I do.
Please post your system setup as well in the thread.
Greatly appreciate your opinions. Message Edited by White_Hair on 2-02-200604:58 AM
Message Edited by White_Hair on 2-02-200603:22 PM

I would venture to say that it isn't your powersupply, but more likely the X-Fi. I had troubles with my system, until I pulled out my X-Fi and replaced it with a non Creative Labs sound card. One of my troubles, which I incorrectly blamed on my powersupply was the ASUS A8R-MVP motherboard I had and the X-Fi XtremeMusic card, was after gaming for 4 hours, was the?sudden reboot of my system. Powersupply before, was an Antec TrueControl 2 550watt PSU. As it stands right now, I no longer have the parts mentioned and have a decent 700watt powersupply in my system, along with an ABIT AT8 32X motherboard. As you have probably seen there are a lot of problems with the X-Fi soundcards, and I in my right mind can't blame the motherboard, powersupply, motherboard chipset, ram, or any other component in ones system, if one is having trouble other than the X-Fi itself. I'll be honest, there is something quite frankly wrong with the X-Fi, and exactly what that is, I'll probably never know like most people.

Similar Messages

K8N NEO4 Platinum cold boot problem with 165 opteron?

I have this board and have a cold boot problem with my opteron. Is there anything I can do to fix this? Its starting to get very anooying.
K8N NEO4 Platinum
165 opty dual core
2X1GB Ballistix PC4000
160GB sata2
7800GTX
X-Fi platinum
600 watt seasonic PSU

Well I am running them at the rated speed of 250 and the rated timings of 3-4-4-10 on the rated 2.8 volts. Ballistix have been known to die quickly when you throw to many volts at them for some reason. I dont get the cold boot problem with the OCZ. Once I finally get it to boot with the Ballistix it works just fine but the next morning I play hell to get it to boot again. I dont even get the main screen to let me get into bios. It just stays black. I have done all kinds of stress testing and ran memtest with no problems. I am really at a loss here.

Cold boot problem with X-FI Fata1ty card... Need serious help!

Hey guys:
I just finished upgrading my computer. Realized that I have a cold boot problem. In order to identify the source of problem. I began the following test.
. Remove everything except, cpu, heatsink, ram, video card. Tried to boot with those devices. => No cold boot problem.
2. Install the rest of the ram sticks (I have 4 x 52 in total). => No cold boot problem.
3. Install the other video card (my setup is 7900gtx in SLI) => No cold boot problem.
4. Install the Creative X-FI Fataty card. => COLD BOOT PROBLEM
Once the computer is shut down via the front power switch on the case, the computer will not boot again. To boot the computer, I need to switch off the main power switch on the back of the psu and switch it back on; then turn on the computer via the front power switch on the case. I tried the problem with and without the sound card. Whenever the sound card is installed. There is the problem. If there is no that sound card in my rig, then there won't be any cold-boot problem.
My rig specs:
DFI Lanparty nF4 SLI-DR Venus
AMD Opteron 65 CCBE 609 - Stock speed
4 x 52 MB G.Skill Samsung TCCD LE 2.85V DDR 400
CPU Cooling - Tuniq tower 20
2 x EVGA 7900 GTX Stock - SLI
3 x WD Raptor 74G RAID-0 SATA (-3) 0000 rpm (System)
x Seagate Barracuda 7200.7 60Gb 7200RPM NCQ SATA - 4 (Backup)
Pioneer Black DVR 0 DVD+/-RW - IDE /0
Lian-li PC-V 200B Plus-2 with little case mod
OCZ GameXstream 600W
Creative Fatalty Sound Card w/ Front Panel
Logitech Z5500 5. speakers
I need serious help. This problem is so annoying.
Tnanks and will greatly appreciate it.Message Edited by White_Hair on 0-27-200605:4 PM

The onboard sound is disabled. Unfortunately I sold the Seasonic PSU to my friend. The OCZ GameXStream is suppose to be the higher grade psu than Seasonic PSU. Also, the cold boot problem only exists if the sound card is plugged to the motherboard. I tried change different pci slot. It doesn't seem to help the problem. Thanks for the reply Message Edited by White_Hair on 2-02-200606:07 AM

MSI G33M-FI and MSI 9600GT OC cold boot problem

So I just recently put together my new computer (MSI G33M-FI motherboard) and whenever I shut it down and turn it on the computer will turn off in about 3 seconds (you won't see the bios screen) and then it just turns on and off endlessly/ in a loop.
Fix is to clear CMOS and it will boot ok but whenever I turn it off (no restart..) the problem is back!, only clear CMOS helps...
Good thing I found the problem, the videocard (MSI 9600GT OC). When I switch it with my poorly ATI 1950pro I have no problem with a cold boot.
Using the latest bios version with the motherboard (on the MSI site). Havent flashed my 9600GT 512mb (red double slot cooler version) with a another bios yet though.. (if there is 1, just checked- no new bios).
Anyone got an idea how to fix this? I don't think so but maybe they should make a new bios to fix this?
Other parts from computer: Patriot extreme 4 gig (2x2) ddr2 performance (4-4-4-12, 2.2 volt) and an intel e8400 cpu.
Anyone else having this problem? Thanks...

I had cold-boot problems with my G33M-FI. Tried E2140 and Q6600 CPUs at stock voltages/clocks, tried two different sets of DDR2-800 RAM (4x1GB and 4x2GB), tried different CMOS batteries and tried two different power supplies (Thermaltake and Coolermaster 500W supplies). Regardless of combination of components, system would frequently fail to POST. Problems were experienced with integrated video (no add-on cards installed) and with/without any drives connected. Problems were also experienced with a single good stick of RAM in slot 1 vs. all four slots populated. Once booted, the system performed flawlessly passing memtest86+ and other reliability/stability tests. Once the system failed to boot, it would almost never boot again until I cleared the BIOS (sometimes requiring me to remove and reinsert the CMOS battery, since the jumper alone didn't cure the problem). Trial and error of different hardware combinations in an attempt to isolate the problem with a CMOS clear/recovery between attempts proved to be a very painful and tedious process. After speaking with MSI tech support, solution was to RMA the board.

Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks

Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks Ben [email protected]

Hello Trevor
Thanks for your message. You can custom set pages but there are no preset of page sizes like A4, A3, ect. I cannot click the size preference, nothing comes up
Ben

Have recently had problems with itunes freezing on me so having done various things to rectify it im now going to try to create a new user account but where the heck do you find the start menu ?

have recently had problems with itunes freezing on me so having done various things to remody it , im now going to try to create a new user account but i cant find where to start things ! ive been told to go to the start menu but where the heck is it ?

Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software.

TS1702 I have developed a problem with some of th apps that connect and the throws you out of the games losing. Life or they won't connect at all can anyone offer a suggestion to solve problem

I have developed a problem with some of my games apps - it closes the app and therefore less life's - it is not all games yangy suggestions

What???

K7N2 Delta-L: Strange cold boot problem & solution

My K7N2 Delta-L has a problem cold booting when the vcore is set in the bios at 1.65v of higher. After a cold boot, you get a blank black screen. I noticed that even if you run at default speeds but set the vcore to 1.65v of higher the problem still occurs. There is no problem rebooting however.
I found the following solutions:
1. After you power up and get a blank, hit the reset button.
2. Don't unplug your PC. My PC is connected to a AVR and after I power down the PC I usually turn the AVR off. If i do this, than the computer will have a booting problem if I try to boot it up 30 minutes later or so. Now if I don't unplug it/power off the AVR than everything is fine.
I don't understand why it acts the way it does though.
Does anyone know of any other solutions?

Have you cleared the cmos. If you do be sure you have the power turned off don't move the cmos jumper with the power on.
I found that turning off power at power supply and unpluging, than turning on the computer the fans will spin just a little this drains all the power. Clear cmos 2-3 than return to
1-2 position.
Than plug the power back in and turn it back on, than try the computer again.

Cold boot problems

Hi out there,
I have a problem with my MSI 6590. When I boot it hangs on th detection of the IDE HDD. It stays there for about 25 seconds and then tries the floppy and cd-rom. As it does not find an OS it stopps. When warmbooting from there the boot works as HDD is recognized and everything works fine from there on.
Anybody out there who has teh same problem or an explanationor better even a fix ?
I am using a WD1200JB.
:(

Hi,
Don't know if our issues have anything in common, but me and a few others have experienced lots of cold boot crashes with Win2K and WinXP. These issues disappear when the PC has "warmed up". Boards KT4 Ultra and KT4V.
In my case for example, W2K might crash on cold boot reporting random errors, but this never happens when the PC has warmed up.
All my components have been checked and bios settings set to default so it has to be an issue with the board or bios code or something. I have also reinstalled the OS many times and tried different IDE cables, power supplies - you name it. Issues remain (and got worse with the new 1.25 beta bios, so I flashed back to v1.10).
But - check your cables and connections. Try to replace the IDE cable and also try the suggested jumper change. Hopefully your issue is just a loose connection or starts working with a different jumper setup.
As a long shot bug check - try to drop your cpu FSB down to 128 MHz or even all the way to 100 MHz (if running at 133 MHz) and check whether this takes the issue away.
Regards,
Tom

X200s + OCZ Vertex 3 cold boot problems

Hello,
I installed an OCZ 120GB Vertex 3 drive in my Lenovo X200s Thinkpad laptop (drive firmware 2.15, latest X200 bios) and have had endless problems with coldboots. I have win7 (64 bit) and ubuntu 11.10 (64 bit) installed and can only get into the GRUB2 menu once in 3-5 times (loads of ctrl-alt-delete or off until I get through). However, going to sleep then restarting the machine works fine.
win7 doesn't work with AHCI enabled (loads of random BSODs) but Ubuntu is fine. In compatibility mode, win7 boots but may not have liked the latest updates, will need to come back to that later.
I've checked other forums (including the OCZ forum) and the solution right now seems to be to upgrade the drive firmware to the latest 2.15 version and to "secure erase" the drive before reinstalling. People who have "secure erased" their drives are fine for a few days but then the problem reappears. RMAing the drive doesn't seem to help either.
So basically, what I'm asking is if anyone's been through the same cold boot problems and / or managed to fix this.
Cheers,
John

Obviously it is the OCZ Vertex 3 flaw. I have a friend finally threw it away and brought a Plextron one. Please have it replaced. I think you should get the hint that the drive is buggy when AHCI causes BSODs.
[2011]X220-4286-CTO(Brand new, hope nothing bad will happen to it...)[2008]X61-7673-CV2(Slipped upon it, but also working)[2002]X31-2672-BCH(Broke screen, but still working!)

K9A2 Platinum Cold Boot problem

Hi, recently I have encounter this problem on my K9A2 Platinum that didn't occur before, where after powered off for a few hours, when booting up, there is power to the system but the system won't boot (i.e. no POST or anything). The reset button on my chassis also won't work at that time. And after pressing the power button to shutdown, it won't power up again until I've turn off the mains and wait until the power LED on the mobo to turn off and turning on the mains again.
After that, my system would be able to boot successfully, but the bios clock will be slow by a few hours. E.g. current time 9am, bios time 5am. I've tried flashing the bios to the latest version and resetting the bios settings doesnt help at all.
Can anyone plz help me?
My current rig config is
K9A2 Platinum w/ phenom 9500
6gb kingston ddr2 1066mhz
PowerColor HD3870
Xonar Essence STX
Coolermaster RPP 750w
Thanks a lot in advance.

Quote from: Henry on 23-March-10, 07:29:17
Did your problem start after you added this mixed batch of RAM? When did you add RAM to what you had 2 years ago? AMD works best when only 2 sticks are used and you have messed that up by adding 2 more sticks of different RAM. Does it work OK if you remove two of the sticks?
Not really, I had the mixed batch of ram for almost 8 months without any problems. And the cold boot problem does not happen everytime. I've just tried booting up without any issues this time round. I would see if the problem occurs again and test it with a new cmos battery.

Helloo! I have super big problem with my Air.

Helloo! I have super big problem with my Air,10.8.5 ,it asks every 10 sec to make some changes and asks me for password all the time!! I cant acces my documesnt,pics,music,NOTHING at all! Finder is not working,i cant open any folder,icons are missing also,i cant open any of them,mozzila,chrome..im really going crazy.. i updated tonight my phone on new IOS 7 through my comp,cant be that i messed up everything because of that..this comp.is like 10 days old.
btw. i created new user,and everything is working ok.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Quasi-boot problem with TI/Pwrbk

I 10.4.11 but not the most recent security updates and a 667Mhz Ti G4 Pwbk Onyx/DVI and new 40G hard drive that works fine also have with 512 SDRAM
Problem is that only sometimes, when I power-on I hear whirring etc...but never get a gray screen ergo no apple and no boot yet the machine is putting out plenty of heat lookinf for start-up disk
I've used the option key and that sometimes work but it same percentage of iffyness whether I use it or not and whether machine will boot or not.
I've read archives for this problem and have reset PRAM ---little button under right side of keyboard--- several times but problem always comes back after a couple of reboots.
Interesting that after I reset PRAM the first time i boot I hear the apple tone.
That is the only time I ever hear that tone on this machine, whether it goes ahead and boots fine or not.
Also get very infrequent kernal panics but the not booting or only booting after several retrys or reseting PRAM.
I guess its just and old machine not designed fro 10.4 and maybe it just needs a new battery --not PRAM batt--- as this one does not hold a charge for very long if at all, and maybe more RAM would make a differrence.
What can I expect from a machine this old for only $245? Problay not much more than I'm getting.
Still, considering how much it was new I like it.
Ran

Hi karbon, yeah its not pram battery and probably not anything to do with the main battery either, since hearing you have poor batt. also with no starting problems like i have, plus I'm now finding out my wifes new used, ibook 12" inch with a good batt. is also having similar starting black screen problem.
Yes I did install the HD myself, but computer runs fine and all is very stable, except for once in a month kernal panic. Not much of a problem.
Had only just bought the computer and it booted ok first and only time I tried it, so first thing I did was check HD with my OS 10.4 disc and found out the HD was going bad in red letters.
The OS I have installed is from the one of the original 10.4 releases and it was a 5-pak, altho the installation on my my Pwrbks new HD drive was about the 9th installation with that 5-pak.
I'm always amazed how I can keep doing installations beyond the 5-pak limit it was sold as.
THe HD has passed no problem and I'm the very conscientious type when it comes to repair permissions before and after any Apple updates and with most of my application installations.
I've had the computer for about a year now but the problem only began a few months back. For while usiing the option key when powering on would by-pass the problem but after while it didn't.
So, now I've come to discover, that it that after twto times of powering on an then off, it will boot ok on third time, tho currently it is powring on first time every time with no problem. :--)
Querky issue that I can live with.
My wife 12" ibook has a design flaw with the bluetooth/wifi card or at least its connector to mother board.
It has begun to also take three or four power ons before it will finally boot.
It has additional quek tho, where I will ask me to "mac-boot" and then I get the flashing "?" folder alternating with mac icon. So pwr off and it always boots find after this flashing episode.
We have left the wifi/bluetooth turned-off and will probably have the card removed and get a USB wifi.
Thx again for your supportive reply...
I wonder if it something with these older macs and the new updates that cause this problem?
Ran

MSI X99S SLI PLUS - Win 8.1 (UEFI) cold boot problem

Hello,
maybe someone can help me
I did upgrade from Win 7 to Win 8.1 on weekend
Now to my problem :
Since the upgrade I have cold-start problems, the first start of the system to hang when blue Win Logo .
A new boot goes without problems .
System is 100% stable, with Win 7 I had not this problem .
MSI Fastboot and fastboot I tryed with disabled.
Problem is with and without OC

with a DIMM I'll still try
with 8 DIMM's
mainly I have the problem when the computer is longer energized
if the computer is only 5-10 minutes without power, it will boot normally
with Windows 7 and without UEFI I had not these problems

Poll: Do you have cold boot problem with SB X-FI Fatal1t

Similar Messages

Maybe you are looking for