"Poodlefaking" VISTA so Abap trial SP12 can work

Any Windows Gurus out there who know how to "fool" the abap tral netweaver that it's going to be installed on XP when it's actually being installed on Vista.
These days it's almost impossible to get a new computer (individual retail level - not corporate / work computers) WITHOUT some version of VISTA being pre-installed.
Running under vnware is only a partial solution and while it works it's not the ideal method of running these trials --especially on things like laptops which ususally only have 1GB RAM in them anyway.
I'm not an internal SAP developer so I can't understand why this version won't install on VISTA. There probably IS a good reason but it still seems a surprise to me as the trials are usually used by individuals on their own computers rather than large corporate customers - and individuals have been rather unwillingly forced to adopt VISTA much earlier than they would otherwise have done so.
I've got a Student copy of Windows Server 2003 which I'll probably install on the laptop (I'm pretty fed up with VISTA --but that's for another Forum) but there are I'm sure a lot out there who don't have that luxury of W2003 Server (actually quite a good OS and can be customized to run as a workstation) there's notes all over the web on how to do it.
So SAP guys --any idea on when VISTA support will be forthcoming for the trial previews.
Cheers
Jimbo

Hello,
I have installed ABAP trial on vista as Norman Schröder explained :
If someone is looking for a way to install the ABAP edition under Vista, I think this should be the shortest way.
I've tested it with the 32-Bit version (Ultimate and Business).
Steps
1. i've used the latest 1.4.2.x version of Java
2. go to the extracted archive
3. under the folder image rename NTPATCH to something else - e.g. NTPATCHold
4. copy the files of the renamed folder in your windowssystem32 directory
5. one file can't be overwritten, but that's ok
6. reboot your machine
7. go to the image directory of your extracted archive again
8. right-click on the setup-executable
9. choose execute as administrator
10. follow the instructions of the wizard
Finished
Once you have logged in, you will get an error message that the operating system isn't supported yet (or TAC sick). You can ignore that. Anyway the system should be working fine.
Perhaps someone else knows how to deactivate this check?
Regards,
Norman
it is working fine
Christophe

Similar Messages

Install NW7.0 ABAP Trial SP12 on Windows. how use/unpack these two files

Hello,
I tried to install the NW7.0 ABAP Trial SP12 on Windows XP. The download work properly I hope.
I extracted the part1-file to separate folder.
I have no idea how the second file can be extracted (part2).
So I started the setup and it worked well, but the programm to get the hardware key isn't on in the file system "saplicense.exe".
now my question is how do I have to use these two download files (extract, join together, how?) to get a complete installation source?
Can anybody help me?
Thanx in advance
Hans

Hi Hans,
When you extract the part1 the others are extracted too.
I use the program Winrar and works fine.
What program are you using to extract?

NetWeaver 7.0 ABAP Trial SP12 - installation problems

Hi
I have been struggeling a lot with the installation of NetWeaver 7.0 ABAP Trial SP12. I have installed and uninstalled serveral times with no luck - I have used the SAP clean up tool, RegCleaner and deleted SAP entries my self in regedit.
The installation only takes a few minutes now before the installation is complete and it asks me if I would like to start the app server and the SAP management console - when I then choose continue it fails.
Im pretty surprised that the maxdb is not installed - even though that I have uninstalled it before the reinstallation attempts.
I would like to start over from scratz - is it possible somehow (so that the maxdb is installaded again and so on) or is there something else that I should try?
I have tried to do the setup mentioned in the troubleshooting guide (https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37) and searched this forum, but I cannot make it work.
Kind regards,
Torben
D:SAPNSPlog.txt
(Oct 28, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file D:SAPNSPlog.txt for details.
(Oct 28, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Oct 28, 2007 6:40:46 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file D:SAPNSPlog.txt for details.
(Oct 28, 2007 6:40:46 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
D:SAPNSPhomeinstall.log
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:38:57
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:38:58
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _startSystem.cmd,D:SAPNSPSYSexe
un,startSystem.cmd)
Reading file D:SAPNSPhomeadditional_sw _startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _stopSystem.cmd,D:SAPNSPSYSexe
un,stopSystem.cmd)
Reading file D:SAPNSPhomeadditional_sw _stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _strdbsj2ee.cmd,D:SAPNSPSYSexe
un,strdbsj2ee.cmd)
Reading file D:SAPNSPhomeadditional_sw _strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:00
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: D:SAPNSPSYSexe
unjenqulib.jar
Adding to classpath: D:SAPNSPSYSexe
unjperflib.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartup.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupapi.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupimpl.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcfrog.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmc.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcsoap.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcswing.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsoapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: D:SAPNSPDVEBMGS00j2eejdbc (Exist=false)
CONFIGURATION: Old JDBC Path: D:SAPNSPDVEBMGS00j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: D:SAPNSP\_installTempj2eeINSTALLERCOMMONJDBCADA
CONFIGURATION: to : D:SAPNSPDVEBMGS00j2eejdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,D:SAPNSPSYSprofile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,D:SAPNSPSYSprofile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,D:SAPNSPSYSprofile,NSP_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,D:SAPNSPSYSprofile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,D:SAPNSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,D:SAPNSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
 finished successfully.
 Elapsed time: 00:00:02 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:03
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: D:SAPNSPhomestartEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "D:SAPNSPSYSexe
un/sapstartsrv.exe" -r -q -s NSP -n 00 -p D:SAPNSPSYSprofileSTART_DVEBMGS00_HUB7380B2F
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
 finished successfully.
 Elapsed time: 00:00:10 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:14
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: D:SAPNSPSYSexe
unjenqulib.jar
Adding to classpath: D:SAPNSPSYSexe
unjperflib.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartup.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupapi.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupimpl.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcfrog.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmc.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcsoap.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcswing.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsoapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: D:SAPNSPSYSexe
unstartsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F
Execute in current working dir: D:SAPNSPhome
Start external command...
| / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
 finished successfully.
 Elapsed time: 00:00:34 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:50
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: D:SAPNSPSYSexe
unsapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10
Stop instance in directory: D:SAPNSPSYSexe
un
Start external command...
28.10.2007 18:39:51
Stop
OK
28.10.2007 18:40:01
StopWait
OK
Process exited with rc: 0
Start external command...
28.10.2007 18:40:23
GetProcessList
FAIL: Unknown error, TCP connect failed in tcp_connect()
Process exited with rc: 1
ERROR: GetProcessList rc is not 4.
ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)
ERROR: Execution of step: >> StopSCSInstance <<
 failed. Execution returned: RC=100
 Elapsed time: 00:00:33 [HH:mm:ss]
Process exited with rc: 100

Hi Klaus
Thanks for your reply.
I should not be nessesary with the loopback adapter in my case - my pc is connected to a network and I can access localhost. However, I have tried with and without loopback adapter.
What I did (for each time I tried to install:
Deleted installshield folder
Uninstalled maxDB
Stoped SAPNSP_00 service
Deleted SAP and SAPDB folder
Ran the SAP reg clean tool
Then I made i reboot, and installed NetWeaver 7.0 ABAP Trial SP12 once again.
In my last case I installed the loopback adapter, rebooted once again and then installed the SP12 trial. When I installated the loopback adapter I assigned ip adresse 10.10.0.10 (and subnet mask 255.255.255.0) to it and added a line (10.10.0.10 NSP) to the hosts file.
But I still get error when installation has finished:
D:\SAP\NSP\log.txt
(Nov 1, 2007 7:09:14 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file d:\SAP\NSP\log.txt for details.
(Nov 1, 2007 7:09:14 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Nov 1, 2007 7:09:37 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file d:\SAP\NSP\log.txt for details.
(Nov 1, 2007 7:09:37 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
D:\SAP\NSP\home\install.log:
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:45
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:45
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_startSystem.cmd,d:\SAP\NSP\SYS\exe\run,startSystem.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_stopSystem.cmd,d:\SAP\NSP\SYS\exe\run,stopSystem.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd,d:\SAP\NSP\SYS\exe\run,strdbsj2ee.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:47
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: d:\SAP\NSP\DVEBMGS00\j2ee\jdbc (Exist=false)
CONFIGURATION: Old JDBC Path: d:\SAP\NSP\DVEBMGS00\j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: d:\SAP\NSP\_installTemp\j2ee\INSTALLER\COMMON\JDBC\ADA
CONFIGURATION: to : d:\SAP\NSP\DVEBMGS00\j2ee\jdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,d:\SAP\NSP\SYS\profile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,d:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,d:\SAP\NSP\SYS\profile,NSP_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,d:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,d:\SAP\NSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,d:\SAP\NSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
 finished successfully.
 Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:49
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: d:\SAP\NSP\home\startEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "d:\SAP\NSP\SYS\exe\run/sapstartsrv.exe" -r -q -s NSP -n 00 -p d:\SAP\NSP\SYS\profile\START_DVEBMGS00_HUB7380B2F
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
 finished successfully.
 Elapsed time: 00:00:11 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:08:02
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: d:\SAP\NSP\SYS\exe\run\startsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F
Execute in current working dir: d:\SAP\NSP\home
Start external command...
\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
 finished successfully.
 Elapsed time: 00:00:49 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:08:52
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: d:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10
Stop instance in directory: d:\SAP\NSP\SYS\exe\run
Start external command...
01.11.2007 07:08:52
Stop
OK
01.11.2007 07:08:52
StopWait
OK
Process exited with rc: 0
Start external command...
01.11.2007 07:09:14
GetProcessList
FAIL: Unknown error, TCP connect failed in tcp_connect()
Process exited with rc: 1
ERROR: GetProcessList rc is not 4.
ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)
ERROR: Execution of step: >> StopSCSInstance <<
 failed. Execution returned: RC=100
 Elapsed time: 00:00:22 [HH:mm:ss]
Process exited with rc: 100
Any ideas how I get it to work?
Thanks and kind regards,
Torben

Problem in Installation about SAP netweaver7.0 abap trial sp12

I tried to install SAPNW 7.0 ABAP Trial SP12 successfully before.
But I uninstall it last Sunday night.
And now I want to install it.
But It has some error and It cannot install completely.
The error log is copied below:
(Nov 13, 2007 11:01:18 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 13, 2007 11:01:18 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/David/LOCALS1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/David/LOCALS1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
Who can Help?

Hi David,
I see a 601 error in your post.
Have you checked the troubleshooting guide ?
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37
If you don't get the above link, you should check this post, the link is embedded here.
Troubleshooting Guide for NW2004s ABAP Trial Version
Regards,
Siddhesh

SAP Netweaver 7.01 ABAP Trial Version not working

Hello,
I am trying to load SAP Netweaver 7.01 ABAP Trial Version on VISTA. I am having two problems.
1. When I try to start NSP using SAP Management Console, I am prompted with a pop-up window labeled "WebService Authentication." The first parameter for User is automatically filled with value Home-PC\RESkater. It also asks me to enter Password. I do not know what to enter for password.
2. After I installed the SAP Netweaver 7.01 ABAP Trial Version, the download instructions says that I can sign on to system via web gui using http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000. However, I receive the error message stating "local host is not set up to establish a connection on port 8000 with this computer."
Can anybody give me any helpful tips that might resolve these issues for me?
Thanks.
Rae Ellen Woytowiez
Edited by: Rae Ellen Woytowiez on Jul 5, 2009 6:35 AM
Edited by: Rae Ellen Woytowiez on Jul 5, 2009 6:36 AM

Hi Rae,
Regarding issue 1, you to startup NSP, you need to remove the Home-PC\ portion of the username. So your username should only be RESkater. Then the password should be the same as the password that you use to logon onto the operating system for user RESkater.
Hope this helps...
Thanks,
Miguel

SAP NetWeaver 7.0 ABAP Trial - service Disp+Work.Exe does not start

Hi All,
I have installed SAP NetWeaver 7.0 ABAP Trial Version on Windows Xp sp2.
But when I start sap management console, Disp+Work.Exe shows stopped and i am not able to connect through SAP login.
Any ideas?
Regards,
Mindaugas

The hostname should have 13 caracters at maximum, you will need to remove your installation (use the process below), change the hostname and install it again. It happened with me and after done this process it worked fine.
How to uninstall :
- Drop database: In order to do that go to the Control Panel click on 'Add and Remove Programs' and look for 'MaxDB'. Click on 'Change/Remove' which starts the Installation Manager of the MaxDB. Click on 'Remove MaxDB Components', select 'All Components' and enter the database manager user 'control' and your <password>. Quitt the dialog popup with 'yes'.
- Stop SAPNSP_00 service Go to the Control Panel, click on 'Administrative Tools' and stop the SAPNSP_00 service.
- Remove in your file system the directories of 'SAP' and 'sapdb'. Go to 'Program Files/Common Files' and remove the directory 'Installshield'.
- Run the [clean up |http://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/nw/regcleantools.rar] tool for the registry, press the radio button for 'Uninstall Service', enter 'NSP' for SID and '00' for the number.
- Connect your PC to the network or install the loopback adapter.
- Reboot your PC.

SAP NetWeaver 7.02 ABAP Trial Version :disp+work.exe stopped

Hello all,
I am getting an error when trying to start NSP. msg_Server.exe is fine but the disp+work fails. Main error in work process i see is
M *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll").
Please let me know why i am getting this access error. Is it related to XUSER. I have DB-LOCALHOST/NSP active.
Below is from trace file.
Sun Feb 20 19:57:36 2011
ERROR => DpHdlDeadWp: W0 (pid 1300) died (severity=0, status=0) [dpxxwp.c 1522]
ERROR => DpHdlDeadWp: W1 (pid 8924) died (severity=0, status=0) [dpxxwp.c 1522]
ERROR => DpHdlDeadWp: W2 (pid 8704) died (severity=0, status=0) [dpxxwp.c 1522]
ERROR => DpHdlDeadWp: W3 (pid 8156) died (severity=0, status=0) [dpxxwp.c 1522]
ERROR => DpHdlDeadWp: W4 (pid 8568) died (severity=0, status=0) [dpxxwp.c 1522]
ERROR => DpHdlDeadWp: W5 (pid 6120) died (severity=0, status=0) [dpxxwp.c 1522]
ERROR => DpHdlDeadWp: W6 (pid 7056) died (severity=0, status=0) [dpxxwp.c 1522]
ERROR => DpHdlDeadWp: W7 (pid 9348) died (severity=0, status=0) [dpxxwp.c 1522]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
example W0 work process file
M Sun Feb 20 17:17:24 2011
M ThInit: running on host xxxxxxxx
M calling db_connect ...
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll")
Error 126 = "The specified module could not be found." [dlnt.c 255]
B *** ERROR => Couldn't load library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll'
[dbcon.c 5263]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1474]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 11060]
M
M Info for wp 0
M
M pid = 4044
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM

Hi,
As in the error message:
Couldn't load library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll'
Please check if the dbsdbslib.dll exists in the above path and users <sid>adm and sapservice<sid> have access to the same.
Regards,
Srikishan

ABAP Trial Version SP12:Error while setting up transport environment

Hi Folks,
I have successfully installed ABAP trial SP12 on my notebook(XP) and have been able to create some objects.
Thanks to very effective blogs by Manfred Lutz .
Now, I'm trying to set up the transport environment as per the blog but face the following error when I execute the step 'Distribute and Activate TMS Configuration'
Appreciate any help in solving the issue. I'm detailing below the error and the checks I had done.
******ERROR*************************************************************
ERROR:
Could not start transport control program tp
LONG TEXT:
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
I did the following based on the long text and after searching the forum:
*(1)*
Run program RSTPTEST to localize error.
The program gave the following result for the RFC destination 'CALLTP_WindowsNT':
********RESULT OF RSTPTEST***********************************************
"timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'#Timeout during connection setup (check that partner exists)"
*(2)*
Run the connection test in SM59 for destination 'CALLTP_WindowsNT':
The results were inconsistent. The connection test failed often but it was ok a few times.
The details of the connection failure are as follows:
*******CONNECTION FAILURE RESULTS******************************************************
Cancel
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' Timeout during connection setu
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host JayNB / sapgw00
DETAIL: no connect of TP D:\SAP\NSP\SYS\exe\run\tp.EXE from host JayNB after 2
COMPONENT: SAP-Gateway
COUNTER: 22
MODULE: gwr3cpic.c
LINE: 5873
RETURN CODE: 242
SUBRC: 0
RELEASE: 700
TIME: Sun Mar 23 11:07:53 2008
VERSION: 2
*(3) I then went to STMS and regenerated the RFC destinations and then ran the connection test. The result was OK.
Now, I again execute the 'Distribute and Activate TMS Configuration' step . It still gives the same error.
When I run the connection test in SM59, it results in error.
Further checks:***********************
(a) The permissions for folder SAP in the local directory were done as instructed in the blog.
(b) the directory path /SAP/trans/bin had the following files:
*TP_DOMAIN_NSP.PFL* : the last modified date changes every time I execute 'Distribute and Activate TMS Configuration'.
*DOMAIN* :The last modified date is in the past. It does not change.
Please inform how do I set up transport.
Jay
Code Formatted by: Alvaro Tejada Galindo on Apr 1, 2008 4:43 PM

Hi Krishna ,
Thank you for the suggestion.
I did as you suggested by inserting the mapping of ip and host in the hosts file.
and restarted the server,but I still get the same error "could not start transport control program tp".
Any other step that I'm missing.
Thanks again
Jay

Problem installing NW2004s ABAP Trial version on windows xp pro SP3

Good Day.
I have drawbacks installing Abap Trial SP12. When it comes to 89% ends abruptly.
I set up MS Loopback Adapter. The operating system is Windows XP Professional SP3. 1Gb RAM. Disk Space 50Gb Free.
I have installed thousand and once and presents the same mistake. I have followed the procedure to uninstall the MaxDB, Stop service SAP, Clear Folders installed and clean record with RegCleanTool. And nothing, I am grateful for the help they can give me.
Thank you.
(May 27, 2008 7:13:42 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 27, 2008 7:13:42 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllInstallationSteps(StepWrappe rInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.install(StepWrapperInstallFiles.java:2 68)
at com.installshield.product.service.product.PureJava ProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.getResultForProd uctAction(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitInstallableComponents(Unknow n Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOpera tion.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(May 27, 2008 7:18:44 PM), Install, com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 27, 2008 7:18:44 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllUninstallationSteps(StepWrap perInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.uninstall(StepWrapperInstallFiles.java :313)
at com.installshield.product.service.product.PureJava ProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.processActionsFa iled(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitInstallableComponents(Unknow n Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOpera tion.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Problem solved.
I had installed.
- Windows XP Pro SP3
- Java Runtime 1.6
The uninstall and install the following.
- Windows XP Pro SP2
- Java Runtime 1.5
Thanks.

SAPNW7 Abap Trial installation problem

Hi all,
     I'm trying to install the SAPNW7 Abap Trial SP12, the installation ends correctly but it skips the MaxDB installation step... so I've the application server installed, not the DB.
Any idea ?
Thanks in advance,
     Gianluca

Thank you for your answer, I tried without success... Anyway i re-installed my OS and then a sneak preview SP8... now it works.
Thanks again,
    Gianluca

Java Trial AND ABAP Trial

I succesfully installed the Netweaver 2004s ABAP Trial.
Now I want to also dig deeper into SAP Java, especially Web Dynpro Development.
What am I supposed to do? Can I download and install the Java Trial in parallel with the ABAP Trial? Can I run them both at the same time for example to access ABAP function modules from Java via RFC?
And what's that SAP NetWeaver Application Server, Java EE 5 Edition for? The Java Trial already comes with an app server...
Sorry for being stupid, I'm a SAP ABAP business programmer for many years now and am confused with all that system administrative wording...

Hi all
I have no success install ABAP and JAVA testdrive on same server. What versions have you installed?
I have installed the abap testdrive 04s SP11. All seems to be ok.
Now i try to install SAP NetWeaver 2004s Java Trial Version SP9 on same server, but I get some warnings and errors:
WARNING
The install parameter INSTPARA_DB is already defined (existing value IND, new value ADA ).
INFO[E] 2007-04-20 10:14:43
FSL-02077 File system export (share) saploc does not exist.
ERROR 2007-04-20 10:14:44
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-04-20 10:14:44
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Best regards
Thomas Madsen Nielsen

License for sap netweaver 7.0 abap trial version not availble on given link

Hi ALL,
I install sap netweaver 7.0 abap trial version almost three or four times and every time when i try to obtain a 90 days license for that by the link given in the installation guide, the sap system only shows only two options MBS for windows and CST (something like that) for linux.
But my problem is that abap trial version is working on NSP system. it did'nt take the license obtain by MBS.
Please suggest me what to do next or provide solution for my problem.
Regards,
Bhuvnesh

Hello. Read this /thread/948887 [original link is broken]
Regards.

SAP NetWeaver 7.01 ABAP Trial Version - You can only work in client 001

Hi BI Experts,
I have installed SAP NetWeaver 7.01 ABAP Trial Version and I could successfully login into the system.
When I run RSA1 Tcode I am getting error message You can only work in client 001. Can some please advice.
I appreciate all your input.
Regards,
OSR.

Hi,
Since BI tables are cross-client, BI can work only in one client. By default BI is configured for client 001.
If you want it in different client, you change it in BWMANDT field of RSADMINA table.
hope it helps.
Regards,
Pruthvi R

NetWeaver 7.0 ABAP Trial Version SP12 under Windows VISTA

Hi,
short question as I have to buy a new PC, is it possible to run New SAP NetWeaver 7.0 ABAP Trial Version SP12 under Windows VISTA and if yes, are there some installation instructions available? When does SAP plan to release an version which will officially support Windows VISTA.
Regs
Matthias

Matthais,
I have read many posts about install issues on Windows Vista. Please search on SDN for Vista related issues.
Regards,
Siddhesh

Problem installing NW2004s ABAP Trial version on windows vista business

Hi Gurus,
I am trying to install NW04s Abap trial version on Windows vista Business edition when I click on installer it's giving error "Precondition failed" . I wonder If we can install NW04s on win vista business edition.What version will work on vista business edition.
Please guide me how to install R/3 and BW on my PC which has windows vista business edition installed on it.
I would appreciate If anyone can help me out in this problem.
Thanks,
sat

Hi Sat
As far as i know presently vista does not support NW04s.But in future the NewYork version of netweaver will be supported by vista.
Reward poinst if usefull

"Poodlefaking" VISTA so Abap trial SP12 can work

Similar Messages

Maybe you are looking for