POLL: How long does it take your Translator Widget to translate?

My translator widget keeps bugging out on me. I can't figure out if it's a localized issue, or something remote (on Systran's end).
How long does your translator widget take to translate something?
Under a clean install, the translator widget works almost instantly as I type, and when I click the switch button it instantly switches the lanugages and their text around.
After only a short time, the widget starts to get pissy, and takes about 15 seconds after I've typed something and pressed the switch button to output anything.
What is everyone else dealing with?

You wrote: "And what should be done if you do not change the translation, and have a broadband Fios connection and it still takes forever to translate a sentence of no more than 5 words?"Try Babel Fish.
I frankly suspect this has a lot more to do with the performance of the servers SysTran is devoting to users of the Translation widget than a problem with the widget itself. SysTran may also be looking at the incoming IP address and if you're sending multiple requests, your priority may go down as your number of requests increases.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Similar Messages

  • How long does it take your mid 2010 iMac to boot after shutdown?

    My imac has suddenly become alot slower upon boot up and i actually just bought this computer a few days ago. it's taking about 30+ seconds to boot up after a shutdown is that normal?

    If you had a black out you may have damaged the machine if it wasn't hooked up to a battery backup. I would recommend you contact AppleCare (the number is in your owners manual) and see if they can help. One thing I would strongly advise is investing in a decent battery backup system, this will help with power surges and if you are in front of the computer when you have a black out provide enough battery power to do an orderly shutdown. If you get one that connects via USB to your computer you can also set some preferences such as what to do when the power comes back on.

  • "How long does it take to do a dist-upgrade on your distro?"

    Yesterday there was a question in the USALUG.org "How long does it take to do a dist-upgrade on your distro?"
    This question was a good question, so I decide to make the ultimate test. I have a lot of computers standing here around, and remembered that on one of them was have already Archlinux installation. I was right, when I booted, the system check said me, that the system was 253 days not checked anymore. I got so excited that I forgot to check was it one of my 0.7.2 Gimmick or 0.8 Voodoo installations.
    The Computer
    Dell OptiPlex GX110
    [jada@arch-02 ~]$ cat /proc/cpuinfo
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 6
    model : 8
    model name : Pentium III (Coppermine)
    stepping : 6
    cpu MHz : 797.452
    cache size : 256 KB
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 2
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p se36 mmx fxsr sse up
    bogomips : 1596.45
    clflush size : 32
    [jada@arch-02 ~]$
    I used the following command for the update
    $ time pacman -Syu
    The Test
    first update pacman
    [root@arch-02 jada]# pacman -Syu
    warning: current locale is invalid; using default "C" locale
    :: Synchronizing package databases...
    core 23.8K 80.0K/s 00:00:00 [#####################] 100%
    extra 310.5K 292.3K/s 00:00:01 [#####################] 100%
    community 341.0K 295.8K/s 00:00:01 [#####################] 100%
    :: Starting full system upgrade...
    :: Replace mktemp with core/coreutils? [Y/n] y
    :: Replace mpg321 with extra/mpg123? [Y/n] y
    warning: bind: forcing upgrade to version 9.4.2-1
    warning: cpufrequtils: forcing upgrade to version 002-3
    warning: dnsutils: forcing upgrade to version 9.4.2-1
    warning: flex: forcing upgrade to version 2.5.33-4
    warning: opera: forcing upgrade to version 9.25-2
    :: pacman has detected a newer version of the "pacman" package.
    :: It is recommended that you allow pacman to upgrade itself
    :: first, then you can re-run the operation with the newer version.
    :: Upgrade pacman first? [Y/n] y
    resolving dependencies... done.
    looking for inter-conflicts... done.
    Targets: libarchive-2.4.11-1 libdownload-1.3-1 pacman-3.1.1-1
    Total Package Size: 1.19 MB
    Proceed with installation? [Y/n] y
    :: Retrieving packages from core...
    libarchive 314.8K 253.4K/s 00:00:01 [#####################] 100%
    libdownload 49.4K 97.9K/s 00:00:01 [#####################] 100%
    pacman 855.2K 460.4K/s 00:00:02 [#####################] 100%
    checking package integrity... done.
    cleaning up... done.
    (3/3) checking for file conflicts [#####################] 100%
    (1/3) upgrading libarchive [#####################] 100%
    (2/3) upgrading libdownload [#####################] 100%
    (3/3) upgrading pacman [#####################] 100%
    >>> The makepkg.conf syntax has changed, please note the new format
    >>> when merging the pacnew file with your old configuration.
    >>>
    >>> The pacman.conf default file has changed. Please update your
    >>> config to use the single mirrorlist, and any additional files
    >>> in /etc/pacman.d/ (core, extra, etc.) can be deleted.
    >>>
    >>> The location of sync DBs has moved from /var/lib/pacman/ to
    >>> /var/lib/pacman/sync/ for several reasons. To delete older
    >>> DBs, please run pacman -Sc and follow the instructions.
    >>> You will also have to run pacman -Sy to refresh the sync DBs.
    >>>
    >>> abs is no longer included; please install the 'abs' package
    >>> to use abs. You may need to edit abs.conf to re-enable repos.
    [root@arch-02 jada]#
    restart pacman 3.1.1 and update the packages
    [root@arch-02 jada]# time pacman -Syu
    :: Synchronizing package databases...
    core 23.8K 80.3K/s 00:00:00 [#####################] 100%
    extra 310.5K 261.1K/s 00:00:01 [#####################] 100%
    community 341.0K 302.5K/s 00:00:01 [#####################] 100%
    :: Starting full system upgrade...
    :: Replace mktemp with core/coreutils? [Y/n] y
    :: Replace mpg321 with extra/mpg123? [Y/n] y
    warning: bind: forcing upgrade to version 9.4.2-1
    warning: cpufrequtils: forcing upgrade to version 002-3
    warning: dnsutils: forcing upgrade to version 9.4.2-1
    warning: flex: forcing upgrade to version 2.5.33-4
    warning: opera: forcing upgrade to version 9.25-2
    resolving dependencies...
    warning: dependency cycle detected:
    warning: bash will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: readline will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: ncurses will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: db will be installed before its coreutils dependency
    looking for inter-conflicts...
    Remove: mktemp mpg321
    Total Removed Size: 0.08 MB
    Targets: ncurses-5.6-6 readline-5.2-7 bash-3.2.033-2
    kernel-headers-2.6.23.1-2 tzdata-2007k-1 glibc-2.7-7 attr-2.4.39-2
    acl-2.2.45-2 cracklib-2.8.10-5 gcc-libs-4.2.3-3 db-4.6.21-2
    pam-0.99.9.0-2 shadow-4.0.18.2-2 coreutils-6.10-2 libtool-1.5.26-1
    mpg123-1.2.0-1 fontconfig-2.5.0-1 zlib-1.2.3-4 libpng-1.2.24-1
    cairo-1.4.14-1 libtasn1-1.3-1 lzo2-2.02-3 libgpg-error-1.6-1
    libgcrypt-1.4.0-1.1 opencdk-0.6.6-1 gnutls-2.0.4-1 libcups-1.3.5-1
    pcre-7.6-2 glib2-2.14.5-1 pango-1.18.4-1 gtk2-2.12.7-1
    binutils-2.18-5 gmp-4.2.2-2 mpfr-2.3.1-1 gcc-4.2.3-1
    glproto-1.4.9-1 libgl-7.0.3rc1-1 mesa-7.0.3rc1-1 acroread-8.1.2-1
    dialog-1.1_20071028-1 pciutils-2.2.8-3 alsa-utils-1.0.15-2
    e2fsprogs-1.40.4-1 apr-1.2.12-1 gdbm-1.8.3-5 apr-util-1.2.12-1
    openssl-0.9.8g-2 apache-2.2.8-1 jack-audio-connection-kit-0.109.0-1
    kde-common-3.5.8-3 libxmu-1.0.4-1 qt3-3.3.8-6.1 arts-1.5.8-2
    diffutils-2.8.1-5 gawk-3.1.6-2 m4-1.4.10-3 autoconf-2.61-3
    perl-5.8.8-9 automake-1.10.1-2 filesystem-2007.11-6 avahi-0.6.20-3
    bftpd-2.1-1 bin86-0.16.17-3 dnsutils-9.4.2-1 bind-9.4.2-1
    bison-2.3-4 bluez-libs-3.24-1 libusb-0.1.12-3 bluez-utils-3.24-2
    bridge-utils-1.2-2 bzip2-1.0.4-3 cairomm-1.4.6-1 cmake-2.4.8-1
    cpio-2.9-3 sysfsutils-2.1.0-4 cpufrequtils-002-3
    device-mapper-1.02.24-1 popt-1.10.6-3 cryptsetup-1.0.5-5
    csup-20060318-5 cups-1.3.5-1 curl-7.18.0-1 dbus-qt3-0.62-3
    dcron-3.2-3 dhcpcd-3.2.0-1 dmapi-2.2.8-3 libxml2-2.6.31-1
    docbook-xsl-1.73.2-1 dosfstools-2.11-2 dvd+rw-tools-7.0-4 ed-0.8-3
    enlightenment-0.16.8.11-1 gnome-desktop-2.20.3-1 eog-2.20.4-1
    libidl2-0.8.10-1 mozilla-common-1.1-2 xulrunner-1.8.1.11-1
    epiphany-2.20.3-1 eventlog-0.2.5-2 ghostscript-8.61-1
    gnome-keyring-2.20.3-1 libsasl-2.1.22-5 libldap-2.3.39-2
    smbclient-3.0.28A-1 gnome-vfs-2.20.1-1 libdjvu-3.5.20-1
    poppler-0.6.3-1 poppler-glib-0.6.3-1 evince-2.20.2-1 evms-2.5.5-5
    libsoup-2.2.104-1 evolution-data-server-1.12.3-1 exiv2-0.15-1
    faad2-2.6-1 grep-2.5.3-3 sed-4.1.5-3 fakeroot-1.9.2-1 fbset-2.1-2
    file-4.23-1 file-roller-2.20.3-1 findutils-4.2.32-1
    firefox-2.0.0.12-1 flashplugin-9.0.115.0-2 flex-2.5.33-4
    font-bitstream-speedo-1.0.0-4 font-misc-ethiopic-1.0.0-4
    font-misc-meltho-1.0.0-4 freeglut-2.4.0-3 freetype1-1.3.1-4
    glib-1.2.10-7 gtk-1.2.10-8 imlib-1.9.15-4 libstroke-0.5.1-2
    fvwm-2.4.20-2 gail-1.20.2-1 gc-7.0-2 gdb-6.7.1-1
    gtksourceview2-2.0.2-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
    libgnomeprintui-2.18.2-1 python-2.5.1-5 pygobject-2.14.1-1
    pygtk-2.12.1-1 gedit-2.20.4-1 gen-init-cpio-2.6.17-3
    gettext-0.17-1 librsvg-2.20.0-1 gimp-2.4.4-1 gkrellm-2.3.1-2
    glibmm-2.14.2-1 gmime-2.2.16-1 gnokii-0.6.22-3
    gnome-menus-2.20.3-1 libwnck-2.20.3-1 gnome-panel-2.20.3-1
    gstreamer0.10-0.10.15-1 gstreamer0.10-base-0.10.15-1
    gstreamer0.10-alsa-0.10.15-1 gucharmap-1.10.2-1 libgtop-2.20.1-1
    gnome-applets-2.20.1-1 metacity-2.20.2-1 libbeagle-0.3.0-3
    nautilus-2.20.0-4 gnome-control-center-2.20.3-1
    gnome-python-2.20.1-1 gnome-python-desktop-2.20.0-3 guile-1.8.3-1
    gnome-games-2.20.3-1 gnome-power-manager-2.20.2-1
    tcp_wrappers-7.6-8 gnome-session-2.20.3-1 gtkmm-2.12.3-1
    gnome-system-monitor-2.20.2-1 vte-0.16.12-1 gnome-terminal-2.18.4-1
    gnome-utils-2.20.0.1-2 gnupg-1.4.8-1 libassuan-1.0.4-1
    gnupg2-2.0.8-1 gpgme-1.1.6-1 gpm-1.20.1-7 groff-1.19.2-4
    grub-0.97-9 gstreamer0.10-cdparanoia-0.10.15-1
    gstreamer0.10-gnomevfs-0.10.15-1 gstreamer0.10-ogg-0.10.15-1
    gstreamer0.10-vorbis-0.10.15-1 gtkhtml-3.16.3-1 gutenprint-5.0.2-1
    vi-7.1.228-1 vim-7.1.228-1 gvim-7.1.228-1 gzip-1.3.12-4
    hal-info-0.20071212-1 hdparm-7.7-3 usbutils-0.73-5 wget-1.11-1
    hwd-5.3.2-1 hwdetect-0.9-1 icewm-1.2.35-1 ifenslave-1.1.0-3
    imagemagick-6.3.8.0-1 intltool-0.37.0-1 iproute-070710-3
    iptables-1.3.8-2 iputils-20070202-4 isdn4k-utils-3.2p1-3
    jfsutils-1.1.12-2 jre-6u3-2 kbd-1.12.20070827-2 kdelibs-3.5.8-4
    lm_sensors-3.0.1-1 xorg-xauth-1.0.2-1 kdebase-3.5.8-3
    qscintilla-qt3-1.7.1-2 kdebindings-3.5.8-2 libgphoto2-2.4.0-4
    poppler-qt3-0.6.3-1 kdegraphics-3.5.8-3 sqlite3-3.5.6-1
    libopensync-0.34-1 kdepim-3.5.8-2 klibc-1.5-3 klibc-extras-2.3-1
    klibc-udev-116-2 klibc-module-init-tools-3.2.2-1
    mkinitcpio-0.5.17-2 module-init-tools-3.2.2-5 kernel26-2.6.24.1-2
    less-418-1 lftp-3.6.3-1 libao-0.8.8-2 orbit2-2.14.12-1
    libbonobo-2.20.3-1 libcdio-0.79-1 libelf-0.8.10-3 libevent-1.3d-2
    libgdiplus-1.2.6-1 libmikmod-3.1.12-1 libmysqlclient-5.0.51-2
    libpcap-0.9.8-2 libsamplerate-0.1.2-4 libtar-1.2.11-3
    libxfont-1.3.1-2 licenses-2.3-1 lilo-22.8-2 links-2.1pre33-1
    logrotate-3.7.5-1 lua-5.1.3-1 lvm2-2.02.33-1 mailx-8.1.1-5
    make-3.81-3 man-1.6f-2 man-pages-2.77-1 mdadm-2.6.4-1
    mono-1.2.6-1 mutt-1.5.17-4 mysql-clients-5.0.51-3 mysql-5.0.51-3
    nano-2.0.7-1 net-tools-1.60-13 netkit-ftp-0.17-4
    netkit-telnet-0.17-7 nfsidmap-0.20-2 portmap-6.0-2
    nfs-utils-1.1.0-3 ngrep-1.45-4 nmap-4.53-1 ntp-4.2.4p4-4
    openssh-4.7p1-6 openvpn-2.0.9-3 opera-9.25-2 orca-2.20.3-1
    patch-2.5.4-4 pcmciautils-014-3 php-5.2.5-3 pilot-link-0.12.3-1
    pine-4.64-4 pkgconfig-0.22-3 procps-3.2.7-4 libx86-0.99-1
    vbetool-1.0-2 pm-utils-0.99.4-1 qt-4.3.3-4 poppler-qt-0.6.3-1
    postgresql-libs-8.2.6-1 postgresql-8.2.6-1 ppp-2.4.4-6
    procinfo-19-2 psmisc-22.6-1 qca-2.0.0.svn744387-1.1 qca-qt3-1.0-1
    qca-tls-1.0-5 qscintilla-2.1-3 reiserfsprogs-3.6.20-3
    rp-pppoe-3.8-2 rsync-2.6.9-4 samba-3.0.28A-1 screen-4.0.3-5
    seahorse-2.20.3-1 shared-mime-info-0.23-1 sudo-1.6.9p12-1
    sysklogd-1.5-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
    sysvinit-2.86-4 taglib-1.4.0.svn744384-1 tar-1.19-2 tcl-8.5.1-1
    tcpdump-3.9.8-1 tcsh-6.15.01-1 thunderbird-2.0.0.9-2 tk-8.5.1-1
    totem-plparser-2.21.91-1 totem-2.20.1-3 ttf-dejavu-2.23-1
    udev-116-3 unichrome-dri-7.0.3rc1-1 unzip-5.52-3
    vorbis-tools-1.1.1-7 which-2.19-2 whois-4.7.24-1
    wireless_tools-29-2 wireshark-0.99.7-1 wpa_supplicant-0.5.9-1
    xaw3d-1.5-4 xchat-2.8.4-2 xf86-input-evdev-1.2.0-1
    xf86-input-joystick-1.3.1-1 xf86-video-ati-6.7.197-2
    xf86-video-mga-1.9.100-2 xf86-video-nv-2.1.7-1
    xf86-video-s3virge-1.9.1-9 xf86-video-savage-2.1.3-2
    xf86-video-sis-0.9.4-2 xfsprogs-2.9.4-2 xfsdump-2.2.46-3
    wavpack-4.41.0-3 xine-lib-1.1.10-1 xinetd-2.3.14-3
    xkeyboard-config-1.1-1 xmms-1.2.11-1 xorg-server-1.4.0.90-6
    xorg-xinit-1.0.7-3 xscreensaver-5.04-2 yelp-2.20.0-3
    zenity-2.20.1-1
    Total Download Size: 743.90 MB
    Total Installed Size: 748.87 MB
    Proceed with installation? [Y/n]
    Proceed with installation? [Y/n] y
    :: Retrieving packages from core...
    ncurses-5.6-6-i686 1738.2K 518.0K/s 00:00:03 [#####################] 100%
    readline-5.2-7-i686 271.5K 228.3K/s 00:00:01 [#####################] 100%
    bash-3.2.033-2-i686 407.1K 299.1K/s 00:00:01 [#####################] 100%
    kernel-headers-2.6.2... 621.6K 376.8K/s 00:00:02 [#####################] 100%
    tzdata-2007k-1-i686 610.7K 329.0K/s 00:00:02 [#####################] 100%
    xorg-server-1.4.0.90... 7.4M 659.0K/s 00:00:11 [#####################] 100%
    xorg-xinit-1.0.7-3-i686 14.4K 56.9K/s 00:00:00 [#####################] 100%
    xscreensaver-5.04-2-... 8.0M 655.2K/s 00:00:13 [#####################] 100%
    yelp-2.20.0-3-i686 603.4K 356.7K/s 00:00:02 [#####################] 100%
    zenity-2.20.1-1-i686 1896.3K 546.6K/s 00:00:03 [#####################] 100%
    :: Retrieving packages from community...
    freetype1-1.3.1-4 119.9K 129.5K/s 00:00:01 [#####################] 100%
    gkrellm-2.3.1-2 724.3K 411.1K/s 00:00:02 [#####################] 100%
    xmms-1.2.11-1 1945.1K 557.0K/s 00:00:03 [#####################] 100%
    checking package integrity...
    (349/349) checking for file conflicts [#####################] 100%
    ( 1/349) upgrading ncurses [#####################] 100%
    ( 2/349) upgrading readline [#####################] 100%
    ( 3/349) upgrading bash [#####################] 100%
    ( 4/349) upgrading kernel-headers [#####################] 100%
    ( 5/349) upgrading tzdata [#####################] 100%
    ( 6/349) upgrading glibc [#####################] 100%
    (340/349) installing wavpack [#####################] 100%
    (341/349) upgrading xine-lib [#####################] 100%
    (342/349) upgrading xinetd [#####################] 100%
    (343/349) upgrading xkeyboard-config [#####################] 100%
    (344/349) upgrading xmms [#####################] 100%
    (345/349) upgrading xorg-server [#####################] 100%
    :: Could not detect nvidia-utils on system
    :: Will attempt to use built-in libwfb
    (346/349) upgrading xorg-xinit [#####################] 100%
    (347/349) upgrading xscreensaver [#####################] 100%
    (348/349) upgrading yelp [#####################] 100%
    (349/349) upgrading zenity [#####################] 100%
    real 56m46.062s
    user 4m25.013s
    sys 1m46.520s
    [root@arch-02 jada]#
    And for your tread question.
    How long does it take to do a dist-upgrade on your distro?
    one hour
    real    56m46.062s
    user    4m25.013s
    sys     1m46.520s
    After reboot the system loads all new applications with out any problem. Later I replaced the intel-video driver "xf86-video-i810 1.7.4-6" with the driver xf86-video-intel 2.2.0-2. No problems at all.
    Archlinux rocks

    JaDa wrote:Archlinux rocks
    definitely. By contrast, here's a regular upgrade on my debian box -- out of the blue it's having some problem with one of the packages, and it's turning into a regular recursive nightmare.
    root@moe:~ # apt-get upgrade
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    You might want to run 'apt-get -f install' to correct these.
    The following packages have unmet dependencies.
    E: Unmet dependencies. Try using -f.
    root@moe:~ # apt-get -f install
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    Correcting dependencies...Done
    The following extra packages will be installed:
    exim4-base exim4-daemon-light
    Suggested packages:
    exim4-doc-html exim4-doc-info eximon4 libmail-spf-query-perl
    The following packages will be upgraded:
    exim4-base exim4-daemon-light
    2 upgraded, 0 newly installed, 0 to remove and 64 not upgraded.
    1 not fully installed or removed.
    Need to get 0B/1391kB of archives.
    After unpacking 8192B of additional disk space will be used.
    Do you want to continue [Y/n]?
    Preconfiguring packages ...
    dpkg: exim4-daemon-light: dependency problems, but removing anyway as you request:
    exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
    Package exim4-daemon-light is to be removed.
    Package exim4-daemon-heavy is not installed.
    Package exim4-daemon-custom is not installed.
    dpkg: error processing exim4-daemon-light (--remove):
    Package is in a very bad inconsistent state - you should
    reinstall it before attempting a removal.
    Errors were encountered while processing:
    exim4-daemon-light
    [ Rootkit Hunter version 1.3.0 ]
    File updated: searched for 152 files, found 131
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    root@moe:~ # apt-get install exim4-daemon-light
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    You might want to run 'apt-get -f install' to correct these:
    The following packages have unmet dependencies.
    exim4-daemon-light: Depends: exim4-base (>= 4.69) but 4.68-2 is to be installed
    E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
    root@moe:~ #
    It's so "delicate" and temperamental compared to the no-nonsense, straightforward approach of Arch. If one little thing is off, the entire system has a hissy-fit and won't do anything until you hunt the internet high and low searching for a solution, encountering all the debian hawks along the way who are ready to rip your head off at the first suggestion that debian isn't directly from god and could have a problem. Imo, Arch is the best linx distro hands down. Nothing else even comes close.

  • How long does it take for your iCloud storage to incase once you have purchased additional space?

    Hi I have just purchased additional iCloud space, how long does it take before I can access this additional storage space?

    Wiki activity has not been showing up on the Activities tab of our Profiles for some time now. This is a known issue that they are working on. I don't know if our staticstics is being updated. You new article looks fine, so it must have published. Your
    profile still shows 16 articles. I will try to check if our statistics are being updated, but it could be the same issue we already know about (no Wiki activities in profiles).
    Richard Mueller - MVP Directory Services

  • How long does it take for a Macbook Pro to be shipped to your home?

    How long does it take for a Macbook Pro to be shipped to your home?

    Depends on the method of shipping. Normal FedEx takes 5-7 days. You would have to pay extra for 2-day or overnight.

  • HT4060 How long does it take to charge your ipad once the battery is all gone?

    How long does it take to charge your ipad 4th generation with retina display  once the battery is all gone?

    About 5 hours using the 12W charger that came with it.

  • How long does it take to back up your iphone?  it was moving along great then someone texted me and i dont know if it is still backing up...

    how long does it take to back up your iphone...it was moving along great and then someone texted me and it doesnt seem to be moving....the little circle by my Tammys Iphone is turning....

    Only you can decide. Read this article and decide which one is best for you:
    http://support.apple.com/kb/HT5262
    Cheers,
    GB

  • How long does it take for apply to activate your iPhone number for imessage?

    I restored my iphone and now it won't let me iMessage anyone and it says it's waiting for activation.  How long does it take for apple to activate my phone number for imessage?

    Should happen almost immediately. Read here:
    http://support.apple.com/kb/ts4268

  • How long does it take for them to review your proof of purchase?

    I need a replacement for my iPod mini, and even though my Apple account information clearly states that it is still covered under the one-year warranty, they requested that I fax them a proof of purchase. I finally managed to get a credit card printout from Best Buy and I just faxed it to them earlier today, but my online repair status still says "pending review of proof of purchase." How long does it take for Apple to review the proof of purchase? Time is running out and my warranty expires on July 6th.

    Was this resolved for you? I have a similar issue.

  • Should your ipad be off when charging and how long does it take

    Should ipad be on or off when charging and how long does it take?

    scgirl195 wrote:
    Should ipad be on or off?
    You can turn it off and charge it or turn it on  and charge it. No need to turn it off actually.
    scgirl195 wrote:
    how long does it take?
    It depends on the charge level before start charging.

  • How long does it take to get my X61 checked from water spill?

    Hi,
    I had spilled some water into my X61 yesterday.
    Though I instantly shut it down and try to clean, I was too stupid to try to boot it in ten minutes.
    Not sure if it is "OK" right now....
    Does anyone have the same experience?
    Could you share how long does it take you to have your laptop shipped and checked at lenovo repair center?
    Thanks a lot!

    do you have accidental damage warranty? if you don't then you will incur a hefty bill. The check up should not take more than 5 days including shipping, provided that no parts need to changed, if there is parts that are required, then depending on the parts availability, you could wait up to a month or two. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • HOW LONG DOES IT TAKE TO GET iPHOTO BOOK?

    I would like to order my first HARD COVER book and since I am not living in USA, my friend would bring the book back to Europe.
    But the only problem is that, she will be there only two days, so the book must be at the address, she will be living on 9th of February.
    When do I need to place the order? How long does it take to get the album?
    Thank you for your help.

    Can't say - no idea where it is going to or what will be going on them
    If it were me I'd say that the extra cost was a cheap insurance policy against external forces messing things up - but you make that decision
    Waiting three days to order and shipping ground rather than express will increase the chances of it not making it - probably still 95% + (guessing of course) that it will but every day you wait makes the chances less and not using the fastest shipping also increases the chances of failure
    If money is the issue then ordering today rather than Wed would be a good idea to me
    Good Luck
    LN

  • How long does it take to get my money back

    Okay...I bought an app which I didn't liked...it cost 3.99 ... Then I reported the app and they send me an email saying ::::Recently you indicated a problem with Photo Director-HD Pro -make picture slide show music video .......by using the report a problem with iTunes. This email confirms that you have been awarded a refund of 4.32 on this purchase.i bought the app on December26,2013 ..
    I have many questions
    How I'm getting my money back?
    How long does it take to get my money back?
    Do I even getting my money back or not?
    Please I need to know!!!! :'(

    I had a similar experience yesterday. The Apple email that I got said:
    "In five to seven business days, a credit of xx USD should be posted to the credit card that appears on the receipt for that purchase."
    Your email should have said the same.
     Cheers, Tom

  • How long does it take to get a refund from Apple?

    I returned my MacBook on the 6th or 7th day of having it, and paid the re-stocking fee, 2 weeks ago. Yet I still have no refund. How long does it take to get my refund?
    MacBook   Mac OS X (10.4.6)  

    Well it shouldn't take 2 weeks.
    Call Apple to find out what the status is on your refund or you can go to the Apple store and find out what's going on in person.
    Just curious, but why did you return your MacBook?
    You should give in another try!
    Sam

  • How long does it take for iCloud to sync to my devices?

    I just discovered that I could drag Word documents onto the iCloud web site from my computer. Pretty handy trick.  Drag and drop should be how this works.  So to test it I dragged a document from my My Documents Folder onto the iCloud web site in my browser (I wish my company would update to Windows 7 so it would be easier to align windows on screen).  It appeared to upload just fine.  So I went to my iPhone and opened Pages to see how badly the file translated from Word 2007 to Pages for iPhone.  And no document.
    I have waited about 20 minutes so far. Am I being to impatient?  Just how long does it take for iCloud to promulgate my documents to my iDevices?  I am hopefully getting an iPad for Xmas so I need to get this worked out before I actually need this for work.

    It actually goes pretty fast once you are on a WiFi connection.  I found an open WiFi connection at Starbucks and when i got back to my desk the files were all there on the web site.  I fond the Use Cellular connection to sync in settings and decided that I didn't need to sync my docs all the time so I will just wait to connect when I can get to a WiFi.
    Now I just need to figure out how to sync my contacts.  iCloud doesn't seem to play nice with Google contacts when they are on an Exchange connection.

Maybe you are looking for

  • Does 9.3.1 really *require* UTF-8?

    The "Installation Start Here" manual for release 9.3.1 makes a broad statement that databases must use the UTF-8 character set (see section entitled "Preparing Databases"). Has anyone out there successfully installed System 9 using non-UTF-8 Oracle r

  • Deploy Live Office XI 3.1 on Websphere 6.1

    Hi everybody! I have a problem with Live Office XI 3.1 on a system that uses a Websphere 6.1 AS. If I point (from connect panel of LiveOffice) to the default Tomcat AS I'm able to use LiveOffice and connect to enterprise (BOE XI3.1) but, if I use Web

  • Function Module to create Outbound IDoc

    I have created a segment (ZSEGPRO), basic type (ZIDOCPRO) and message type (ZMSGPRO) to create a custom IDoc. Now I have to write a Function Module to create Outbound IDoc. I want to know what will be in Import, Export, Changing, Tables, Exceptions a

  • [SOLVED]JDBC Dynamic credentials problem

    Hello everyone. I have been trying to implement Steve Muench example 14 about JDBC Dynamic Credentials on my own web app., I am using Jdeveloper 10.1.3.2 and JSF/ADF. The thing is that the JDBC dynamic credential works well but when I enter a non-exi

  • Using an external editor

    I jumped from using iPhoto '06 to using iPhoto '11 and now I'm very confused. Before, if I 'Edited in external editor', I would do the changes in Elements, then simply Save there, and my changes were saved back to the Modified folder of my iPhoto Lib