Poll: Who is having no sound issues with X-Fi Titanium Fatal1ty Pro?

Several weeks ago I purchased an? X-Fi Titanium Fatalty Pro. I have the latest drivers/software installed for all of my hardware and am using Windows 7 64-bit ultimate. There is no sound when the computer resumes from Standby or hibernate. I have to disable the driver in the device manager and then re-enable to restore sound. It seems the X-fi driver is not initializing when the computer resumes from these states. Problem does not occur during a normal cold start or restart.
i have an open ticket with creative support and need to find out if others are having the same issue on windows 7. Several folks having the same issue at this link with little to no success at fixing. I don't know if this is a driver thing, an IRC conflict or what. I have no had this issue on the same hardware with any other sound cards I've I had, to include an HT Omega card and the onboard sound; which leaves me convinced it is something with the X-fi card.
Please respond to this posting if you are having the same issue. If you have found a way to fix it, please say so as the creative support folks are still investigating and have asked me to give them more examples.

Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
"Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
I have created a support ticket hoping that this and the other post above might bring about a driver update.
Will keep testing and post any updates.

Similar Messages

Sound lag with X-Fi Titanium Fatal1ty Pro Seri

Hello to you all,
I just built a new computer and the problem I have is that sound lags with WMCE in Vista. My video card is ATI 4850 (52mb) and motherboard is 790gx. The internal sound and integrated video are both disabbled. Any suggestions as to fix the sound lag while watching TV on Media Center? I have no problems with music or games with this. Thanks to all.

Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
"Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
I have created a support ticket hoping that this and the other post above might bring about a driver update.
Will keep testing and post any updates.

Having start-up issues with my 1st gen Macbook Pro

Hi everyone. I just started having start-up issues with my first generation Macbook Pro. It was working fine the other day when I last used it, but today I went to use it and it wont load up to my desktop...? It starts up (grey screen with the little swirly bar under the apple,) then it goes to a blue screen, then my background and dock appear, then (before any of my desktop files even show up,) it goes to a blue screen (that brightens up and then dims a little,) and it just keeps showing this with a little swirly progress symbol (shows when the screen is darker blue, then disappears when the screen is a brighter blue.) I've included a video that I took with my iPhone to show it situation. Any ideas as to what's wrong with it? Thanks in advance!
http://youtu.be/oDCfHM-Zoes

Safe Boot by restarting your computer while holding down the "shift" key. Safe booting disables all nonessential processes, often times allowing you to start up when you would otherwise crash.
As of OS X 10.5.6 Safe Boot deletes the dynamic loader shared cache location in the /var/db/dyld directory. A corrupt cache here can cause the blue screen crash. Once you restart normally, the cache will be recreated. This should take care of the issue.
http://support.apple.com/kb/HT1564
http://support.apple.com/kb/HT1455
Use Software Update to update your os to 10.6.8 and anything else that needs to be updated.

No MediaSource Go! with X-Fi Titanium Fatal1ty Pro Series?

I recently picked up a new X-Fi Titanium Fatalty Pro Series card; which replaced my older X-Fi Platinum, that sadly stopped working.
Anyway I noticed that, this newer Titanium card came with a newer version of the Creative MediaSource software; called MediaSource 5.
However, it does not include the launching application, MediaSource Go! which is the launcher bar that loads on startup. With my X-Fi Plat, when I hover my mouse over the top edge of my screen the MediaSource Go! launcher bar drops into view and I can just click on the icon of any Creative application that I have on that bar, to launch that application.
I liked that very much.
So I am curious, why is this not included with the newer MediaSource that comes with the X-Fi Titanium Fatalty Pro? I would very much love to have it!

@. Re: No MediaSource Go! with X-Fi Titanium Fatalty Pro Series? I have a similar issue. I am having a problem with speaker calibration which strated several months ago after updating some Creative files. Today I uninstalled all Creative apps and driver pack and reinstalled the latest versions. Doing this I lost my Mediasource Go! bar. So I downloaded it and when I tried to install it I got a message saying? I did not have the "minimum" version of MediaSource and that it would now quit. However, when I had Go! before I also had Mediasource5; in fact the Start Menu shortcut for Go! (which is now a broken link since Go was removed) showed it was in the Mediasource5 directory. So why won't Mediasource Go! install with Mediasource5 installed? I thought the "minimum" version of Mediasource required for Go! was 3.00.6.

T6100 with X-FI Titanium Fatal1ty Pro and Windows 7 x64

7T600 with X-FI Titanium Fatalty Pro and Windows 7 x64 Hello,
Please forgive me my bad laungage. Im writting this Post because i want to ensure i wont have any problem using configuration as i wrote in topic. So, are there any drivers for Windows 7 x64 (PL, Home Premium) for my sound card. Can i also use Creative Alchemy tool on Windows 7 x64. And do i need to use Alchemy on Windows 7, to gain EAX in games too? Can i also download and use PowerDVD with is deli'vered with the drivers? And what with Dolby Digital Li've? Is there a problem with activating and using it on Windows 7? And last question: Can i gain a 5. sound with my Creative Inspire T600 sound system and use it in game, and music listening?without any trouble?
I wish to apologize for that many?questions but this is very important to me. So can i use it all, and can i install it from my X-FI?Titanium?Install CD, or do i have to download it from Creative site?
Thank you very much for answer!
Thunderbolt (my real name is too hard for foreigners) ^^

Please refer to my reply on your post under Windows 7.

5.1 issues with X-Fi Titanium Fatal1ty

Hi folks, how's it going?
I'm having several problems setting up 5. surround sound with my Sound Blaster X-Fi Titanium Fatalty Pro. I'm connecting to my DDTS-00 reciever via an optical cable, and using Dolby Digital Li've or DTS Connect (I get the same results with both technologies).
I can get surround sound working in Halo and Halo 2. However, I have to check the "allow applications to take exclusi've control of this device" box in Control Panel > Sound > SPDIF Out > Advanced tab to get them to work. This causes Windows Media Player to throw up the error "Windows Media Player encountered a problem while playing the file" whenever I try to play an mp3. Yet if I uncheck the "exclusi've control" box, I just get stereo sound from my games but WMP works fine.
As an exception, with Gears of War, Trillian, and Windows Vista itself I only get stereo when the box is unchecked, and NO sound when I have the box checked.
So, any ideas what I can possibly do? I'm using all the latest drivers and software versions.

If I were you, I'd run the 5. analog outputs from the soundcard into the DDTS-00. The DDTS-00 has the 6 rca inputs for analog input. That should give you less grief when gaming and listening to music at the same time. That's what I do on mine, everything works good that way and there's no fighting over the SPDIF output. And with analog,?you also have more control over all the application volumes, with SPDIF out, you do not.
Using the SPDIF out?will never provide a perfect medium for concurrent gaming and movie/music listening, at least with Creative's (and others) current implementation.
Use EAX when available for games, and if required use Alchemy?if the game needs it.
Message Edited by blasturd on 09-03-2008 07:05 AM

Using back SPDIF Motherboards outputs with X-Fi Titanium Fatal1ty Pro Series

I have an Asus Rampage Formula that comes with Digital Coaxial and Toslink outputs and a PCI-E sound card, Supreme FX II.
I was able to use both back SPDIF outputs with out any cable, you the card in the PCI-E slot, but I have change my card with a X-Fi Titanium Fatalty Pro Series, no im not able to use any of those outlets, im used the the Coax to my Home theater and the Toslink to me headphones.
Now I can only use the Toslink of the digital output of the X-Fi with my headphones but im not able to use the ports of the mobo to my home theater, is there a way I can use them? the card doesnt have a Coaxial output and thats the problem.
Also, my mobo has 4 pin SPDIF output port, so you can connect something there, but it seems that there are any cable from the output port of the mobo to the audio card....
I found this but Im thinking it might not work...
http://cgi.ebay.com/ASUS-COMPUTER-MB-ACCESSORY-SPDIF-OUT-COA-OPT-4pin-SPDIF_W0QQitemZ3504993780QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item3504993780&_trksid=p3286.c0. m4&_trkparms=72%3A234%7C66%3A2%7C65%3A2%7C39%3A%7C 240%3A38%7C30%3A%7C293%3A%7C294%3A50?
Any help will be really appreciated!
Thank You!?

Any [email protected]

Microphone Trouble with X-FI Titanium Fatal1ty Pro

I just cannot get my mic to work anymore, even when it did it was muffled and sounded awful, I have installed and re installed everything I can think of. Any suggestions?

Can anyone help me?

Sound issues with ga

hello, ill start out with the basics
system
AMD Athlon 64bit 3000+ .8ghz
MSI Neo2 mainboard
024MB ddr400 ram
ati radeon 9800 pro 28mb video card
soundblaster li've 24bit sound card
I am having various sound issues with a few games i play, most notably FarCry and Halo PC
Farcry is the main problem. about 2 minutes after opening the game, my headphones or speakers will flip out and produce a noise like a highly amplified dial up modem. I have already pursued help on the game forums, and had no luck. any help or suggestions would be appreciated
thanks

I do not use Skype, but may be information from the below linked article helpful.
https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
Best.

I am having sound issues with Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmated. I can hear samples of audio books in the store section. Any ideas?

I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.

I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.

My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. Any tips?

My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. I tried restarting it a few times, nothing worked. I looked up many tutorials, and still nothing did the trick. Any tips?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Having sound issues with Mid 2011 iMac 27"

Having sound issues with Mid 2011 iMac 27". It has 10.10.2 OS X. Could this the issue and if so how do I revert to 10.7.3

It is almost impossible to diagnose sounds over the internet, however here is a link to some failing HD sounds. If one of yours be happy, at any rate take it in for service. If you got AppleCare or it's less than a year old it's covered.
Failing hard drive sounds

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
http://www.digitalrebellion.com
Try deleting your render files and re-rendering the project.
Start with these and let us know how you go.
Tony

I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because no longer in US

I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because the issue is registered to when i was in America and i require to pay the funds from an American source. Any ideas how i can resolve this? It wont accept my new card detail as im back in the UK. I think i have posted this in the wrong area but anyone got any ideas?
I have managed to change the rest of my accoutn being registered to the UK i think except this

Hi..
You can email Apple for help but the link is for the iTunes store not the Mac App Store. You've inadvertently poasted in the Using Mac App Store forum but that's ok. Billing issues are the same for the iTunes Store.
Click here > Apple - Support - iTunes Store - Contact Us
It wont accept my new card detail as im back in the UK
Your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

Poll: Who is having no sound issues with X-Fi Titanium Fatal1ty Pro?

Similar Messages

Maybe you are looking for