Poll - Large ECC 6.0 system on Linux

Hello,
We are analyzing the option of switching from Windows 2008/Oracle platform on Linux and we would like to know if there are large ECC 6.0 systems productive on Linux?  We have regularly more than 5000 concurrent users in a system with a consistent .5 seconds response time. 
Could you please state the Linux distribution and DB that you are using and the size of productions system.
Thank you in advance for your help.

We run two ERP 6.0 (both around 1000 concurrent users) where the oracle database still resides on HP-UX with application servers on SLES11. We have a total of 8 application servers shared for both systems with 72gb memory and 25000 SAPS each. Response times are around 500ms.
Why do you consider moving from windows to linux? The main advantage of linux is the cheap and fast x86_64 hardware, but the same goes for windows. You should get roughly the same performance on both platforms.
Cheers Michael

Similar Messages

  • New ECC 6.0 system on z/OS - DB2 - good choice?

    Hi
       We are considering a new ECC 6.0 system on z/OS - DB2.  Any experiences with the advantages/disadvantages of this platform would be most helpful.
    Thanks in advance.
    Mike

    Omer certainly has more experience with DB2 for z/OS and running SAP on it. He has written lots of great articles on ittoolbox that have been really helpful. In response to his post:
    1. rdisp/wp_auto_restart is defaulted to zero, meaning that SAP will never automatically restart a work process. SAP note 101717 (which details how/why to change the default) says "The solution described here should only be used if all other options are exhausted since this is not an elimination of the actual cause of the problem but only a workaround.". I have not personally experienced needing to change this parameter from the default outside of DB2 for z/OS. It is recommended in the SAP for DB2 z/OS Admin Guide to set this parameter to the equivalent of 1 day in seconds. This would seem to acknowledge either a known and unfixed memory leak in DB2 for z/OS (up to and including v9), or is perhaps a precaution because of the 2 gig thread storage limit. As I stated before, it adds no value and causes useless reconnect information to be put into the SM21 system logs.
    2. I think perhaps our issue with extents is because our storage system was not setup from the beginning to enable extent constraint relief. Setting the secondary extent quantity to a sufficient size for each tablespace is certainly one way to ensure that extents don't become a problem. With over 70,000 tables in ECC 6.0, even trying to manage 1% of the tables this way could be quite time consuming. Setting ZPARM MGEXTSZ to the SAP recommended value of yes allows DB2 to use the sliding algorithm and make each additional secondary extent bigger and bigger. Even so, we've had surprises (and thanks to Murphy usually off-hours) where there was still plenty of space left on our DB2 volumes but the total number of extents for a particular dataset or the total extents on a non-full volume exceeded the maximum. All that really says is that SAP on DB2 for z/OS appears to require more careful storage monitoring than on other platforms. It does allow for more flexibility, however.
    3. Being able to manage individual tables and/or tablespaces is an advantage, though it does not come without the cost of additional overhead for the DBA. As for restoring and individual table, this is certainly possible but it would be best practice to work with SAP support to make sure all table dependencies are resolved and that data integrity is maintained when restoring an individual table. The DBA should not be expected to know about all of the table relationships with the 70,000 tables in ECC 6.0. That would seem to limit the advantages of an individual table restore.
    4 & 5. I don't have a lot of experience with virtual memory monitoring on z/OS, but I can understand why it would have vastly superior capabilities compared to other platforms. When memory is expensive (as in thousands of dollars per gigabyte) and when DB2 still has some components which are restricted to 2 gig, it absolutely makes sense to have very detailed tools to manage memory usage.
    Regarding sizing... I'm sure that mistakes are made quite often regardless of platform. It was exactly my point that it does not usually add significant cost to increase the resources on commodity hardware. My experience has been that commodity hardware vendors usually size the hardware too big anyway. Whether that is to allow some flexibility or simply to increase their sales, I am not sure. Contrast that to this recent success story for SAP on zSeries:
    http://www-01.ibm.com/software/success/cssdb.nsf/cs/STRD-7NGMA9?OpenDocument&Site=gicss67sap&cty=en_us
    "Colacem had to come up with more money for the upgrade - but IBM offered it to us at a price that we regard as very fair"
    This customer had to upgrade to a Z10 after their Z9 ran out of gas, right in the middle of their first SAP implementation. I can only guess that the additional cost was not insignificant.
    6. Thus far we have not experienced any strange problems with other databases and SAP, but we are using database versions that have been certified by SAP for 4+ years. In fairness though, we're not a huge implementation with individual tables in the terabytes.
    Being on a platform with a small percentage customers has its disadvantages in trying to get product changes made as well. As an example, where is the Adobe Document Services support for Linux on zSeries? I know of at least one other customer that wanted this. Although adobe is now available for other 64bit platforms that run SAP, it is still not available for Linux on zSeries.
    There is also the issue of third party SAP partners (Vertex, BSI, SAP's own WWI product) and the platforms they support. Very few support Linux for zSeries, so there will be additional commodity hardware servers in the datacenter. That results in the added complexity of supporting more platforms.
    The one area of concern I do have about running SAP on a non-zSeries platform is the quality of SAP support for other platforms. The zSeries SAP support team is phenomenal and I can't say we've gotten even close to the response times or the quality of answers for non-zSeries related OSS messages.
    All that said, I am just offering one person's experiences and opinions. Obviously I am not overly impressed with the value delivered vs the cost of zSeries.
    Brian

  • Is it possible to migrate data from a 4.6C system to an ECC 6.0 system?

    Hello all,
    We have an ECC6.0/Oracle 11g system which runs Finance, Purchasing and Payroll/HR for our own organisation.
    We also have another 4.6C/Oracle9 system where we run only Payroll for another organisation.
    This is a separate landscape (Dev / Test / Prod / DR) which runs on its own hardware.
    Clearly, this 4.6C system has to be upgraded in the next 12 months or so before it is out of maintenance.
    However, we are exploring whether it would be possible to migrate the data from the 4.6C system to our existing ECC6.0 system instead of upgrading the 4.6C system.
    In this way, we can decommission the 4.6C hardware and simplify our landscape.
    Has anyone undertaken a similar exercise who would be willing to share their experiences?
    Or does anyone have any opinions as to whether this would even be possible?
    Our initial thinking is that we would probably have to write our own conversion programs and/or possibly use LSMW but it's early days so any feedback is welcome.
    Regards...John

    Hi,
    However, we are exploring whether it would be possible to migrate the data from the 4.6C system to our existing ECC6.0 system instead of upgrading the 4.6C system.
    You can make of ALE/IDOCs technology to transfer the required data from 4.6C system to ECC 6.0 system. Here you will need to perform necessary mapping of the fields and perform required technical configuration. Later write ABAP codes to fetch and transfer data .
    Hope this answers your query.
    Regards,
    Deepak Kori

  • Transfer rules are not exist for ECC Quality source system in BI Dev

    Hi,
    I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data  I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
    When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
    only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
    Regards,
    chandra

    Hi Fayzrakhmanov
    Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
    The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
    Help on this would be appreciated.
    Thanks

  • How define ECC 6.0 system in smsy? Solution Manager 7.0 SP15

    Hi Colleagues,
    I have to define ECC 6.0 in my Solution Manager 7.0 SP15.
    At smsy transaction -> Landscape Components -> Systems I don't find name SAP ECC to create new system. So I created it on SAP ERP.
    My problem is when I go to create a logical component to assign my ECC system. So I go to transaction smst-> System Groups and Logical Components -> Logical components -> SAP ECC -> SAP ECC Server, I've created a Z New logical componets and at the right frame I am not able to assign my define system under SAP ERP. I get a pop-up "No system found for this product/main instance".
    Please could you help me?
    Thanks and Regards
    Raul

    Hi,
    The problem is solved.
    When I defined the system in smsy transaction, I made a mistake because I define it like a ERP 2005 and not a ECC 6.0, so in the next step when I want include this new system in a ECC 6.0 logical group, it wasn't able to find any ECC 6.0 system defined.
    Thanks, René for your reply.
    Regards

  • Asset Accounting in Upgrade from 4.5B to ECC 6.0 system.

    Hello
    We have recently upgraded from 4.5B system to ECC 6.0 system.This is a Technical Upgrade.
    We are getting errors when we post through transaction ASKB-Periodic Asset Posting.
    The errors are that Documents cannot be posted as the GL Account for the Depreciation area 20-Cost Depreciation is a Reconciliation account and cannot be posted directly.
    Could you please let me know the steps to be taken to ensure that the Asset Accounting is implemented correctly?
    Any help in this regard is highly appreciated.
    Awaiting your response!!
    Regards
    Shrutika

    Hi Shrutika
    It appears as is if there is some issue with the configuration of your GL / configuration of GL with AA. Please refer to the following [link|https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/asset+accounting]  on this site. This provides you excellent stuff on Asset Accounting.
    Regards
    Virendra Malik

  • How to find repairs done ( through access key)  in SAP ECC 6.0 system

    Hi Experts,
    I have to find the Repairs ( ie standard code is edited with access key ) done in my SAP ECC 6.0 system. I want to find out the repairs which was done my some developer using the access key and also want to segregate the ones which were done through the OSS notes and support packages. Is there any table or report i can use in the sytem to view this details. Please let know at the earliest.
    Thanks,
    Murali.

    Access Key Tables - ADIRACCESS
    OSS Notes - TCODE SNOTE.

  • How to work with file system in linux within a JSF app?

    I use this line in my backing bean to log some events:
    FileHandler fhxml = new FileHandler("../webapps/MyWebApp/Log/MyWebAppLog.xml", append);
    fhxml.setFormatter(new XMLFormatter());That works fine in windows but when I deploy it in my Tomcat 6 in linux It doesn't work. How can I work with file system in linux?

    You should never use relative paths to access the filesystem. The path would be relative to the current working directory which is not per se the same in all environments. To convert a relative web path to an absolute file system path, you need ServletContext#getRealPath(). Use this absolute file system path in the java.io stuff. In a JSF application on top of Servlet API you can get the underlying ServletContext by ExternalContext#getContext().
    Alternatively, if the file is located in one of the default paths of the classpath or if its path is added to the classpath, you can also just use ExternalContext#getResource() or even #getResourceAsStream() using just the file name.

  • Facing challenges during creation of replica of .IDF file/Pdf output from 4.7 system into of Adobe forms in ECC 6.0 system

    Facing challenges during creation of replica of .IDF file/Pdf output from 4.7 system into of Adobe forms in ECC 6.0 system.
    If anybody has easy way to make those forms...
    Please suggest...

    Hi Shabeer,
    the first thing is that you are running on a very very low RAM.
    For ECC 6.0 with dual stack SAP System to run you should have atleast 4 GB of RAM.
    For your Dispatcher issue kindly check the status of your Oracle database and the connection from SAP To Database.
    You can check the oracle status using brtools utility.
    Regards,
    Prem

  • ERROR in ADD-ON conflict phase while upgrading ECC 6.0 system

    Hi all,
    I am having ECC 6.0 system and am upgrading its SAP-APPL component to 603 patch level 03. I was having SAP-APPL 603 but at patch level 0, i checked for all dependencies and defined the queue in SPAM and it showed all green (OK) for SAP-APPL and so i started but i faced error in add-on coflict phase. It said CRT needed for ADD-ON FICAX release 603. I searched alot but i cant find it on market place. This conflict occured for SAP-APPL 603 patch level 01 it said either include CRT as mentioned above or remove SAP-APPL 60301. Please help me out.

    The conflict check detected conflicts between the Add-On FI-CAX release 603 and the OCS Package SAPKH60301.
    The conflict check detected conflicts between the Add-On FI-CAX release 603 and the OCS Package SAPKH60302.
    The conflict check detected conflicts between the Add-On FI-CAX release 603 and the OCS Package SAPKH60303.
    Check the support packs of components FI-CAX on Service Market place, I think FI-CAX is dependant on SAPKH603301 and others so you can check the import condidtions of FI-CAX on service marketplace and update FI-CAX first then only you would be able to update patch of SAPKH60301
    Regards
    Subhash

  • How to connect one ECC 6.0  system to two BW ssytems.

    Hello all,
    I am trying to connect one ECC 6.0 systems to two different BW systems. The BW systems have two different logic names.
    I tried to find an answer in the threads , but could not able to find the steps. they were talking about the notes which fixes for the deltas. but I am not even able to connect the systems at all to implement that notes.
    Please give me the steps how to connect to an another BW2 system. The connection between ECC and BW1 ia working fine.
    Thanks,

    The error message is .
    Source system cannot use any of the proposed connection names
    Message no. RSAR362
    Diagnosis
    Every connection to a source system is named using a unique two-digit identifier. Source system LOGTST100 does not accept any of the proposed values.
    The last proposed value was BB.
    System Response
    Source system has not been connected.
    Procedure
    If you want to recreate the source system from BI information, then you can only use a single value, namely BB, because the connection already has this name in BI.
    Delete the existing connections in the source system or contact a BI consultant.

  • Enhance standard function module in ECC 5.0 System

    Hi All,
    My requirement is to add the custome fields in the standard screen.there is no screen exit for this screen.
    The screen is calling by using the standard function module CALL_SCREEN_HU_DISPLAY
    Iam working on ECC 5.0 System, Is it possisble to enhance the standard function module and add custome fields.
    Please let me know if any suggestions.
    Thanks & Regards,
    Nagendra

    Hi Reddy,
    Thanks for the reply..
    Can u please give the steps how to create implicit enhancement in function modules.
    Thanks & Regards,
    Nagendra

  • Transfer class and characteristics data from 3.1i system to ECC 6.0 system

    I have to develop a program to transfer all the classes and characteristics( tcode cl01 and ct04)  in a 3.1i system to an ECC 6.0 system.
    I initially planned to use FMs BAPI_CLASS_GETDETAIL to read from 3.1i and BAPI_CLASS_CREATE to load in ECC 6.0.
    But then I realized that BAPI_CLASS_GETDETAIL does not exist in 3.1i system.
    Could anyone please tell me how to transfer the class and characteristics data from 3.1i to ECC 6.0. What approach and FMs are to be used.
    Thanks,
    Karthik

    Thanks for the reply Madhu.
    We are trying the ALE way, using BD91 and BD92. This way seems to be easier as there is no need to extract data to files.
    IDoc is successfuly sent from the 3.1i system but we are not able to see it in ECC 6.0 system.
    We are checking up the settings.
    Would be very useful if you can provide some more details about the settings to be done.
    Thanks,
    Karthik

  • Maximum Nr of Roles in a SAP ECC 6.0 System

    Hi,
    How many roles maximum could be assigned to one user in a SAP ECC 6.0 System?
    In case some single roles are assigned several times to the same user ( because one single role belongs to the several composite roles) ..then will be this role count only 1 time?
    Thanks,
    FedeX

    > can I find this note in SDN?
    Notes are to be found in the SAP service marketplace.
    > the secoond part of my question would interest to me..
    > if the profile appears 2 times...it will count as 1 or as 2.
    If the role appears twice in the user master record and PFCG_TIME_DEPENDENCY runs regularly the profile should appear (and count) only once.

  • Client Copy Error on ECC 6.0 System

    Hello,
    While doing client copy on ECC 6.0 system for Exp 100 to 110... We have check the log in SCC3 status is " Completed with Dictionary Errors".
    Im getting below error...
    Target Client
    110
    Source Client (incl. Auth.)
    100
    Source Client User Master
    100
    Copy Type
    Local Copy
    Profile
    SAP_ALL
    Status
    Completed w. Dictionary Errors
    User
    SAP*
    Start on
    02.05.2008 / 12:43:06
    Last Entry on
    02.05.2008 / 15:15:24
    Statistics for this Run
    - No. of Tables
    52592 of     54109
    - Deleted Lines
    8938299
    - Copied Lines
    8935238
    Warnings and Errors
    Table Name
    Component
    Package
    A001
    SD-MD-CM
    DDIC Error        (See SE14)
    A004
    SD-MD-CM
    DDIC Error        (See SE14)
    A005
    SD-MD-CM
    DDIC Error        (See SE14)
    A006
    SD-MD-CM
    DDIC Error        (See SE14)
    A007
    SD-MD-CM
    DDIC Error        (See SE14)
    A009
    SD-MD-CM
    DDIC Error        (See SE14)
    A010
    SD-MD-CM
    DDIC Error        (See SE14)
    A012
    SD-MD-CM
    DDIC Error        (See SE14)
    A015
    SD-MD-CM
    DDIC Error        (See SE14)
    A016
    SD-MD-CM
    DDIC Error        (See SE14)
    A017
    SD-MD-CM
    DDIC Error        (See SE14)
    A018
    SD-MD-CM
    DDIC Error        (See SE14)
    A019
    SD-MD-CM
    DDIC Error        (See SE14)
    A021
    SD-MD-CM
    DDIC Error        (See SE14)
    A022
    SD-MD-CM
    DDIC Error        (See SE14)
    A023
    SD-MD-CM
    DDIC Error        (See SE14)
    A024
    SD-MD-CM
    DDIC Error        (See SE14)
    A025
    SD-MD-CM
    DDIC Error        (See SE14)
    A026
    SD-MD-CM
    DDIC Error        (See SE14)
    A028
    SD-MD-CM
    DDIC Error        (See SE14)
    A030
    SD-MD-CM
    DDIC Error        (See SE14)
    A032
    SD-MD-CM
    DDIC Error        (See SE14)
    A044
    SD-MD-CM
    DDIC Error        (See SE14)
    A045
    SD-MD-CM
    DDIC Error        (See SE14)
    A046
    SD-MD-CM
    DDIC Error        (See SE14)
    A047
    SD-MD-CM
    DDIC Error        (See SE14)
    A049
    SD-MD-CM
    DDIC Error        (See SE14)
    A051
    SD-MD-CM
    DDIC Error        (See SE14)
    A052
    SD-MD-CM
    DDIC Error        (See SE14)
    A053
    SD-MD-CM
    DDIC Error        (See SE14)
    A054
    SD-MD-CM
    DDIC Error        (See SE14)
    A058
    SD-MD-CM
    DDIC Error        (See SE14)
    A059
    SD-MD-CM
    DDIC Error        (See SE14)
    A060
    SD-MD-CM
    DDIC Error        (See SE14)
    A061
    SD-MD-CM
    DDIC Error        (See SE14)
    A062
    SD-MD-CM
    DDIC Error        (See SE14)
    A063
    SD-MD-CM
    DDIC Error        (See SE14)
    A400
    IS-H-PA
    DDIC Error        (See SE14)
    A401
    IS-H-BD
    DDIC Error        (See SE14)
    AT100
    FIN-FSCM-TRM-TM
    DDIC Error        (See SE14)
    AT14
    FIN-FSCM-TRM-TM
    DDIC Error        (See SE14)
    ATAB
    BC-DWB-DIC-AC
    DDIC Error        (See SE14)
    BC325V00
    BC-CTS
    DDIC Error        (See SE14)
    BC325V10
    BC-CTS
    DDIC Error        (See SE14)
    BC325X00
    BC-CTS
    DDIC Error        (See SE14)
    BC325X01
    BC-CTS
    DDIC Error        (See SE14)
    BC325X02
    BC-CTS
    DDIC Error        (See SE14)
    BC325X03
    BC-CTS
    DDIC Error        (See SE14)
    BC325X04
    BC-CTS
    DDIC Error        (See SE14)
    BC325X05
    BC-CTS
    DDIC Error        (See SE14)
    BC325X06
    BC-CTS
    DDIC Error        (See SE14)
    BC325X07
    BC-CTS
    DDIC Error        (See SE14)
    BC325X08
    BC-CTS
    DDIC Error        (See SE14)
    BC325X09
    BC-CTS
    DDIC Error        (See SE14)
    BC325X10
    BC-CTS
    DDIC Error        (See SE14)
    BC325X11
    BC-CTS
    DDIC Error        (See SE14)
    BC325X12
    BC-CTS
    DDIC Error        (See SE14)
    BC325X13
    BC-CTS
    DDIC Error        (See SE14)
    BC325X14
    BC-CTS
    DDIC Error        (See SE14)
    BC325X15
    BC-CTS
    DDIC Error        (See SE14)
    BC325X16
    BC-CTS
    DDIC Error        (See SE14)
    BC325X17
    BC-CTS
    DDIC Error        (See SE14)
    BC325X18
    BC-CTS
    DDIC Error        (See SE14)
    BC325X19
    BC-CTS
    DDIC Error        (See SE14)
    BC325X20
    BC-CTS
    DDIC Error        (See SE14)
    BC325X21
    BC-CTS
    DDIC Error        (See SE14)
    BC325X22
    BC-CTS
    DDIC Error        (See SE14)
    BC325X23
    BC-CTS
    DDIC Error        (See SE14)
    BC325X24
    BC-CTS
    DDIC Error        (See SE14)
    BC325X25
    BC-CTS
    DDIC Error        (See SE14)
    BC325X26
    BC-CTS
    DDIC Error        (See SE14)
    BC325X27
    BC-CTS
    DDIC Error        (See SE14)
    BC325X28
    BC-CTS
    DDIC Error        (See SE14)
    BC325X29
    BC-CTS
    DDIC Error        (See SE14)
    BC325X30
    BC-CTS
    DDIC Error        (See SE14)
    BC325X31
    BC-CTS
    DDIC Error        (See SE14)
    BC325X32
    BC-CTS
    DDIC Error        (See SE14)
    BC325X33
    BC-CTS
    DDIC Error        (See SE14)
    BC325X34
    BC-CTS
    DDIC Error        (See SE14)
    BC325X35
    BC-CTS
    DDIC Error        (See SE14)
    BC325X36
    BC-CTS
    DDIC Error        (See SE14)
    BC325X37
    BC-CTS
    DDIC Error        (See SE14)
    BC325X38
    BC-CTS
    DDIC Error        (See SE14)
    BC325X39
    BC-CTS
    DDIC Error        (See SE14)
    BC325X40
    BC-CTS
    DDIC Error        (See SE14)
    DICS_T150
    IS-AD-SSP
    DDIC Error        (See SE14)
    DICS_T150F
    IS-AD-SSP
    DDIC Error        (See SE14)
    DICS_T156B
    IS-AD-SSP
    DDIC Error        (See SE14)
    DICS_T157B
    IS-AD-SSP
    DDIC Error        (See SE14)
    DICS_T157H
    IS-AD-SSP
    DDIC Error        (See SE14)
    FB03
    FI-FM
    DDIC Error        (See SE14)
    FKKCLEDRI
    FI-CA
    DDIC Error        (See SE14)
    FKKCLEGP
    FI-CA
    DDIC Error        (See SE14)
    FKKCLEGPI
    FI-CA
    DDIC Error        (See SE14)
    FKKCLEVK
    FI-CA
    DDIC Error        (See SE14)
    FKKCLEVKI
    FI-CA
    DDIC Error        (See SE14)
    FKKCLEZW2I
    FI-CA
    DDIC Error        (See SE14)
    FKKCLEZWFI
    FI-CA
    DDIC Error        (See SE14)
    FKKNRRANGE
    FI-CA-INV
    DDIC Error        (See SE14)
    FKKNUMKR
    FI-CA
    DDIC Error        (See SE14)
    FKKVKOPA
    FI-CA
    DDIC Error        (See SE14)
    FMVALID
    FI-FM
    DDIC Error        (See SE14)
    GB91T
    FI-SL-SL
    DDIC Error        (See SE14)
    GLP1
    FI-SL-SL
    DDIC Error        (See SE14)
    GLP2
    FI-SL-SL
    DDIC Error        (See SE14)
    GLPPC
    EC-PCA
    DDIC Error        (See SE14)
    GLS1
    FI-SL-SL
    DDIC Error        (See SE14)
    GLS2
    FI-LC-LC
    DDIC Error        (See SE14)
    GLSP
    FI-SL-SL
    DDIC Error        (See SE14)
    GLSPC
    EC-PCA
    DDIC Error        (See SE14)
    GLT1
    FI-SL-SL
    DDIC Error        (See SE14)
    GLT2
    FI-LC-LC
    DDIC Error        (See SE14)
    GLTP
    FI-SL-SL
    DDIC Error        (See SE14)
    ICLUSCNTXT
    FS-CM
    DDIC Error        (See SE14)
    INDEXDT
    TR
    DDIC Error        (See SE14)
    ISUERDK
    IS-U-IN
    DDIC Error        (See SE14)
    ISUNUMKR
    IS-U-IN
    DDIC Error        (See SE14)
    JSDTPAER
    IS-M
    DDIC Error        (See SE14)
    JVS1
    CA-JVA
    DDIC Error        (See SE14)
    KAPOL
    SD-MD-CM
    DDIC Error        (See SE14)
    MCLIK
    LO-LIS-LIB
    DDIC Error        (See SE14)
    MCLIL
    LO-LIS-LIB
    DDIC Error        (See SE14)
    MCLIM
    LO-LIS-LIB
    DDIC Error        (See SE14)
    MWCURM
    MM-IM
    DDIC Error        (See SE14)
    PYONUMKR
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    STXXFILTER
    BC-DB-DBI
    DDIC Error        (See SE14)
    T000C
    FI-SL-SL
    DDIC Error        (See SE14)
    T001E
    FI
    DDIC Error        (See SE14)
    T001F
    FI
    DDIC Error        (See SE14)
    T001R
    FI
    DDIC Error        (See SE14)
    T001S
    FI
    DDIC Error        (See SE14)
    T001T
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T001X
    FI
    DDIC Error        (See SE14)
    T001Z
    FI
    DDIC Error        (See SE14)
    T003A
    FI
    DDIC Error        (See SE14)
    T003M
    MM-IM
    DDIC Error        (See SE14)
    T003T
    FI
    DDIC Error        (See SE14)
    T004F
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T004G
    FI
    DDIC Error        (See SE14)
    T004R
    FI-GL-GL
    DDIC Error        (See SE14)
    T004S
    FI-GL-GL
    DDIC Error        (See SE14)
    T004T
    FI
    DDIC Error        (See SE14)
    T004V
    FI
    DDIC Error        (See SE14)
    T004W
    FI
    DDIC Error        (See SE14)
    T005B
    BC-SRV-ADR
    DDIC Error        (See SE14)
    T005Q
    FI
    DDIC Error        (See SE14)
    T005R
    FI
    DDIC Error        (See SE14)
    T005X
    BC-ABA-LA
    DDIC Error        (See SE14)
    T007B
    CA-BK
    DDIC Error        (See SE14)
    T007G
    FI-GL-IS
    DDIC Error        (See SE14)
    T007H
    FI-GL-IS
    DDIC Error        (See SE14)
    T007S
    FI
    DDIC Error        (See SE14)
    T008
    FI
    DDIC Error        (See SE14)
    T008T
    FI
    DDIC Error        (See SE14)
    T009
    BC-SRV-BSF
    DDIC Error        (See SE14)
    T009B
    BC-SRV-BSF
    DDIC Error        (See SE14)
    T009C
    BC-SRV-BSF
    DDIC Error        (See SE14)
    T009T
    BC-SRV-BSF
    DDIC Error        (See SE14)
    T009Y
    BC-SRV-BSF
    DDIC Error        (See SE14)
    T010O
    FI
    DDIC Error        (See SE14)
    T010P
    FI
    DDIC Error        (See SE14)
    T011P
    FI-GL-GL
    DDIC Error        (See SE14)
    T011Q
    FI-GL-GL
    DDIC Error        (See SE14)
    T011Z
    FI-GL-GL
    DDIC Error        (See SE14)
    T012E
    FI-BL-MD
    DDIC Error        (See SE14)
    T014N
    FI-AR-AR
    DDIC Error        (See SE14)
    T015L
    FI-BL-PT
    DDIC Error        (See SE14)
    T015M
    CA-BK
    DDIC Error        (See SE14)
    T015W
    FI-BL-PT
    DDIC Error        (See SE14)
    T015Z
    CA-BK
    DDIC Error        (See SE14)
    T016
    FI
    DDIC Error        (See SE14)
    T016T
    FI
    DDIC Error        (See SE14)
    T017
    PSM-FM-MD
    DDIC Error        (See SE14)
    T018C
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T018D
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T018P
    CA-BK
    DDIC Error        (See SE14)
    T021
    FI
    DDIC Error        (See SE14)
    T021A
    FI
    DDIC Error        (See SE14)
    T021B
    FI
    DDIC Error        (See SE14)
    T021C
    FI
    DDIC Error        (See SE14)
    T021N
    FI
    DDIC Error        (See SE14)
    T021R
    FI
    DDIC Error        (See SE14)
    T021T
    FI
    DDIC Error        (See SE14)
    T021V
    FI
    DDIC Error        (See SE14)
    T021Z
    FI
    DDIC Error        (See SE14)
    T027C
    MM-PUR
    DDIC Error        (See SE14)
    T027D
    MM-PUR
    DDIC Error        (See SE14)
    T028A
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T028B
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T028D
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T028E
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T030
    FI
    DDIC Error        (See SE14)
    T030B
    FI
    DDIC Error        (See SE14)
    T030C
    FI-SL-SL
    DDIC Error        (See SE14)
    T030D
    FI
    DDIC Error        (See SE14)
    T030E
    FI
    DDIC Error        (See SE14)
    T030F
    FI
    DDIC Error        (See SE14)
    T030G
    FI
    DDIC Error        (See SE14)
    T030H
    FI
    DDIC Error        (See SE14)
    T030HB
    FI-GL-IS
    DDIC Error        (See SE14)
    T030I
    FI
    DDIC Error        (See SE14)
    T030K
    FI
    DDIC Error        (See SE14)
    T030Q
    FI
    DDIC Error        (See SE14)
    T030R
    FI
    DDIC Error        (See SE14)
    T030S
    FI
    DDIC Error        (See SE14)
    T030V
    FI
    DDIC Error        (See SE14)
    T031
    FI
    DDIC Error        (See SE14)
    T031S
    FI
    DDIC Error        (See SE14)
    T031T
    FI
    DDIC Error        (See SE14)
    T033E
    FI
    DDIC Error        (See SE14)
    T033F
    FI
    DDIC Error        (See SE14)
    T033G
    FI
    DDIC Error        (See SE14)
    T033I
    FI
    DDIC Error        (See SE14)
    T033J
    FI
    DDIC Error        (See SE14)
    T033U
    FI
    DDIC Error        (See SE14)
    T035V
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T036Q
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T036S
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T037
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T037A
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T037R
    TR
    DDIC Error        (See SE14)
    T037S
    TR
    DDIC Error        (See SE14)
    T037T
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T038V
    FIN-FSCM-CLM-CM-CM
    DDIC Error        (See SE14)
    T040
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T040A
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T040S
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T040T
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T041A
    FI
    DDIC Error        (See SE14)
    T041T
    FI
    DDIC Error        (See SE14)
    T042
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042A
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042D
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042F
    FI-BL-PT
    DDIC Error        (See SE14)
    T042G
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042H
    FI-BL-PT
    DDIC Error        (See SE14)
    T042I
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042J
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042K
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042L
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042M
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042N
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042P
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042S
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T042V
    FI-AP-AP-PT
    DDIC Error        (See SE14)
    T043
    FI
    DDIC Error        (See SE14)
    T043G
    FI
    DDIC Error        (See SE14)
    T043K
    FI
    DDIC Error        (See SE14)
    T043S
    FI
    DDIC Error        (See SE14)
    T043T
    FI
    DDIC Error        (See SE14)
    T044A
    FI
    DDIC Error        (See SE14)
    T044B
    FI
    DDIC Error        (See SE14)
    T044E
    FI-GL-IS
    DDIC Error        (See SE14)
    T044Z
    FI
    DDIC Error        (See SE14)
    T045B
    FI-AR-AR
    DDIC Error        (See SE14)
    T045D
    FI-AR-AR
    DDIC Error        (See SE14)
    T045E
    FI
    DDIC Error        (See SE14)
    T045G
    FI-AR-AR
    DDIC Error        (See SE14)
    T045L
    FI-AR-AR
    DDIC Error        (See SE14)
    T046
    FI
    DDIC Error        (See SE14)
    T046T
    FI
    DDIC Error        (See SE14)
    T047
    FI
    DDIC Error        (See SE14)
    T047A
    FI
    DDIC Error        (See SE14)
    T047B
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T047C
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T047D
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T047E
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T047F
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T047H
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T047M
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T047N
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T047R
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T047S
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T047T
    FI-AR-AR-DU
    DDIC Error        (See SE14)
    T048B
    FI
    DDIC Error        (See SE14)
    T048I
    FI
    DDIC Error        (See SE14)
    T048K
    FI
    DDIC Error        (See SE14)
    T048L
    FI
    DDIC Error        (See SE14)
    T049C
    FI-GL-IS
    DDIC Error        (See SE14)
    T049E
    FI-GL-IS
    DDIC Error        (See SE14)
    T049F
    FI-GL-IS
    DDIC Error        (See SE14)
    T049L
    FI
    DDIC Error        (See SE14)
    T050T
    FI
    DDIC Error        (See SE14)
    T052A
    FI
    DDIC Error        (See SE14)
    T052R
    FI
    DDIC Error        (See SE14)
    T052S
    FI
    DDIC Error        (See SE14)
    T052T
    FI
    DDIC Error        (See SE14)
    T053
    FI
    DDIC Error        (See SE14)
    T053E
    FI
    DDIC Error        (See SE14)
    T053V
    FI
    DDIC Error        (See SE14)
    T053W
    FI
    DDIC Error        (See SE14)
    T054
    FI
    DDIC Error        (See SE14)
    T054A
    FI
    DDIC Error        (See SE14)
    T054T
    FI
    DDIC Error        (See SE14)
    T055G
    CA-BK
    DDIC Error        (See SE14)
    T055T
    CA-BK
    DDIC Error        (See SE14)
    T056
    FI-AR-AR
    DDIC Error        (See SE14)
    T056A
    FI-AR-AR
    DDIC Error        (See SE14)
    T056B
    FI-AR-AR
    DDIC Error        (See SE14)
    T056D
    FI-AR-AR
    DDIC Error        (See SE14)
    T056F
    FI-AR-AR
    DDIC Error        (See SE14)
    T056L
    FI-AR-AR
    DDIC Error        (See SE14)
    T056S
    FI-AR-AR-IN
    DDIC Error        (See SE14)
    T056T
    FI-AR-AR
    DDIC Error        (See SE14)
    T056U
    FI-AR-AR
    DDIC Error        (See SE14)
    T056X
    FI-AR-AR
    DDIC Error        (See SE14)
    T056Y
    FI-AR-AR-IN
    DDIC Error        (See SE14)
    T057
    FI
    DDIC Error        (See SE14)
    T057T
    FI
    DDIC Error        (See SE14)
    T059A
    FI
    DDIC Error        (See SE14)
    T059B
    FI
    DDIC Error        (See SE14)
    T059F
    FI
    DDIC Error        (See SE14)
    T059L
    FI-AP-AP
    DDIC Error        (See SE14)
    T059M
    FI
    DDIC Error        (See SE14)
    T059T
    FI
    DDIC Error        (See SE14)
    T060
    FI-AR-AR
    DDIC Error        (See SE14)
    T060A
    FI-AR-AR
    DDIC Error        (See SE14)
    T060B
    FI-AR-AR
    DDIC Error        (See SE14)
    T060O
    FI-AR-AR
    DDIC Error        (See SE14)
    T060S
    FI-AR-AR
    DDIC Error        (See SE14)
    T060T
    FI-AR-AR
    DDIC Error        (See SE14)
    T060U
    FI-AR-AR
    DDIC Error        (See SE14)
    T064S
    MM-IM
    DDIC Error        (See SE14)
    T068A
    TR
    DDIC Error        (See SE14)
    T068B
    TR
    DDIC Error        (See SE14)
    T069
    MM-PUR
    DDIC Error        (See SE14)
    T069Q
    MM-PUR
    DDIC Error        (See SE14)
    T069T
    MM-PUR
    DDIC Error        (See SE14)
    T070
    FI
    DDIC Error        (See SE14)
    T071
    FI
    DDIC Error        (See SE14)
    T074
    FI
    DDIC Error        (See SE14)
    T074A
    FI
    DDIC Error        (See SE14)
    T074T
    FI
    DDIC Error        (See SE14)
    T077S
    FI
    DDIC Error        (See SE14)
    T077T
    FI
    DDIC Error        (See SE14)
    T077X
    FI
    DDIC Error        (See SE14)
    T077Y
    FI
    DDIC Error        (See SE14)
    T077Z
    FI
    DDIC Error        (See SE14)
    T078S
    FI
    DDIC Error        (See SE14)
    T078W
    LO-MD-PL
    DDIC Error        (See SE14)
    T082A
    FI-AA-AA
    DDIC Error        (See SE14)
    T082E
    FI-AA-AA
    DDIC Error        (See SE14)
    T082S
    FI-AA-AA
    DDIC Error        (See SE14)
    T083L
    FI-AA-AA
    DDIC Error        (See SE14)
    T083S
    FI-AA-AA
    DDIC Error        (See SE14)
    T083T
    FI-AA-AA
    DDIC Error        (See SE14)
    T084A
    FI-AA-AA
    DDIC Error        (See SE14)
    T086A
    FI-AA-IS
    DDIC Error        (See SE14)
    T086T
    FI-AA-AA
    DDIC Error        (See SE14)
    T087I
    FI-AA-AA
    DDIC Error        (See SE14)
    T087J
    FI-AA-AA
    DDIC Error        (See SE14)
    T088
    FI-AA-IS
    DDIC Error        (See SE14)
    T089T
    FI-AA-AA
    DDIC Error        (See SE14)
    T090I
    FI-AA-AA
    DDIC Error        (See SE14)
    T090X
    FI-AA-IS
    DDIC Error        (See SE14)
    T090Y
    FI-AA-AA
    DDIC Error        (See SE14)
    T092
    FI-AA-AA
    DDIC Error        (See SE14)
    T092T
    FI-AA-AA
    DDIC Error        (See SE14)
    T093D
    FI-AA-AA
    DDIC Error        (See SE14)
    T093F
    FI-AA-AA
    DDIC Error        (See SE14)
    T093N
    FI-AA-AA
    DDIC Error        (See SE14)
    T093S
    FI-AA-AA
    DDIC Error        (See SE14)
    T093U
    FI-AA-AA
    DDIC Error        (See SE14)
    T093Y
    FI-AA-AA
    DDIC Error        (See SE14)
    T094
    FI-AA-AA
    DDIC Error        (See SE14)
    T094C
    FI-AA-AA
    DDIC Error        (See SE14)
    T097
    FI-AA-AA
    DDIC Error        (See SE14)
    T097T
    FI-AA-AA
    DDIC Error        (See SE14)
    T098
    FI-AA-AA
    DDIC Error        (See SE14)
    T098T
    FI-AA-AA
    DDIC Error        (See SE14)
    T099B
    FI-AA-AA
    DDIC Error        (See SE14)
    T099V
    FI-AA-AA
    DDIC Error        (See SE14)
    T100C
    CA-BK
    DDIC Error        (See SE14)
    T130C
    LO-MD-MM
    DDIC Error        (See SE14)
    T130D
    LO-MD-MM
    DDIC Error        (See SE14)
    T130G
    LO-MD-MM
    DDIC Error        (See SE14)
    T130M
    LO-MD-MM
    DDIC Error        (See SE14)
    T130O
    LO-MD-MM
    DDIC Error        (See SE14)
    T130P
    LO-MD-MM
    DDIC Error        (See SE14)
    T130S
    LO-MD-MM
    DDIC Error        (See SE14)
    T131A
    LO-MD-MM
    DDIC Error        (See SE14)
    T131T
    LO-MD-MM
    DDIC Error        (See SE14)
    T131V
    LO-MD-MM
    DDIC Error        (See SE14)
    T131X
    LO-MD-MM
    DDIC Error        (See SE14)
    T134W
    LO-MD-MM
    DDIC Error        (See SE14)
    T135A
    LO-MD-MM
    DDIC Error        (See SE14)
    T136
    LO-MD-MM
    DDIC Error        (See SE14)
    T136V
    LO-MD-MM
    DDIC Error        (See SE14)
    T138B
    LO-MD-MM
    DDIC Error        (See SE14)
    T138M
    LO-MD-MM
    DDIC Error        (See SE14)
    T139A
    LO-MD-MM
    DDIC Error        (See SE14)
    T139B
    LO-MD-MM
    DDIC Error        (See SE14)
    T147
    MM-IS-VE
    DDIC Error        (See SE14)
    T147A
    MM-IS-VE
    DDIC Error        (See SE14)
    T147C
    MM-IS-VE
    DDIC Error        (See SE14)
    T147E
    MM-IS-VE
    DDIC Error        (See SE14)
    T147H
    MM-IS-VE
    DDIC Error        (See SE14)
    T147K
    MM-IS-VE
    DDIC Error        (See SE14)
    T147L
    MM-IS-VE
    DDIC Error        (See SE14)
    T147M
    MM-IS-VE
    DDIC Error        (See SE14)
    T147N
    MM-IS-VE
    DDIC Error        (See SE14)
    T147O
    MM-IS-VE
    DDIC Error        (See SE14)
    T148A
    LO-MD-MM
    DDIC Error        (See SE14)
    T148B
    LO-MD-MM
    DDIC Error        (See SE14)
    T148G
    LO-MD-MM
    DDIC Error        (See SE14)
    T148M
    LO-MD-MM
    DDIC Error        (See SE14)
    T150
    MM-IM
    DDIC Error        (See SE14)
    T150F
    MM-IM
    DDIC Error        (See SE14)
    T156B
    MM-IM
    DDIC Error        (See SE14)
    T156H
    MM-IM
    DDIC Error        (See SE14)
    T156K
    MM-IM
    DDIC Error        (See SE14)
    T156N
    MM-IM
    DDIC Error        (See SE14)
    T157B
    MM-IM
    DDIC Error        (See SE14)
    T157D
    MM-IM
    DDIC Error        (See SE14)
    T157E
    MM-IM
    DDIC Error        (See SE14)
    T157F
    MM-IM
    DDIC Error        (See SE14)
    T157H
    MM-IM
    DDIC Error        (See SE14)
    T157N
    MM-IM
    DDIC Error        (See SE14)
    T157O
    MM-IM
    DDIC Error        (See SE14)
    T157P
    MM-IM
    DDIC Error        (See SE14)
    T157Q
    MM-IM
    DDIC Error        (See SE14)
    T157R
    MM-IM
    DDIC Error        (See SE14)
    T157T
    MM-IM
    DDIC Error        (See SE14)
    T158
    MM-IM
    DDIC Error        (See SE14)
    T158B
    MM-IM
    DDIC Error        (See SE14)
    T158I
    MM-IM
    DDIC Error        (See SE14)
    T158N
    MM-IM
    DDIC Error        (See SE14)
    T159B
    MM-IM
    DDIC Error        (See SE14)
    T159E
    MM-IM
    DDIC Error        (See SE14)
    T159G
    MM-IM
    DDIC Error        (See SE14)
    T159H
    MM-IM
    DDIC Error        (See SE14)
    T159M
    MM-IM
    DDIC Error        (See SE14)
    T159N
    MM-IM
    DDIC Error        (See SE14)
    T159O
    MM-IM
    DDIC Error        (See SE14)
    T159P
    MM-IM
    DDIC Error        (See SE14)
    T159Q
    MM-IM
    DDIC Error        (See SE14)
    T159R
    MM-IM
    DDIC Error        (See SE14)
    T159S
    MM-IM
    DDIC Error        (See SE14)
    T159T
    MM-IM
    DDIC Error        (See SE14)
    T160
    MM-PUR
    DDIC Error        (See SE14)
    T160B
    MM-PUR
    DDIC Error        (See SE14)
    T160C
    MM-PUR
    DDIC Error        (See SE14)
    T160D
    MM-PUR
    DDIC Error        (See SE14)
    T160E
    MM-PUR
    DDIC Error        (See SE14)
    T160I
    MM-PUR
    DDIC Error        (See SE14)
    T160J
    MM-PUR
    DDIC Error        (See SE14)
    T160L
    MM-PUR
    DDIC Error        (See SE14)
    T160O
    MM-PUR
    DDIC Error        (See SE14)
    T160P
    MM-PUR
    DDIC Error        (See SE14)
    T160Q
    MM-PUR
    DDIC Error        (See SE14)
    T160R
    MM-PUR
    DDIC Error        (See SE14)
    T160S
    MM-PUR
    DDIC Error        (See SE14)
    T160T
    MM-PUR
    DDIC Error        (See SE14)
    T160V
    MM-PUR
    DDIC Error        (See SE14)
    T160W
    MM-PUR
    DDIC Error        (See SE14)
    T160X
    MM-PUR
    DDIC Error        (See SE14)
    T160Y
    MM-PUR
    DDIC Error        (See SE14)
    T161A
    MM-PUR
    DDIC Error        (See SE14)
    T161B
    MM-PUR
    DDIC Error        (See SE14)
    T161E
    MM-PUR
    DDIC Error        (See SE14)
    T161F
    MM-PUR
    DDIC Error        (See SE14)
    T161G
    MM-PUR
    DDIC Error        (See SE14)
    T161H
    MM-PUR
    DDIC Error        (See SE14)
    T161I
    MM-PUR
    DDIC Error        (See SE14)
    T161N
    MM-PUR

    Hello!
    I have experienced the same error.
    I did a System Copy using ordinary DB backup/restore and after that SAPinst (Additional Software Life-Cycle Tasks).
    I found that a unicode conversion program, UMG_POOL_TABLE, was executed at the end of SAPinst.
    This program converted some of my pooled tables to Unicode (doubled fieldlength of VARDATA).
    Even though I already run UNICODE.
    I verified this by executing program RADPROTA, checking for logs starting with TPOCNV* (in found my candidates for next step).
    With program RADPOCNV I could "reverse" the converted tables back to the correct length (for example ATAB with unicode you should have 904).
    For more info read SAP Note 686357 - "Table pool nametab length incorrect after Unicode migration"
    I suggest you check if you have any TPOCNV* logfiles containing any pooltable conversions.
    If so check the pool tables in SE14.
    If they are inconsistent you can use RADPCONV to correct them.
    I guess there is some kind of bug in SAPinst.
    Bye,
    Lasse
    Edited by: Lars Nilsson on May 7, 2008 4:37 PM

Maybe you are looking for

  • Using iMac as base station

    First, forgive me as I new to Apple (former PC). I have the new iMac 27" i7 and was told that it has a built-in Airport Extreme. I just purchase an Airport Express and can't figure out how to get the AirPort Utility to recognize my iMac as the Base S

  • Really strange problem with accelerators...

    Hi fellows! I have created an accelerator for a JMenuItem using the code: someMenuItem.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_N, InputEvent.CTRL_MASK)); This accelerator is used to open a new child JFrame which displays different kind of s

  • Prime NCS Alarm Browser

    Hello all, we have Cisco Prime NCS Ver. 1.0.2.29 running on a virtual appliance. Since a few weeks the alarm summary shows alarms but the alarm browser window is empty. Any ideas? Regards, Hubert

  • Pricing for wieghted articles

    Hi How do we maintain pricing for weighted articles at store, like customer buys vegitables- ABC - 1 kgs, XYZ - 2 kgs, how to setup this, vegitable normolly wieght check at POS point and then displays prices based on how much it is. regards Satish

  • How to add chapter markers in GarageBand

    I have never added chapter markers in GarageBand, and I assume that most other iMovie users had not either. Here is a little walkthrough I wrote up after going through the process. http://imovie08.blogspot.com/2007/08/how-to-add-chapter-markers.html