Poof! Header gone until you refresh

Hi. I am working on a Robohelp project (ver 10), and we are having a strange display issue. Our state office offers up a program to service personnel. The corresponding website holds/displays our help docs.
The issue is when you first arrive at the website itself (after you log in), you get our normal home page but our top header elemnts (Contents, Glossary, Index and Search) don't show up. When you refresh the page... waa laa, they appear. I have attached the 2 versions. Any ideas on what may be causing this?
Thanks for any help!!
-Paul

I would hazard a guess that the problem lays in the way the developers are calling the help.
If you open the help yourself by double clicking the start page, I think the help will open OK. That would support the problem being with the call.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

YouTube Music Videos - Blank - Loading - Errors out until you refresh

I've been having issues with music videos on YouTube with the latest version of Firefox. I would go to YouTube then browse the music and then select a video and it would play through the advertisement then video would be blank while trying to load then error. However if I refresh the page it works. This is quite annoying. Any other video plays without receiving this issue/error. It only seems to be Music Videos from what I have seen so far.
If I switch to any other browser this issue doesn't occur.
I have also asked my friend if his does the same thing and he also Firefox and what do you know same thing, different ISP, also only has this issue with the browser Firefox.
I hope the Firefox team could find the issue and release a fix with their next update.
Thanks.

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

On iOS 7 Ipad Safari, when tapping the a text input on my site, the keyboard opens then freezes the OS for about 2-5 seconds then finally scrolls to the input. After this happens once, it never happens again until you refresh the page

Notes:
- This does not happen in any other mobile browser or any previous iOS Safari. It happens both on the ios 7 ipad.
- i Have 150 inputs (my page size is over 400kb)

Hello!
I have seen many people asking about this error and if you are a developer, check this answer at stackoverflow. It's a very simple workaround but it works perfect:
http://stackoverflow.com/questions/19335109/ios-7-safari-os-locks-up-for-4-secon ds-when-clicking-focusing-on-a-html-input/23606434#23606434
Don't forget to upvote the answer if you are a stackoverflow member
Best regards

What has your network waited to do until you've gone on vacation?

I lost *2* disks from a RAID 10 array - luckily it was a 14 disk array and they were not part of the same pairing. Although, that was just a day trip to San Antonio, for work, not really a vacation.
The most grievous thing that has happened when I've been on vacation was a power outage at a branch office and I kept getting calls and voicemails wanting to know if they could go buy a UPS and run off that while they waited for the power to come back on....

It always seems like things on my network wait to break until I'm out of reach.
The latest event:
After just leaving for vacation I got a call from some of my sysadmins that the phone system had gone down. About to get on a 6-hour plane ride to Hawaii I walked them through the troubleshooting steps to attempt to resolve it.
The solution? One of the modules had died and we needed a new one ordered overnight. Luckily my crew was able to install it without me being there, but it definitely put a knot in my stomach for the entire trip. "What else is going to go wrong?"
What disasters seem to have waited until you went on vacation to occur?
This topic first appeared in the Spiceworks Community

How can you make an image change every time you refresh a page?

Hi.
I've recently redone my website and was wondering how I could make the image on my main page change every time you refresh the page?
Like is there a certain script you can use?
Here's my website
www.liamfawcett.com
Thanks

Copy & Paste the following JavaScript code between the <head> and </head> tags in your HTML document, in Code View of course.
<script type="text/javascript">

</script>
In the array, change URLs (http://www.example.com) to your own links. Change images (some_image.gif) to your own images.
Save page. Preview in browser. Hit refresh (F5 or Ctrl+R) to see the images change.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

On logged in sites when i click the back button im no longer logged in until i refresh

On sites where i am logged in, eg forums or sites where i have saved the layout such as the BBC website whenever i click the back button to go to the previous page i am no longer logged in and my preferences have been cleared and the page has gone back to its defaults state. if i refresh the page its all back to how i set it and i am once again logged in.
== This happened ==
Every time Firefox opened
== Friday evening/Saturday morning.

Hello Jeni.
That's how Firefox works. When you go ''back'' to a page where you were not logged in yet, you get logged off. Although it doesn't always work and if you refresh the page you get logged in again.
The basis of this behavior is that clicking "Back" will take you to a page that is stored in cache, and Firefox doesn't have (in most cases) to redownload the page information again (this is good because it speeds up browsing). You can disable this behavior, but it will mean that every time you press "back", Firefox will re-load the page again, and it will not be instantaneous like it is now.

I keep getting a message "safari cannot open page [page name with header information] because you are not connected to the internet.

I keep getting a message "safari cannot open page [page name with header information] because you are not connected to the internet. Then I check CNN for a time stamp, and I am connected to the internet. I have reset everything suggested in other posts, ensured any other device that could be hogging bandwidth is off, the router is reset, the iPad is reset. The other devices are not having this problem, and it happens on both places I use the iPad, the university library, (getting a second degree after a change in a long time career and at home. Any insight into this issue would be appreciated.

Saing yu tried everthing provides little information to us. We do not know what you tied.
Have you tried:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on your router- Resetting network setting: Settings>General>Reset>Reset Network Settings
The toubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does you iPod conenct to other networks?
- Do other devices connect to your network?

Regarding collecting messages until you get particular payload

Hi All,
I am having below requirement,
I am getting several messages from source, i need to collect all the messages, until i get TRAILER message
Condition is " COLLECT THE PAYLOAD UNTILL YOU GET DTS IN PAYLOAD(TRAILER)". so we need to collect header message and data messages untill you get trailer message.
message1(Header message which contains DHS)like below
    20090604034447338isc                 DHS64    500d3100033d705050258002f86300
message2(data message which contains DDS) like below
           20090604034447338isc                 DDS64    50031s000337050502580d0286300
           20090604034447338isc                 DDS64    5003100033705050d25800286300
Message3(data message) like below
           20090604034447338isc                 DDS64    500310003370505025800286300
           20090604034447338isc                 DDS64    500310003370505025800286300
           20090604034447338isc                 DDS64    5003100033d7050502580f0286300
Message4(trailer which contains DTS) like below
           20090604034447338isc                 DTS64    500310003370505025800286300
So 4th message contains 3 charcters DTS, now i need to end the collecting messages in loop and need to send the collected messages to target.
Presently i am using PI7.1 which contains some patters to use as XPath for end condition purpose. I am using Contains Patter(CP) in loop end condition. according to my understanding the collection in loop has to end when it find DTS in message. but it is not working. Please share you ideas whether Contains Patterns suitable for my requirement
or not and is there any other better approach for this requirement?
Thanks & Regards,
Madhusudhan

Hi,
Thanks for your valuable reply,
As you told i implemeted the logic for loop end condition like below
Value CP 'DTS'
Value is condition variable in xpath according to PI7.1.
Now according to above xpath, if DTS found in payload at any place. The loop has to end, but now even there is no DTS in payload the loop is getting complete and messages are going to target.
Thanks,
Madhu
Edited by: Madhusudana Reddy on Aug 5, 2009 9:13 PM
Edited by: Madhusudana Reddy on Aug 5, 2009 9:24 PM
Edited by: Madhusudana Reddy on Aug 5, 2009 9:25 PM

Using another web browswer until you get rid of Firefox 4. What a disaster! When do you plan to fix it.!!!

What a nightmare Firefox 4 have been. I have warned everyone else not to upgrade to this horrible browser. Which is sad, since I used to recommend it to everyone. I don't like IE or Safari, but I like them better than Firefox 4 so I will be using another browser until you fix whatever it was you did to the new update. Very inconvenient to have to change all my bookmarks and info that I have used on Mozilla since it first came out. I hope you are working on it since there is page after page of similar responses. When can we expect this to be fixed?
Lori
Why do I have pop-up everywhere now, my home page changed, I have some stupid mp3 toolbar installed(which I will get rid of). What were you guys thinking?

Hello,
You'll have to be more specific. Do you know the name of it? If not, go to your '''about:support''' page by entering it in your address bar and pressing enter, or going to:
* Help (or [[Image: New Fx Menu]] > [[Image: Help-29]]) > Troubleshooting Information
Then click "Copy Text to Clipboard" and paste that information here.
If you don't have many extensions and don't mind going to download them and setting them up again, you can '''Reset Firefox'''. The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
'''''Note:''' After resetting Firefox, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Reset Firefox – easily fix most problems]] article for more information.
To Reset Firefox:
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
#*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
#At the top right corner of the page, you should see a button that says "Reset Firefox" that looks like this: [[Image:Button reset]]. Click on it.
#Firefox will close and reset. After it is done, Firefox will show a window with the information that is imported.
#Click Finish and Firefox will reopen.
Did this fix the problem? Please report back to us!
Thank you.
EDIT: How did you update your Firefox? If you downloaded a new copy but didn't download from the official Mozilla website:
* https://www.mozilla.org/en-US/firefox/new/
* https://www.mozilla.org/en-US/firefox/all/
Then you will need to uninstall and reinstall Firefox by downloading a new copy from one of those two links.

HT4847 You have now exceeded your iCloud storage, including an additional amount provided to allow you to continue receiving email. As a result, you will not be able to send or receive new email messages with your iCloud email address until you free up st

You have now exceeded your iCloud storage, including an additional amount provided to allow you to continue receiving email. As a result, you will not be able to send or receive new email messages with your iCloud email address until you free up storage space or buy more storage. I have 20GB remaining. WHat is the issue here?

Today I received the same message but have 4.6gb available from a total of 5.0gb. I also received the same message when i first set up my icloud account and icloud was virtually empty. Unfortunately the only way i can see to contact apple is to pay for a telephone call. If anyone knows what is going on i would appreciate knowing.

Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the online.

Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the only one.

Use the search feature and type in Flash and there are like thousands of posts on this.
You seem to think you are addressing Apple with your post. This is a user forum and we are all users just like you.

Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

Have you printed to this printer from 10.10 before? If so, check your connections.

There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. Error message in PhotoShop CC

Printing from PS CC worked fine today. I made no changes to preferences. In between working with 2 projects, the first one printed fine, the second gave me this Error Message.
There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
Now I've checked for updates for my printer, reset my printer, reset PS CC preferences, picked my printer as Default and Last Used, and rebooted. I've followed all the recommended fixes for this issue I could find here and on the internet. I can print fine from any other program. Alas, the error message keeps popping up and I can't print.
PS CC is up to date
Running OS 10.10.2
HP Printer updated
Help?

Have you printed to this printer from 10.10 before? If so, check your connections.

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Help! Safari won't fully load web pages until I refresh! Why and any suggestions on how to retify this??

For several months now safari has not been loading web pages properly (not them all, it is a bit random, but maybe every 3rd or 4th page I open?). The blue loading bar gets to about 1.5 inches from the end and stops. I can then click on the bar and refresh and it loads no problems but this is highly inconvenient and I can't seem to fix it.
I have reset safari, updated all software, I am on a mac book pro, I have Version 5.1.5 safari.
Would this be an internet problem rather than a software problem? How would I check.
It's not very convenient when you're doing something important like trying to get tickets for an event and then it jams, and you know you need to refresh but if you refresh you've lost the tickets...
Any suggestions welcome

Hi Krisztina ..
Using OpenDNS can help when pages won't load properly.
Use OpenDNS for better speed, more security, includes anti phishing filters, prevents browser redirects, blocks the flashback trojan, and it's free.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
Apple suggests using OpenDNS here > Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Poof! Header gone until you refresh

Similar Messages

Maybe you are looking for