Polling time period for cancelled statements

I notice when I have clients cancelling statements, there is a consistent 5 minute delay before the statement is actually cancelled. Even if I use a program like TOAD in threaded mode, and click Cancel, it takes almost exactly 5 minutes before it actually breaks off. Which setting do I use and where, to adjust this polling time?

Well, in client-side code you can cancel a statement if it is blocked or running a very long operation. For example, in Java you can call a cancel() method on the Statement object after it has begun executing a SQL query (has to be done by a separate thread, of course). It should cancel it almost immediately, but for some reason there is a 5 minute delay. A friend of mine at another company can run the same code on his company's Oracle database, and the cancel is completed quickly, consistently. While my code consistently has to wait around 5 minutes.
There must be some setting to adjust this time, since we have knocked off just about ever other possible discrepency (driver/driver version, database/database version, java/JDBC/version)

Similar Messages

Estimate time period for OBIA 11g Vanilla Impelementaton For HR,Financails

Hi Guru's
I need to know Time period for OBIA 11g Vanilla Implementation for Following Appliations Source System is Oracle R12;
1- HR
2- Procurement
3- Financails
4- Supply Chain and Order Management
To implement all these four Application as once without any customization how long its going to take?????
Looking for your HELP....
Regards
Sher

Sher,
As per my knowledge Normally for any OBIA implementation a module
1st week for installation and Configuration of everything (ETL,DAC,RPD)
2nd week to load the data and to make necessary loads(inc/full) using DAC/ETL
3rd/4th week would be for testing the reports/Data and moving to production.
Note : Above time-lines varies by experience and also without any customization
Please post your questions on OBIA : Business Intelligence Applications
Thanks,
Saichand.v

Minimum time period for 6602

I'm using 6602 counter with the application of ND_BUFFERED_PERIOD_MSR with countinuous buffer to measure the time period between the consecutive pulses. If I send in constant time period pulse from frequency generator at 300kHz, the board returns "dataLossError" while 250kHz pulses give no error at all. It means the minimum time period is about 3 to 4 microseconds. However, if I send random pulses at 1kHz average frequency, the card sometimes gives "dataLossError". It seems if there is a single pair of pulses with spacing less than 3 to 4 microsecond, the card gives "dataLossError" although most pulse pairs are separated by a long time. Is that right?
Thanks,

I would suggest you use a shipping example to measure your pusles. If I recall from your previous post, you are using CVI. So you could go to Help->Find Examples (see screen shot below) and select an appropriate example.
Attachments:
Period Measurement CVI Find Example.JPG ‏107 KB

How to Set Time Period for KM Scheduler

Hi ,
I have created one Par based application in which i have assigned one role to perticular id dynamically and i scheduled this task by using KM Scheduler. but this scheduler assigns this task for 1 mins or greater than 1 hrs. i wanted to run this task for every 10 mins or 20mins or 30 mins. actually i tried to edit the time table property for KM Scheduler for 10 mins but it not works it take 1 hrs and 10 mins.
so is there any way to edit this time table property and set scheduler time to 10 mins or 20 mins.
Kind Regards,
Rahul

Hi Rahul,
If you want to run the scheduler for every 10 minutes, you can create your own timetable and assign it in the scheduler tasks.
Steps:
Goto Sytem Admin -> System Config -> Knowledge Management -> Content Management -> Global Services -> Scheduler Time Table -> Time Table -> Click on New
You can find Scheduler Time Table in advanced options.
Specify the vales as mentioned below and save it:
ID: <any ID as you want>
Minute : 10
Time Zone : GMT+05:30 (Asia/Calcutta) India Standard Time
For other parameters, no need to specify any value.
Then go to Global Services -> Scheduler Tasks -> Your Scheduler Component -> Select the new timetable you have created for timetable parameter and click OK
I have specified timezone as IST time. You can change the time zone as you require.I have done this and its working for me.
Hope this helps.
PS:Reward points for useful answers
Regards,
Yoga
Edited by: Yogalakshmi on Feb 27, 2008 6:14 AM

Pulling time used for only a certain time period for 11 different fields.

I have a report that pulls my OR room case times. Each room is set to different "open" times, ( rm1 open 12 hours, rm 2 open 12 hours, room 3 open 12 hours, room 4 open 7.5 hours, with Room 7 "off duty", etc.) I only want to pull data for the times my rooms are open, so if room 1 starts at 7am and a case goes past 7pm, i dont' want it to return any data for after 7pm. I only want the times that exist, if any, from the time my room opens to the time it is suppose to close. Currently i have a subreport built in that is totaling "all" the times for each room individually. I need to set the times it pulls for each of my room to reflect my open times to see if we have 100% utilization of the rooms. Is it possible to do this for each room ( i have 11 OR Rooms) by writing a formula? I am new to crystal report writing so i'm can't figure out how to make this work. Please help.

Personally, I question the logic of cutting off the time at "closing time" for each room. Regardless of the "normal open hours", I think it would be hugely beneficial to know if a OR is used outside of normal hours, and seeing a utilization of 110% would be a good indication. (You might want to open another OR, or hire more doctors, or...) If a triple organ transplant is gonna take 14 hours (made up data; I'm no surgeon!), I would think you'd want to see 116.7% utilization...
That being said, if you're convinced that the cutoff is the right choice, you probably want to link the usage data to a table with the OR hours, then use the Time() function and compare the start/stop timestamps to the open/close times of the OR, and use the larger (start) or smaller (end) values. Something like (basic syntax):
if Time({oper.startTime}) < {or.openTime} then
formula = {or.openTime}
else
formula = {oper.startTime}
end if
HTH,
Carl

Alert on time period for Invoice

Hi
We need to have a alert to alert the user if a order hasn't been converted within 48 hours. In SAP we have the Doctime field but how could one use this in a SQL query inconjuction with the docdate to see where a document haven't been converted within 48 hours.

Lindsay,
Please confirm the following.
In your business process do you copy Sales Order directly to AR Invoice without the Delivery step?
48 hours from which time? Creation of Sales Order or Delivery?
Thread about using DocTime for comparison
GetDate() in query generator doesn' return the time!

Time Machine for Solid State Drive

I recently installed a 480 GB OWC Elite solid state drive on aPCIe 2.0 card from Apricorn. Time Machine does not see the SSD. Any chance of getting it going again?

I recently installed a 480 GB OWC Elite solid state drive on aPCIe 2.0 card from Apricorn. Time Machine does not see the SSD. Any chance of getting it going again?

Does it shows current stats/can you tell me time period is it for seconds

set pages 500 lines 110
clear col bre buffer
col tablespace_name format a15 hea 'TABLESPACE'
col file_name format a24 hea 'DATAFILE'
break on tablespace_name skip
select tablespace_name, regexp_replace(file_name,'^.*.\/.*.\/', '') file_name,
sum(phyrds) reads, sum(phywrts) writes, sum(phyrds)+sum(phywrts) total
from dba_data_files, v$filestat
where file_id=file# group by tablespace_name, file_name
order by tablespace_name, file_name;

update on this
does the below query sghows present time period stats?
if yes can you provide query to find out stats (time period )for last two weeks.
thanks
set pages 500 lines 110
clear col bre buffer
bre on REPORT;
comp sum lab Total min lab Minimum max lab Maximum of reads on REPORT;
comp sum lab Total min lab Minimum max lab Maximum of writes on REPORT;
comp sum lab Total min lab Minimum max lab Maximum of total on REPORT;
col datafile format a45
select name datafile, phyrds reads, phywrts writes, phyrds+phywrts total
from v$datafile a, v$filestat b where a.file# = b.file# order by total desc;
DATAFILE...........................................READS.....WRITES......TOTAL
+DATA0/orcl/datafile/sysaux.262.612285947...........6807.....387337.....394144
+DATA0/orcl/datafile/undotbs1.261.612285943...........33.....105762.....105795
+DATA0/orcl/datafile/system.260.612285927..........10292......47710......58002
+DATA0/orcl/datafile/users.267.612285961.............297.......7528.......7825
+DATA0/orcl/datafile/users.266.612285961.............291.......6848.......7139
+DATA0/orcl/datafile/tst10.269.612743101............5237........135.......5372
+DATA0/orcl/datafile/tst10.271.612743105.............344........214........558
+DATA0/orcl/datafile/tst10.270.612743103.............296........182........478
+DATA0/orcl/datafile/tst10.272.612743107.............199.........87........286
+DATA0/orcl/datafile/tst10.273.612743109..............73.........46........119
+DATA0/orcl/datafile/tst10.274.612743111..............47.........29.........76
+DATA0/orcl/datafile/example.265.612285957............13..........8.........21
Minimum...............................................13..........8.........21
Maximum............................................10292.....387337.....394144
Total..............................................23929.....555886.....579815

Is there a change history for the STAT retention setting?

I've been told that the setting that controls the retention period for the STAT files is maintained by the ST03 transaction. (Export Mode / Collector and Performance DB / Workload Collector / Control Data.)
Is there any kind of change history kept on this setting, or any way to look at what this setting was in the past? We are on SAP Basis version SAPKB62061.
We had this setting originally configured to 72 hours in order to allow us a longer recovery time for problems with FireFighter activity capture. Now the setting is at 48 hours. This has actually caused us to be missing some FF activity. Had some failures on the FF Log Update job from last Friday night and when I went in to manually run the job to capture the missing FF activity, the STAT data is missing.
Need to see if I can determine who changed the setting, and when.
Thanks.

Welcome to the Apple Community William.
Unfortunately, there isn't anything like that available to you.

Automatic update value after time period passes

Hi,
In my application on page 8 I have an item which value is to be changed from one value to another depending on a time period. At first the item has value 1. Then we set it on value 2 and we also set a time period, for example 5 days. So after that period the value should automatically change on the value 1.
On page 1 there is a region with a list entries, subjects which have the value 2 set. I want this list to change according the change of value.
Does anyone know how to do this? I am a bit clueless...
Thanks
Regards,
Leila

There appears to be logical issue here.
a) The value will be incremented only when user visits the Page 8 . If user does not visit Page 8 then the change will not occur
b) If the user visits Page 8 but does not save the change (commit) even then the change would not come into effect.
Can this not be handled through a scheduled job that runs on the underlying tables at per-determined intervals/time? Say , once a day?
If the above 2 points do not affect you then you can try the Process route.
i) Write a OnLoad Before Header or After header process on Page 8
ii) In this process find out whether the required/preset interval has elapsed on not
iii) If the criteria is met then change the value of the Page 8 as well as Page 1 items using bind variable sysntax in the Process
:P12_ITEM := '2' ; -- or whatever you want.
:P1_ITEM := :P12_ITEM;How to figure out the interval? If it is date/time based then use SYSDATE. If it is something else , you need to figure out the interval calculation that works for you.
Regards,

Time periods

Hi there,
Outlooksoft 4.2 added the "formula" property to the time dimension and added in memebrs that added up a
few time periods. Processed the dimension, but not getting any data for the newly
created time periods for row 174/175.
Please advice.
Regards,
Raghu

Hi Nilanjan,
When trying to add a new row in time dimension using a formula property the data is not getting added.
Regards,
Raghu

Query for Old Data that does not match New Data within a given time period

Hello all,
One of the reports I need to create is for all associates who went from one department to another within a given time period. The way I ran this report in Reportsmith (pulling from our old system) was to compare the dept field from the beginning date to the dept field at the end date and it would give me those associate's that had moved. I had to do it this way b/c dept changes can happen using several different types of actions (supv change, promotion, etc.), none of them exclusive to just dept changes. We are now using Oracle HRMS and I need to create this same report with this system using SQL.
Does anyone know how to compare data between two different dates and pull the ones that don't match? Your help will be GREATLY appreciated!
Warm Regards,
Yasmin E. Alberto
HRIS Analyst
[email protected]

Hi, Yasmin,
In the sample data you posted, nobody changed departments between May 1 and May 11. In fact, there were no assignments of any kind between January 16 and May 17, so I wouldn't expect any output for that period.
A person (or rather, a duck) did change deptartments on May 20, so if you change the upper limit of the date range to
AND ASG_LAST_UPDATE_DATE < TO_DATE ('05/21/09', 'MM/DD/RR')you should see her.
You've probably noticed that this site likes to compress white-space.
To post formatted text (such as table results or indented code) type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.

I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer

I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer activates by phone. What is the solution to continue to use my program that I have had working on this computer for a long time?

You do not state which version... if CS2 read next
CS2 (and earlier) Activation Server replacement software
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup... AND Vista problems https://forums.adobe.com/thread/416347
If not CS2, read next
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Vendor evaluation report for a definite time period

Hi Experts,
Vendor Evaluation Summary Report required for the vendors for a definite time period. Output of the report should show the scores of vendors for criteria like Price, Delivery, Quality, Service and summation of all these scores.
Please let me know if any standard report is available which can fulfill my requirement.
Thanks in advance.
Kishore.

Hi,
ME6H report is not fulfilling my requirement since i require the output format in the form like vendor, vendor name, plant, price, delivery, service, quality and the summation of scores given to these criterias.
Thanks
Kishore.

WRT110: I want to create an access rule for one client for one application during one time period

I have a problem with one of the clients on my LAN which is running uTorrent to detriment of everyone else. It saturates the pipe. I have been unable to prod this user into bothering to tweak their settings to throttle bandwidth back and so have resorted to an access rule on the router which kicks that MAC address off during a particular time period during the day. But as irritated as I am about this slacker sense of outrageous entitlement, kicking them off entirely seems a tad heavy handed even for me.
So, In the router I can create a rule per MAC address and specify time. But is it possible to limit this to denying uTorrent ONLY? And if so what port or port ranges would I use.
Alternatively I already use a QoS setting for one of my VoIP TA's. Would I gain anything by degrading the application indirectly by creating a QoS = LOW for that port range? Again, I don't really care about any other application, just uTorrent and just that client. How much degradation is there really in setting QoS to LOW?

Well it wont make much difference, when you enable QOS service on your router. Yes it is possible to Deny uTorrent application from your Router. When you are Under "Application and Gaming" Tab, Under "Blocked Application" you will find "Application Name" , "Port Range" and "Protocol" so you need to input under Application Name "uTorrent" and under port range you need to input the port number which uTorrent application use and then under protocol select "Both" and click on ADD. Then again in Application you will find uTorrent , select and click on (>>) right arrow so it will block that application on your Router. By doing this it will block uTorrent from your Router.

Polling time period for cancelled statements

Similar Messages

Maybe you are looking for